Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Similar Messages

USB audio input to voice-over tool not working

with FCE-HD on iMac i have system preferences set to USB-122 Tascam box for audio input/output (works great with GB for instance) but when i try using it for audio input on FCE and the voice-over tool set to USB-122, i hear no audio, the level meter doesn't more, etc, its still taking the audio from the built-in mic.
im sure its something simple im overlooking??
tia

Mark,
See if this post helps. Not familiar with USB audio devices myself, but found this searching:
John Hayward, "Audio out from FCE HD to USB audio iMic" #1, 10:11am Oct 4, 2005 CDT

Capturing Audio from DAT

Hello,
I'm trying to capture audio from a DAT deck (Tascam DA-20) into FCP HD by routing it through my JVC BR-DV600U DV deck (RCA output from DAT, RCA input to DV deck, Firewire into FCP).
The DV deck's input is set to line-in, and the audio is being routed through (audio meters on DV deck mimic those on DAT deck, and I can hear the audio through the headphones jacked into my DV deck).
However, when I try to capture the audio on FCP, I am unsuccessful, prompting the following window from FCP: "Error: Final Cut Pro HD was unable to read the movie file just captured."
Now, I use the same set up I described above to capture footage from my Beta deck into FCP with no problems (route Beta signal through DV deck and firewire it into FCP). This leads me to believe that perhaps the glitch lies within my Capture Presets.
At first, I tried to capture the signal as an Audio-Only DV NTSC 48 Khz/Non-controllable device. After that failed, I tried to create my own capture preset, but am not sure it will make a difference, as the only input choices I am given are DV Audio, Built-In Audio, and None.
Any suggestions?
Thanks.

Why not capture the audio content outside of FCP, check the sample rate for 48Khz/16-bit, convert if necessary, save as an AIFF file, and then import that resulting sound file into FCP?
Any good audio app, including STP will do captures.
You are probably going to need to do some cleanup on the audio anyway before you use it, so why not just use an audio app to do it beforehand?
Besides, if you have an audio device (PCI card or Firewire device) in your Mac, you can use the S/PDIF port for your connection to the DAT and do a digital transfer when you import.
As I understand the way you are doing it now, you are taking digital content from the DAT, converting it to analog for the connection into your deck, and then re-converting it into digital when you capture it back into FCP.
One big advantage of digital audio (and video) is to avoid generation loss and added noise during transfer if you go D-to-D.
If you don't have an audio card or Firewire A/D audio I/O device with S/PDIF ports in your Mac, then see if you can find a friend who has one and can do the transfer for you. Then he can give you the file on a CD-ROM.
That's what I'd do.

Unable to capture data from drop down list in custom added field in migo tcode at item level

Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.

Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
    values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
    values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
    APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = '<SCREEN INPUT FIELD NAME>'
      values          = values[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
        <inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected

Unable to capture video from webcam in JMF in xlet

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?
Thanks
Rajesh

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Unable to capture video from webcam in JMF

hi
I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?

MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
Steve.

Can JMF capture audio from sound card?

I want to know if JMF can capture sound/audio from the sound card. Until now we have been capturing audio from microphone. but is there any possibility of capturing audio from sound card using JMF.
The audio captured from the sound card is to be streamed using JMF/RTP API.

Dear seniors,
i have tried to display my audio file as a graph as
x axis being the Time and the y axis beeing the frequency/pitch.
look at this post, i have mentioned all here...
http://forum.java.sun.com/thread.jspa?messageID=3073027&#3073027
is it possible to display as i desired?
wht the audio stream has? is it frequency or pitch?...
pls do give me some tips on that...
thanx in advance
-Munas.

Capture Audio from Mic

I am new to Java and need to know where to start with developing a Java app that can capture audio from a pc's mic, convert it to mp3, name the audio, and store it in a directory of my choosing. Additionally, I'll need an interface to that audio app that can receive function calls and args from a windows-based application.
Can you point me in the right direction- sample code if possible.
Thanks,
Jeff

I have the same problem. There doesn't seem to be any sample code for capturing an audio recording with JMF! I have browsed the web, the usenet groups and the (physical) library. It's almost like they try to keep it secret :/
There is plenty of information on how to use the JMF player, though.

Capturing audio from telephone for use in FCP

My requirement is quite specific, and so far none of previous posts seem to answer my question. So...
I'm looking to capture audio from my telephone for use in FCP. It won't be a telephone conversation, but a voice text. In other words, an SMS sent to a landline. The audio is saved as a voice message on the answer machine. My phone / answer machine is fairly basic - it has a speaker and the only ports it has is for power and the telephone line itself. I have tried a very basic method of playing the message on speaker and capturing it on a mini DV - but that results in too much audio edit to get it to sound acceptable. My Mac is a G5 and I have the full FC studio, but just not sure of best way to get audio onto the Mac without losing too much of the sound quality.
Any suggestions?
Many thanks all...
Kirsten
iMac G5
iMac G5

you need a telephone audio interface like the products made by the fine folks at gentner, telos or jk audio. i have a celltap from jk audio, works very very well. http://www.jkaudio.com/celltap.htm

Using Flex to capture audio from Flash

Hi!
I've been trying for a while to figure out how to capture audio from a flash-application (http://www.delorean.se/mixer)
and store it as a mp3-file.
Since I've studied Java for 2 years I thought I'd try and use it to capture the audio but I'm running into problems all the time,
and I've been advised to look up Flex by other Java users.
So, I got some questions:
Is Flex a good tool to use to capture audio from flash-applications and store the audio as a mp3-file?
Is Flex hard to learn (I've been working with Eclipse for a long time so the IDE shouldn't be a problem and learning another language/framework is always nice)
Any tips in general?
Any answers would make me very happy!
Thanks!

physical are closed : how will it managed the queues and overspill queues when target is not present? Also the data dictionary must reflect the primary but If you run capture, then you introduce rules that are not on primary: How ?

Capturing audio from microphone and save it to a file

Hi!!
I'm searching for a code using JavaSound that allows capturing audio from a microphone and save it to a file.
thanks in advance and sorry for my English

Hi,
Check out these links.
http://developer.java.sun.com/developer/technicalArticles/Media/JavaSoundAPI/
http://java.sun.com/j2se/1.3/docs/guide/sound/prog_guide/chapter5.fm.html
Also this is a very good site for finding similar issue as yours.
http://www.jsresources.org/examples/audio.html
Hope this helps.
Regards,
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

Capture audio from MIC and decode bitsream

Hi, I am new to windows phone 8.1. I want to capture audio from the MIC using MediaCapture, first I can capture to the audio using recordToSorageFileAsync but I cannot capture it to just to a memory steam, how is this done? Also after it is captured either
way the recorded data needs to be broken up into a byte array, so that I can bit decode, i.e. I need to determine what is a high and what is a low, the audio is Manchester encoded given a 1 = 25mSec on 25mSec off and a zero = 25mSec off 25mSec on, how can
I decode the audio to find out this pattern, the audio pattern will have a fixed preamble of FF followed by the data.

StartRecordToStreamAsync
method provide the possibility to save to memory stream.

Trouble viewing audio levels in Voice Over tool

Hello,
I often record voice over into Final Cut Pro using the Voice Over tool. In the middle section of the Voice Over window there is a 'Level' meter that flashes Green to Yellow and Red, illustrating the level of audio being fed into the Mac. For some reason though, this has stopped working for me.
My set up is this: A Mic in our voice over booth connects to a Soundcraft 4 channel mixing desk via an XLR cable. The mixing desk is linked to a JVC HD tape desk, which is connected to the Mac via FireWire.
Previously, to capture Voice Over I set the tape deck to 'Line' input, in 'DV' mode and set the Voice Over tool to 'DV Audio' as the source.
I can see sound levels on the mixing desk. I can see sound levels on the tape deck, but I can't see sound levels on the Mac's VO tool. Despite this, it does still capture voice over (I just can't 'see' it).
This problem is annoying because it means Im unsure whether the Mac is actually receiving an audio feed or not unless I do a test recording first.
Any suggestions as to why the Voice Over tool would suddenly stop showing me Levels, would be greatly appreciated!

My secondary Mac works fine when the AV settings are set to HDV, despite it receiving standard DV audio input. Whether FCP is set to DV or not doesn't seem to matter in this case.
In trying to resolve the issue I played around with DV/HDV settings within FCP and the Deck; trying different combinations, but with no success.
+To recap (just to clarify in my own head), the situation is this:+
+Both of my Macs, Primary and Secondary, happily record Voice Over, via the Voice Over tool.+
+The Mic in the sound room connects to a Mixing desk via an XLR cable. The mixing desk is also connected to 2 sets of headphones, one for the Artist and one for the Engineer. 2 audio jacks connect the mixing desk to the JVC tape deck. The JVC tape deck connects to my Mac via FireWire to the port at the rear of the Mac.+
+The issue is that the Primary Mac does not display audio Levels in the Voice Over tool, whilst it does on the Secondary Mac.+
+While Im recording Voice Over on my secondary Mac I can see that there is an Audio input because the Green/Yellow/Red bar flashes up. On my Primary mac this bar is inactive and therefore gives me no clues as to the level of audio being fed into the Mac.+

Unable to capture audio

Hi,
Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
Where is the problem?
Thanks,
Simon

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Capture audio from separate device

Is it possible to capture from a camera, but record the audio at the same time from a different audio device, e.g. soundcard?
(My camera does not have a separate audio input with reasonable quality, so one could save from having 2 separate files by recording video from camera plus audio from soundcard. I'm not sure if that would really work due to latency problems, but I'd like to give it a try if possible.)
Thanks!

My practice is to capture sound separately using an hard disc recorder,from two to twenty-four tracks, and to combine this with the video in Premiere Pro. I use the sound track on the tape to achieve synchronization (which is very easy in Premiere Pro). If the room is small (<100 feet) I can use an on-camera microphone. For best results I use a wireless feed from the recorder to the camera.
It's important to use a digital recorder, preferably at 48KHz sampling speed (you can convert from 44.1 or something else, but the speed may slip). An analog source, like a cassette deck, varies too much in speed, often more than 5%, to be useful. The sync slip is usually less than 3 frames per hour of recording. Most digital recorders have a digital output which can be captured directly by the computer through firewire or USB. If your only choice is an analog sound card, don't bother - too noisy and bad timing.

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Similar Messages

Maybe you are looking for