Unable to capture while external00 plugged in, vice versa

Ok, so first time i captured to my external harddrive it all went gravy. second time not so. If my external is plugged in, and I go to log and capture, it does not recognize that there is a camera plugged in through the firewire 400. vice versa. if i have my camera plugged in first and go to capture and log and then plug in my external to set the scratch disks, no way jose. starts freesing up and the spin wheel of death starts spinning. Why would this happen? Solution? Let me know. I need to edit!
External Harddrive: LaCie harddisk 750gb, firewire 800
Final Cut 6 Studio 2
MacBook Pro intel core duo 120gb, 2 gb

Marc
I'm not in the States but just as an example, look at these:
http://www.nitroav.com/product/444/
http://www.sonnettech.com/product/fwusbexpresscard34.html
Please make a research. Probably the Macbook Pro forum is a good place to start Searching:
http://discussions.apple.com/search.jspa?objID=f1152&search=Go&q=firewire+expres scard
Good luck!
Alberto

Similar Messages

Unable to Capture Video PE 3.0

I'm using Premier Elements 3.0 and am unable to capture a video from my DV camera. I have reviewed all the instructions that might relate to the problem and have re installed the program. When I go to capture a video, in the top left of the screen indicates "Capture device off line" however I can start and stop my camera with the buttons on the capture screen. The get video button is not active. It will not download. Again if run through the start up instruction with no results. The program use to work fine but I have not used it in a while. Any suggestions?

A couple of questions:
Do you have the 3.0.2 update?
What make/model of camera?
Does Windows give you the "bing-bong" sound, when you have the camera plugged-in via FireWire and you turn it on?
What mode does the camera's manual tell you to set the camera in, for capture?
Good luck,
Hunt

Unable to capture the excise duties for intra stocktransfer

Dear All,
while doing goods receipt aganist outbound delivery in receiving plant for intracompany(Depo to Depo) unable to capture the excise duties.Please help on this.
Thanks & regards,
Bhargav

Hi Prabhu,
Excise duties are are not picking automatically while doing j1ig
Thanks & Regards,
Vijaybhaskar

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

Unable to capture the value of vbrk-vbeln value from VF02

Hi All,
am printing form from VF02 ,,,once i execute the VF02 , and select Billing Document -> Issue Output to option .., my printi program gets triggered ,......,
but in my print program am unable to capture the value of VBRK-VBELN which i have entered in the VF02 tcode..
any other table the value of VBELN is stored???
pls help me out with the alternatives...
thanks
john

Hi Dhiraj
One doubt how the value is populating in the NAST in the Print Program . While debugging i'm getting the Values from NAST but i want to know from where NAST is loading with these data.
Thanks
Bintu

Unable to capture Part 2 for exicse materials

Hi
In import Purchase order scenario I am unable to capture part 2 for excise materials
First I have created import PO. Then I did miro where I posted BED,AED,ECS,SECss
After that I did migo and captured part 1
After that while I was capturing part 2 with ref to vendor invoice I m getting an error message as
NO CENVAT AMOUNT TO BE POSTED
NO CENVAT AMOUNT TO BE REVERSED
We are using taxinj
Can u please help me out in solving this issue?
Rahul

Hi,
Once you have entered the needed information about the connection string and container, go to Object Tab and select the objects. then the Start button will enabled.
Another way to reverse engineer is to use ERD component. Refre to the Note 299067.1 in Metalink.

Unable to capture screen fields in eCATT

Problem description 1 : Unable to capture screen fields in eCATT
Recording using SAP GUI Method.
Problem description 2 :Unable to capture Tab controls while recording
in eCATT using SAP GUI Method.
Thaks for any suggestion you could provide me and once again for your courtesy attention.
Regards,
Eric Monteiro

Hi Phani,
Please try below code:
*data declaration for reading values given by user in the selection screen field.
DATA: BEGIN OF i_tab OCCURS 0.
          INCLUDE STRUCTURE rsselread.
DATA: END OF i_tab.
MOVE: 'LOGSYS' TO i_tab-name,
        'P' TO i_tab-kind. u201CP For parameter
APPEND i_tab.
MOVE: 'GP_SIMVE' TO i_tab-name,
        'P' TO i_tab-kind. u201CCheck if field is Parameter
APPEND i_tab.
*move program name and screen number into local variable.
l_prog = sy-repid. u201C(Try by directly passing program name also)
l_dynnr = sy-dynnr. u201C(Try by directly passing Screen number also)
*calling function module to get the value given by user.
CALL FUNCTION 'RS_SELECTIONSCREEN_READ'
    EXPORTING
      program     = l_prog
      dynnr       = l_dynnr
    TABLES
      fieldvalues = i_tab.
Hope this should slove your issue.
Thanks & Regards,
Gaurav.

Unable To Capture View in MM01

Dear All,
I am unable to capture the 'Accounting' view in MM01.
In recording in SHDB, I find the accounting view cannot be captured.
Please advice.
Regards,
Prosenjit.

Hi Prosenjit,
try to do this it may be help full to you...
while selecting the views in MM01 at the time of recording. If you want to capture Accounting view after selecting required views please press PAGE DOWN button in the key board then select Account view by doing this you can capture the Account view.....
please reward if this helpfull.

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture user comments and responder in RESPOND API

We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
owf_mgr.wf_notification.setattrtext(p_nid,
               'RESULT'          ,
               'APPROVED');
-- This procedure then caused the WF to advance to next step
-- Respond to notification, depends on RESULT setattrtext above
owf_mgr.wf_notification.respond(     p_nid, -- notification id
     p_respond_comment,     -- response_comment
p_responder     );     --responder role
Any help is greatly appreciated.
Thanks,
Raj

If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
Thanks, Vijay

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

Unable to capture startup and shutdown event of Photoshop in automation Plugin.

Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.

Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks

Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Unable to capture while external00 plugged in, vice versa

Similar Messages

Maybe you are looking for