Unable to chage the status of normal correction to confirm successful test
Hello,
I am unable to chage the status of normal correction to confirm successful test in solman. Its shows error:
Not all test transports are imported .
I have imported the test trasnport in to test system successfully but still i am getting this error . I have also checked blogs in SDN but non of them refers to any solutions. But I can see lot of people have faced this issue.
My configuration is fine and no error in application log.
Can any body help me to find the resolution for this problem? answers will be rewarded.
Regards,
Bhavesh
Hello Mark,
Thanks for the update. But non of the above option can resolve m issue because :
1) Note 1352886: is not relavent as I laready have the higher patch level of solution manager for ST comonant( SAPKITL431).
2) I have already gone through this blog this blog talks about the status of maintenance cycle but in my case the maintenance cycle status is fine (in developemnt without release) . So as per process till now i am on the correct status.
I appreciate your updaes but still I am not able to change the status to consolidate. because of error Not all test transports have been imported.
Please let me know if you have any other solutions for this error.
Regards,
Bhavesh
Similar Messages
-
Unable to change the status of a project to approved
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.R4S wrote:
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.Please see these docs.
CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
Thanks,
Hussein -
Confirm Successful Test in Normal Correction (SDMJ)
Hello,
In normal correction (SDMJ) workflow, the action Confirm Successful Test is selected in the Development with Release phase of a project/maintenance cycle. The status of the Change document changes to Consolidated after that, and you then be able to move the cycle to Test phase.
How can we customise the standard workflow so that Confirm Successful Test is selected in the Test phase? This seems to make better sense.
I'd appreciate any help from any one of you who have done some customising to the SDMJ standard workflow. Many thanks in advance for your help.
BR LiHi Li,
I had the same dscussion with my customers more than once, it is hard to understand to perform the action "Confirm Successful Test" before Test phase.
You could add another status to SDMJ (or a copy of SDMJ, for instance ZDMJ) before Consolidated.
But we selected another option, by using test messages during test phase and therefore following SAP standard process. So, a developer confirms successful integration/unit testing after he finished his development/customizing activities in dev by changing the status to consolidated.
If some issues are detected in Test phase, we are using test messages to correct it. But you are right, at the end of test phase there is no additional status which says: all is fine, go ahead and move it to production. Only be checking that all Test messages are finished, the Production transport approver can be sure, all issues have been resolved.
But by adding another status, please consider this: You have to create a copy of SDMJ (ZDMJ). After this, all enhancements and changes to SDMJ delivered by SAP, you have to do manually for your new transaction type ZDMJ, otherwise you will not get the functionality. That's why I'd recommend to use SDMJ as delivered by SAP and also use Test messages during test phase.
Best Regards,
Holger Slomka -
Unable to capture the Citrix network response time using OATS Load testing.
Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?
Hi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
} -
Hello I'm trying to create Apple ID without success for a long time.
And after checking with the bank details are correct with no successIf you choose US as your country while your bank details and credit card or PayPal account are from another country, then you will get an error not related to your details, such as 'the CVV number is incorrect', although it is correct.
-
Charm Status hangs while saving Confirm Successful test
Hi, I'm Unable to set the status to <Confirm successful test>...ChaRM document is hanging without getting saved.
Please let me know what are the possible issues.?
SonelHi,
Can you tell us if your transport imported with error in QAS system?
If yes,then in SCMA you can click on 'Correct import(repair flag)' button. It will give you the list of transports that went in error for all (*) users in QAS or PRD systems. Then you can select the transports one by one and click 'error corrected' button.
After this you can try again to change the status of CD to 'Successfully Tested'.
If No,please check the job log of collector job SM:TMWFLOW_CMSSYSCOL and see if it is running fine.
The production import queue doesn't get updated with QAS transports due to failure of mentioned job,so when you are scheduling import job it may not be getting any transport to import.
Also, if you have 5 system landscape and you are moving the changes to QAS system of N+1 landscape, and because of ChaRM configuration, changes are not yet allowed to go in import queue of N landscape ,then we get such warnings.
Hope this helps. -
Reseting status of normal correction
Hello.
After update up to version ST 20 (SAPKITL430) one more error appear in system. After processing of any activity with normal correction and trying to save this document system resets status of correction to "Created". I have found coresponding SAP Note 919477, but it has't any correction instruction... Can you help me?
Edited by: Dmitry Udot on Sep 25, 2009 11:02 AMHehe... you are right.
First off I think it should be SDMI_ACTIONS not DMI_ACTIONS.
And yes, there should be some more instructions, hehe. Probably delete it (after making a screenshot).
The selected schedule condtion looks strange. Because as for what I can tell it says:
Set User Status to E0001 (new) when user status is not:
consolidated AND NOT productive AND new (consolidated and productive belong to SDMJ not SDMI, new fits to both)
OR
in developement (fits to SDMI and SDMJ)
So whenever you set (SDMI or SDMJ) to "in developement" it will be set back to E0001. Very strange.
Guess you may delete it or at least disable the action.
Regards -
Hi
we have CUCM 8.5.1 , CUPS 8.5.2 and CUCPC 8.5.1.18771 , we are able to login to CUPC but we are unable to get the hardphone status on the like , on phone.There is actually a whole section of the Cisco Unified Presence Deployment Guide dedicated to this topic. You need to create a SIP trunk with special permissions between CUCM and CUP. Have you read through this section and confirmed each part is correctly configured?
If you have, do you see the PUBLISH events in the CCM SDI traces being sent to CUP? Does the CUP server receive this in the SIP Proxy log? If so, what does it say about it? Note that you would need to turn up trace levels on both products to see this level of detail. -
Software Deployment - the status is not correct
Hello everyone,
My company is running SCCM to manage clients and deploy software. I found that almost computers got installed successfully but report and deployment status show not correct information. This is quite weird. Please take a look at screenshot.
Anybody has idea on it?
Le Nhut Minh PwC Vietname Limited.Hi,
Please check software distribution logs to find some useful information.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_AppManageLog
If the status forward successfully, MP_Status.log also need to be examined.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable top convert the status of idoc from 03 to 12
Hi experts,
I am working on idoc scenario on ECC6.0.I am pushing the idoc from R/3 system to PI7.0.I have done all the prerequisites involved to pushing idoc-----
maintain Rfc destinations,maintain port,partner profile,distribution model....
But when i am pushing the reduced idoc from sender it's showing the status 03.when i am running RBDMOIND in se38 still it is not getting converted into 12.
kindly help me how can I convert the status from 03 to 12.
Thanks in advance.
Regards,
Naresh.KHi Naresh
you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
Hope this will solve your Querry
Thanks !!
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points </b>
Regards
Abhishek Agrahari -
Unable to set the status of CSR to "Finished",
Hi Experts,
I have a CSR. It has 8 activities. Each activities are completed. <u><b>Now when i am trying to change the status of the CSR from Followup to Finished.</b></u> its giving error. The Error is <b>"The CSR can not be finished due to open activites".</b>
in the coding: the GUIDS of all the activities are stored in an internal table. Then these GuIDS are checked against the OBJNR, INACT( ' ' ), STATUS(I1005) of the CRM_JEST table. If sy-subrc is zero for each activity then the status will be set to finished.
Coding:
<b>loop at nkeys.
select single * from CRM_JEST where objnr = nkeys-objkey
and inact = ' ' and status = 'I1005'.
if sy-subrc = 0.
"Finished
else.
Exit.
endif.
endloop.</b>
But i found out that, for one activity, the INACT is 'X' (Inactive). Thats why its gving the error.
I checked the status of the activity in UI (IC WEB) , its completed.( the description of the activity is CSR Dispatch). But still not able to set the status of the CSR to Finished.
I need help regarding the above. Please tell me how can i set the status of the CSR to Finished.
ThanksHello,
You can release the Order by the following method:
Go to KO02
Enter the Internal Order name
Go to Control Data Tab
There we have one screen area as Status: there we have one push button(like); click it and from there you can set the staus of the internal order to Released(or you can also change the current status of the internal order)
Please let me know if you I am missing something in my reply.
Thanks,
Anurag Singh Rathore -
Hi,
I am trying to change the status of Internal order from Technically completed to Release. But i am getting an error that ---Status REL is not allowed (order 4564564).
We have created this order and till now zero value is used of actual budget means we not used even single amount till now for this order and we want to change the status of order from Tech to REL again.
Is it possible.
Please suggest.
Regards,
R.Hello,
You can release the Order by the following method:
Go to KO02
Enter the Internal Order name
Go to Control Data Tab
There we have one screen area as Status: there we have one push button(like); click it and from there you can set the staus of the internal order to Released(or you can also change the current status of the internal order)
Please let me know if you I am missing something in my reply.
Thanks,
Anurag Singh Rathore -
Essbase Agent is down in version 11.1.2.1 and unable to change the status
Hi All,
I've installed and configured Hyperion version 11.1.2.1. When i'm trying to add Essbase server in EAS console, it is giving the Network Error (Essbase Agent issue). When i saw the essbase status from User_Projects/EPMSystem1/bin> opmnctl status it is showing Down. Can you pls. help how to change it to Alive ?
Thanks,
PVRHave a look at the following link to view the different methods of starting up essbase - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/ch08s03s10.html
Cheers
John
http://john-goodwin.blogspot.com/ -
I've tried all the troubleshooting options I could find from Mac Support, but none of seems to jive with what is going on here. This has been going on for a week now and since it began the led has turned orange and the battery has charged twice. Now it seems to be a lost cause. Will this be resolved by upgrading to Lion? I currently have Leopard 10.6.8
Hi Christopher,
Doubtful an upgrade would fix a hardware issue. If you are thinking of upgarding to Lion, best to do all necessary maintenance first.
Try Resetting the System Management Controller (SMC)
If that doesn't help try here > Apple Portables: Troubleshooting MagSafe adapters -
Normal Correction document is reset to Created by itself
Dear everyone:
We have configured ChaRM - Solution Manager 4.0 (SP9). The ChaRM works fine on Urgent Correction, but not for Normal Correction. The Status of (Normal) Correction document always reset back to Created. It does not want to stay as 'In development' status.
Here is the step I took to create new change document with a Subject : Normal Correction(maintenance).
I authorized the change document, then I choose Maintenance Cycle (Normal/Periodic Maintenance).
Next document / correction document -> 8000000196, Status: Created. I choose set in Development. - Status of correction document is: In Development
Next step, I choose Create Transport Request - transport request generated for document. Then all the sudden the status of correction Document is back to Created.
And I can not go to any where else....
Would anyone please help me out?
Thank you.
Kind regards,
RudyHi Steven:
There are some actions are the detail -
Action 1: (yellow light) During Creation
detail: (green) check successful
Action 2: (yellow light) Check Consistency:
detail: (green) Check successful
Action 3: (red light) for Copy a Solution Manager Context:
detail: (green) date/time stamp
(green) Processing SOCM_COPY_CONTEXT is started.
(red) Action could not be successfully executed (no processing parameter)
The other one has yellow status, and the processing parameter shown as
--> No container is available, for application name CRM_ORDER, Action profile SDMI_Action
Action 4: (green) set to 'In Development' :
(green) Processing HF_SET_STATUS Is Started
(green) Action successfully completed
Action 5: (green) Create Transport Request:
(green) Processing HF_Execute_Action Is Started
(green) Request ID and Number created
(green) Action successfully completed
As soon as triggered Create transport, then the Document status back to 'Created', and I only have two choices in the action button ... set in Development or Cancel Procedure.
What would cause this issue ?
Thank you in advance.
Kind regards,
Rudy
Maybe you are looking for
-
How to send data using serial Communication
I want to make serial communication using RXTXcomm.jar file.I was written the code.From this I got the list of serial ports avilable on pc but then after when I was tring to send command to machine which is attached to port it didn't gave any reply.
-
Error while Deploying Opaque view
Hi, I have created an opaque view by selecting the New Physical table...option by right clicking on the database schema. I have written a statement by selecting the Table type as SELECT in the Physical Table dialog box as follows, CREATE VIEW <view n
-
I bought yesterday online an Iphone from apple store Canada (http://store.apple.com/ca/browse/home/shop_iphone/family/iphone/iphone4s) and there said that was Unlocked but on my email came a message " IPHONE 4S BLACK 16GB GSM- CAN". Does It means tha
-
Hows is SEQUENCE_NUM derived in the AP_SELECTED_INVOICES_ALL
Hello, Please can you advise how the SEQUENCE_NUM is derived in the AP_SELECTED_INVOICES_ALL table in Payables? The Sequence Number is said to be the order in which Payables pays Supplier Invoices. How does payables decide on the order of payment? I
-
Integrating Ads with a Phonegap App (built in Dreamweaver)
I've created an app with Dreamweaver with jQuery mobile. I've built it with the phonegap integration and it works just fine. Is there any way to integrate any type of ads within it such as Admob? Thanks!