Unable to capture since installing 10.4.7

Has anyone had any problems with capture video upon installing the latest Tiger? Video begins to capture but halts. Clip is set to capture at least 30 minutes worth and I have plenty of HD space.
Any suggestions?

Yawn . . .
This is a good workaround for curing your camera recognition problem:
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Similar Messages

Unable to burn since installing Blackberry sync/desktop

I have just installed software for my Blackberry Storm and now I can not burn CD's in itunes
any suggestions ?

+"These songs were all purchased by me, but on another computer. Anyway to make these songs work?"+
Being purchased on another computer would not affect it, but being purchased under another account would. Right-click one of the problem songs, Get Info, Summary tab, and look at "Account Name." If it is different than the account you already authorized, then you need to authorize this one too.

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

Lion no longer supports PowerPC apps. If this is Microsoft Office 2008 (Entourage 2008) then you should disable the syncing services. (I don't have Office 2008 installed anymore so I don't know exactly what it's called anymore.) If you have Microsoft Office 2004 or earlier, then it can't be run on Lion at all since Lion removed Rosetta, which is what allowed a PPC app to run on an Intel based Mac.
Also, I believe Microsoft removed sync services from the current Outlook 2011 (which replaces Entourage) so even upgrading to a newer version of Microsoft Office will not get you back that calendar sync feature. Supposedly Microsoft is working on a new syncing system, but I wouldn't hold my breath.

Since installing OS X Mavericks I am unable to open Adobe CS5 software such as Photoshop CS5 etc

Since installing OS X Mavericks I am unable to open Adobe CS5 software such as Photoshop CS5 etc

Check out the Adobe / Mavericks support page > OS Compatibility and FAQs for Mac OS Mavericks (v10.9)

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Since installing the newest version of Firefox 4.0, I am unable to access my work e-mail which uses Lotus Domino Web Access. Can anyone please tell me how to correct this problem?

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

TS1363 since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

Hey there Jantje1,
It sounds like you are unable to launch iTunes and get an error message instead. I would try the troubleshooting outlined in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If it comes down to uninstalling, then re installing iTunes altogether, use this link to download the 64 bit version of iTunes directly.
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Take care,
Sterling

Since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

Force close the mail app and reset your iPad. See if that fixes it.
In order to close the mail app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the mail app and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unable to connect to Airport Extreme since installing Mountain Lion

Unable to connect to Airport Extreme since installing Mountain Lion. If I go to Finder > Shared I can see it listed but then when I go to connect to it won't. I can see it in Airport Utility and connect to the internet but when I try and connect to the base station to use my hard drive / printer it won't connect?
Tech Support tried saying it could be the devices attached don't have an update for them yet but doesn't explain why I can't connect to the base station. In their defence I can see it in airport utility so the base station does work with the OS X
However I've just tried connecting by an ethernet cable and connects fine?

Ok .
Power down the base station (Mine is connected to a 4 way so i down powered base station, printer and hard drive) powered back up and now when I go to finder then look at the shared section I can view my files on the base station.
Hope this helps

HT202157 Since installing latest apple tv update unable to access netflix

Since installing the latest Apple tv update I am unable to access Netflix. Message appears that Netflix is not available at present, please try again later

Hi all, an update: while sending the Apple TV to sleep and waking it did nothing to fix the problem, sending to sleep and then forcing it to restart by disconnecting and reconnecting the power did the trick. When it restarted, it advised me of the new features in the (already installed) update, somethign it did not do when it restarted after the update. It then automatically found and joined my wi-fi network.
So, if you have the same trouble after the update finishes, try powering the Apple TV off and back on.

Unable to capture - Looking for help.

When I try to capture failure manifests itself in a number of ways. First attempts resulted in an Error message that there were dropped frames during last capture. Only a couple of seconds would be captured. Presently (after a couple of days & restarts) when Capture Now is used I get "This operation couild not be completed as there is no video"- eventhough there was an image. When Batch Capture is used a couple of seconds will capture, then stop, search for time code one frame at a time, try to capture again, stop & repeat the process finally resulting in an error message. Device control works fine until capture is initiated. Here is my set up:
RAM: 1GB
LaCie d2 300GB external hard drive connected via Firewire 400
Canon GL1 connected to the LaCie via Firewire 400 to 800.
QuickTime 7.0.4 (has been reinstalled)
History: The LaCie is a new drive. I previously had a LaCie 200GB Drive that crashed. I was able to capture on that drive before upgrades of both QT & FCP several months ago. I hadn't tried to capture since then until just before the crash a couple of weeks ago. In that last attempt to capture the results were the same as I am experiencing on the new drive. I am able to capture using iMovie, but I think that uses the internal hard drive.
Power book G4 (15 Titanium) Mac OS X (10.4.6) Final Cut Pro HD 4.5
Power book G4 (15 Titanium) Mac OS X (10.4.6)
Power book G4 (15 Titanium) Mac OS X (10.4.6)
Power book G4 (15 Titanium) Mac OS X (10.4.6)

I have good news and bad news.
The good news is you should be able to capture just fine.
The bad news is you likely need to purchase PCMCIA firewire card for your powerbook.
Canon cameras are VERY problematic and need to be isolated from any other firewire devices (aka hard drives).
Since all your firewire ports on the computer are on the same bus, the only way to create a second bus is to install a PCMCIA firewire card. Granite Digital, LaCie and others make a one.
If you don't want to invest the ~$80 for the card, unhook the hard drive and plug the camera directly into the computer, set the firewire protocol to Firewire BASIC and capture away.
However, you can not EDIT in this configuration, so you need to move all your files to the external, reconnect them and have at it.
questions?
x

Unable to Capture Video PE 3.0

I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?

A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

Unable to capture IdcService on certain webdav actions like copy-paste

We wrote a simple checkin filter long back for the Dynamix Prefix functionality.
We have written an If Clause to restrict running this for any services other than CHECKIN related ones, by checking the value of IDCService parameter
There is a scenario where users copy files present in one folder in UCM and paste it under another folder (thus creating a new content item altogether), using Webfolders.
In 10g, even this case produced correct Prefix as service name. We used to have "validateStandard" filter used for this activity.
In 11g, due to some complications and changed filters, we started using "preComputeDocName" filter.
In 11g PS3, We are unable to capture IDCService here and hence unable to assign Dynamic Prefix. Any suggestions?
Currently we only fire the code if IdcService contains "CHECKIN_" or "WEBDAV_PUT" or "COLLECTION_COPY"
Regards,
Prateek

Office X is problematic in SL and it's a bit obsolete since it's almost ten years old. Student version of office is relatively inexpensive. BTW, I can't solve your issues, since I moved to Office '04 six years ago.

Unable to capture since installing 10.4.7

Similar Messages

Maybe you are looking for