Unable to browse internet over wifi on my iphone

I am unable to browse internet on my iphone 4 and ipad3 simultaneously over wifi.
Both iphone and ipad show connected over wifi but only my ipad can connect to internet. Along with ipad I have no problem in connecting laptop and my other android phone over wifi and browse but iphone won't.
I am using talktalk broadband. Please help

Does your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks?  If so, then I'd say your router is the culprit.

Similar Messages

  • TS1398 Having trouble accessing the internet over wifi on my iPhone 5.

    Hello, I have a nearly brand new iPhone 5 in perfect condition. So far, I have had not problems with it, however recently, I have had major issues connecting to the internet over wifi. Some things that would happen would be apps that require an internet connection time out, and pages don't load in safari, and the reliabilty would be off and on.However after switching the wifi off and going off of my 4g, the connection was fast and I experianced no problems. I am positive this is not a problem with my home network, because my household had lots of people and LOTS of electronic devices that connect to the internet with no problem. I also have an ipod touch 4th generation that has been able to connect and browse the internet with no problem, it's just the iPhone that is being slow. Also, this isn't really a consistant pattern, occasionaly I will get it to work for like five minutes with no problems then it just time out on whatever it's doing.
    Any help would be appreciated.

    Well it might still be the Mavericks Wifi issue... slow throughput on an apparently strong signal is part of its behavior from what I've read.  So to recap You got a signal (fairly Strong) appeared to be connected but Safari could not display the welcome page.
    I'll share something I do in a case like that. I use Firefox. I keep a copy of Firefox, Opera and Chrome on my laptop because some sites use non-standard web code and the different browsers "play" better with the server/router. Safari is a lot better than it was when it first stared out but there are some sites put together (especially financial sites) that just won't let Safari play (they can code to prevent that).
    If you have time between flights download Firefox and give it a shot... at this you have nothing to lose.
    Good Luck.

  • After Update Unable To Browse Internet On WiFi

    Since the update to my Charge I am unable to browse the internet through a WiFi connection. All I get is "Web Page Unavailable". I know that the connection is working correctly as I use it on other computers. Not to mention when I am connected to the WiFi connection, the apps i have installed on my Charge function correctly such as the App Store and I am able to download and update apps through Wifi. The only issue is when I am trying to use the browser to connect to web sites. I have tried the stock browser as well as Dolphin with no luck. Help!

    Thanks JCO 23
    I too was unable to browse the internet on WiFi.  I tried many of the solutions I found on different discussion threads.  I read your solution and decided to give it a try.  Unbelievable, I did have text in the proxy setting.  Checking on my PC I determined I did not require a proxy number.  So, I erased the proxy number and I am now able to access the internet through WiFi.
    Thank you very much for posting this solution.               

  • Connected with wifi but unable to browse internet on my iphone 4

    my iphone 4 is connected with wifi anf it shows proper connectivity but i am unable to browse internet on my device ,i have tried many things suggested by apple support forum and nothing has worked for me so for. i have reset settings for network many times. also this wifi is working fine on my mac and other IOS devices.

    I would verify each smtp setting in the settings email account with the settings
    provides by the email provider to verify that those still matched

  • Unable to download apps over wifi

    iPhone 64GB running ios 8.1
    unable to download app" over wifi but over 3G it works fine
    tried signout apple id and restarting the phone

    Hi saymjuke,
    Welcome to the Apple Support Communities!
    I understand that you are trying to download applications from the App Store on your iPhone but cannot unless you download them using your cellular connection. In this situation, I would suggest the troubleshooting steps outlined in the attached article. I know your issue is not the same as what is outlined in the article, but the steps within should still assist you. Please let me know if the issue continues.
    Can't connect to the iTunes Store - Apple Support
    Cheers,
    Joe

  • Have updated my ipad2 to IOS6 , but now Iam unable to make facetime over wifi ...it keeps displaying connection lost. please help

    Have updated my ipad2 to IOS6 , but now Iam unable to make facetime over wifi ...it keeps displaying connection lost. please help.
    Also my facebook application is also not working .it just hangs itself. tried uninstalling and reinstalling. yet it isnt working. please help

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

    Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
    Making sure everything is allowed through firewall
    Rebooting phone/laptop/router
    Disabling ipv6
    Disabling all networks except the one curently on
    Re-installing iTunes
    Restoring iPhone
    No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • HT1414 i am unable to switch on the wifi on my iPhone 4s? I have tried all of the above ways.

    I am unable to switch on the wifi on my iPhone 4s.
    I have tried restart, restore, update etc.
    But its still not working.
    Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Unable to access youtube over wifi

    Hi,
    I have recently got BIS activated on my blackberry bold 9780. I have wifi at home which I use for browsing faster. I have two questions around this.
    When I connect the device to wifi, is there any way to know (or set) which connection is being used for communication (BIS or wifi) ?
    When I switched off radio and keep only wifi on, I am able to browse all pages except youtube.com. With youtube, I get an error message 'Cannot visit web page page when radio is turned off. Please turn the radio on and try again'
    Suppose I am abroad with no intention to pay stratospheric roaming charges, is there some way to make the device work over wifi?
    Thanks for your inputs.
    Regards,
    Aroop
    Solved!
    Go to Solution.

    If both Network Connection and Wi-Fi are present, your phone will default to the Wi-Fi automatically.  To verify this, connect to a Wi-Fi network and on your homescreen follow Manage Connections>Service Status.  If you look under BlackBerry Internet Service, it should say Wi-Fi.
    Browsing via Wi-Fi should work for youtube as well as other sites.  Do you have your Data Services turned on?  In later OS versions, you should be able to browse even with Data Services turned off, but let's toggle that to see what happens.  From your homescreen, follow Manage Connections>Networks and Connections>Mobile Network and make sure Data Services is set to on.  Try that and report back with your findings.  If all else fails, remove your battery while your phone is turned on then replace that.  That's been known to correct many issues.
    Keep us posted on your progress. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Unable to browse internet on a domain user's computer through ASA 5503 Firewall

    Dear All,
    I am trying to configure my new firewall for the last one month but still unable to fix it. I have a domain in windows 2012 standard edition and the firewall with unlimited license. Here is the output of show startup-config. Please note that prpgb.org is my local domain.
    prpgbasa# show startup-config
    : Saved
    : Written by enable_15 at 02:50:45.169 PKT Thu Nov 20 2014
    ASA Version 8.2(5)
    hostname prpgbasa
    domain-name prpgb.org
    enable password AExqpLntfuzsVQrq encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
     switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
     nameif inside
     security-level 100
     ip address 10.0.0.1 255.0.0.0
    interface Vlan2
     nameif outside
     security-level 0
     ip address 202.142.XXX.YY 255.255.255.252
    ftp mode passive
    clock timezone PKT 5
    dns server-group DefaultDNS
     domain-name prpgb.org
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 202.142.XXX.YZ 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 10.0.0.0 255.0.0.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet 10.0.0.0 255.0.0.0 inside
    telnet timeout 5
    ssh 10.0.0.0 255.0.0.0 inside
    ssh timeout 5
    console timeout 0
    dhcpd dns 10.0.0.2 255.0.0.0
    dhcpd dns 208.67.222.222 208.67.220.220 interface inside
    dhcpd lease 86400 interface inside
    dhcpd domain prpgb.org interface inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:23c0af4b2ddf9e925f83ce13909ab900
    prpgbasa#
    You all are requested to have a look into the problem and suggest me the modifications.
    Thanks

    Dear All,
    I have solved the issue. I have done the following in-order to browse internet on domain user computers. Here are the steps
    1. I have disabled my internal DHCP server in the domain.
    2. Then I have configured the ASA DHCP server in the default IP address scheme i.e. 192.168.1.100-200
    3. I have Connected my ASA to a switch first then from there I connected a cable to my Domain's Server WAN interface. The LAN (192.168.1.2)interface of the Domain server is also plugged into the same switch. 
    4. I am using my Domain Server's DNS for name resolution and forward queries which are not served by my domain to open dns server.
    It works perfectly so far but before applying or setting up the entire netowrk i want your help to look into the configuration file for corrections if i am making any mistakes. Thanks again for your help and here is the output of show confing.
    prpgbasa# show startup
    : Saved
    : Written by Ghaffar at 02:11:24.319 PKT Mon Dec 8 2014
    ASA Version 8.2(5)
    hostname prpgbasa
    domain-name prpgb.org
    enable password AExqpLntfuzsVQrq encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
     switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
     nameif inside
     security-level 100
     ddns update hostname PRPGB.ORG
     dhcp client update dns server both
     ip address 192.168.1.1 255.255.255.0
    interface Vlan2
     nameif outside
     security-level 0
     ip address 202.142.XXX.YY 255.255.255.252
    ftp mode passive
    clock timezone PKT 5
    dns domain-lookup inside
    dns server-group DefaultDNS
     name-server 192.168.1.2
     domain-name prpgb.org
    object-group network obj_any
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    route outside 0.0.0.0 0.0.0.0 202.142.XXX.YY 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa authentication ssh console LOCAL
    aaa authentication http console LOCAL
    aaa authentication serial console LOCAL
    aaa authentication enable console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    telnet 192.168.1.0 255.255.255.0 inside
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh timeout 5
    console timeout 0
    dhcpd address 192.168.1.100-192.168.1.200 inside
    dhcpd dns 192.168.1.2 interface inside
    dhcpd lease 86400 interface inside
    dhcpd domain prpgb.org interface inside
    dhcpd update dns both interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    username ABC password FL01QCj0LaLWTID0 encrypted privilege 15
    class-map inspection_default
     match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
     parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
     class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:7c4930a079158c0cb10a42813d3690cd
    prpgbasa#
    Please suggest me if there are any recomendations.
    Thanks in advance.
    Ghaffar

  • No internet over wifi, bizarre problem

    Summary:
    I cannot access the internet via wifi, but can with a wired connection. There is one other computer on the network, connected via wifi. It has access to the internet. I can file share and VNC to this other computer either wired or wireless.
    So everything works exactly as I'd expect, except when I type in "www.apple.com" or whatever, the browser hangs and eventually says the server couldn't be found. Nothing outside of the network resolves, when I'm connected via wifi, except the machine on the local network (and the router/AP itself).
    I've rebooted my machine, and in safe boot, and I've rebooted the router. So I'm totally at a loss how this is even possible. Nothing has changed with the laptop or the router, or the network, in 3-4 days.

    Searched for "network reset" and found suggestions to delete the folder:
    /Library/Preferences/SystemConfiguration
    I did this, restarted and now I have internet via wifi again. I don't understand why or how it stopped working in the first place let alone how this fixed it or even if it did.

  • Ea3500: no internet over wifi

    Hi,
    for some reason my ea3500's wifi network will have no internet connection occasionally, I am still able to access the router's gateway over wifi, even stream videos with plex. But no internet access. TheEthernet also worksfine..

    @strech1
    One of the probable causes of your concern is a corrupted firmware in your router. Doe your router have an EA Series Linksys Smart Wi-Fi Firmware or a Classic EA Series Cisco Connect Firmware? It would be best that your router have the latest EA Series Linksys Smart Wi-Fi Firmware installed. It would be best to update the drivers of the wireless adapter installed on your wireless computer.

  • Unable to browse Internet after upgrading to IOS 6

    After upgrading to IOS 6 (6.0.1), I have this strange issue.
    My iPhone suddenly after every alternative day stops browsing Internet. It connects to wireless succesfully but fails to browse Internet.
    I need to reset my network setting and reconnect to the network. But this is annoying any suggestions

    Does your phone receive a valid ip address from your router?
    Does it work fine when connected to other wifi networks?  If so, then I'd say your router is the culprit.

  • Unable to browse internet with wag150n

    I recently installed a wag-150n wilress-N ADSL2+ Gateway. I replaces a working 2WIRE router with this one. I ran the setup CD, and it said it completed successfully. I am unable to browse the internet wirless;y or with a wired connection.
    If I try and ping a website, say www.google.com,  it replies successfully but I cant browse the internet.
    Both wired and wirless connections are getting an IP address. I had changed the IP ad DHCP ranges to 192.168.0.0/255.255.255.0 , so that the router is at 192.160.0.1. The clients are starting at 192.168.1.100.
    Help!!!!

    If you are able to ping the websites address it means your Gateway is configured for Internet Access...Try to adjust the Browser settings...
    Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...See if you have Internet Access...
    Also if you have changed the router's address to 192.168.0.1, your clients should start at 192.168.0.100...

  • How can i use facetime over wifi on my iphone 4?

    how can i use facetime on wifi on my iphone 4?

    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    iOS: Using FaceTime

Maybe you are looking for

  • Clip Notes streaming export causes Reader media clip error

    MacPro HDV captured into PPCS4, export OK to Adobe Clip Notes streaming, uploads .mov file to my FTP site OK. The .mov clip plays fine locally in QT. When I open the clip notes pdf in Acrobat 9 Reader for Mac or Acrobat 8 Pro on Vista, both give the

  • How do I update my blog on my site?

    So I recently downloaded Wordpress and I got it all set up and I can open it in dreamweaver and everything.  but now I just need to understand the correct process of putting my wordpress blog onto my site. I know how to edit and post new posts in wor

  • Adobe premiere CC trial expired at first install !

    My premiere CC software tells me trial has expired and don't work anymore but i just started installing it yet ! What's the problem ? I'm installing it with a new adobe CC email.

  • IPhone4 ios7 turns off/shuts down whenever I sleep or lock it

    We'll I don't really know if it is off or not but ever since I upgraded my iphone4 to ios7, if I sleep it or if it auto-locks itself, I need to do a full power on (by holding down the home button and sleep/wake button together for 10+ seconds until I

  • Seeking Advice on Adobe Training Partners

    I had this posted somewhere else, but was told this would be a better place for it...... I'm fairly new to using the Technical Communications Suite and am considering taking some classes for FrameMaker 8 and RoboHelp 7. The companies that I'm conside