Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Similar Messages

Creative live cam voice help please

Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
Arthur

Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur

Live cam voice ......errr Help please

HI all,
I wish i never uninstalled my web cam....never had it working since.
I;ll put you all in the picture....Dell, Win XP Pro, SP3, and trying to install Live cam voice.....
Unfortuantely i think i have misalid !! the main CD it came with.
I have installed the drivers ( the most up to date ones 1.02.08.0710 ) and application package on the creative web site for XP.
The application seems to freeze, the web cam works, but when it tries to install the drivers, it halts for ages on the wdmaud.drv to c:\windows\system32.....is trying to install that driver section for over an hour now, if i disconnect the usb end ( which i will do now, it says its installed ok and finished ) but not not recognise the audio section. It shows up ok and fine on the video web cam, and also as i mention above the application seems to freeze adhock.
Advice given from ireland on the phone,
1) try tips from website ....like shut down anti virus and firewall etc ...done that no use !
2) uninstall, install the files from the CD
3) uninstall.... install from the web app and drivers ( which i have already done )
4) try from another PC...i have not got another PC!!!!!
Does anybody have any other tips...please help

Yeah, I hear ya! There is such a tremendous delay between sound and video that it looks like a bad kung-fu dub :womansad: I bought 5 of them for may office and they are horribly poorly synched. What's up?

Live cam voice & msn messenger

I bought creative live cam voice and I cannot get it to work with WINDOWS LIVE MESSENGER as it always crashes and gives the error message "the program has stopped working". Im using vista 64 bit and all the latest drivers.
I did get it working for a short while with MSN 7.5 but microsoft now prevent that version being used and when you try and install it windows insists on downloading live messenger instead.
Help please

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Live Cam Voice requires restart after system sleep under Vista

I have attached my Live Cam Voice to my brandnew Vaio Notebook which runs Windows Vista Home Premium and installed the latest drivers from the Creative website. The cam works fine, until I put the laptop to sleep mode and waking it up again. After waking the PC up, the cam is not recognized anymore and I need to restart the computer.
Anybody experienced similar problems and (hopefully) has a solution? Thx.

Did you ever solve this problem? I have a similar problem on my desk top running Vista Home. I couldn't get the Vista driver (download from this wesite) to load so resorted to trying the XP dri've. This seemed to work until Vista put the machine into "Sleep" mode. After coming out of Sleep mode I eith have to restart the computer or disconnect and reconnect the webcam.

Live Cam Voice Camera Please help

when i try to record a video i get this message.unable to capture video.make sure the following are set correctly.video compressoraudio compressor. Any help would really be appreciated. i can not record a video or take a picture.

Is it only on Skype? Does the error occurs on other video-chat software?

Live Cam Voice on HP DV8305 -- Video image very slow

I installed Live! Cam Voice on my HP DV8305 succussfully, it works, but the video image is very slow. it needs about 30sec to capture a frame, sometime just stucked. I changed the Display Adaptive Driver, used differrent USB IF, checked my CPU and Memery usage, my HD space, use differrent IM -- skype, MSN, .... Any one can help?

As further information, the issue seems to be with the exposure setting. When I turn auto exposure off, then set exposure down as low as it will go, the picture darkens, but the frame rate goes up. I don't have this problem with my Logitech QuickCam Orbit -- I'm not sure if the problem is with the firmware, or if the CMOS sensor in the Live! Cam Voice is just smaller.

Live Cam Voice OR wireless connection; not both

My new Live! Cam Voice blocks my wireless Internet connection. The Webcam works fine for taking photos and making little videos. But if I'm online, and plug the Webcam into a USB port, my connection is cut and I cannot restore it. Unplug the Webcam and sometimes the connection comes back, or if not I have to restart my computer, and it comes back then.
A previous Logitech Webcam worked perfectly.
Any ideas?
K

Below was copied from a post by: cjasonwilson on this forum and Worked on my live!cam voice product.
***Note***
When I followed the direction on this I found only:
LowerFilters value inthe file - I deleted that and all is well in wonder land!
Thanks to Cjasonwilson for some great info, the only thing to work after 3 calls to creative, gatway and one of my buddies dack in FL. Thanks Again!
I found a fix that worked for me and I hope it works for anyone else experiencing the same issue. I had to Manually delete the UpperFilters and LowerFilters registry values.
To Manually delete the UpperFilters and LowerFilters registry values, follow these steps:
1. Start Registry Editor (Regedit.exe).
START > RUN > (Type) REGEDIT (and hit ENTER)
2. Locate the UpperFilters and LowerFilters value under the following key in the registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDDFC6-80F-D0-BEC7-08002BE2092F}
3. On the Edit menu, click Delete, and then click OK.
NEXT: I went to my Device Manager in Windows XP > IMAGING DEVICES > CREATIVE WEBCAM LIVE! ULTRA then right mouseclicked and chose DISABLE. I Then Right mouse clicked again and chose ENABLE. Then Wallah! My webcam led cam on and the darn thing started working again.
HOW I DISCOVERED WHAT TO DO
I came across a link to a similar problem regarding a CD-Rom Driver install issue returning Error Code 9. This was the same error code that I recieved when trying to re-install my webcam drivers. So I poked around the registry near a similar path (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\) as mentioned in the article found at http://support.microsoft.com/kb/34060/EN-US/ until I ran across an entry that said Imaging Devices in it.

Unable to get Live Cam Video IM pro to work with MS Messenger

I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
Message Edited by Catherina-CL on 02-12-2007 08:39 AM

Bump, fixed the post.
Cat

Unable to capture in FCP 6, HELP!

Trying to capture dvx100 footage using FCP 6(studio2) with no luck.
When initiating log and capture, I can control my camera via FW, but preview is disabled as well as
ability to capture footage.
I have tried deleting pref's, deleting QT prefs, triple checked settings (NTSC DV), tried variations of
turning camera off/on during opening of FCP as well as using alternate ports.
I'm at a loss. Can anyone help!!?!?!
- Need to cut something asap.
Thanks.

Thank you Patrick. You have helped me before, so thanks again.
I do not have anything else connected to the firewire ports. I have an external hard drive, but I have tried to capture with and without the hard drive attached. I did recently back up using Carbon Copy Cloner to another hard drive, if anyone thinks this may be the issue.
I can't recall the exact error message in FCP (I have deleted the program trying to fix the issue, and focus on the capture problem in Quicktime thinking that if Quicktime and iMovie both don't capture, that the problem is not with FCP, but either with the OS or the back end of QT) I can re-install FCP to give you the exact FCP error message if you would like me too. Ie, if the exact error message is necessary.
Thanks again for your response.

Unable to Capture Footage! Please Help.

Hey guys,
I am having trouble getting Final Cut Pro to recognize the camera I am trying to capture off of. Does anyone know what the problem might be? Here are all my stats:
Final Cut 5
Camera: Sony DCR-VX2000
Connection: Firewire
Sequence Preset: DV NTSC 48 kHz Anamorphic
Capture Preset: DV NTSC 48 kHz Anamorphic
Device Control Preset: Firewire NTSC Basic
When I open Log and Capture I get this message: "Unable to initialize video deck. You may still log offline clips or use Capture Now."
Any advice you could offer me would be greatly appreciated.

Please give your full system specifications, what computer, what drives, how everything's connected, what settings are on the media, what settings you're using in Final Cut, and finally what version of the software, of the OS, and of QuickTime you are using.
Do not us FireWire Basic. That's for Canon cameras.

Unable to play live camera recording on ipad2

I want to see the live DVr recording online anywhere I am using my ipad2

What does that even mean?

Live! cam voice

I have a Live cam voice but im sad because it is vorking verry slowly.....i have update the driver but still vorking slow.....can someone help me...

yu right cam working veru slowly, but drivers for Win Vista is only BETA..... when creative creat new driver?PS ? ? ? ?.. ....
!!! ? 0 ?? 30!!! ? 640?480... ? 280... ?!!! ? ? ??!!!
Message Edited by Svartalf on 02-24-200802:57 PM

Live!cam Voice bad sound quality

I bought a live cam voice two days ago and have had to get it exchanged already due to the appalling sound and picture quality. The original cam would not allow over 640x480 resolution for video, the picture was dark and muddy, the exposure control did not work at all and the sound was dreadful. The exchange cam works perfectly ie 280x960 resolution, picture bright and clear, exposure works fine however the sound is no better. I have to use my headset/microphone for anybody to hear me on skype and if I use it for video capture the sound is distant, dull and overlaid by a constant succession of clicks and pops.
This is what people report hearing when I talk to them online. The camera is sold as having "unrivalled audio and video fidelity".Video yes (after exchange) audio definately not. I hope I will not have to get the second cam exchanged as if I do I will not be walking out with a Creative product. I have thoroughly checked my settings and carefully read the instructions and forum regarding this and have found no resolve. Anybody out there with the same issue?

I bought the Live! Cam Voice a few days ago and have been suffering from sound problems too when recording. The sound distortion is almost electrical/mechanical in nature but disappears when the video auto-balances and becomes brighter ?!?! IT also disappeared when connected via a USB . hub, although the system then griped that the port wasn't sufficiently fast.
I would consider swapping my main USB cable for the gold plated variety, to ensure no signals are encroaching on the port, but this may be overkill.
These findings would suggest a software issue rather than hardware.
Note. Do not install the voice driver update from Aug 2006, seems to make things noticeably worse!

ISight Capturing Live Video

hi all,
I just got a macbook with a built in isight camera. The isight works fine for photobooth and iMovie. The problem i have is capturing live footage. I'm unable to have a video chat on ichat. Also, i tried using it on ustream.tv. It doesn't work. I changed the settings on the adobe flash player but it still didn't work. So, I think the problem is capturing live video.
please help! It's frustrating me
Thanks,
Labze89

Thanks for clearing that up, Labze89
Based on that info, your iSight can certainly capture live video.
Ustream identifies itself as a beta site, so you should expect to encounter some problems, but you should be able to resolve them.
Good quality streaming video requires broadband speed. More info below on this subject. Contact your ISP if you need to purchase additional speed (bandwidth.)
Streaming live video also involves proper settings for your modem (and router, if you have one). If you have not recently rebooted (shut down for about a minute and then restarted) your modem and router, do so now. Be sure to let the modem's self-test finish before starting the router. Let the router's self-test finish before restarting your Mac. Rebooting sometimes is all that is required. If restarting does not correct your problem, you will need to consider other possibilities.
At least for users in the USA, enabling your router's "UP-n-P" setting is often all the router configuration that is required. However, sometimes manual port configuration is required. If so, the instructions for your router will give you the info on how to check and change the settings. What setting values you must use will come from the service (Ustream or iChat) you want to use.
If you have enabled your Mac's System Preferences > Sharing > Firewall, enabling your router's "UP-n-P" setting may allow you to stream video without additional configuration of your Mac's Firewall. If the problem persist when your Mac's Firewall is set to "On" and your router's (if you use one) UP-n-P setting is enabled, you may need to configure the necessary ports on your router and in your Mac's Firewall. Search "Help" on your Mac or see this link for Mac OS X 10.4 Help: Setting advanced firewall options.
Also, your ISP must not be blocking any ports required by the service you are attempting to use. See the ustream.tv FAQs for help on your ustream.tv problems. For your problem with streaming video, check FAQ #s 9, 7, and 15 first.
To minimize possible conflicts, disconnect all unnecessary A/V peripherals (such as eyeTV, game consoles, iPods, etc.) and quit all other applications while troubleshooting your problem. You can try adding them back one at a time once you can make your streaming work reliably.
If these and the other FAQs do not help you resolve your ustream.tv problems, and if you do not get help from some other Ustream user here, click ustream.tv's Contact Us link for email help directly from the people who determine how the site works. They should be your best source.
<hr width="85%">
If you use dial-up, or if your broadband speed is not fast enough, iChat AV will also have video problems.
The Mac OS X 10.4: iChat AV system requirements show all requirements for using iChat AV. For instance, you will not be able to use iChat's video if you do not have at least 100 Kbps broadband both up and down. You can test your internet service's uplink and downlink speed (bandwidth) at Speedtest.net.
If you need to post back for more iChat AV help, please confirm that your system meets all system requirements and list your uplink and downlink speeds in your response.
Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Unable to Capture - Live Cam Voice - HELP!

Similar Messages

Maybe you are looking for