Unable to burn DVDs on iMac. Folders dragged to DVD window appear as documents. DVDs from same package burned OK last year. Using Lion. CDs burn OK.

Unable to burn DVDs on 2009 iMac ( Lion ). Folders and any files dragged to DVD window appear as blank documents.
Burned DVDs from same package ( Memorex ) last year OK. CDs burn OK. DVDs are several years old, if that matters.

The music is a tune that was purchased/downloaded from the iTune store. The slide shows (five of them) consist of digital photos (jpg) that I have taken. The interesting thing is that I also have an eMac (about three years old) that I have created the same iDVD project (identical music & identical slide shows). I have been able to burn a DVD disk of this project on my eMac WITHOUT A PROBLEM. The thing I do not like about the eMac is that I purchased family pack of iLife 6 last year (because I liked some of the new Themes). However, when I installed it on my eMac, for some reason it takes about 5-10 minutes to get iDVD 6 "up and running." Once it has loaded the Themes, however, I am "good to go." I've had this computer into the "Genius Bar" at the local area Apple Store TWICE and they are unable to get it to work more efficiently. The even reinstalled the entire operating system to no avail. So, the solution is to launch iDVD 6 on my eMac and then go do something else for 5-10 minutes. But at least I am able to burn my iDVD projects to DVDs.
With my iMac, iDVD launches quickly but is useless since I am unable to burn my iDVD slide show projects to DVD.
So, as a result, I am pretty much ready to "call it a day" with the iMac and will go back to my eMac.
Thanks for your time.
SCC Jeff

Similar Messages

  • With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
    I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
    You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
    Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

  • Can I use regeion 1 DVD's on my mac purchased last year 27inch desk top?

    can I use region 1 DVD's on my mac purchased last year 27inch desk top?

    The region is probably unset with five available changes. Click here for more information.
    (100796)

  • I have two questions.  How do I burn a DVD from a slideshow created in IPhoto without using IDVD which is no longer available?!!  And is there any way to control the automatic zooming in my slideshow?

    I know IMac messed up by no longer offering IDVD OR ILIFE on their new computers. Yes I too am mad I spent the money.  But does anyone have a solution  on how to work with the limited programs I did get?  Or what programs do you suggest I purchase to be able to do something as simple as burn a slidewshow on a DVD!!!!  I already purchases Xilisoft DVD which does not allow for photos only videos.  I want to use both!  I have had my new mac less than a year.  Can I still return it?

    If you contact Apple at
    U.S. iPod, Mac and iPad technical support:
    (800) APL-CARE (800-275-2273)
    You should be able to get a copy of the original DVDs for  a nominal charge.

  • Unable to create dvd from Iphoto slideshow?

    I am unable to create a dvd slideshow from Iphoto.  Any suggestions?

    Yes. Here's some suggestions for getting help:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • Unable to eject DVD from drive - tried all troubleshooting suggestions

    Tried ejecting DVD using eject button on keyboard, using disk utilities, restarting computer and holding down mouse. Nothing seems to work. Any other suggestions for getting a DVD out that was inserted backwards and is not being read by drive?
    Thanks!

    Did you solve this problem? I seem to be in the same perdicament. My DVD-drive has vanished completely from the OS after I inserted a seemingly harmless dvd. And now none of the usual tips work.
    -Bluesbro-

  • How do I create a DVD from iMovie with menus? What iDVD use to do!

    iDVD has disappeared on my new MacBook Pro, so how do I create a DVD with menus and everything?

    Hi
    You can not do that - without any DVD authoring software as iDVD.
    So either
    • Treat to return Your new Mac (within 14 days) if Apple doesn't give You iDVD
    • Buy a second handed iLife'09 (pref as You then get all Themes - not so in iLife'11 - AND - after program-up-date they will be the same version anyway)
    • Buy another DVD-authoring software as Roxio Toast™ (costs a bit - contanin lot's of other things too - that was of great value to me (not so to everyone)
    • Use the free (and very simple/basic) BURN™ - as You at least can get Your Movie onto a Playable DVD
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • Unable to burn with Disc Utility

    I have a mac mini superdrive and I want to burn some idvd projects on DVDs that we made with students last year. I started burning one and it went fine until the end. Now I am trying to burn another project that is much bigger than the first one. It works fine until almost the end and then I get the error:"Unable to burn...The device failed to respond properly unable to recover or retry".
    I am using the same blank dvds as for the first project and last year I did burn this project on the same computer. What can I do?
    Thank you for your help.

    *A few suggestions:*
    Repairing permissions & then restarting your computer usually cures "burning" hiccups. Should be done after each burning session.
    Another help source (if you haven't already done so).
    Go to your OS Help Menu. In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to your issue.
    You can also do the same in Disk Utility. Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim Strongly recommended by users.
    DVDs
    Maxell
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
    Check out the following KB Articles: http://support.apple.com/kb/TS2288 Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
    http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive

  • Burning a DVD from Final Cut Pro X via Compressor - No audio?

    I have attempted to burn a DVD from a Final Cut Pro X project using Compressor, however the result was silent. 
    I used compressor because my FCPx project is in NTSC and my DVD is for air on Australian TV (PAL).
    Image seemed to burn OK however there is no audio.  Can anyone advise what I may have overlooked?
    This is the first time I have used Compressor, and I am fairly new to FCP X.
    thanks,
    Geoff

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

  • Burning a DVD from Final Cut Express HD

    I previously asked for help using iDVD and was directed to a site but I can't get it to open on my computer; it just loads forever. (The site is www.apple.com/ilife/tutorials/) Isn't there any way to burn a DVD straight from FCE HD? If not, can someone suggest a different tutorial site I can try?
    Many thanks
    Russ Haynes

    Excuse me for jumping in...but as a newbie to FCE, am I to assume that one cannot render directly to DVD from FCE?
    So then what is used, and where are chapters created and such?
    I used to use Pinnalce Studio and everything was done from inside the program.

  • Having extreme problems using the new iMac, adobe CS5 (in particular InDesign) and OSX 10.8.2 (and now also 10.8.3) Mountain Lion

    Is anyone else experiencing the same thing? My computer is 2 months old and has hardly any files stored on it. Also, my
    Graphics  NVIDIA GeForce GT 650M 512 MB and my memory is 16 GB 1600 MHz DDR3.
    I am only running one thing on the computer as we speak - making a small pattern in InDesign - yet is has been frozen for over 20 mins, and that's not the first time this has happened.
    I updated to the latest Mountain lion this morning (10.8.3) and its exactly the same.
    I dont understand why this is happening, but on the older iMac i could run several windows of the entire creative suite without a problem - i was also using Snow Leopard.
    please help!

    noellia wrote:
    Is anyone else experiencing the same thing? My computer is 2 months old and has hardly any files stored on it. Also, my
    Graphics  NVIDIA GeForce GT 650M 512 MB and my memory is 16 GB 1600 MHz DDR3.
    I am only running one thing on the computer as we speak - making a small pattern in InDesign - yet is has been frozen for over 20 mins, and that's not the first time this has happened.
    I updated to the latest Mountain lion this morning (10.8.3) and its exactly the same.
    I dont understand why this is happening, but on the older iMac i could run several windows of the entire creative suite without a problem - i was also using Snow Leopard.
    please help!
    Do you have any Security/Anti-Virus software installed? Mackeeper? Any Third Party programs you have installed recently?
    Pete

  • Can I stream a DVD from my MacBook Pro to Apple TV?

    When I try to stream a DVD from my MacBook Pro to my tv using Apple TV the video won't play and I just see a chequered pattern in DVD player on the TV screen.  How can I stream a DVD to my TV?

    It's an application for playing video.
    http://download.cnet.com/VLC-Media-Player/3000-2139_4-10210434.html

  • I bought my first  iMac 27" i5 in November 2011 last year. Do you think there would be a update that will Features a Retina Display, Siri etc ?? So my iMac will be the same as the new one that will be released this year, Or will I have to buy a new iMac t

    I bought my first  iMac 27" i5 in November 2011 last year.
    Do you think there would be a update that will Features a Retina Display, Siri etc ??
    So my iMac will be the same as the new one that will be released this year,
    Or will I have to buy a new iMac to get all these new updates ??
    It would be a shame if I did because my iMac is only 6months old if that ..
    Kind regards Simon Trott Apple user and proud of it

    We're not allowed to speculate on future or rumoured Apple products, but we all know there'll always be newer tech coming along.
    The iMac you have is an excellent machine, be happy with it and get a good few years use out of it. By the time your machine is slowing down, whatever comes next will have been updated numerous times.
    I had the 2011 i5 27" delivered about 3 weeks ago. It's a cracking machine

  • Hello am i going to lose my folders if i installed windows 7 on my mac by bootcamp ???

    Hello am i going to lose my folders if i installed windows 7 on my mac by bootcamp ???

    Most commonly used backup methods
    Windows in BootCamp or Virtual Machine?

  • Unable to burn DVD with iMovie?

    Am fairly dissapointed with Apple.
    I have spent time today creating a short movie of photos of my 2 month old son.
    When trying to share with iDVD I have realised that my iLife 11 doesn't come with this software and I can't download it!
    I am therefore unable to burn my project to disc and feel I have wasted my time.
    In my opinion this seriously reduces the usablility of iMovie.
    Is there anyway I can burn the DVD without spending a shed load of cash on some third party software??
    Thanks

    I was also disappointed when I bought my Mac and it came without iWeb and iDVD.
    For burning DVDs, I use a free app called Burn http://burn-osx.sourceforge.net/Pages/English/home.html.
    You can't do fancy menus or anything that iDVD can, but at least you can get your iMovie Projects onto a DVD.
    You have to export your project from iMovie and then drag the .m4v or .mov file that comes out onto Burn (Make sure the Video tab at the top is selected.
    Of course, if you have a MacBook Air, you'll need an external optical drive capable of burning DVDs.

Maybe you are looking for

  • Can i make my photoshop 4 work on a new computer with windows 7 ?

    how can i make my photoshop 4 work on a new computer with windows 7 ?

  • Formula Column in Report template

    I have a report template to use in all the report. I want to have a formula column on it to take a control value(location/Organization) where the report is being printing. Is it possible to have a formula column in a report template? if it possible h

  • Photo gallery subscribe -anybody?

    i have uploaded my site on a non .mac account. works fine. i have some baby picts in a gallery i want to have family subscibe too. when you hit the subscribe button, 1. open iphoto 2. shows how may pict are on the online gallery 3. displays dotted bo

  • Jstl programme

    hello, plaese try to solve my problem to display the value from formbean in jsp in strut's example by using JSTL we write like this.. <td><c:out value="${bean.student}"/> </td> <td><c:out value="${bean.subject}"/></td> <td><c:out value="${bean.phone}

  • So, what exactly is a "Link Title"?

    It seems we have a new option when inserting links. What does it actiually do? LabVIEW Champion . Do more with less code and in less time . Solved! Go to Solution. Attachments: LinkTitle.png ‏18 KB