Unable to cancel job

Well, I was never able to get Compressor 4 to work properly, so I bit the bullt, updated to Mavericks and Compresor 4.1 and I still have issues.  When I enabled instances and then submitted a job, all I got was "waiting" and it never encoded.  So I hit the x to cancel and now it just says "cancelling" but never completes this action.  When I disabled "instances", the program seems to work and encodes pretty quickly.  Anybody have any suggestions on how to get rid of this job?

Update: After installing Mavericks, it hosed my cluster in compressor 3.5.x.  Also, after my last post, 4.1 stopped working.  I ran compressor repair and it fixed the problem with 3.5.x and even though it says it's not compatible with 4.1, it seems to have fixed that too!  BTW- I did try the reset queue button but to no effect.  Don't all of you compressor users like being beta testers?  If I wanted garbge like this, I'd go back to a windows machine!

Similar Messages

  • Unable to Cancel Job in SM37 (R3)

    Dear Guys,
                    Regards.We got a situation :Unable to Kill the Background job (BI_REQ*).It shows "ACTIVE" and been running for more than 19,000 secs (2 days..) .When this job started ,the PROCESS ID was : 244277..But after a day,this PROCESS ID : 244277 has been allocated to some other R3 Program(Monitored in SM50).But the Background Job is  still "ACTIVE".Tried killing the Job in SM37--->Cancel Active Job or Delete the Job) but ,when tried to "Cancel" the Job,we get a message : The job is NOT ACTIVE !!!. Then when tried to "DELETE" the job ,we get a message " Job is still ACTIVE"......!!!!
    >Since  there is no Work Process in SM50,what is the alternative solution  to Kill this Job..........???
    (In BW ,there is no Update of data records,with the monitor showing RED)....
    Guys,would appreciate your time and help on this................
    Manythanks
    Arun

    Hi.......
    Go to SM37 >> select the job >> Click on the JOB  tab in the top >> Click on Check status............
    Then it status will show cancel...........
    Actually sometimes it happens job gets cancelled but staus shows active....then we need to do this..........actually job is already cancelled......
    Hope this helps you.......
    Regards,
    Debjani.....

  • Unable to cancel job in que.

    I have a job in que in my HP1610x all in one printer and   can't cancel it. Status; says deleting but nothing is happening. Nothing else will print. How can I get rid of the job in que? any help will be greatly appreciated. The printer is connected to a HP Pavilion dv7 laptop with windows 7 64bit processor. Thank you in advance.

    Hi,
    From the Control Panel, open Administrative Tools and select Sevices.  Browse down to the print spooler service, right click it and select Properties then click on the Stop button.  Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
    Restart the computer and you should find the document has been removed.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Report for cancelled jobs

    Hi ,
    I have a requirement in which I have to create a report that should pickup all the cancelled CRM marketing jobs (due to whatever reason) based on on job name, copy them and restart them.
    In your selection screen, you will give the cancelled job name (wildcard acceptable..like ZE00*) and a radio button to show the cancelled job list and copy the jobs.
    Could anyone guide me on how to go ahead with this report?
    Regards,
    Mohit

    Hi,
    in table TBTCO and TBTCP you have all jobs with current status. You can search them by name.
    Selected jobs you can "popup_with_table" FM. Then you need to use fm to submit job in ackground;
    'JOB_OPEN', 'JOB_SUBMIT' and 'JOB_CLOSE'.
    Good luck !

  • Problem with CUPS and Canceling jobs

    I am using OS 10.3.9 on a 1.42 MDD PowerMac
    I am having a problem trying to cancel Jobs using the CUPS interface. When I select "Cancel" I get an error "client-error-forbidden".
    I have tried logging in as Root but the same error occurs.
    I have run "CacheOut" and deleted all cache thinking that it would solve my problem.
    I can't seem to find any answers anywhere.
    I have 1 fax job and 1 print job that I would like to remove from the Que.
    If I knew where these files were I would manually delete them, but I cannot find them, except in the CUPS interface
    I was thinking of installing CUPS 1.2b2, as it has more features and maybe it would solve my problem.
    Are there any problems that I should know about before installing this software. If I install it I can't go back to my original CUPS without re-installing the system.
    Thanks,
    Nick
    G4 1.42 MDD   Mac OS X (10.3.9)   2 GB memory

    Nicholas,
    I assume you're talking about accessing your printer from your browser by using the URL http://127.0.0.1:631/printers/
    Understand you can't log in as Admin?
    Do you have an appication named after your printer in the folder Home/Library/Printers ? If so, click on it and see if you can see your job.
    If not, try downloading Printer Setup Repair from:
    http://www.fixamacsoftware.com/software/index.html
    Seems to do a great job in fixing problems, and might restore your ability to monitor your print jobs. I was only able to monitor and delete my print jobs through the CUPS interface on my browser until I ran Printer Setup Repair. After that, I was able to use the application mentioned in my first paragraph to do the monitoring (and it works great!)
    Hope this helps!
    Bob

  • Cancelled jobs

    Hi All
         I have to create a program which gets the background jobs cancelled for a particular period.If we have any cancelled jobs then send a SMS.I have the funtionality to send an SMS will you please tell me how to get the background jobs cancelled for a particular period.
    Thank You.
    Regards
    Giri

    SELECT jobname
             reluname
             strtdate
             strttime
             FROM tbtco
             INTO TABLE t_jobs
             WHERE status EQ 'A'  and
            strtdate GT <value> and
            strttime GT <value.
    reward if answered

  • How to Fetch Cancelled Jobs info along with the Short Dump Text

    Hi Gurus,
    I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
    I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
    Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
    Thanks in Advance.
    Best Regards,
    Sumalatha

    The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
    The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
    To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
    best wishes
    Ed
    PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

  • Error in automatically starting canceled job in a zreport

    Hi All
    I developed a zreport in which the input is canceled status taken from SM37.
    When the zreport will execute the canceled job automatically restart and completed.
    But it is not happening in Zreport. I am using SAP 4.7.
                                                  Kindly advice how to proceed.
    Thanks
    Raj

    A service specific error occurred: 2.fix OS/networking configuration error
    when was last time EM worked without error?
    what changed since then?

  • Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

    HI all,
    I ran into a problem with one of the servers in my DAG.  Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server.  The DAG continued to function on the other server.  So this particular
    DB01 had only some test accounts in it so I removed the database copy.  Unfortunately the removal must not have completed correctly. 
    After recovering the needed space in the partition, I tried to recopy the database and it failed.  So I deleted the entire database from the active server and it successfully removed it from the active server.  Now on both the servers the database
    is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists.  I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
    of the database (failed redundancy) but there should be zero copies.
    This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists. 
    Can you point me to the location to clean this up?
    Log Name:      Application
    Source:        MSExchange Mailbox Replication
    Date:          02/25/2011 2:00:07 PM
    Event ID:      1006
    Task Category: Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      email1.domain.com
    Description:
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: DB01
    Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB    
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Mailbox Replication" />
        <EventID Qualifiers="32772">1006</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
        <EventRecordID>181576</EventRecordID>
        <Channel>Application</Channel>
        <Computer>email1.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB01</Data>
        <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB     </Data>
      </EventData>
    </Event>

    Hi
    This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases. 
    Restarting the service will clear the cache.
    Maybe it is the simplest way to solve it.
    If it doesn’t work, you can try cmd to check it.
    Get-MailboxDatabase : Can you find the database which you delete?
    Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

  • Unable to cancel LIV or perform Credit memo/Subsequent Credit

    Hi,
    I have a PO (with commitment from year 2008) that was created in 2008 and LIV in 2009.
    But was unable to cancel LIV or perform credit memo/subsequent credit in 2009, error message indicating that budget exceed year 2008 appear.
    Is there any way i can proceed to cancel this LIV or do a credit memo?
    I have tried to carry the commitment back from 2009 to 2008, still cannot.
    Appreciate if any expert can advise, thanks!

    Hi
    If you deactivate availability control then you can spend as much as you want on purchasing. The released budget and budget have no control on spend amount. When you activate the availability control (yearwise) by that time there should be released budget equal to that of spent amount.
    Generally for some projects (specific to particular coding mask) we remove availabity control and for general projects we put it.
    Thanks

  • Unable to Cancel/Suspend few processes in NWA

    Hi All,
    I have few processes in which the Context Data is missing and I am unable to Cancel/Suspend such processes.
    I have remove the task from users work list for which I am trying to Cancel this processes.Can anyone please let me know how to do the same . Thank you so much in advance .

    usually u cannot do too much in the event of this kind of error
    u may find a note if lucky.
    if not, just open ticket to sap

  • Unable to cancel busines completion

    Hi Guus
       Order is closed, Status is CLSD, Iam unable to cancel this status ,
    When I go to function--> cancel the business completion system throws an error as
    Technically complete not allowed.
    I know its not possible , is thier any way to cancel this, either through user exit or some Tcode.
    regards
    Krish

    Hi Pete
    Error is
    "Technically complete" is not allowed (ORD 600036803)
    Message no. BS007
    Diagnosis
    The current status of object 'ORD 600036803' prohibits business transaction 'Technically complete'.
    Procedure
    To process business transaction 'Technically complete', you first have to change the status of object 'ORD 600036803' to allow the transaction 'Technically complete'.
    This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
    Transaction analysis
    regards
    Krish

  • Unable to Cancel Skype Premium Subscrption

    Hi, I am unable to cancel Skype Premium subscription. When I go to Group Video->Change Subscription Settings-> It returns page cannot be displayed page. I tried it 3 different systems, but same message. Please help. Regards.

    Hi,
    Due to technical difficulties some users are not able to cancel Skype Premium, in such cases please contact customer service and they will help you resolve it: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Unable to Cancel Premium Subscription (Group video...

    I'm Unable to Cancel my Skype Premium Subscription (Group video calling), I was automatically billed via PayPal second time and want to stop it to do it next month. Unfortunately the link Change Skype Premium settings goes to a blank page! I tried it several times for the last some days. How to unsubscribe?
    Thank you,
    RR

    Please contact Skype Customer Service, they will help you cancel it and refund last order.
    https://support.skype.com/support_selection/
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Maybe you are looking for