Unable to capture UCOMM for cancel & Exit
Hi,
From the fbv2 transaction(Invoice Change) invoice change, we need to capture the User Command (SY-UCOMM) for the exit & cancel, but we are not able to find any BTE,Enhancements for capturing that.Kindly let me know if any other solution is possible for capturing the UCOMM value.
Thanks,
Mohan.
I am not sure if I got your question correctly but if you go inside in FBV2 and click on 'exit' button and debug, you can see sy-ucomm (ok-code) as 'END'. It goes to program MF05AFEENJ (main program SAPMF05A).
Similar Messages
-
Unable to capture new KUNNR in Exits from XD01
Hi all,
I am creating a new customer in XD01 and trying to capture the new customer number in an EXIT. Here, the customer number is (internally)automatically generated as a result of which this customer number cannot be captured in the exit. I am using SAPMF02D user exit.
Can somebody kindly give me some idea on how to capture this new customer on saving XD01?
Thanks,
MaxHi Max,
http://help.sap.com/saphelp_46c/helpdata/en/63/ed2c7dd435d1118b3f0060b03ca329/frameset.htm
Re: Customer Master / Vendor master Creation
Re: How to transport Custom Screen Fields from XD01/XD02 screens to KNA1
Re: Customer (FD01,FD02) Enhancement
Hope it helps..
<b>Reward points if useful..</b>
Thanks & Regards
ilesh 24x7 -
Unable to capture - Looking for help.
When I try to capture failure manifests itself in a number of ways. First attempts resulted in an Error message that there were dropped frames during last capture. Only a couple of seconds would be captured. Presently (after a couple of days & restarts) when Capture Now is used I get "This operation couild not be completed as there is no video"- eventhough there was an image. When Batch Capture is used a couple of seconds will capture, then stop, search for time code one frame at a time, try to capture again, stop & repeat the process finally resulting in an error message. Device control works fine until capture is initiated. Here is my set up:
RAM: 1GB
LaCie d2 300GB external hard drive connected via Firewire 400
Canon GL1 connected to the LaCie via Firewire 400 to 800.
QuickTime 7.0.4 (has been reinstalled)
History: The LaCie is a new drive. I previously had a LaCie 200GB Drive that crashed. I was able to capture on that drive before upgrades of both QT & FCP several months ago. I hadn't tried to capture since then until just before the crash a couple of weeks ago. In that last attempt to capture the results were the same as I am experiencing on the new drive. I am able to capture using iMovie, but I think that uses the internal hard drive.
Power book G4 (15 Titanium) Mac OS X (10.4.6) Final Cut Pro HD 4.5
Power book G4 (15 Titanium) Mac OS X (10.4.6)
Power book G4 (15 Titanium) Mac OS X (10.4.6)
Power book G4 (15 Titanium) Mac OS X (10.4.6)I have good news and bad news.
The good news is you should be able to capture just fine.
The bad news is you likely need to purchase PCMCIA firewire card for your powerbook.
Canon cameras are VERY problematic and need to be isolated from any other firewire devices (aka hard drives).
Since all your firewire ports on the computer are on the same bus, the only way to create a second bus is to install a PCMCIA firewire card. Granite Digital, LaCie and others make a one.
If you don't want to invest the ~$80 for the card, unhook the hard drive and plug the camera directly into the computer, set the firewire protocol to Firewire BASIC and capture away.
However, you can not EDIT in this configuration, so you need to move all your files to the external, reconnect them and have at it.
questions?
x -
Unable to capture fault for Invoke actrivity invoking OA Adapter
Hi,
I have invoke activity that invokes oracle applications adapter and i have catch all and catch for process. But when invoke adapter returns exception my catch and catch all doesn't capture the faults. But when i use some other adapter like database adapter then catch captures fault and work normally.
Is it a bug or there are some other way we need to capture the faults in case of oracle applications adapater.
Any suggestion?One more update i tried printing l_http_response.status_code and got 302.
Thanks,
PKV -
Reason for canceling invoices - VF11 - SD
What is the procedure to capture reason for canceling invoices? The requirement is the users want to choose a reason from the given list of reasons (Like... Drop down option) when they cancel invoices.
Hi,
SAP dose not give you standard field for this use. The reason, I believe, that the system do not use billing cancel reason is the different processes followed. There for if you want to manage the reasons (though the process is the same), you can create different cancellation billing types.
I think otherwise you will break SAP Standard.
An alternative could be, if you also cancel the sales order, to manage the reasons there. In the sales order you will find appropriate fields for that.
Regards,
Ido
Please reward if it helps. -
Unable to capture the excise duties for intra stocktransfer
Dear All,
while doing goods receipt aganist outbound delivery in receiving plant for intracompany(Depo to Depo) unable to capture the excise duties.Please help on this.
Thanks & regards,
BhargavHi Prabhu,
Excise duties are are not picking automatically while doing j1ig
Thanks & Regards,
Vijaybhaskar -
I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up? -
Open project was cancelled or application was unable to load database for pathname
My pc is installed with Robohelp 3x. Recently I shifted the
pc from one room to anther. Now when I attempt to open my existing
workable solution, it give me the following message: "Open project
was canceled or application was unable to load database for
<pathname>". Do I need to call for Robohelp technical
support? If yes, can someone provide me the toll free number?
Can someone pls advise?Thanks Peter, managed to get in through the link you've
given. I seriously doubt it has anything gotta do with a corrupted
project. I have 2 working projects last week but they can no longer
be opened this week.
I tried even to created an empty project from scratch. It was
created successfully but when I reopen the project, it shows the
same error message.
Could there have been other possibilities or ways which I can
troubleshoot?
*puzzled* -
Unable to capture Part 2 for exicse materials
Hi
In import Purchase order scenario I am unable to capture part 2 for excise materials
First I have created import PO. Then I did miro where I posted BED,AED,ECS,SECss
After that I did migo and captured part 1
After that while I was capturing part 2 with ref to vendor invoice I m getting an error message as
NO CENVAT AMOUNT TO BE POSTED
NO CENVAT AMOUNT TO BE REVERSED
We are using taxinj
Can u please help me out in solving this issue?
RahulHi,
Once you have entered the needed information about the connection string and container, go to Object Tab and select the objects. then the Start button will enabled.
Another way to reverse engineer is to use ERD component. Refre to the Note 299067.1 in Metalink. -
Unable to capture field values in Master agreement Line Items
I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
collectionbean = lineItemCollection.get(i);
partNum = ""+collectionbean.getPartNumber() ;
Quantity = ""+collectionbean.getQuantity();
throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AMThis will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel -
Unable to capture value inside parameter T_LFBK of FK03 in display mode
Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PMHi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM -
Unable to capture the adf table column sort icons using open script tool
Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.Hi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
} -
Unable to Capture Video PE 3.0
I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?
A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt -
Unable to capture startup and shutdown event of Photoshop in automation Plugin.
Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks -
Unable to Capture - Live Cam Voice - HELP!
Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks GiuseppeThanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe
Maybe you are looking for
-
Satellite - Wireless suddenly stopped working
Hi, here is the situation: - model: Satellite 300D -11V / Windows Vista - wireless has worked perfectly in the past and no update/changes have recently been made - wireless switched on and orange - wireless in house works perfectly on the other lapto
-
Adobe Exchange Panel has a virus...according to symantec endpoint.
I was trying to down load adobe excange panel from the adobe application Manager and this is what I got in return: 1. A high risk notification from the symantec endpoint cloud scanner. and then the email below. I tried to notify your company directly
-
I am having a problem with my iphone 4s connecting to wifi networks and if it does, it keeps dropping network and can remain unconnected for hours.
-
How do I install my old places.sqlite file to get my old bookmarks?
Bought a new computer. Trying to bring in my old bookmarks, so on the old machine, I saved the file: places.sqlite. Trying to install it from a jump drive on the new machine. I tried the restore feature, but that only restores what you save on the ne
-
Hi, I'd like to fill a pdf form with atril. Unfortunatelly it uses so huge fonts, that some of the letters are actually lolling out of the box. Do you have any idea how to change the fontsize? Or any alternatives? Acrobat Reader works fine, but I'd r