Unable to capture screenshot of Agentry Client v 7.0.1.207

Once you have logged a user in the Agentry Client application, it is no more possible to capture screenshots of the Agentry client application.
I got an error "Unable to capture screenshot. USB storage may be in use"
However you can take screenshots of other application (Gmail for example) or you can take screenshot of the Agentry client logging page.
This is occurring with Agentry client v 7.0.1.207. It was working before with v6.0.14
Is there a possibility to remove this security feature?
regards.

With the Encrypted DB checked, it is not possible to take screenshots. There is an option in the newest versions of Agentry 6.0 (would need to wait until it is rolled up to SMP) that next to the Encrypted DB option, you can check an option to enable screen share again. I know this was put into around 6.0.42 or 6.0.44. Don't know if or when it will get to SMP.
Stephen

Similar Messages

Agentry client for image capture

HI experts,
image capture field shows disabled take photo option
i had created image capture field but it showing take photo as disabled but its working fine in ipad with same version of agentry client
i had attached the screen shot with it kindly check it and give me some suggestion
Thanks
kavi

Thanks for the reply,
Am using agentry client version 7.0.0.537 , am using samsung galaxy note, in that link my agentry client with version 7.0.0.537 is not there
Thanks
kavi

Unable to capture the D4OSESSION during LOAD testing??

Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
Nats

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

"Unable to capture window image"

if I select a window to be screenshot, I get this error:
Your screen shot can’t be saved.
Unable to capture window image.
(shortcut: cmd-shift-4 and then space)
It seems to be new in Lion. Never had that problem before. And regular screenshots seem to work fine (cmd-shift-3).
Thanks for any help! ~ Kai

Thanks Davide ...
I created com.apple.screencapture.plist with Terminal and restarted the Mac.
The first couple of window screenshots worked on a Chrome browser window (command-shift-4, then space bar). But it did not work on other app's windows (Finder, Carousel).
Then I switched back to Chrome and I didn't work there too anymore. Crazy thing is that now it works on Finder windows. Very very strange.
All this is only true for capturing a whole window content (command-shift-4, then space bar)
~ Kai

No longer able to capture screenshots on iPad Air? (iOS 8.2)

I've tried several hard resets (by holding down Sleep + Home buttons to turn iPad on & off), and I've also tried resetting all device settings - but I'm still unable to capture a screenshot on my iPad Air. The camera doesn't even click/flash or acknowledge the screenshot attempt when I hold down Home + Power as normal, and it doesn't show up in my photos. Also doesn't work when I select the "screenshot" command using AssistiveTouch. (And I've closed all running apps and cleared my history & website data in Safari).
Anyone have any possible solutions - that don't require iTunes? (Laptop is broken so I don't have a way to restore the device via iTunes). iPad has plenty of available data, and I used to be able to take screenshots with no problem. Assuming it's not an iOS/8.2 issue bc it stopped working before I downloaded the update. Help?

Try sliding the words up/down to select the various modes.

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture user comments and responder in RESPOND API

We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
owf_mgr.wf_notification.setattrtext(p_nid,
               'RESULT'          ,
               'APPROVED');
-- This procedure then caused the WF to advance to next step
-- Respond to notification, depends on RESULT setattrtext above
owf_mgr.wf_notification.respond(     p_nid, -- notification id
     p_respond_comment,     -- response_comment
p_responder     );     --responder role
Any help is greatly appreciated.
Thanks,
Raj

If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
Thanks, Vijay

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to Capture Video PE 3.0

I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?

A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt

Unable to capture startup and shutdown event of Photoshop in automation Plugin.

Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.

Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks

Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Unable to capture the excise duties for intra stocktransfer

Dear All,
while doing goods receipt aganist outbound delivery in receiving plant for intracompany(Depo to Depo) unable to capture the excise duties.Please help on this.
Thanks & regards,
Bhargav

Hi Prabhu,
Excise duties are are not picking automatically while doing j1ig
Thanks & Regards,
Vijaybhaskar

Unable to capture screenshot of Agentry Client v 7.0.1.207

Similar Messages

Maybe you are looking for