Unable to cancel copy process

I inserted a DVD into my laptop so that I would be able to transfer the music to my laptop. I dragged the file from the DVD to the desktop, and it began to transfer/copy the files. It then said one of the files was unable to be copied, and it almost froze. I have tried hitting the x to get it to cancel. But the box is still there saying Copying 185 items to "Desktop". It has not moved since I started it and told it to cancel. And it will not allow me to eject the disc since it says it is in use. I don't know how to fix this and eject the dvd. Help would be greatly appreciated.

Try this:
Click the Apple icon in the upper left corner.
Choose *Force Quit*.
Click Finder and then click the Relaunch button. Finder should close & reopen. You can check this by going to the dock and looking for the small blue circle underneath the Finder icon.
If the small blue circle does not appear, save your work in your applications, close the applications & restart the computer.
~Lyssa

Similar Messages

Unable to Cancel Failed Open Archive Process

Weeks ago, I installed AJA Macintosh QuickTime Codec v4.0 from the AJA website ( http://www.aja.com/products/software/ ), per their instructions. I was expecting to be able to import AJA QuickTime media files, particularly AJA Kona 10-bit RGB (R10k), and convert to ProRes upon import. The 10-bit RGB media files were provided by a film transfer service.
However, using Import File . . . always results in a message saying "No importable files. . . None of the selected files or folders can be imported. Change the selection and try again."
So I decided to try importing the AJA QuickTime media files using Import from Camera, Open Archives . . . This has resulted in Camera Import showing a spinning wheel non stop, for several hours now. I have been unable to cancel the process. When I quit and restart FCPX, a "Loading Compressor Support" message gets stuck on top of everything. Even restarting my computer doesn't stop it.
I don't have Compressor yet. For the time being, how do I stop Camera Import from ceaselessly trying to import?

I tried something else before trashing preferences, and it seems to have worked. With FCPX closed, I moved the folder with the media that Open Archives was pointing to into a different folder. Symptoms no longer occurred upon reopening FCPX.
Then, with FCPX closed, I moved the media back to where it was. Symptoms have not reoccurred upon opening FCPX.
Tom, thanks for the tip about using MPEG StreamClip going forward.

Unable to Cancel/Suspend few processes in NWA

Hi All,
I have few processes in which the Context Data is missing and I am unable to Cancel/Suspend such processes.
I have remove the task from users work list for which I am trying to Cancel this processes.Can anyone please let me know how to do the same . Thank you so much in advance .

usually u cannot do too much in the event of this kind of error
u may find a note if lucky.
if not, just open ticket to sap

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Unable to cancel busines completion

Hi Guus
Order is closed, Status is CLSD, Iam unable to cancel this status ,
When I go to function--> cancel the business completion system throws an error as
Technically complete not allowed.
I know its not possible , is thier any way to cancel this, either through user exit or some Tcode.
regards
Krish

Hi Pete
Error is
"Technically complete" is not allowed (ORD 600036803)
Message no. BS007
Diagnosis
The current status of object 'ORD 600036803' prohibits business transaction 'Technically complete'.
Procedure
To process business transaction 'Technically complete', you first have to change the status of object 'ORD 600036803' to allow the transaction 'Technically complete'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Transaction analysis
regards
Krish

I've updated my phone and I've made a backup. but now it says I must enter my code to restore all my files and I haven't got this code. If I cancel the process or choose something else, all my stuff will be deleted, and I really don't want that.

I've updated my phone and I've made a backup. but now it says I must enter my code to restore all my files and I haven't got this code. If I cancel the process or choose something else, all my stuff will be deleted, and I really don't want that.
HELP ME PLEASE!!!

If, for some reason, your backup got encrypted and you don't know the code, you'll have to set up your phone as new device and start all over again without the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
If you can't get pass the lock screen, connect in recovery mode and restore the phone, you'll have the option to reset the lock secreen passcode.
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

Mac OSX desktop dropping connection with multiple copy processes & large files

The servers are 6.5 SP3 running NFAP, the MAC OSX is 10.4.2 updated. The
volume the macs are using is part of a cluster. The users mount the volumes
on their macs and everying is for the most part fine. If they grab a bunch
of files and copy them from desktop to server it's fine as long as it's only
a single copy process. The users are part of the hi-res department and the
files can be 1GB or larger. If they drag one or more large files, and then
while that's copying they drag some more files, so both copy processes are
running at once....quite often the volume will dismount from the desktop and
you will get unable to copy because some resource is unavailable. Sometimes
the finder crashes, sometimes not. Often the files that were partially
copied get locked and the users needs to reboot their Mac in order to delete
them. I'm getting pretty desperate hear, anyone have an idea what's going
on. I don't know if this is a Tiger thing or a large file thing or a
multiple copy stream thing, a netware thing or a mac thing.....we have
hundreds of other users running OSX 10.3 and earlier who are not reporting
this problem, but they also don't copy files that size. Someone please tell
me they have seen this before....thanks very much. Oh, before going to 6.5
and NFAP the servers were 5.1 with Prosoft server and they never had the
problem.
Jake

Thanks for your help, I have incidents open now with Apple and Novell, I
hope one of them can provide something for us. We tried applying 6.5 SP4 to
a test server....the problem still happened but was "better", the copy
operations still quit but with SP4 applied the volume did not dismount....or
if it did it remounted automatically because it was still connected after
OKing through the copy errors.
"Jeffrey D Sessler" <[email protected]> wrote in message
news:[email protected]...
>I tried two 2GB files. No problems at all but I'm in a 100% end-to-end
>Gigabit environment. My server storage is also a very-fast SAN.
>
> Best,
> Jeff
>
>
> "Jacob Shorr" <[email protected]> wrote in message
> news:[email protected]...
>> Jeffrey,
>>
>> Have you tried the exact same test, dragging say two 500MB files in
>> seperate
>> copy operations? I hear what you're saying about the 10/100 link, but we
>> don't run gigabit to the desktops, and we're not going to anytime soon.
>> Even if that could resolve the issue we need something kind of other fix
>> for
>> our infrastructure. I will look into any errors on the switch.
>>
>> "Jeffrey D Sessler" <[email protected]> wrote in message
>> news:[email protected]...
>>> Well, considering that I'm not seeing the issue on my 10.4.2 machines
>>> against my 6.5Sp3 servers, I'm not sure what you should do at this
>>> point.
>>> Since you say that the 10.3 machines don't have an issue, it makes it
>> sound
>>> to me like this is an Apple issue.
>>>
>>> The logs point at a communication issue... Is there anyway to get that
>>> Mac
>>> on to a Gigabit connection to see if you can duplicate it?
>>>
>>> The other option is to wait for 10.4.3 to be released and see if the
>> problem
>>> goes away.
>>>
>>> Again, on only a 10/100 link, one copy of a large file _will_ saturate
>>> the
>>> link.Perhaps 10.4.2 has an issue with this?
>>>
>>> Also, when you're doing the copy, what to the error counters in the
>> switches
>>> say?
>>>
>>> Jeff
>>>
>>> "Jacob Shorr" <[email protected]> wrote in message
>>> news:[email protected]...
>>> > There are definately no mis-matches. This has been checked and
>> re-checked
>>> > a
>>> > dozen times. It's only on 10.4......we can replicate it on every 10.4
>>> > machine, and we cannot replicate it on any machine that is 10.3. What
>>> > should I do to go about getting this fixed, should I be contacting
>>> > Apple
>>> > or
>>> > Novell? The speed is always good until it actually decides to drop
>>> > and
>>> > cut
>>> > off.
>>> >
>>> >
>>> > "Jeffrey D Sessler" <[email protected]> wrote in message
>>> > news:7jj%[email protected]...
>>> >> Looks like communication between the Mac and the Netware server is
>>> > dropping.
>>> >> AFP in 10.3 and 10.4 support auto-reconnection but I'm sure that it
>> will
>>> >> fail the copy process.
>>> >>
>>> >> I'd first check to make sure that there are not any mis-matches on
>>> >> the
>>> >> switch e.g. the Mac is set to Auto (as it should be) but someone has
>> set
>>> > the
>>> >> switch to a forced mode. Both should be auto. A duplex miss-match
>>> >> could
>>> >> cause the Mac not to see the heart beat back from the Novell server.
>>> >>
>>> >> Like I said, if the workstation is only on 10/100, a single copy
>> process
>>> > on
>>> >> a G5 Mac will saturate that link. Adding more concurrent copies will
>> only
>>> >> result in everything slowing down and taking longer, or you'll get
>>> >> the
>>> >> dropped connections.
>>> >>
>>> >> Best,
>>> >> Jeff
>>> >>
>>> >>
>>> >> "Jacob Shorr" <[email protected]> wrote in message
>>> >> news:Ybc%[email protected]...
>>> >> > Take a look at the last entries in the system log right after it
>>> > happened,
>>> >> > let me know if it means anything to you. Thanks.
>>> >> >
>>> >> > Sep 29 13:26:10 yapostolides kernel[0]: AFP_VFS afpfs_mount:
>>> >> > /Volumes/FP04SYS11, pid 210
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>> doing
>>> >> > reconnect on /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > connect
>>> >> > to
>>> >> > the server /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > Opening
>>> >> > session /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > Logging
>>> >> > in
>>> >> > with uam 2 /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> >> > Restoring
>>> >> > session /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS
>>> >> > afpfs_MountAFPVolume:
>>> >> > GetVolParms failed 0x16
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> >> > afpfs_MountAFPVolume failed 22 /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > received
>>> >> > VQ_DEAD event (32)
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_Reconnect:
>>> > posting
>>> >> > to
>>> >> > KEA to unmount /Volumes/FP04SYS11
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > type
>>> >> > 'afpfs', mounted on '/Volumes/FP04SYS11', from
>>> >> > 'afp_0TQCV10QsPgy0TShVK000000-4340.2c000006', dead
>>> >> > Sep 29 13:31:13 yapostolides KernelEventAgent[43]: tid 00000000
>>> >> > found
>> 1
>>> >> > filesystem(s) with problem(s)
>>> >> > Sep 29 13:31:13 yapostolides kernel[0]: AFP_VFS afpfs_unmount:
>>> >> > /Volumes/FP04SYS11, flags 524288, pid 43
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> > "Jeffrey D Sessler" <[email protected]> wrote in message
>>> >> > news:GH%[email protected]...
>>> >> >> We move large files all the time under SP3 with no issues however,
>>> > there
>>> >> > are
>>> >> >> several finder/copy/afp issues in Tiger that are do to be fixed in
>>> >> >> 10.4.3.
>>> >> >>
>>> >> >> Also, if you have any type of network issue such as duplex
>> mis-matches
>>> > or
>>> >> >> are running say, only a 10/100 network, a single Mac can not only
>>> >> >> transfer
>>> >> >> more than 10MB/sec (filling the network pipe) or generate so many
>>> >> > collisions
>>> >> >> (duplex mis-match) that you could drop communication to the
>>> >> >> server.
>>> >> >>
>>> >> >> What type of server (speed, disks, raid level, NIC speed) and what
>>> >> >> type
>>> >> >> of
>>> >> >> network (switched gigabit, switched 10/100, shared 10/100, etc.)
>>> >> >>
>>> >> >> How long does it take to copy that single 1GB file to the server?
>>> >> >>
>>> >> >> Does a single copy process always work?
>>> >> >>
>>> >> >> Jeff
>>> >> >>
>>> >> >> "Jacob Shorr" <[email protected]> wrote in message
>>> >> >> news:[email protected]...
>>> >> >> > The servers are 6.5 SP3 running NFAP, the MAC OSX is 10.4.2
>> updated.
>>> >> > The
>>> >> >> > volume the macs are using is part of a cluster. The users mount
>> the
>>> >> >> > volumes
>>> >> >> > on their macs and everying is for the most part fine. If they
>> grab
>>> >> >> > a
>>> >> >> > bunch
>>> >> >> > of files and copy them from desktop to server it's fine as long
>>> >> >> > as
>>> > it's
>>> >> >> > only
>>> >> >> > a single copy process. The users are part of the hi-res
>> department
>>> > and
>>> >> >> > the
>>> >> >> > files can be 1GB or larger. If they drag one or more large
>>> >> >> > files,
>>> > and
>>> >> >> > then
>>> >> >> > while that's copying they drag some more files, so both copy
>>> > processes
>>> >> > are
>>> >> >> > running at once....quite often the volume will dismount from the
>>> >> >> > desktop
>>> >> >> > and
>>> >> >> > you will get unable to copy because some resource is
>>> >> >> > unavailable.
>>> >> >> > Sometimes
>>> >> >> > the finder crashes, sometimes not. Often the files that were
>>> > partially
>>> >> >> > copied get locked and the users needs to reboot their Mac in
>>> >> >> > order
>>> >> >> > to
>>> >> >> > delete
>>> >> >> > them. I'm getting pretty desperate hear, anyone have an idea
>> what's
>>> >> > going
>>> >> >> > on. I don't know if this is a Tiger thing or a large file thing
>> or
>>> >> >> > a
>>> >> >> > multiple copy stream thing, a netware thing or a mac
>>> >> >> > thing.....we
>>> > have
>>> >> >> > hundreds of other users running OSX 10.3 and earlier who are not
>>> >> > reporting
>>> >> >> > this problem, but they also don't copy files that size. Someone
>>> > please
>>> >> >> > tell
>>> >> >> > me they have seen this before....thanks very much. Oh, before
>> going
>>> > to
>>> >> >> > 6.5
>>> >> >> > and NFAP the servers were 5.1 with Prosoft server and they never
>> had
>>> >> >> > the
>>> >> >> > problem.
>>> >> >> >
>>> >> >> > Jake
>>> >> >> >
>>> >> >> >
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >
>>> >
>>>
>>>
>>
>>
>
>

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

HT5622 I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while i went to make a new ID with same Email but it says the Email is already in use! what should i do?

I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while I went to make a new ID with same Email but it says the Email is already in use! what should i do?

You will need to try changing the email address on the first account and see if you can then re-use it on a new account - you can try changing the email address via http://appleid.apple.com or by logging into it via the Store > View Account menu option on a computer's iTunes (if you don't have a spare email account then you can create one via http://gmail.com or http://hotmail.com)

Copying large file sets to external drives hangs copy process

Hi all,
Goal: to move large media file libraries for iTunes, iPhoto, and iMovie to external drives. Will move this drive as a media drive for a new iMac 2013. I am attempting to consolidate many old drives over the years and consolidate to newer and larger drives.
Hardware: moving from a Mac Pro 2010 to variety of USB and other drives for use with a 2013 iMac. The example below is from the boot drive of the Mac Pro. Today, the target drive was a 3 TB Seagate GoFlex ? USB 3 drive formatted as HFS+ Journaled. All drives are this format. I was using the Seagate drive on both the MacPro USB 2 and the iMac USB 3. I also use a NitroAV Firewire and USB hub to connect 3-4 USB and FW drives to the Mac Pro.
OS: Mac OS X 10.9.1 on Mac Pro 2010
Problem: Today--trying to copy large file sets such as iTunes, iPhoto libs, iMovie events from internal Mac drives to external drive(s) will hang the copy process (forever). This seems to mostly happen with very large batches of files: for example, an entire folder of iMovie events, the iTunes library; the iPhoto library. Symptom is that the process starts and then hangs at a variety of different points, never completing the copy. Requires a force quit of Finder and then a hard power reboot of the Mac. Recent examples today were (a) a hang at 3 Gb for a 72 Gb iTunes file; (b) hang at 13 Gb for same 72 Gb iTunes file; (c) hang at 61 Gb for a 290 Gb iPhoto file. In the past, I have had similar drive-copying issues from a variety of USB 2, USB 3 and FW drives (old and new) mostly on the Mac Pro 2010. The libraries and programs seem to run fine with no errors. Small folder copying is rarely an issue. Drives are not making weird noises. Drives were checked for permissions and repairs. Early trip to Genius Bar did not find any hardware issues on the internal drives.
I seem to get these "dropoff" of hard drives unmounting themselves and other drive-copy hangs more often than I should. These drives seem to be ok much of the time but they do drop off here and there.
Attempted solutions today: (1) Turned off all networking on Mac -- Ethernet and WiFi. This appeared to work and allowed the 72 Gb iTunes file to fully copy without an issue. However, on the next several attempts to copy the iPhoto and the hangs returned (at 16 and then 61 Gb) with no additional workarounds. (2) Restart changes the amount of copying per instance but still hangs. (3) Last line of a crash report said "Thunderbolt" but the Mac Pro had no Thunderbolt or Mini Display Port. I did format the Seagate drive on the new iMac that has Thunderbolt. ???
Related threads were slightly different. Any thoughts or solutions would be appreciated. Better copy software than Apple's Finder? I want the new Mac to be clean and thus did not do data migration. Should I do that only for the iPhoto library? I'm stumped.
It seems like more and more people will need to large media file sets to external drives as they load up more and more iPhone movies (my thing) and buy new Macs with smaller Flash storage. Why can't the copy process just "skip" the parts of the thing it can't copy and continue the process? Put an X on the photos/movies that didn't make it?
Thanks -- John

I'm having a similar problem. I'm using a MacBook Pro 2012 with a 500GB SSD as the main drive, 1TB internal drive (removed the optical drive), and also tried running from a Sandisk Ultra 64GB Micro SDXC card with the beta version of Mavericks.
I have a HUGE 1TB Final Cut Pro library that I need to get off my LaCie Thunderbolt drive and moved to a 3TB WD USB 3.0 drive. Every time I've tried to copy it the process would hang at some point, roughly 20% of the way through, then my MacBook would eventually restart on its own. No luck getting the file copied. Now I'm trying to create a disk image using disk utility to get the file from the Thunderbolt drive and saved to the 3TB WD drive. It's been running for half an hour so far and appears that it could take as long a 5 hours to complete.
Doing the copy via disk image was a shot in the dark and I'm not sure how well it will work if I need to actually use the files again. I'll post my results after I see what's happened.

BPM-Deadlineexception triggered after canceling the process

Hi,
   I have a BPM scenario thats like
WS <--> SAP.
this goes through BPM. I have exception in for Mapping Exception, send Exception and Deadline exception.
I am having a case where the mapping throws Mapping Exception. Now in the Mapping exception block i am throwing a alert and cancelling the process using control step.
Mapping exception works fine, but after couple of minutes the deadline excption is getting triggered and another alert being sent for deadline excpeiton.
Could someone help me with what is happening, as i dont want it to enter deadline exception because i have allready caught the exception and sent alert for mapping.
regards,
vinay.

Raj,
Here is the scenarios...
Receiver-> Block->End. In block i have defined mapping and send exception.
InBlock i have 1) Transformation throws Mapping Exception.
                     2) Send step throws Send Exception.
                     3) Mapping Exception handling where i have a control that cancels the process.
                     4) Send Exception handling where i have a control that cancels the process.
                     5) Deadline Exception where i have a control that cancels the process.
Once Mapping exception is triggered i am expecting the process to terminate. But even after mapping exception is triggered after 2 minutes(deadline time) deadline exception is being triggered. (shown in graphical workflow)
the reason i dont want deadline exception to be triggered is i will be defining alerts in all exception brancehs and dont want the user to be getting mapping and deadline exception both.
Raj, according to your suggestion if i throw an alert again in deadline branch, how would i decide whether its a genuine deadline exception or not( like mapping exception allready triggered). I would need to know when to send an deadline alert or not.
Regards,
Vinay.

ABAP +JAVA system copy process

Hello All,
We are in process of building a server from a existing ECC 6.0 ABAP + JAVA system.
We are using system copy process where we are restoring ABAP databse from source system.
My question is about the JAVA part.
How can we copy java part? Can we export only JAVA part from ECC 6.0 ABAP +JAVA system and import this to target server.
Please suugest the process.
Regards,
Manish

Hi Manoj,
When you are doing restore of your P(DUAL stack)system then it will automatically restores your ABAP and JAVA scehema table spaces(Normal usage).And If you are using sapinst then take a CI export(for file system/java settings etc) of your source system and then you have to import that in your target system later in the process.So this procedure will automatially serve for both ABAP and JAVA schemas. Importantly this procedue was highly recommended by SAP,so if you run into any issues then you can go ahead and raise a OSS msg.
Other guy already pasted the link for homogenious copy guides
But you can do your java export from command level also(with out using SAPINST) and later you can import it into your target system.This means you are exporting your JAVA schema table space and importing.Keep it in mind that you have to export your Target java scehema not source system .If you do so then its of no use because you have to perform all post steps for java stack also. You can export and import table j2ee table space from your OS level at DB host using "exp javascehma/pwd ........."(not a full fledged command) and then you do the same by perforing "imp........." after restore and recovery from your P(source) system.But this is not at all recommended by SAP but this will work!.
Let every one to know if you need anything more than this.

Cancelling the process

You can cancel the process by using deadline branch. No need of control step in the deadline branch. If your wants he can implement the control step to raise the exception or alert. Please correct me if I am wrong
thanks
kumar

To cancel the process...The only available step is "Control Step"......
      When you use the deadline branch,it only raises the exception....It means it just intimates that exception has occured...Now its your duty to handle that...the handler you use here is "Control Step"...
   If you don't raise any exception your BPM will be hanging out there with error and your system resources will be wasted....
   Let me explain you using simple template...
In Java...you use..
try{
     if(some codntion)
    Throw exception abc
catch
   if(exception abc)
      cancel the process
   So "block" step is like try block...time you specify in deadline branch is condition...if it satisfied you are throwing the exception abc (thats the timeout exception for us)and the code you write in the catch block is handler for that exception...thats nothing but control step in our case...
Hope this explains...
Regards,
Ravi

How to Cancel Succesful Processed Messages

Hi Experts,
How to cancel the succesful processed messages which reached Integration Server and sender Adapter engine in XI.
Thanks
Venkat Anil

We cannot cancel Successfully processed messages.
However you can configure Archiving and/ or deletion of successfully processed messages to remove the entry from the DB
Edited by: abhishek salvi on Jan 8, 2010 2:57 PM

Unable to alter the process. Unable to execute action start and stop

Hi,
I have setup a UCM CMS server on Linux. In the UCM instaance I setup If I go to Admin Server, the Genral configuration page contains no entry. While the file Config.cfg present in the directory Oracle/UCM/Server/Config/ contains all the entries I provided during the setup.
Now when I am trying to start/stop the UCM instance, it is giving me error " Request Failed : Unable to alter the process. Unable to execute action 'stop' on server 'EBIZ_UCM'." While If I try to restart the server using IdcServer present at the location Oracle/UCM/Server/bin/, it is getting started.
While clicking on the Component Manager, its giving error like :
" Unable to retrieve component data. Components.hda exists, but contains no data. ".
Please suggest.

I know this is an old thread, but I ran across this while having a similar problem. It turned out that I had started the admin server incorrectly (e.g. running /apps/oracle/ucm/server/admin/bin/IdcAdmin instead of /apps/oracle/ucm/server/admin/etc/idcadmin_start). Once I corrected that the problem went away.

Unable to cancel copy process

Similar Messages

Maybe you are looking for