Unable to capture traffic with Ethanalyzer on N5K-5548

Version - 5.0(2)N2(1)
My understanding is that we need
1) Access-List defined, with statistics configured to get matched traffic onto control plane
2) Access-List applied to an interface, via command "ip port access-group mycap in"
3) ethanalyzer command, ex; "ethanalyzer local interface mgmt capture-filter "net 1.1.1.0/24" (also tried interfaces inbound-hi & inbound-low)
I see matches on the access-list, but not seeing anything captured.
What am I missing?
ip access-list mycap
statistics per-entry
10 permit ip any 1.1.1.0/24
20 permit ip 1.1.1.0/24 any
30 permit ip any any

just fyi.. on a similar sidenote we are going to enchance the capability of capture filter to collect the necessary statistics via the following enhancement
CSCsz99277 - ethanalyzer capture filter broken
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsz99277

Similar Messages

Unable to capture video with MSI StarForce 822 GeForce 3!

I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
This brings me to two questions:
First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
Thanks for your help.
Charles Bergmeier

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

Unable to capture HDV with Sony HDR-FX1 in FCE 4

Hello all,
Been using an HDR-FX1 for a while, shooting mostly DV, and today I began experimenting with HDV. I shot 8 minutes of footage with the camera in HDV mode.
When I setup FCE 4 for Apple Intermediate Codec 1080i60, the capture window doesn't recognize the camera. However, if I set the FX1 to down convert to DV via firewire, FCE recognizes the camera and I'm able to capture.
How do I (or can I) capture HDV into FCE 4 with the FX1? Is there something (a setting perhaps) that I'm missing? Do I need to jump to FC Pro for this?
My system: 1.6 GHz PowerPC G5 (tower), 2 GB RAM, Sony FX1, FCE 4.0, QT 7.3.1
Thanks in advance,
tg

I had a similar issue with iMovie08 import using HDR-HC1... You may want to try this to see if it helps:
1> Close the import app (FCE, in your case)
2> Unplug the FW cable from the camcorder (Most important step)
3> Go into the Sony menu and re-select the HDV settings (explicit HDV, not Auto + Conv off) in the camcorder
4> Re-connect the FW cable, and restart FCE
I use these steps successfully while switching between HDV and DV imports from my camcorder using iMovie 08. Hopefully, this resolves your problem with FCE. Later this weekend, I plan to experiment (for the first time) with FCE HDV import to try and see the export quality difference between FCE and iM08 (which apparently downconverts everything to 540 lines!).

Unable to Capture HDTV with Firewire

I would like to use the Firewire out capability of my LG HDTV and record video into the computer.
I've connected the G5 and tried using iRecord 0.4 and VirtualDVHS. The TV recognizes the 1394 connection and will often tell me it is transfering data, but no application has received any video. The time counter will increment, but the destination file stays at zero size.
I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
I've wondered if buying QuickTime Pro will help, I only hesitate to do this because in the past, as soon as I buy Pro, a new QuickTime comes out and I have to do it agian. I'll buy it if it will help. So, Will it help to have QuickTime Pro?
I am also looking at some of AVCVideo applications in the SDK and wonder of these might be closer to what I want to work with. So, With Firewire, how specific are devices, i.e. do I want the G5 to look like a DVR or something else?
Finally, iMovie seems to expect to see a camera and the video from the TV does not seem to look like a camera (iMovie tells me no camera is connected). Is there a plug in or tool to trick iMovie or add capability to it to act as a DVR? I've downloaded FireWireSDK21 and looked over the applications and some of the source code. Wow, there is a lot to learn to figure out what is going on here.
Thanks! This was posted in another forum for a few weeks with no repsonses, this is the last chance.

Vidi didn't work.
The TV Firewire and Vidi had no compatible modes.
I suspect that iRecord and VirtualDVHS offer the same capability. There is some setting on the Firewire stream that is compatible with none of these programs. Still looking for a solution.
Thanks.

Unable to capture HDV with Sony HVR-V1E camcorder

Has any one else solved this problem?
Thanks
Lawrence Cave

See if this helps.
http://forums.adobe.com/message/4708997#4708997
GLenn

Unable to capture with FCP5

With correct connexions and I-link OK, FCP is unable to capture DV with the
camera either with recorder. I,ve the text (in french) :
"Périphériques suivants sont introuvables
Apple Firewire PAL (720x576) .... "
The capture is OK using a Mc-Book with 10.4.7 OSX , but not with the G5. I ve verify QT is version 7.
All programms have been updated and still the images not captured, but only
the mechanical commands such "play, FFW, stop... "
How can I make the Camcorder, or the DVR recognized with FCP ?
Thanks for an help.

Hey everyone. Thanks for all the troubleshooting. Getting close to identifying the problem.
I brought the deck home with me to try it out on my personal MacBook Pro system. Same problem. the tape would play back, you could control the deck, but it would not import.
David brought up the tape itself, which, logically, I hadn't even thought of. So I threw in a completely different tape and voila! No problems. Was able to control the deck, view the video on my Mac's display (finally!) and yes, capture video to disk.
Just to make sure the deck wasn't being screwy, I tested both the original tape and the other on my personal miniDV camera and yielded the same results. Except when playing back the original, video wouldn't even display on the camera's LCD screen..
In short:
There has to be something funky with this tape that they gave us. We will probably ship it to another post house and see if they can get it to work out on a different deck. When I return to the office, I will try the other tape just to confirm there's nothing wrong with our Mac Pro system there..
Thank you all for you troubleshooting wisdom. I owe you all one.

Can I capture USP traffic with NI-SPY

11-14-07
Can I capture USB traffic with NI-Spy? if so how?
Thanks
TeBlues

Hi TeBlues,
NI-Spy captures return a log of low-level driver calls being made to National Instruments drivers. It does not track the serial data passed along the USB bus. To capture the serial traffic on the USB bus, I would recommend Portmon (if you are using a Windows OS). This program monitors all serial and parallel port activity on a system.
Donovan

Unable to allow traffic from remote office - Cisco RV220W

Hi there,
I have just bought the RV220W Cisco router firewall because my DLINK-1600 got broken and now I am unable to allow access to the machines located behind this router from the machines located at a remote office. Any help would be much appreciated!!
This is the situation:
1. Two remote offices A and B connected by a VPN tunnel (this connection is managed by an external provider and it is properly functioning)
2. IP range A office: 192.168.236.0/24
3. IP range B office: 192.168.237.0/24
4. Office A: CISCO RV220W router/firewall (the one that I´ve just bought as the old dlink has broken). This RV220W is connected to a cisco router (managed by provider) that is the one with the VPN tunnel to the other office. The CISCO router does not do NAT. On the other end (Office B) there is another CISCO router managed by the provider.
5. Everything was working smoothly until our old router/firewall got broken and that is when I bought the rv220w. I have set up the CISCO RV220W at office A and the machines can ping the machines located at office B and can browse the internet, i.e., the traffic going out is OK and in that sense everything works smoothly.
6. The problem is that the machines located at office B cannot access the machines located behind the CISCO RV220W and I know it is a problem of the firewall as if I capture traffic coming from office B, I can see that it is dropped by the CISCO RV220W.
7. I have tried to enable an access rule in the firewall to allow traffic from office B (see picture below) but it does not seem to work. In the field, Send to Local Server (DNAT IP) I have entered the WAN IP of my router (you cannot leave it blank) … this rule does not work at all. I think that is not properly configured but I don´t know how to do it.
8. As you see, the problem is that I don´t know how to set up a rule to allow specific traffic coming from the WAN (traffic from remote office – 192.168.237.0/24) to the LAN at office A - 192.168.236.0/24.
In the old router/firewall I just had to create a rule specifying the source interface (WAN) and network (Office B) and the destination interdace (LANOfficeA) and network (Office A). It does not seem that here I can do the same. i mean, you always have to point to a server ip inside the LAN??
I know it has to be a very easy thing to do but at this moment I am completely stuck. If anyone can give me some advice would be great.
Thanks a lot for your help in advanced!
Eva

Hi Eva, the default inbound policy cannot be changed. It will block all inbound traffic. To my knowledge there is not a way around this. Access rules are the only way to 'poke' a hole through the firewall but as you note, it is for a specific host. Values such as .0 and .255 do not work.
-Tom
Please mark answered for helpful posts

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture HD 1080 video from HDCAM deck using Decklink HD

I have an original decklink HD capture card with SDI I/O. I have a rented Sony HDCAM F500 deck for the weekend. I can not get FCP to digitize even a frame. All my QT, FCP, OSX and Decklink software is up to date and compatible with one another acording to Decklink's website.
The capture tool shows no video input. I am conecting via SDI from the HD output of the deck to the SDI input on the card, the capture settings are set to the HD format I need to work in, 23.98 PsF. I get the error mesage when I select the setting I want: Unable to locate the capture device Blackmagic HDTV 1080. Your system config may have changed or your deck/camera may be disconnected or turned off.
The system will work in SD using the downconvert output of the deck, but this does me no good on this job. I hope someone has experience with this problem and can help because I am out of ideas!

sorry mate, if I was in the office I would try to help troubleshoot this thing, but here at home its a bit pointless.
other than suggesting you check that you really do have an Declink HD card an not the Declink SD card, or th epossiblity the card may be faulty, the best I can offer is to point you to the Decklink forum at the Cow.
http://forums.creativecow.net/cgi-bin/newviewposts.cgi?forumid=124
have you tried to capture any other HD flavour with this card? how about capturing via the downcoverted SD and using the card to upconvert to HD? (this is not a suggested workflow, just trying to ascertain whether the card is working in HD at all)

Unable to capture user comments and responder in RESPOND API

We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
owf_mgr.wf_notification.setattrtext(p_nid,
               'RESULT'          ,
               'APPROVED');
-- This procedure then caused the WF to advance to next step
-- Respond to notification, depends on RESULT setattrtext above
owf_mgr.wf_notification.respond(     p_nid, -- notification id
     p_respond_comment,     -- response_comment
p_responder     );     --responder role
Any help is greatly appreciated.
Thanks,
Raj

If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
Thanks, Vijay

Unable to Capture Video PE 3.0

I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?

A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt

Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

FCP unable to Capture Canon GL2

Hello -
My system is noted below. Final Cut Pro is updated to 6.0.4.
I am unable to capture the video using Canon's GL2 using the current version of FCP. I believe that I have everything configured correctly because I am able to capture audio and video using my father's JVC GR-DV800U video camera. Actually that particular JVC camera seems to work quite well with FCP. But not Canon's GL2. I am able to control camera's Rewind, Fast Forward, Play, etc. So I know that some communication is taking place. However, no picture is present within FCP; no capture either. Instead, I get that dreaded beach ball wheel.
I believe the FCP settings are correct: Under "Audio/Video" settings, the audio is set to MOTU's 424 (for the 2408 MK3); the DV Capture Preset (and the Sequence) is set to "DV NTSC 48 khz"; Video Playback is set for"Digital Cinema Desktop Preview - Main" with the audio playback set (again) to MOTU's 424 card.
I am attempting to capture the video to an external hard disk drive using the Mac Pro's firewire port located in the back of the computer. Again, this all works using my father's JVC video recorder.
*Given the computer setting and operating system, is this a known issue between the FCP and the GL2??* My GL2 is an older video camera. I purchased it quite a few years ago. *It seems like the GL2 may be the culprit. Yes? No?*
I'm very new to FCP. My background is with SONY's Vegas program (currently I'm up to version 8). Been using the Vegas program for years. My Dell Workstation, unfortunately, is old; it definitely is showing signs of aging. So, to make a long story short, I've decided to invest time and money in a Mac Pro (I use it primarily for music sequencing using the Logic Pro program which I love!) Now I want to learn how to use the FCP which I purchased several months ago. Not being able to have FCP communicate with the GL2 is a minor significance for me, though. I'm in no financial place to purchase a new camera at this time. Luckily, I usually record the video using Focus Enhancement's FS4-Pro with the GL2. So I am not totally dependent on having FCP and the GL2 work together. *Thankfully, the FS4-Pro DOES works well with FCP!!* Too bad I didn't use the FS4-Pro today. Wish I did. UGH
Could there be a work around in getting the GL2 to communicate properly with FCP??
Thank you in advance for your thoughtful insights and suggestions.
Regards,
Ted Fiebke

Not all Canon cameras have connection issues, but hanging around this site I've come to recognize their ability to connect in FCP is the most problematic of all the camera brands. If you have a Canon camcorder, and can not get it to connect up with FCP, the following is a way to sort through the issues and get it to work. Some are elegant - some are ugly.
Before we go any farther
• You should be using 'Firewire Basic' as the control protocol. If you aren't, go change it and try again.
• Also, verify that you have a solid installation of Quicktime. You may want to reinstall it using the 'delete receipts' method.
With some confidence that the software installation and camera settings are correct ... the most direct solution is to purchase another, non-Canon device to use as your capturing machine. The (now discontinued) Sony DSR-11 is highly recommended for DV work. A deck will save wear and tear on the camera's lightweight drive mechanism and will allow you to permanently connect a NTSC/PAL monitor for proper viewing. If you are working with HDV, you may have other issues ...
Beyond that, the path you take depends on the model of computer you own.
1. If you have a G5 tower or a MacPro, capture to a second internal drive with only the camera attached. If you need to move material to firewire drive, disconnect the camera. A second internal drive is quite inexpensive these days if you do not already have one.
2. If you have a G5 tower (PCI) MacPro (PCI), G4 powerbook (PCMCIA) or MacBookPro (Expresscard 43) with an available slot, purchase the appropriate firewire card for the slot. Connect your camera to the card and you should be good to go. The new card creates a unique bus and will avoid collisions with the external drives.
3. If you do not have a slot or a second internal drive and you are stuck with the camera, welcome to the camera/drive shuffle.
• shut down and remove the external hard drive(s) from the system
• connect the camera directly to the firewire port of the computer
• start the camera then the computer
• capture to your internal (system) hard drive
• shut down the camera and computer
• disconnect the camera and reconnect the external hard drive(s)
• start hard drive(s) and computer
• move captured files to external hard drive(s)
• edit
If you output back to tape or wish to view your work on an external Video (NTSC or PAL) monitor, you need to set up the camera to use the firewire out as the A/DV converter or VTR - which means reversing the steps:
• copy the file back to the internal drive
• shut everything down
• disconnect the external drive(s)
• connect the camera to the firewire port (and the TV to the camera if needed)
• start the camera then the computer
• play the file.
One caveat here - You may have difficulty getting the file back to tape without dropping frames. Playing files off of the system drive is very demanding and they may have a hard time keeping up.
All in all, if you do not have the option for second bus (i.e. iMacs, eMacs, iBooks, MacBooks) you may want to think about a computer with expandable options next time.
There is the option of capturing using iMovie, but that brings on it's own set of problems and is not recommended.
Good luck.
x

Unable to capture traffic with Ethanalyzer on N5K-5548

Similar Messages

Maybe you are looking for