Unable to bringup IT106 screen in IT21 for USA

Hi All
We are using MP002100 and screen 2010 for IT0021. I am trying to store the SSN details of the Family Members. I understand that this can be done by activating the respective fields in IT0106 and I have done it. But now I am unable to pull up the sub screen MP010600 screen 0100 for USA. I tried using the feature P0106 by specifying the DYNNR as 0100, MOLGA as 10 and the left the screen as Blank.
Additional Info:-We also have MP010600 Screen 0200. If I give the MOLGA 10 under screen 0200 in feature P0106, The filed is coming up in IT21 but the Filed Lable reas SIN, which is for Canada.
Please tell me how to pull up MP010600 screen 0100 for MOLGA 10

Do you maintained the feature IVWID and the steps in Personnel Management Personnel Administration Customizing Procedure Infotypes Assign infotype views
Eg. VIND=10 (value from IVWID), IType=0021, View= MP010600 and screen 0100.
Regards,
RT

Similar Messages

PLEASE HELP! My iPod is stuck on a black screen but everytime I restore it through iTunes the screen comes back for a short period of time!

I own an iPod Touch 4g 8gb. Ever since Wednesday August 12th 2012, the screen has had a problem -- it is black. Pitch black. I can tell that it still works -- by sliding my finger down to unlock it I can still hear the lock sounds. My online research told me to reset it and put it in DFU Mode -- but that didn't work. So I connect it to iTunes and restore it to iTunes and after the restoration, the screen comes back -- for a few miniutes. I did this twice and the second time was longer than the first. I have not adjusted any settings that could have anything to do with this.
So... What to do here? Can someone explain exactly what the problem and it's recovery-processes are?

I'm not a fan of DFU mode because I've never seen it recommended by Apple.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I am unable to change my screen brightness using the fn+f2/fn+f3 keys. i understand that it can stil

I am unable to change my screen brightness using the fn+F2/fn+F3 keys. I understand that it can still be adjusted differently but I want this way to work. Also whenever I change my volume using the fn+F7/fn+F8/fn+F9 keys, the little on-screen display doesn't pop-up any more. I would like to fix this and any help would be greatly appreciated.

Hi
You have a couple of options as I see it please find the web link given below and the steps might help you to fix your issue on the unit.
Resolving Problems with the Brightness of the Display
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Unable to open my Nemo's reef for last 4days. Has anyone else had this problem

Unable to open my Nemo's reef for last 4days. Has anyone else had this problem. It seemed to occur after the last content download

I too have been unable to open Nemo's Reef properly since January 31 2014. I have used it without problems since August 2013. I recall it self updated around midday and then ever since it's failed to get beyond the opening page of what's in the reef. If I tap the back button it goes back to the iPad screen of apps. If I tap to buy a suggested plant it also disappears from the screen. However I have managed to collect my pearl gifts/sand dollars daily on that initial screen.
I just cannot buy a plant or get out of this screen without the crash. Just going nowhere.
Rather frustrating at level 37 and about £80 overall spent in pearls to build the reef and get beautiful fish whilst recovering from surgery past six months. I have found the game very calming. I've really enjoyed this game which past level 8 is surely intended for adults and more strategic play.
This morning I switched on and there was instead a full screen advert. I hit the x button and it just crashed again. Now it shows my own reef on loading, but instantly crashes even faster.
Is this an iPad problem or an apple problem. From an Apple point of view FWIW I have noticed my screen gets very hot when playing games such as Bejewelled Blitz too.
It would be good to know if others have this nemo or/ and overheating iPad problem too. What is the solution?

HT1386 unable to download application screen pops up whenever I try to download an app.

Please help!!!!!
Im getting "unable to download application" screen pops up whenever I try to download an app.

'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b9 a1e18e3b",
processorArchitecture="x86".
Please refer to Help and Support for more information. HRESLUT: 0x800736FD.
A couple of questions.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?

Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?

For a few users, since some point in OS X 10.6 Snow Leopard, there has been an occasional problem when trying to wake from sleep if you have Bluetooth enabled for the keyboard, Magic Mouse, Trackpad, etc.
The solution for me that worked 100% of the time was: System Preferences>Energy Saver and set 'computer sleep' to 'never'.
For me, the problem ran intermittently through 10.6.something, all of 10.7 and now, finally, seems to be resolved in 10.8.2.

My iPhone is stuck in the recovery mode after downloading iOS7. i Tunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

My iPhone 4 is stuck in the recovery mode after downloading iOS7. iTunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?

Hi Imw7996,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Judy

XIpod Touch in death spiral - unable to access main screen

My daughter's Ipod Touch, 4th gen needs a version update, but I'm unable to synch it to my Mac for the upgrade as the Ipod memory space is full. I'm unable to access the Ipod main screens to delete apps to free space...the death spiral (blank screen w/the "thinking" circle) is all that appears. Any ideas to break it out of the death spiral to reboot?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Unable to activate SAP HR Approval Service for Fiori

Hi Fiori Experts,
I am unable to activate the service: /GBHCM/APPROVALS for fiori apps in /iwfnd/maint_services..
It would be very helpful if any one can suggest the reason for the error
Please find the attached screen shot for reference
Thanks
Sreenivas

Hi Sekihara,
We have currently below service pack levels
In backend : Software Component :GBHCM003
                   Release : 600
                   Level : 0010
In frontend :
                    Software Component :UIX01HCM
                    Release : 100
                    Level : 0002
Please find the below screen shot for reference
Backend:
Frontend
Thanks
Sreenivas

Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

VLD-1119: Unable to generate Multi-table Insert statement for some or all t

Hi All -
I have a map in OWB 10.2.0.4 which is ending with following error: -
VLD-1119: Unable to generate Multi-table Insert statement for some or all targets.*
Multi-table insert statement cannot be generated for some or all of the targets due to upstream graphs of those targets are not identical on "active operators" such as "join".*
The map is created with following logic in mind. Let me know if you need more info. Any directions are highly appreciated and many thanks for your inputs in advance: -
I have two source tables say T1 and T2. There are full outer joined in a joiner and output of this joined is passed to an expression to evaluate values of columns based on
business logic i.e. If T1 is available than take T1.C1 else take T2.C1 so on.
A flag is also evaluated in the expression because these intermediate results needs to be joined to third source table say T3 with different condition.
Based on value taken a flag is being set in the expression which is used in a splitter to get results in three intermediate tables based on flag value evaluated earlier.
These three intermediate tables are all truncate insert and these are unioned to fill a final target table.
Visually it is something like this: -
T1 -- T3 -- JOINER1
| -->Join1 (FULL OUTER) --> Expression -->SPLITTER -- JOINER2 UNION --> Target Table
| JOINER3
T2 --
Please suggest.

I verified that their is a limitation with the splitter operator which will not let you generate a multi split having more than 999 columns in all.
I had to use two separate splitters to achieve what I was trying to do.
So the situation is now: -
Siource -> Split -> Split 1 -> Insert into table -> Union1---------Final tableA
Siource -> Split -> Split 2 -> Insert into table -> Union1

Screen exit MEREQ001- for Transactions ME51N/Me52N/ME53N

Hi,
I have implemented the Enhancement MEREQ001 to add a new tab for Purchase Requistion screen.
Requirement for me is to show the same data in the newly added tab for all line items and also to save the same data in EBAN table.
I am facing a problem while saving the data. In EBAN table, the data was saved for all line items. But the custom added field values are saved for only the line item displayed.
I ll explain with an example for better understanding.
I have created a PR with 2 line items ITEM1 and ITEM2
When i saved the data when ITEM1 is displayed, EBAN have custom added field values for ITEM1 but not for ITEM2.
The same way, if I save data when ITEM2 is displayed, EBAN has custom added field values for ITEM2 but not for ITEM1.
Now, my requirement is to get the both line items ITEM1 & ITEM2 updated with custom added field values in EBAN.
Has anyone faced this kind of issue.
Please reply back.
Regards,
Sreekanth.G

Hi,
Use BADI 'ME_PROCESS_REQ_CUST' to copy item 1 custom fields data to item 2 custom fields data.
Regards,
Hemanth

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

When I click on safari button a blank safari screen comes up for one second then minimizes. can't use safari?

When I click on the safari button a blank screen comes up for about one second, then minimizes. I have checked wi-fi connection, and all is fine. Facebook and maps apps still work.

Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Ver 10.0.1. Entire screen blacks out for a few seconds when scrolling.

I recently updated to Reader X 10.0.1. Now when I scroll through a large document my entire screen blacks out for a few seconds. So far it has recovered. I get an error message saying that the NVidia nView driver (ver. 135.50) has stopped responding. I am running Windows 7 Pro on an HP Laptop, feeding to a large Samsung monitor. Never happened prior to this update. Any fixes/ideas?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Unable to bringup IT106 screen in IT21 for USA

Similar Messages

Maybe you are looking for