Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

Hi I'm attempting to capture HDV footage from a Sony Z1.
I am trying to capture some HDV footage I shot with the Z1, but FCP simply refuses to recognize the Z1
I'm certain I've got all the settings correct:
- Camera is set to HDV firewire out
- capture presets is set to HDV
- device control preset is set to Sony HDV FireWire
- sequence preset is set to HDV 1080i50 (I'm in Australia)
- footage IS HDV 1080i50
But I keep getting the "Unable to Initialize Capture Device and Device Control" popup. I've tried everything
- rebooted the camera
- restarted FCP
- rebooted the system
- changed the capture/device control settings in FCP and tried out a regular DV deck to make sure it wasn't the cable
Nothing has worked.
I'm on a MBPro I7. No Kona card or anything like that, just trying to capture through firewire.
Any suggestions would be greatly appreciated.
Thank you,
Matt
At present it will capture HDV in IMovie but not FCP 6.0.1
Message was edited by: Matt Blyth

Thanks Adrian, since posting the thread I've thought of that too but unfortunately to no avail. From other forums I've read this seems to be a central theme to the solution to my capture woes. I since have sorted the problem it was in Audio/Video Settings.
In the end I set my Audio/Video Settings to:
Sequence Preset to: Apple Intermediate Codec 1080i50
Capture Pre-HDV- Apple intermediate Codec
Device Control Preset: Sony HDV 1080i50 Firewire
And hey presto my I'm capturing HD without any problems. Thanks everyone for your suggestions.
Message was edited by: Matt Blyth

Similar Messages

Capturing footage to FCP 6.0.1 from Sony HVRZ1U HD Camera

I'm doing an HD project using a Sony HVRZ1U camera. I'm capturing footage from a Sony HDV GV-HD700 deck. I get nothing in the viewer when I go to log and capture and I cannot capture anything when I press capture because there is no video signal. I can see video on the viewer for the deck. When I change the settings on the deck from AV-DV out, I can see a stretched version in DV quality when I change the settings. I just cannot see a HDV signal to my computer. What are the correct settings for capturing this format? I've tried all the various possibilities and haven't been successful. The deck is connected to the computer via firewire to the HDV/DV iLink cable. Is this deck compatible with FCP? Is the video too much info for the computer?

When setting any Sony HDV device to output HDV you should disconnect the ilink/wirefire cable first, in the menu find Rec In/Out and set the ilink Conv to OFF for HDV. Then connect to the computer when both computer and deck are turned off.
If you have 6.0.1 then why not updated to the latest version, if you do update you will also need to update Quicktime.

Does FCP 7 support 4k from Sony NEX-FS700UK Super 35 Camcorder? Or should i migrate to Adobe?

Does FCP 7 support 4k from Sony NEX-FS700UK Super 35 Camcorder? Or should i migrate to Adobe?

You might be interested in this article.
MtD

Unable to capture HDV footage with FCP 5.1

I've captured HD footage onto my old computer (10.4.11) without any problem but now I'm trying on my new one and it doesn't want to know.
First off there was a problem with the Firewire port ejecting my hard drives randomly so I took it to be repaired and they replaced the logic board and the port works fine.
I've looked at all the posts I could find, I've trashed my preferences, reinstalled Final Cut Studio ( after uninstalling then updating the software). I've made sure the camera is set to HDV playback rather than auto and that the iLink HDV/DV conversion is off. I've tried all the easy setups and all the custom ones I could think of but still FCP (5.1.4) won't allow me to capture. On some settings I have had device control but no image, on others it said the camera isn't connected. The only way I've captured footage is by using the HDV Apple Intermediate Codec 1080i50 which works fine.
The camera is a Sony HDR-HC7 connected directly to the iMac with a Firewire 800 / iLink cable or daisy chained through my external hard drive with a 400 / iLink cable (neither of which makes any difference) I can also capture SD footage from both the HDV and a Panasonic SD camera when in DV-PAL setup. The HDV camera also shows up as connected in the system profiler.
This is driving me nuts so any help would be appreciated and if there's any other info I can help with to make this clearer let me know.
Message was edited by: MrMajesticMole

I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
Steve

Problem Capturing from Sony HVR-A1U to FCP 5 using HDV preset

Hi,
i just got a Sony HVR-A1U and am new to HDV. I am a professional editor so i have a full understanding of FCP. Here are my problems and questions.
Specs of system : Power Mac Dual 2Ghz G5, 1.5GB Ram, GeForce FX 5200 64mb (Do i need a better GFX card?)
1) When i setup the project settings at the start I selected HDV 1080i/60, it automatically states "Codec not found. You may be using a compression type without the corresponding Hardware card." I am quite sure that i have all the codecs i could have without having a hardware card, since i don't have a hardware card. Does this mean that i need a blackmagic HD card or a Kona card just to process the HD into FCP as HDV 1060i/60 even though it is through firewire?
2) I advanced to the Log & Capture mode with the HDV settings, set properly across the board. I can not see picture, can hear audio and can log clips. When i capture it captures black for video but captures the audio just fine. I figure this is because of the missing codec which encodes HDV for FCP from Sony's HDV encoding?
3) I can capture on the fly with the Apple Intermediate Codec, no Log and Capture screen comes up, just a dialogue box that asks me to name the clip. I understand what this codec is and find that i am stuck at the moment using this until I find a way to capture the other way. Is there anyway to have the Log and Capture screen launch using this codec?
4) I can not have pre-logged clips using other methods and then batch capture them using the Apple Intermediate Codec, it just reverts to capturing on the fly. Anyway to Batch Capture using the Apple Intermediate Codec?
Funny thing is that i can digitize fine in iMovie HD although i don't know what codec it is using. This totally baffles me that it works in a certain manner, i can get the job done, but not the way i should be able to. I've been using FCP since '99 and have never encountered something in this manner. And since this is my first experience with FCP and HDV i have nowhere to go from here except get some help or settle for what i can do and change my normal post-production workflow.
A question i really want to know about is whether i need an extra hardware compnent, i know i asked that question above, and i could understand if i did. (i.e GFX card or Capture card - even though i am going through firewire)?
I appreciate any help, i might not respond over the next couple of weeks because i am shooting in Europe and will be back stateside at the start of February, so i will not be active on this post until then. Any input would be great and when i get back i will have loads of footage that i will need to digitize, so i will be very open to help with troubleshooting as well.
Thanks again!!!
Gabe
PowerMac G5 DP 2Ghz, 1.5GB Ram, GeForce FX 5200, 20" Cinema Display Mac OS X (10.4)

All the settings are proper, like i said, it captures with the apple codec for HDV but that is only good for on the fly. iMovie captures it fine, it's just when the settings in FCP are set for HDV it won't capture picture through log and capture.
Are you guys actually reading my post??? I have given all the information that i can, settings are proper, so the post so far are completely redundant.

Sony V1U Not Capturing HDV in FCP 6

Hi all
I am running FCP 6.0.2 on a Dual 2GHz PPC G5 running OSX v 10.4.11
I shot some footage on a friend's Sony HVR-V1U in 1080i. I used the 1080i 60 easy set up to create a project in FC and the log and capture window never sees the camera. I checked all the settings on the camera -- the in out menu is set to HDV, etc... all the things everyone online says to do... but still nothing.
So I tried capturing in iMovie and voila -- it sees the camera and controls it and captures with no problem...all those movies import into FC just fine, but I know that iMovie is converting the footage to a different codec...and I want FC to do what it should be able to do...so I still want to fix the problem...
The only other thing I'm wondering is do I have to be using the weird Sony proprietary "iLink" cable? (The one that plugs into the side of the camera under the LCD?) I'm just using a the usual firewire cable that I always use for cameras -- and in this case that cable plugs into the V1U at the spot that says "HDv/DV out" on the back of the camera, so I THINK I'm ok, there, but I dunno.
Has anyone had this problem? Has anyone solved it?
Thanks
Rob

I followed your list -- one menu setting I didn't see on the camera was AV/V-DV...I looked at the menus when the camera is set to VCR and also when set to Camera and I didn't find it...can you please clarify?
In any case, I followed your kind instructions to the letter (with the obvious exception as I've stated above) and still no go. One new wrinkle, though: When I start FCP now, it asks me where the external HDV device is -- it's looking for the camera even though it never saw it before...(unless it's remembering it from when I tried successfully to capture the HDV as plain old DV footage)
This is really frustrating.
Rob

HELP! No longer able to capture HDV in FCP 6

I had a seamless FCP workflow using my Canon XH-A1 and FCP 6. I always connect my camera and power it up first before starting FCP. My settings were perfect, then about a week and a half ago FCP would no longer capture HDV from the camera. I tried redoing the easy setups: HDV > HDV:1080i60. Then I tried all the other variations. I tried trashing the preferences and restarting my computer and all that. Then I tried to see if Toast 10 would recognize the HDV camera to capture... no. But all works fine when set to DV mode. Everything about this situation seemed to have pointed to the fault being with my camera, so I sent it off to canon to check it out ($$$). Today I borrowed a friends Sony HDV that has worked fine before and it too failed. FCP is not recognizing the HDV camera. In an act of desperation, I installed iMovie and opened it up, I connected the camera... wth, it works!?! I am now convinced that there is something not right with FCP. Any help on this would be greatly appreciated!!!

I figured out the problem!!! It was "Rosetta". Hopefully this issue will help someone else in the future!
When I upgraded to Intel Mac Pro from G5, many plugins were not supported. About a month and a half ago I opened an older project of mine and had problems rendering some vital sequences with several plugins from the G5. After going through every plugin I had and reinstalling them one by one, many plugins still would not work. My solution was to use Rosetta with FCP...
I had not captured any HDV media since turning Rosetta on for FCP, and I guess forgot it was even on. I clicked on the FCP App and hit "command + i" for info, unchecked Rosetta, and instantly my HDV is capturing perfect again!
I wish I could use an abundance of prolific and explicit vocabulary words to express knuckleheadedness of my inability to not figure this out sooner...
ROSETTA was the CULPRIT of this issue!

Unable to capture HDV with Sony HDR-FX1 in FCE 4

Hello all,
Been using an HDR-FX1 for a while, shooting mostly DV, and today I began experimenting with HDV. I shot 8 minutes of footage with the camera in HDV mode.
When I setup FCE 4 for Apple Intermediate Codec 1080i60, the capture window doesn't recognize the camera. However, if I set the FX1 to down convert to DV via firewire, FCE recognizes the camera and I'm able to capture.
How do I (or can I) capture HDV into FCE 4 with the FX1? Is there something (a setting perhaps) that I'm missing? Do I need to jump to FC Pro for this?
My system: 1.6 GHz PowerPC G5 (tower), 2 GB RAM, Sony FX1, FCE 4.0, QT 7.3.1
Thanks in advance,
tg

I had a similar issue with iMovie08 import using HDR-HC1... You may want to try this to see if it helps:
1> Close the import app (FCE, in your case)
2> Unplug the FW cable from the camcorder (Most important step)
3> Go into the Sony menu and re-select the HDV settings (explicit HDV, not Auto + Conv off) in the camcorder
4> Re-connect the FW cable, and restart FCE
I use these steps successfully while switching between HDV and DV imports from my camcorder using iMovie 08. Hopefully, this resolves your problem with FCE. Later this weekend, I plan to experiment (for the first time) with FCE HDV import to try and see the export quality difference between FCE and iM08 (which apparently downconverts everything to 540 lines!).

Unable to capture the value of vbrk-vbeln value from VF02

Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
john

Hi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu

Capture from Sony HVR-A1E

Hi
I have Final Cut Pro 5.1.4. I recently acquired a Sony HVR-A1E. It shoots in HDV 1080i.
I'm trying to work out how I can capture the video using FCP?
Is there an appropriate capture preset and device control preset?
For capture preset various things are listed such as HDV, DVCPRO HD 1080i50 48KHz, DVCPRO HD 1080i60 48KHz and others.
The camera connects to my Intel iMac by USB. I notice that FCP seems to list Firewire throughout its device control preset menu. Is it possible to have device control for USB?
Thank you for any assistance you can give

Hi
I've found the FireWire port
They've called it "iLink".
A bit of "googling" with "iLink" has shown me that this is commonly used on Sony Camcorders.
I have used Sony Camcorders before and but they've been hired ones and I think it has always been that the person hiring it out has pointed at the "iLink" port and called it the "FireWire" port, so I've never caught on that this different name exists.
I'm buying the right cable next...
When it is plugged in and working (touch wood) I will come back and do this "helpful" and "solved" thing.

Capture from Sony HVR-Z1U

I have recently purchased a Sony Z1U and was unable to capture in FCE4. I later found out that FCE4 will only capture from the Z1U in DV mode and NOT in HDV. Why is this? Is all my HDV media useless now that I have FCE4? Should I only shoot in DV mode from now on? I also have a small Sony HRD-CX7. Will FCE4 capture from this device?
Any help for this newbie would be appreciated!

"do not connect to the computer. Connect it to the hard drive so they are on a single FireWire chain. The computer will have difficulty passing information back and forth on FW when there are multiple devices on multiple ports but on a single bus"
In theory this may be true, however my external drive only has (2) 1394b ports. My camera has (1) four pin 1394a port that converts to a six pin 1394a through the cable assembly. There is no way to chain these components together (via my external drive anyways) as far as I can see. Is this a critical issue? Should I invest in a different drive? I guess I could connect to my ED via esata using an express card. Would this approach lessen the load on the FW bus during capture and delegate a separate bus for ED control?
Any thoughts on this?
Message was edited by: Chad Clemens

FCP 6.0.5 and Sony HVR-M15U - DV Connection Issue

My head is hurting at the moment. I cannot get my Sony DV deck to be seen in FCP 6.0.5. I can see the deck as HDV. For DV mode, you have to turn on the iLink conversion. I have set the deck to iLink Set - DV SP. BUT... Final Cut Pro does not see the deck at all.
Here's the specs:
Mac Pro (Late 2007) Quad Pro 3.0
8 gig of matching paired RAM
FCS 2.0 with all of the latest updates.
MacOS 10.5.6
AJA Kona 3 driver version 6.03
AJA Io driver version 2.01 - disconnected unless needed for capture from older tape decks
ATI Radeon XT1900 (512 RAM)
ATTO Celerity FC-42ES fiber channel card
Quicktime 7.6
Adobe Creative Suite Premium CS3 (with all updates applied)
I have checked Apple's tech site and forums, nothing other than removing the old Quicktime receipts and reinstalling Quicktime. I tried this... Still nothing. I tried to use another deck, a Sony HVR-M10U. Nothing!
Before you say, its the firewire connection in the computer, HDV does work just fine. Its DV that doesn't work. I have used it just fine with Adobe Premier Pro CS3 (DV capture and Export to Tape). Apple's iMovie sees the deck just fine, too. I wish I had an HVR-1500 deck so that I could bypass this issue, but I don't have one.
What I ended up doing was exporting my sequences from FCP using Quicktime Conversion and setting it to DV Stream. Then I can import my video into Premier Pro CS3 and Export to Tape. Works perfectly.
If I go back into FCP and try this, I get an error message telling me the firewire connection is not found. My iLink lights on the front of the deck are also off. Its not showing any iLink connection on the deck. Now, when I open Premier Pro, the iLink light comes on for DVCAM.
Makes you go, hummmmmm........
HELP!

>could not get PP CS5 to display the video
As far as I know (from reading only, I don't do HDV) PPro does not show the video during capture... this is not a bug
You should (again, reading only) be able to see the video in PPro while simply playing it on the camera and not actually capturing
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Over on the Win side many people use HDVSplit for capturing, but I have no idea what is available for a Mac

Is FCP X compatible with a Sony HVR-V1U camcorder?

I used the camcorder compatibility query tool but did not see the HVR-V1U or V1N listed.

Thanks, Ben. That is indeed the plan. I was just fishing to see if anyone had actually captured from an HVR-V1U or N into FCPX. Agree that it SHOULD . . . a Firewire connection from tape media is a standard thing. But I never cease to be amazed at technical surprises.

Unable to capture HDV with Sony HVR-V1E camcorder

Has any one else solved this problem?
Thanks
Lawrence Cave

See if this helps.
http://forums.adobe.com/message/4708997#4708997
GLenn

Can't capture HDV from Sony z1 on FCP 7

Hi,
I have set 'easy setup' to HDV (I have also tried HDV Fire wire basic) I've followed tutorial on all the set ups to capture. But when I go to capture, FCP can control the play buttons and I can see the time code on screen but there is no picture or sound coming through to capture and is says 'Capture was aborted due to no incoming data from device'.
I have checked everything.
I followed all the suggestions in an older discussion in this forum -
Unable to capture HDV footage with FCP 5.1
This was the last post in that discussion:
"Re: Unable to capture HDV footage with FCP 5.1
May 23, 2010 4:37 PM (in response to MrMajesticMole)
I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now."
I followed all these tips and nothing has changed. This is the first time I am using HDV in FCP. I have used the same Sony z1 camera to shoot and capture DV footage in my current FCP set up and I've had no problems.
The only wierd thing is that under easy set up I selected HDV first with 'all rates' under frame rate. When that didn't work I tried "HDV fire wire basic". Then I tried to put the frame rate in a 50fps. When nothing made any difference I put the frame rate back to all frame rates and while still on Format: HDV selected HDV 1080i50 and also have tried HDV 1080i50 with 'all frame rates' and everythime I go back, it's defaulted to 'HDV 720p50' in the 'use box and frame rate 50fps.
I would really appreciate help with this.

Hi Russ,
Thanks for getting back so quickly.
I was feeling hopeful because I realised I had the fps rate set to 50 and when you said 25fps I thought that must be it. Unfortunatly it hasn't worked at all. It keeps saying there's no data incoming data from device, yet it acknowledges the timecode and I can control the camera from FCP.
I double checked my settings and made sure the camera was on before launching FCP. I am going to study the document you included to see if there is anything else I am doing that isn't working. I am wondering if there are some audio settings mucking it up.
If you have any other thoughts let me know. I will let you know if I figure it out.
Cheers,
Carolyn

Unable to capture HDV in FCP 6.0.1 from Sony HVR-Z1P

Similar Messages

Maybe you are looking for