Unable to capture ch2 audio

I have just installed FCE 3.5 and I am only able to cature video with audio on ch1, the clips with audio on ch2 only are mute. I am using a sony dsr 25 to feed.
Thanks
g5 Mac OS X (10.4.9)

Have you double checked the cable and
VCR settings?
Try trashing the FCE preferences if the hardware checks out.
AL

Similar Messages

Unable to capture 2 audio tracks

FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

Hi boxpuppy,
iTunes is not able to import some Windows Media Player files. See this article for further information -
Importing Windows Media Audio files with iTunes for Windows
http://support.apple.com/kb/HT1844
Thanks for using Apple Support Communities.
Best,
Brett L

Webcam Live - Unable to capture Video when "audio" is on

Unable to capture Video when "audio" is checked.
Error message "Unable to capture Video - check settings for video compressor and Audio compressor". What are these ??
I have Plantronics headset and have tried most "8bit, mono settings"
Capture Video works when audio is not checked.
Am at latest s/w and driver patch levels.
HELP !!!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

FCP unable to Capture Canon GL2

Hello -
My system is noted below. Final Cut Pro is updated to 6.0.4.
I am unable to capture the video using Canon's GL2 using the current version of FCP. I believe that I have everything configured correctly because I am able to capture audio and video using my father's JVC GR-DV800U video camera. Actually that particular JVC camera seems to work quite well with FCP. But not Canon's GL2. I am able to control camera's Rewind, Fast Forward, Play, etc. So I know that some communication is taking place. However, no picture is present within FCP; no capture either. Instead, I get that dreaded beach ball wheel.
I believe the FCP settings are correct: Under "Audio/Video" settings, the audio is set to MOTU's 424 (for the 2408 MK3); the DV Capture Preset (and the Sequence) is set to "DV NTSC 48 khz"; Video Playback is set for"Digital Cinema Desktop Preview - Main" with the audio playback set (again) to MOTU's 424 card.
I am attempting to capture the video to an external hard disk drive using the Mac Pro's firewire port located in the back of the computer. Again, this all works using my father's JVC video recorder.
*Given the computer setting and operating system, is this a known issue between the FCP and the GL2??* My GL2 is an older video camera. I purchased it quite a few years ago. *It seems like the GL2 may be the culprit. Yes? No?*
I'm very new to FCP. My background is with SONY's Vegas program (currently I'm up to version 8). Been using the Vegas program for years. My Dell Workstation, unfortunately, is old; it definitely is showing signs of aging. So, to make a long story short, I've decided to invest time and money in a Mac Pro (I use it primarily for music sequencing using the Logic Pro program which I love!) Now I want to learn how to use the FCP which I purchased several months ago. Not being able to have FCP communicate with the GL2 is a minor significance for me, though. I'm in no financial place to purchase a new camera at this time. Luckily, I usually record the video using Focus Enhancement's FS4-Pro with the GL2. So I am not totally dependent on having FCP and the GL2 work together. *Thankfully, the FS4-Pro DOES works well with FCP!!* Too bad I didn't use the FS4-Pro today. Wish I did. UGH
Could there be a work around in getting the GL2 to communicate properly with FCP??
Thank you in advance for your thoughtful insights and suggestions.
Regards,
Ted Fiebke

Not all Canon cameras have connection issues, but hanging around this site I've come to recognize their ability to connect in FCP is the most problematic of all the camera brands. If you have a Canon camcorder, and can not get it to connect up with FCP, the following is a way to sort through the issues and get it to work. Some are elegant - some are ugly.
Before we go any farther
• You should be using 'Firewire Basic' as the control protocol. If you aren't, go change it and try again.
• Also, verify that you have a solid installation of Quicktime. You may want to reinstall it using the 'delete receipts' method.
With some confidence that the software installation and camera settings are correct ... the most direct solution is to purchase another, non-Canon device to use as your capturing machine. The (now discontinued) Sony DSR-11 is highly recommended for DV work. A deck will save wear and tear on the camera's lightweight drive mechanism and will allow you to permanently connect a NTSC/PAL monitor for proper viewing. If you are working with HDV, you may have other issues ...
Beyond that, the path you take depends on the model of computer you own.
1. If you have a G5 tower or a MacPro, capture to a second internal drive with only the camera attached. If you need to move material to firewire drive, disconnect the camera. A second internal drive is quite inexpensive these days if you do not already have one.
2. If you have a G5 tower (PCI) MacPro (PCI), G4 powerbook (PCMCIA) or MacBookPro (Expresscard 43) with an available slot, purchase the appropriate firewire card for the slot. Connect your camera to the card and you should be good to go. The new card creates a unique bus and will avoid collisions with the external drives.
3. If you do not have a slot or a second internal drive and you are stuck with the camera, welcome to the camera/drive shuffle.
• shut down and remove the external hard drive(s) from the system
• connect the camera directly to the firewire port of the computer
• start the camera then the computer
• capture to your internal (system) hard drive
• shut down the camera and computer
• disconnect the camera and reconnect the external hard drive(s)
• start hard drive(s) and computer
• move captured files to external hard drive(s)
• edit
If you output back to tape or wish to view your work on an external Video (NTSC or PAL) monitor, you need to set up the camera to use the firewire out as the A/DV converter or VTR - which means reversing the steps:
• copy the file back to the internal drive
• shut everything down
• disconnect the external drive(s)
• connect the camera to the firewire port (and the TV to the camera if needed)
• start the camera then the computer
• play the file.
One caveat here - You may have difficulty getting the file back to tape without dropping frames. Playing files off of the system drive is very demanding and they may have a hard time keeping up.
All in all, if you do not have the option for second bus (i.e. iMacs, eMacs, iBooks, MacBooks) you may want to think about a computer with expandable options next time.
There is the option of capturing using iMovie, but that brings on it's own set of problems and is not recommended.
Good luck.
x

Error- "Unable to capture video..."

What is the solution to allow video capture in the preferred WMV mode. I know AVI mode works but compression sucks. Plus, my laptop was always able to capture vid in WMV until recently.
Now i get this error!!!!!!!!!!! Pls advice on this error:
"Unable to capture video. Pls check hard disk space and the following are set correctly: video/ audio compressor"
I know I am not the only one with this issue. yes, already tried uninstalling/reinstalling drivers and software fron the Creative website.
THanks a lot for solutions!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Suddenly Unable to Capture

For the past four months I have been (more or less) successfully capturing from miniDV tape with FCPX. I use a SONY HDV deck and occasionally a SONY DCR VX2000. Suddenly this morning I am unable to capture. The deck is recognized by the computer. It appears under CAMERAS in the upper left hand corner of the Camera Import window. Further more I DO have control of the deck using the buttons at the bottom of the Camera Import window. The time code counter also appears and behaves normally. However there is no audio or video. Just a black screen. I switched the firewire cable and tried a different deck, neither of which made a difference. Same substitution drill with the tape had no effect. I then tried the same orginal deck and wire on a different computer (someone else's) and was able to capture successfully. Unfortunately, I am not able to do so on mine. Any thoughts would be greatly appreciated.

Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
Doesn't fix every problem, but it fixes a lot.
Andy

Final Cut suddenly unable to capture from any source

I suddenly started having an inability to capture in Final Cut. I have always used Final Cut Express and a Sony handicam and a firewire port.
2 weeks ago when I went to capture I started getting “dropped frames” error messages. As you know, unchecking that feature in FCE or FCP simply results in video and audio that don’t match up. Anyway I tried that and it didn’t work.
I have used two other firewire cables
I am using OS 10.5.8
in trying to fix this problem, I upgraded to Final Cut Express 4 (from 2.0)
I trashed preferences.
I used disk repair and verify permissions
I booted up and down
then I gave up on the sony handicam and connected my G5 to a JVC editing deck I have, the JVC SR-DVM70.
When I connect my G5 to my JVC deck through the firewire In/Out port, I get the message, “VTR OK” so the connection is there.
When I hit “play” in Final Cut, it does control the deck and makes it play—but I do not see the video in Final Cut; I only see it on the JVC deck monitor.
When I hit “stop” it does not make the JVC deck stop. The only function it seems to control is simply “Play.”
Then when I go to capture, I get the message: "unable to capture because there is no video."
I have tried several different “Easy Setup” settings, including several firewire settings (including basic firewire) and several NTSC settings and a PAL setting.
Weird.
anybody out there a genius with this?

There is a separate forum for FCE.
Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

Unable to record just audio with Mac Mini - no isight

I am trying to use Podcast Capture on a mac mini connected to a generic monitor (no isight) and it is unable to initialize the audio subsystem. I am assuming this has to do with it needing a video camera, but surely that isn't required to record an audio only podcast. I have a microphone plugged into the line in and it works successfully in Garageband. Please help!

Take a look at Soundflower, which will allow you to record audio from any source:
http://soundflower.en.softonic.com/mac
http://www.macworld.com/article/1159440/soundflower_capture.html

Trouble capturing just audio from beta tapes

Hello, I am trying to capture some audio-only beta tapes and having trouble. The deck is all hooked up correctly (deck to IO box to mac), and I followed the manual instructions on how to create an audio only capture setting. When I go to capture the audio, I can hear the audio playing and it says "now capturing", but when it stops I get an error saying "Final cut was unable to read the movie file just captured." Is anyone familiar with this kind of problem? Let me know if you need anymore information about my settings (unfortunately I am relatively new to final cut).
Thanks,
Mike

Try this (no guarantees but it used to work): Go into your scratch disk settings and enable "capture video and audio to separate files." Wasn't consistently a problem, but when it was, this solved it. But I used to get the error when tried to initiate the audio only capture. Be sure and turn this off before you capture video and audio.
Also, what happens if you try and capture video and audio of the same section? You can always just export the audio and then delete the capture.

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture user comments and responder in RESPOND API

We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
owf_mgr.wf_notification.setattrtext(p_nid,
               'RESULT'          ,
               'APPROVED');
-- This procedure then caused the WF to advance to next step
-- Respond to notification, depends on RESULT setattrtext above
owf_mgr.wf_notification.respond(     p_nid, -- notification id
     p_respond_comment,     -- response_comment
p_responder     );     --responder role
Any help is greatly appreciated.
Thanks,
Raj

If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
Thanks, Vijay

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Unable to capture ch2 audio

Similar Messages

Maybe you are looking for