Unable to call from my skype out account

Hi!
Iam unable to call from my skype out account to india, but i can able to call skype to skype users.pls advice.otherwise pls advice how to cancel the membership and get my money back.
Regards
Rajan

Contact your carrier.

Similar Messages

Recieving illegal soliciting calls from a skype

I am receiving illegal soliciting calls from a skype phone #. xxx xxx xxxx I called the # back to confirm it was in fact a real # and not one falsified for caller ID. With some research I found that the number was being supplied by Level 3 Communications which I contacted (Call Recorded). They informed me that Skype is using that phone # through them. There needs to be a way to contact Skype for these issues. If not it would seem that Skype is catering to these companies and taking an active part in their illegal operations by profiting from providing the service.

TSRace wrote:
There needs to be a way to contact Skype for these issues.
Hello,
Please report this to [email protected] You can stop unsolicited calls by going to > Tools > Options > Privacy > Only allow calls from people on my Contact List.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can't make any calls from my Skype account to land...

I have had this problem for 2 years. I cannot call a phone from my Skype account. I have credit on my account and even topped up again today but still I can't make calls. The screen comes up as if it is about to make a call but it just says contacting and nothing happens.....i have tried using several devices but same result....highly frustrating and Skype support is very poor!!!!can anyone help me ?

Richardmadden. wrote:
I have had this problem for 2 years. I cannot call a phone from my Skype account. I have credit on my account and even topped up again today but still I can't make calls.
Hello and welcome to the Skype Community!
The reason you can't make calls is because you are calling from the UAE which blocks all outbound VoIP traffic including Skype to protect the state monopoly. Accessing the internet using a VPN to avoid the block may assist.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Unable to call from my office desk

Hi Team,
I have got India Unlimited Subscription. I have registered 4 numbers out of 5 and on of its my office desk phone.
Am unable to use/dial the "skype to go numbers" from that Cisco (Office desk) phone.
Pls advice in this regard

Contact your carrier.

Activate Windows 8 Enterprise over the phone (The option to choose what country you are calling from is greyed out)

I am trying to activate Windows 8 Enterprise. However, the workstation I'm running it on is not able to connect to the Internet. So, I select "Activate over the phone". However, the "Click nearest location" is greyed out.
The default is set to Afghanistan, which unhelpfully lists a toll number to call in Afghanistan...which would work if I lived in Afghanistan, but I don't. Other than pluggint the system into the Internet is there a way to activate my copy of Windows
8 Enterprise over the phone? I need a toll free US number.

I appreciated the tip. However, it is not the answer to my post. I only need a toll free US phone number to complete over the phone activation. Like I said in my original post, the drop-down selection box is greyed out and only shows a
number for users in Afghanistan.
If phone activation for the evaluation version of Windows 8 Enterprise is unavailable, then THAT should be the answer.
Here you go...
1-888-725-1047
Regards,
prathaprabhu

Someone called my cell from my skype number

At 6 am today, I received a call from my Skype number on my cell phone. My Skype number showed under caller ID. I did not make the call as I was sleeping and was very surprised to see my Skype number on the caller ID. The only way I can figure this could happen is someone has my Skype Login and they know it belongs to me since they also had my cell phone to call. I didn't answer the phone at 6 and probably should have.
Does anyone have any idea how someone made this call? Has my account been hacked?

Just checked my skype account and it appears it was a forwarded call. I'm assuming someone/something called my skype-in number.
If I look at my usage, and then select "Show" "Call forwarded" I see a call yesterday referenced as "This call was forwarded from unknown"
Still strange that on my cell it shows up as my skype alias.

Transfer call from federated failed

Hi
I am testing transfer call from federated client , I am transferring it to another lync user or to PSTN and both giving transfer not complete with error
can not complete transfer error ID 404 , source ID 239
the nice thing that I am not seeing any error with red flag in the S4 & SIP Stack event of the lync edge and FE , and when I search for the contact of the transferred user I can't find his name too in logs !
any suggestion will be helpful
by the way the internal transfer for incoming/outgoing working fine , I tried to disable/enable refer but same result , anyway I think the transfer to internal LYNC client doesn't need refer changes as it is for gateway only
I am testing the call from my Skype account
Thanks

I would fix OCSLogger on your edge server and post that log:
Issues with OCSLogger and the Outbound routing messages in Snooper on Lync 2013.
Try the following:
Close Snooper and OCSLogger
Rename the default.tmx file in C:\Program Files\Microsoft Lync Server 2013\Debugging Tools directory to default.tmx.old
Copy the default.tmx file from c:\Program Files\Common Files\Microsoft Lync Server 2013\Tracing To C:\Program Files\Microsoft Lync Server 2013 Debugging Tools.
Start OCSLogger again and run your scenario.

Synchronous SOAP call from XI without BPM....

Hi All,
Is it possible to use the (File - XI - SOAP) Synchronous SOAP call from XI with out BPM. to trace the error messages. If yes then how it can be achived in XI.
Thanks,
Jane

Hi,
You will get either a system error/application error raised if there is a problem processing the SOAP request without the need for BPM.
You can then raise an alert from the RWB if this occurs.
If all is OK with processing, you will get the standard chequered flag.
Cheers
Colin.

Unable to call in to my Skype number from landline.

Purchased new Skype number today. It won't receive calls from a landline phone. From a mobile it appears "busy".

Hi, Grremlin, and welcome to the Community, Please check your Skype software preference settings as explained here, and test again: https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number? If you still can not receive calls to your Skype Number, the next step is to please contact Skype Customer Service to request your number be checked and tested. Regards,Elaine

How to know Skype number is it used to call from?

Hello,
When someone calls my mobile phone from Skype, a random mobile phone appears as the caller ID. When he calls my house phone from a Skype, a random local phone number appears as the caller ID.
What is the logics of that? Is it possible to determine if some phone number belongs to Skype?
Thanks in advanced,
Jaime

Hi, Juanvizoso, and welcome to the Community,
Good point! I just checked one of my contacts from whom I receive frequent calls, and who also has multiple numbers in their profile, and noted the same thing.
When someone calls your Skype Number, you would indeed not be able to determine if they are calling you via the Skype account, or via the Skype Number. This is by design and is normal, because the Skype Number simply provides a fixed (or, "land") line number for people to reach you, and you answer on Skype.
The only work-around would be to separate out all of the numbers.
Kind regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Can I make calls from my mobile using Skype?

Sorry if I'm being dim, but I can't figure out how to make a call from my mobile with my new Skype account.
Can I do it? If so, how?
Do I need a special 'phone or will any mobile do?
Many thanks
Kate

Hello Kate,
To make calls from your cellphone please see here:
http://www.skype.com/intl/en-us/features/allfeatures/skype-to-go-number/
Moved to "STG".
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Incoming calls from telephones to my skype number drop after 3-5 seconds

Incoming calls from telephones to my skype number drop after 3-5 seconds
I spent a while trying to seriously diagnose this problem with Skype support a year ago, but didn't get anywhere; I came to the conclusion that there was something wrong with the network at my end. But it's irritating me again now, so I thought I'd check whether anyone else gets this problem. It's incoming calls only, to the skype number only. I can recieve incoming calls from Skype fine, I can make outgoing calls to Skype and to telephone numbers fine, the problem affects both Skype on my Android Mobile (when it's connected to my home WiFi) and Skype on my Windows Desktop - so, not a software configuration thing.
When making a test call from my mobile to my Skype In number, it drops at the Skype end several seconds before the mobile notices the line is dead; definitely dropping out at the Skype level, and not the telephone network level.

Hi, ScottMaggie, and welcome to the Community,
I have referred your report to those to whom I report; I am not affiliated with Skype Customer Service.
What you so well describe here, a number transfer (highlighted by me in orange type) is not something Skype has the facility to do:
None would agree to moderate between myself and the current number holder to do a transfer. If that person simply gives up the number it would be a 90 day wait with no way to guarantee I'd get the number back. They need to do a transfer as this is the only way to make it work. I have no way to contact them aside from calling the number and leaving voicemails.
In the system's simplicity, there is no flexibility.
Just out of curiosity ... and curiosity alone, have you checked the e-mail address on your account to double-check it is the correct registered e-mail address? I ask because I recently did a Skype Number renewal, and I received e-mail alerts every step of the way.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Snom phones in secondary subnet unable to call out - SIP CANCEL in SIP log

I've been trying to diagnose this very strange problem we are having. All our servers and some SNOM phones are in the subnet 192.168.100.0, the main building. They all work fine. Phones located in two other buildings connected with high-speed fiber use subnets
192.168.1.0 and 192.168.200.0. They can receive calls but are unable to call out. This doesn't affect the Lync 2010 and 2013 desktop clients with enterprise voice...they work fine anywhere, even externally.
We are running Lync Server 2013 Standard Edition, with the latest updates applied. Mediation role is co-located. Edge server is setup and I think I have configured everything correctly. I have two network adapters, one external facing and one internal facing.
External facing one has dns settings and gateway, internal facing has neither. I have setup persistent routes that enable the edge server to ping hosts in 1.0 and 200.0 no problem. DNS is setup internally so anyone anywhere can ping the edge server (its dns
entry is routable lync2013edge.network.domain.ca). Phones used are the SNOM 720, I have the latest updates applied (8.8.3.27 UC)
On the actual SNOM phone, I will dial 7804636201. It will call and start ringing the other party. Almost exactly 10 seconds later I will hear a busy signal and then the phone displays "Media Connectivity Failure". I ran a log on SIP from the FE
Standard Edition server, here are some entries that I noticed that may have something to do with it (see bottom four paragraphs for SIP CANCEL)
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:42.240.0008db5d (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D806F0 ) Start Line: INVITE sip:7804636201;[email protected];user=phone SIP/2.0
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.269.0009106f (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F91
Direction: outgoing
Peer: lync2013.network.caedm.ca:5070
Message-Type: request
Start-Line: INVITE sip:[email protected]:5070;user=phone;maddr=lync2013.network.caedm.ca SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Contact: <sip:[email protected];opaque=user:epid:cO0WSS9wCFqUnP0dpEh6uQAA;gruu>;reg-id=1
Via: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Record-Route: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
Max-Forwards: 69
Content-Length: 3563
Content-Type: multipart/alternative;boundary="next_part_u00iwyrezkkuxf3d"
P-Asserted-Identity: "Joel Smith"<tel:+17808092404;ext=2404>
Message-Body: --next_part_u00iwyrezkkuxf3d
Content-Type: application/sdp
Content-Transfer-Encoding: 7bit
Content-Dis; handling=optional; ms-proxy-2007fallback
TL_INFO(TF_DIAG) [0]411C.2DE8::02/24/2015-17:23:42.270.000915ec (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(802))[3706963737] $$begin_record
Severity: information
Text: Routed a locally generated response
SIP-Start-Line: SIP/2.0 100 Trying
SIP-Call-ID: 3faa35f677ef48719b27c796251b0519
SIP-CSeq: 1 INVITE
Peer: 192.168.1.201:51470
Data: destination="[email protected]"
$$end_record
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:42.274.000928d4 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2F93
Direction: outgoing;source="local"
Peer: 192.168.1.201:51470
Message-Type: response
Start-Line: SIP/2.0 101 Progress Report
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 INVITE
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
Content-Length: 0
ms-diagnostics: 12006;reason="Trying next hop";source="LYNC2013.NETWORK.CAEDM.CA";PhoneUsage="Long Distance";PhoneRoute="LocalRoute";Gateway="208.68.17.53";appName="OutboundRouting"
$$end_record
TL_INFO(TF_PROTOCOL) [1]411C.2DE8::02/24/2015-17:23:42.488.000930bc (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[741182734] $$begin_record
Trace-Correlation-Id: 741182734
Instance-Id: 2F96
Direction: incoming
Peer: lync2013.network.caedm.ca:5070
Message-Type: response
Start-Line: SIP/2.0 183 Session Progress
FROM: "Joel Smith"<sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
TO: <sip:7804636201;[email protected];user=phone>;tag=d265bdc1c8;epid=0A24894D6D
CALL-ID: 3faa35f677ef48719b27c796251b0519
CSEQ: 1 INVITE
CONTACT: <sip:[email protected];gruu;opaque=srvr:MediationServer:0wzNMLUTNFKXO5KjW1mbdQAA>;isGateway
VIA: SIP/2.0/TLS 192.168.100.17:55489;branch=z9hG4bKE036484A.405BD23C943B158E;branched=TRUE,SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport;ms-received-port=51470;ms-received-cid=600
RECORD-ROUTE: <sip:Lync2013.network.caedm.ca:5061;transport=tls;opaque=state:T;lr>;tag=B39FB8145D545F357B2737F43833CEB4
CONTENT-LENGTH: 1388
CONTENT-TYPE: application/sdp
TL_VERBOSE(TF_NETWORK) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f6b (SIPStack,CRecvContext::CreateIncomingRequest:RecvContext.cpp(920))[3030787245]( 0000005F01E739D0 ) creating SIP_MID_CANCEL request
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00098f90 (SIPStack,CSIPMessage::ParseBufferChain:SIPMessage.cpp(694))( 0000005F03D7E2E0 ) Start Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
TL_VERBOSE(TF_PARSE) [0]411C.2DE8::02/24/2015-17:23:51.369.00099054 (SIPStack,CSIPMessage::ParseNextHeader:SIPMessage.cpp(1532))( 0000005F03D7E2E0 ) Found Header: Reason: SIP;cause=488;text="Media Connectivity Failure"
TL_INFO(TF_PROTOCOL) [0]411C.2DE8::02/24/2015-17:23:51.369.000990c6 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[3706963737] $$begin_record
Trace-Correlation-Id: 3706963737
Instance-Id: 2FA0
Direction: incoming
Peer: 192.168.1.201:51470
Message-Type: request
Start-Line: CANCEL sip:7804636201;[email protected];user=phone SIP/2.0
From: "Joel Smith" <sip:[email protected]>;tag=2ksjs48fxg;epid=000413774E0401
To: <sip:7804636201;[email protected];user=phone>
Call-ID: 3faa35f677ef48719b27c796251b0519
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 192.168.1.201:51470;branch=z9hG4bK-fdh7rhbbvsri;rport
Max-Forwards: 70
Content-Length: 0
$$end_record
I thought it might be a timeout issue, so I tried following these steps located here:
http://ipfone.hu/lync-mediation-server-cancel-problem/ After rebooting the server no changes were noticed.
I also checked out this website
http://blog.insidelync.com/2013/04/sip-trunking-101-with-lync-server-2013/ regarding disabling the check box "enable outbound routing failover timeout". Doing that had no effect.
Any other ideas would be appreciated.

Hi,
yes I see the config file is very simple and standard.
So the issue with snom on branch sites is random, it's correct?
From what I read in your answer, sometimes you can establish a correct communication between a snom and the called number +17804636201.
Have you tried to collect a network capture on a snom at branch location?
Do you have some other version of snom phone (300, 710, 821) to test?
Do you have some LPE ip-phone (Polycom CX600 o HP4110-4120) to test?
Regards
Luca
Luca Vitali | MCITP Lync/Exchange | snom Certified Engineer | Sonus SBC1000 Engineer

Unable to call the RFC from the WD java Program

Hi All,
I have a table and three buttons Create, Edit, Save in the layout.
If no record available in the R3 the the end user will click on create and then he will click on save so that the insert RFC will be called accordingly and the record will be inserted.My table is limited to 5 records only. If i enter all the 5 records and Click on submit the record is inserting in the backend , but if i enter less than 5 records im unable to call the RFC what might be the issue.
My insert RFC takes one Table node and 4 import parameters i'm passing all of the all the mentioned import parameters.
Code:-
View Controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPPView).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.math.BigDecimal;
import java.util.Date;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.Collection;
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPPView;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
import com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
//@@end
//@@begin documentation
//@@end
public class APPView
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APPView.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPPView for more details
private final IPrivateAPPView wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPPView.IContextNode for more details.
private final IPrivateAPPView.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APPView(IPrivateAPPView wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 try{
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 IWDClientUser user = WDClientUser.getLoggedInClientUser();
 String logUser= user.getSAPUser().getUniqueName();
 wdContext.currentContextElement().setUserid(logUser);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();//Returns the user id for the employee
 Collection nomineeList = new ArrayList();
 wdThis.wdGetAPPController(). executeZ_Hrfm_Nominee_Disp_Input( );
 int nomineeTableSize = wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().size();
 for(int i=0;i< nomineeTableSize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 ele.setAddr(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getAddr());
 ele.setDob(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getDob());
 ele.setGuard(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getGuard());
 ele.setName(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getName());
 ele.setPerc(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getPerc());
 ele.setRelat(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getRelat());
 nomineeList.add(ele);
 wdContext.nodeDisplay_table_node().bind(nomineeList);
 wdContext.currentContextElement().setEdit_val_attr(true);
 if(nomineeTableSize<=0){
 wdContext.currentContextElement().setCreateButtonEnable(true);
 wdContext.currentContextElement().setEditButtonEnable(false);
 else{
 wdContext.currentContextElement().setCreateButtonEnable(false);
 wdContext.currentContextElement().setEditButtonEnable(true);
 catch(Exception e){
 wdComponentAPI.getMessageManager().reportException("",true);
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
 provided by Web Dynpro. Provides access to the view controller's
 outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
 by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
 Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
 during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateAPPView wdThis, IPrivateAPPView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 //@@end
//@@begin javadoc:onActionGetData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionGetData(ServerEvent)
 //$$begin ActionButton(-535519310)
 //wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Disp_Input();
 //$$end
 //@@end
//@@begin javadoc:onActionEdit(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionEdit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionEdit(ServerEvent)
 //$$begin ActionButton(-535519310)
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 if(displayTablesize<5){
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="MOD";
 wdContext.currentContextElement().setTableReadOnly(true);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 //$$end
 //@@end
//@@begin javadoc:onActionCreate(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionCreate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreate(ServerEvent)
 int month=0,year=0,day=0;
 String month1,day1,year1;
 try{
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 wdContext.currentContextElement().setEdit_val_attr(false);
 if(wdContext.nodeDisplay_table_node().isEmpty()){
 if(displayTablesize<5){
 Calendar cal=Calendar.getInstance();
 month=cal.get(Calendar.MONTH)+1;
 if(month==1||month==2||month==3||month==4||month==5||month==6||month==7||month==8||month==9){
 month1="0"+month;
 else{
 month1=""+month;
 day = cal.get(Calendar.DAY_OF_MONTH);
 if(day==1||day==2||day==3||day==4||day==5||day==6||day==7||day==8||day==9){
 day1= "0"+day;
 else{
 day1=""+day;
 year = cal.get(Calendar.YEAR);
 year1=""+year;
 String strFormat=day1"."month1"."year1;
 wdContext.currentOutput_NomineeElement().setBegda(strFormat);
 wdContext.currentOutput_NomineeElement().setEndda("31.12.9999");
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="INS";
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdContext.currentContextElement().setTableReadOnly(true);
 catch(NullPointerException npe){
 wdComponentAPI.getMessageManager().reportException("No Data Available",true);
 //@@end
//@@begin javadoc:onActionSaveData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionSaveData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSaveData(ServerEvent)
 float percentage=0;
 float dupePercentage=0;
 boolean isTest = false;
 Collection DispTList = new ArrayList();
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 try{
 displayTablesize = wdContext.nodeDisplay_table_node().size();
 //for(int i=1;i<=displayTablesize;i++){
 for(int i=0;i<displayTablesize;i++){
 BigDecimal share = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc();
 String name = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName();
 percentage = share.floatValue();
 dupePercentage = dupePercentage + percentage;
 if(name!=null && share!=null){
 Zst_Hr_Nominee nominee = new Zst_Hr_Nominee();
 nominee.setAddr(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 manager1.reportSuccess(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 nominee.setDob(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 nominee.setGuard(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 nominee.setName(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 nominee.setPerc(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 nominee.setRelat(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 DispTList.add(nominee);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 if((dupePercentage)!=100)
 wdComponentAPI.getMessageManager().reportException(
 "The sum of the share Percentages is not 100. Modify the percentages accordingly",true);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 String beginDate = wdContext.currentOutput_NomineeElement().getBegda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getBegda());
 String endDate=wdContext.currentOutput_NomineeElement().getEndda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getEndda());
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setBegda(beginDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setEndda(endDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdComponentAPI.getMessageManager().reportSuccess(operation);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();
 wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Ins_Mod_Input();
 //wdContext.currentContextElement().setTableReadOnly(false);
 catch(Exception e){
 e.getMessage();
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
int nomineeTableSize = 0;
int displayTablesize = 0;
String operation= null;
int size=5;
// float dupePercentage=0;
//String mod_op="MOD";
//@@end
content of obsolete user coding area(s) -
//@@begin obsolete:javadoc:onActionSave(ServerEvent)
// /** Declared validating even
Component controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPP).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPP;
import com.gmr.pck.Bapi_Employee_Getdata_Input;
import com.gmr.pck.Bapip0002B;
import com.gmr.pck.Z_Hrfm_Nominee_Disp_Input;
import com.gmr.pck.Z_Hrfm_Nominee_Ins_Mod_Input;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.lcr.api.util.SetProfileConnect;
import com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
//@@end
//@@begin documentation
//@@end
public class APP
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APP.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPP for more details
private final IPrivateAPP wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPP.IContextNode for more details.
private final IPrivateAPP.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APP(IPrivateAPP wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 //$$begin Service Controller(1490375209)
// wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(new Z_Hrfm_Nominee_Ins_Mod_Input());
 Z_Hrfm_Nominee_Ins_Mod_Input input = new Z_Hrfm_Nominee_Ins_Mod_Input();
 input.addNominee(new Zst_Hr_Nominee());
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(input);
 //$$end
 //$$begin Service Controller(-932523997)
 wdContext.nodeZ_Hrfm_Nominee_Disp_Input().bind(new Z_Hrfm_Nominee_Disp_Input());
 //$$end
 //$$begin Service Controller(-368783613)
 wdContext.nodeBapi_Employee_Getdata_Input().bind(new Bapi_Employee_Getdata_Input());
 //$$end
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoPostProcessing()
Hook called to handle data retrieval errors before rendering.
After doModifyView(), the Web Dynpro Framework gets all context data needed
for rendering by validating the contexts (which in turn calls the supply
functions and supplying relation roles). In this hook, the application
should handle the errors which occurred during validation of the contexts.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
Permitted operations:
- Flushing model queue
- Creating messages
- Reading context and model data
Forbidden operations:
- Invalidating model data
- Manipulating the context
- Firing outbound plugs
- Creating components
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoPostProcessing(boolean isCurrentRoot)
 //@@begin wdDoPostProcessing()
 //@@end
//@@begin javadoc:wdDoBeforeNavigation()
Hook before the navigation phase starts.
This hook allows you to flush the model queue and handle any
errors that occur. Firing outbound plugs is allowed in this hook.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoBeforeNavigation(boolean isCurrentRoot)
 //@@begin wdDoBeforeNavigation()
 //@@end
//@@begin javadoc:wdDoApplicationStateChange()
Hook that informs the application about a state change.

This hook is called e.g. to tell the application that will be
<ul>
<li>left via a suspend plug and therefore should go into a suspend/sleep
 mode with minimal need of resources. errors that occur. Firing
 outbound plugs is allowed in this hook.
<li>left due to a timeout and could write it's state to a data base if the
 user comes back later on
</ul>
The concrete reason is available via IWDApplicationStateChangeInfo

Important: This hook is called for the top level component only!
@param stateChangeInfo contains the information about the nature of the state change
@param stateChangeReturn allows the application to ask for a different state change.
 The framework is allowed to ignore it considering i.e. the current resources situation.
//@@end
public void wdDoApplicationStateChange(com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo stateChangeInfo, com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn stateChangeReturn)
 //@@begin wdDoApplicationStateChange()
 //@@end
//@@begin javadoc:executeBapi_Employee_Getdata_Input()
/** Declared method. */
//@@end
public void executeBapi_Employee_Getdata_Input( )
 //@@begin executeBapi_Employee_Getdata_Input()
 //$$begin Service Controller(1705750894)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 Iterator itrGetData = null;
 Bapip0002B out = null;
 try
 wdContext.currentBapi_Employee_Getdata_InputElement().modelObject().execute();
 wdContext.nodeOutput().invalidate();
 itrGetData = wdContext.currentOutputElement().modelObject().getPersonal_Data().iterator();
 while (itrGetData.hasNext()) {
 out = (Bapip0002B) itrGetData.next();
 empNo = out.getPerno();
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().setPernr(empNo);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setPernr(empNo);
// manager.reportSuccess(empNo);
 //wdThis.executeZ_Hrfm_Nominee_Disp_Input();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Disp_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Disp_Input( )
 //@@begin executeZ_Hrfm_Nominee_Disp_Input()
 //$$begin Service Controller(-366407911)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().modelObject().execute();
 wdContext.nodeOutput_Nominee().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Ins_Mod_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Ins_Mod_Input( )
 //@@begin executeZ_Hrfm_Nominee_Ins_Mod_Input()
 //$$begin Service Controller(1524028406)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().modelObject().execute();
 wdContext.nodeOutput_nominee_ins_mod().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String empNo = null;
//@@end
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 9:26 AM

Hi,
I have checked from RFC side that is working fine only java app its not working can you tell any thing needs to be changed from my application end.
Please check in Savedata action.
Regards,
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 11:01 AM

How can I remove "skype caller" from caller id

When I make calls from Skype I don't mind if it shows my phone number, but would prefer the customer I'm calling don't see that it's from a "skype caller" as this startles some customers I do business with. Can I have that wording removed and replace it with my name?

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on your iPhone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/en-gb/HT1918
If you don't get the 'none' option on the payment details screen : http://support.apple.com/en-gb/TS5366

Unable to call from my skype out account

Similar Messages

Maybe you are looking for