Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

Similar Messages

Webcam Live - Unable to capture Video when "audio" is on

Unable to capture Video when "audio" is checked.
Error message "Unable to capture Video - check settings for video compressor and Audio compressor". What are these ??
I have Plantronics headset and have tried most "8bit, mono settings"
Capture Video works when audio is not checked.
Am at latest s/w and driver patch levels.
HELP !!!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Issue where the cart is empty when user logs back in

Having issue where the cart is empty when user logs back in
Steps:
1. User logs into the site
2. User selects items and the cart is updated
3. User logs out of their account
4. User exits/closes the browsers
5. User then reopens the browser, navigates to the site, logs in and the cart is empty
My understanding is that the cart should be populated with the previous items since the user did not complete the order.
I have the following settings:
in shoppingcart.properties
persistOrdersForAnonymousUsers=true
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=true
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=true
persistentAnonymousProfiles=true
Anything else that needs to be set?
Edited by: boyd4715 on Feb 6, 2013 11:07 AM

I reset the properties back to their orignal state
in shoppingcart.properties
persistOrdersForAnonymousUsers=false
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=false
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=false
persistentAnonymousProfiles=false
in /atg/userprofiling/ProfileTools.properties
mergeOrder=false;
Observateion:
If an anonymous user comes to the site, adds items to the cart, leaves the site and comes back - the cart is empty - the order repository is not updated
If a user logs into the site, adds items to the cart and then exits the browser (does not log out), comes back to the site, the selected items are in the cart
If a usr logs into the site, adds items to the cart, logs out of the site, exits the browser, comes back to the site, the selected items are not in the cart
An order does not get presisted to the repository until the order is confirmed.
Based on the last item that explains why the user is not seeing any anything in their cart when they log out. If they do not log out, I assume then that the content of their cart is stored in the cookie.
So, now the question is - why is this happening - I am not the original author of the site - just trying to get some things fixed on it.

How to trigger a custom code when user log in?

Hi my friends,
We are using multiple sharepoint sites at work. Users log in with AD accounts, so they dont see any login page.
I need to run a custom code when user login to website. Event receivers do not help at this point. Any suggestions?
thanks in advance

Hi Ahmet,
From your description, my understanding is that you want to trigger some custom code when users log in SharePoint.
As a solution, you could customize a login page for your SharePoint, then you could trigger your code.
You could also use httpmodule to monitor user login. Please refer to this article about how to use httpmodule:
http://sharepoint.stackexchange.com/questions/100976/get-the-current-logged-in-user-in-sharepoint-added-httpmodule
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

User who opened a web interface

Hi all,
I'd like to know if a certain user is using a web interface or a planning layout, but looking in a sytem table and not with a tcode (once I found this table but now I can't remenber the name).
Anyone can help me ?
best regards,
Mirco

Hi all,
I'd like to know if a certain user is using a web interface or a planning layout, but looking in a sytem table and not with a tcode (once I found this table but now I can't remenber the name).
Anyone can help me ?
best regards,
Mirco

Unable to capture in Async Hot Log

Hi,
I am unable to get the changes captured in async hot log mode of operation. Have verified that DB is in archivelog mode and am able to create change tables, but changes in the source table are not getting propagated. Is it due to logs not getting picked up from the proper place.
my change_sources view has empty values in all the fields except source_type, source_description and created.
would appreciate any pointers for what may be missing..or how to go about identifying the problem.
Thanks,
RK

Thank you Patrick. You have helped me before, so thanks again.
I do not have anything else connected to the firewire ports. I have an external hard drive, but I have tried to capture with and without the hard drive attached. I did recently back up using Carbon Copy Cloner to another hard drive, if anyone thinks this may be the issue.
I can't recall the exact error message in FCP (I have deleted the program trying to fix the issue, and focus on the capture problem in Quicktime thinking that if Quicktime and iMovie both don't capture, that the problem is not with FCP, but either with the OS or the back end of QT) I can re-install FCP to give you the exact FCP error message if you would like me too. Ie, if the exact error message is necessary.
Thanks again for your response.

URL getting concatenated when user logged in for first time

Hi
I am sending the below url to the mail as a notification .
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
when the user click on the link ,it should route to the particular page
case 1 when user already logged in, then after clicking of this link it opens new window and shows the particular page correctly
case 2 when user not logged then afetr clicking of this link it asks for user id and pwd which is ok, but the link is getting concatenated like
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz=NavigationTarget=&ROLExyz
then showing the error message that page doesn't exist.
I am usig Escpae URL function to encode the url ( NavigationTarget=&ROLExyz ) when sending the link to the user in mail .
Regards,
Amit

Hi,
your value of the NavigationTarget parameter does not seem correct - why does it start with "ampersand"?
http://<server>:<port>//irj/portal?NavigationTarget=%3ROLExyz
Maybe try to remove the ampersand so that the parameter looks as follows:
http://<server>:<port>//irj/portal?NavigationTarget=ROLExyz
Regards,
Tanja

Finder window opens when user logs in

I apologize if this has been answered previously - I can't find anything on this topic.
Every time a user logs in to one of my eMacs - OS 10.4.10 (whether it be a local or network user) a new finder window opens that displays the users home. I would like this window to stop opening. I've read some responses that say to close the window then log out and the window should be gone when you log back in. That is not the case. I thought this solution my work on my local users but it doesn't work for either type of user.
I'm trying to avoid writing a script to close the window. I'd like the window to just stop opening in the first place. I tried editing the finder.plist file and I can change what the window opens to, but I can't "turn off" the actual opening of the window.
Any suggestions are greatly appreciated!
Thanks!

I do not have anything checked in the login items. This is happening for both local and network accounts. I'm more concerned about this issue for my network users.
I've discovered that the problem seems to have something to do with a script I had running via a login hook. Is there any way to run a script when a network user logs in without adding it to a login hook?
We have a program on our eMacs that resets the computer back t o its original state every time the computer is restarted. For this reason network user profiles are never stored on the eMac they are recreated from the default user template every time a user logs in.
Maybe this extra information will help!
Thanks!

Java dying when user logs off machine

I have developed a class that monitors a MQ queue, I used the active-x bridge to allow distribution to both java and VB developers to use. The application that is to be developed should be running on a machine in the background.
I created a test VB program using the java class and created a "scheduled task" to start on system start up. When I start the machine, the application starts up and runs. Then a user logs into the machine, and application is still running. Then the user logs off the machine, and the program stops.
I have a VB porgram without the java active-x bridge object and that works throughout the login/logout process.
Any thoughts on how I can keep the program running continously, thanks.

Well, I found a solution. If you add the paramater -Xrs to the java command, it will reduce the use OS signals. Thus it will ignore the hook that Windows has.
It turns out this was a bug in version 1.3. For some non-light reading and more info, see http://developer.java.sun.com/developer/bugParade/bugs/4323062.html

Launchd - can it run a script when users log in OR switch?

I'm hoping to find someone who knows all the gory details of launchd. Here's the why and what: I'm trying to coerce Aperture into letting two users on the same computer share the same Aperture Library, both able to import photos and see and use what the other has done. Initially it is no problem, change the permissions so everyone has read/write/execute, put the Library in a common area, and point both person's Aperture at it. The problem is that Aperture changes permissions of things inside the Library as you use it, and especially when one person imports, the other person can't see that stuff.
So I want to run a script whenever someone logs in or becomes the active user by fast user switching; the script will simply change ownership and permissions of the library and everything in it to restore full access.
After days of research and testing, I made a test launchd plist file (this is the configuration file or agent that launchd looks at and runs your script when criteria are met). It sits in /Library/LaunchAgents/, here it is:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.jim.test</string>
<key>LimitLoadToSessionType</key>
<string>LoginWindow</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Scripts/testscript.sh</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/Users/jim/Desktop/test.err</string>
<key>StandardOutPath</key>
<string>/Users/jim/Desktop/test.out</string>
</dict>
</plist>
The actual test script is sitting in /Library/Scripts/:
#!/bin/bash
echo "org.jim.test.plist was run at `date`"
So if the plist is loaded and the script run, the date and time are written in the test.out file on my desktop. This thing runs great when a user logs in. The problem is, it doesn't run when users switch by fast user switching. In reading the documentation, it was vague about this, whether that could be done; I thought it could.
Can anyone help with a way to get the script to run when any user takes control by any means? As an added complication, which I'll worry about later, the script has to run as root because it's the only way to get the ownership and permissions changed.
Thanks,
Jim

BobHarris is the MAN. ACLs seem to have worked. I put the Aperture Library in /Users/Shared/ApertureLibrary, restored the regular permissions as best I could (me as owner, staff as group, 755), pointed each person's Aperture to the library, then proceeded with the ACL magic. First I created a group for my wife and I, called 'aperture', in the Accounts preference pane. That was to simplify the ACLs (one entry instead of 2) and so that other users (son) aren't able to muck it up.
It took one stinking Terminal command (note that 'aperture' at the beginning of the quote is the group, not the program, folder or library):
chmod -R +a "aperture allow list,addfile,search,delete,add_subdirectory,delete_child,file_inherit,directoryinherit" ApertureLibrary.aplibrary
I was unsure whether this list of permissions was necessary or sufficient, but it seems to have worked so far. Both users can access the library. I imported a different picture by each user, and the other user could then see and delete the picture imported by the other. This was not possible before.
Bob, thanks for the great idea. After a little more testing I'll post a complete how-to in the latest "how do we share Aperture" thread, and give you due credit. The bad news is all the launchd fun is over
Jim

Run LabVIEW executable when user logs off

I have a customer request to do this.
My customer has a computer in their plant that I wrote a LabVIEW applicaiton to monitor part of their process. This computer performs other functions in addition to my program. Their IT department has changed their policy that mandates that anybody using this computer has to log in under their own user name and password. Prevoulsy it was just a group user name and password. What this means for me is everytime a new user needs to use the PC they have to log off and log back on. This stops my program.
Is there a way to have a LabVIEW executable keep running when different users log off and log on?
Thanks
Dan

Sounds like you need a service. It may be a complete architecture change, but you could have an executable running as a service and a user interface executable connecting to it (e.g. via TCP/IP). The service itself can't have a UI.
Without using a service there's no way an application can continue running when a user logs off (afaik).
A service is started even if no user logs on.
There's tools like srvany or similar that allow to run an executable as a service.
Daniel
Message Edited by dan_u on 08-18-2009 03:13 PM

Why does a LaunchDaemon stop when user logs out?

Hi,
We have an application that uses an older version of Jetty that I am trying to configure as a LaunchDaemon on OS X 10.7.5
I've created a org.mortbay.jetty.plist and placed this in the /Library/LaunchDaemons, set permission 644 and owner root:wheel. This can be loaded via launchctl and all is happy. I can connect to the server and browse the pages on the server. However, if I log out, the service stops responding and only starts responding when I log in again. It appears to stop jetty and then restart it when I log in.
As this is being run as the root user, I would not have expected a user logout to stop this process. From what I can see there are no per-user overrides for this.
Upgrading Jetty is not currently an option.
Any help/ideas would be appreciated.
Dave
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.mortbay.jetty</string>
        <key>ServiceDescription</key>
        <string>Jetty 5</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict>
            <key>JAVA_HOME</key>
            <string>/Library/Java/Home</string>
        </dict>
        <key>WorkingDirectory</key>
        <string>/usr/local/myApp/Jetty/extra/OSX/</string>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/bin/java</string>
            <string>-Djava.io.tmpdir=/tmp</string>
            <string>-Djetty.port=2000</string>
            <string>-Djetty.home=/usr/local/myApp/Jetty/</string>
            <string>-Djetty.logs=/usr/local/myApp/Jetty/logs/</string>
            <string>-d32</string>
            <string>-jar</string>
            <string>../../start.jar</string>
            <string>/usr/local/myApp/Jetty/jetty.xml</string>
        </array>
        <key>UserName</key>
        <string>root</string>
     <key>StandardErrorPath</key>
     <string>/tmp/launchd_myprogram_stderr.log</string>
     <key>StandardOutPath</key>
     <string>/tmp/launchd_myprogram_stdout.log</string>
      </dict>
</plist>

Thought I had an answer...but no.
Maybe this reference will help: Daemons and Services
Message was edited by: g_wolfman

USER_EXIT - define actions, when user logs on....

Hello,
is there a function module or sth. like this, which is executed, when a user logs on?
For example...If a user logs on, a message should appear on his screen, but only on his one.
Can I define anywhere what happens, if a user logs on?
thx, holger

Do you have any other examples of what you are trying to achieve with this user exit?
I'm not sure I would be hard coding user names in the ABAP code. You will have to keep track of whether they get the message at every login or just once a day, and track if the message is needed again. You will need a Z table and a lock object (ENQUEUE/DEQUEUE). If you give more details of your actual requirements, we could provide you will more details and ideas.
If you want to force the user to change the password, send a list to BASIS with names and days.
USER01 password expires after 30 days
USER02 password expires after 365 days
USER03 password never expires
If you are trying to give a warning to the user...
"Your password expires in 7 days", you could do that too.
Select the records in the user tables (USR*), check the last date of password change, check the validity perdiod (expiration days), and do the math with today's date. If it's less than 10 days from expiring, display a message.

Copy apps using HFM Copy application utility when users logged in.

Hi All
I am using HFM copy application utility to migrate apps across environments. Can we do the same when users are logged in and active? I know that this utility just copies tables from source to destination, but I m not sure if the copy will be successful if some of the tables are being edited.
Thankyou,
Raghu

Hi,
Dont run the HFm Copy appplication utility when apps were in use.Let say you have app1,2,3,4 and you want to move app 1, make sure app 1 is not in use.
if some body is accessing app2 or 3 or 4 you dont want to worry about that while moving app 1.
Thanks,
Mugundhan

Send email when user logs in

Hi,
please help me to send email to dba when a specific user logs in to database.
Best regards
allahmorad

Hi,
create a trigger that call a procedure to send mail
check below trigger
create or replace trigger logon
AFTER LOGON
ON DATABASE
begin
procedure_name;
end;
to send mail from oracle
create or replace
procedure testing_mail
IS
mailhost VARCHAR2(30) := '10.?.5.?';
mail_conn utl_smtp.connection;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
mesg VARCHAR2( 1000 );
BEGIN
mail_conn := utl_smtp.open_connection('10.?.5.?', 25);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'postmaster@mysmtpdomain'||'>' || crlf ||
'Subject: '||'testing mail' || crlf ||
'To: '||'[email protected]'|| crlf ||
'' || crlf || 'Testing mail procedure';
utl_smtp.helo(mail_conn, '10.?.100.?');
utl_smtp.mail(mail_conn, 'postmaster@mysmtpdomain');
utl_smtp.rcpt(mail_conn, '[email protected]');
utl_smtp.data(mail_conn, 'Testing mail procedure');
utl_smtp.quit(mail_conn);
END;
/

Unable to capture trace, when user logs in throuigh Web Interface

Similar Messages

Maybe you are looking for