Unable to change AED while posting Part 2

Hi All,
Our client want to change the AED while posting part 2 from 0 to 15 INR, when i try to do it is not allowing me.
can you please help me out.
Regards
Kuber

Hi Abhishek,
Thanks for the answer given...in that case we are facing another problem.
even we cancel the GRN and part1, the entry is not removing from the J1I7 report as Part 1 posted and Part 2 pending.
pls help me in this regard.
Regards,
Kuber

Similar Messages

  • Secondary ECess Not flowing while posting PART 2

    Dear All,
    While capturing and posting excise invoice in MIGO, the Secondary Ecess value is not captured or posted. but BED and ECESS is caputured and posted correctly. I have maintained all the settings including Excise defaults with condition type JA1S against the field AT1 condi. we are using TAXINN procedures.
    Valuble suggestions ll be rewarded.
    regards
    Dhinakar

    HI,
    Check the following config in the SPRO under tax goods movement - India.
    1. Classify Condition Types - The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    2. Excise Accounts per Excise Transaction for GRPO
    3. Specify G/L Accounts per Excise Transaction
    Thanks & Regards,
    Kiran

  • Unable to change password while first logon on windows server 2008 R2 SP1 system

    Hi Team,
    Ad team has created new account for me with change password on first logon setting
    When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
    "You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support" 
    Concern:
    I do not get password change screen on first logon on the server. How should I change my password on first logon?

    Hi,
    I got resolution for above issue
    Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
    RDP Security layer ==> Apply ==> OK

  • Unable  to change NETPR while PO creation using BAPI_PO_CREATE1

    Hi Experts,
    Can someone tell me what are the parameters that are to be passed to the BAPI_PO_CREATE1
    to update NETPR field at item level.
    I am trying to update the 'PBXX' cond type but failed.
    Following is sample piece of code of my code for items.
        t_po_items-po_item = lv_itmno.
        t_po_items-material = wa_outdisp-matnr.
        t_po_items-plant = p_werks.
        t_po_items-quantity = wa_outdisp-menge.
        t_po_items-po_unit = wa_outdisp-meins.
        t_po_items-net_price = wa_outdisp-netpr.
        APPEND t_po_items.
        CLEAR t_po_items.
        t_po_itemsx-po_item = lv_itmno.
        t_po_itemsx-po_itemx = 'X'.
        t_po_itemsx-material = 'X'.
        t_po_itemsx-plant = 'X'.
        t_po_itemsx-quantity = 'X'.
        t_po_itemsx-net_price = 'X'.
        t_po_itemsx-price_unit = 'X'.
        t_po_itemsx-calctype = 'X'.
        APPEND t_po_itemsx.
        CLEAR : t_po_itemsx.
        t_po_itmcon-ITM_NUMBER = lv_itmno.
        t_po_itmcon-COND_ST_NO = '1' .
        t_po_itmcon-cond_COUNT = '2'.
        t_po_itmcon-COND_TYPE = 'PBXX' .
        t_po_itmconx-condorigin = 'A'.
        t_po_itmcon-cond_value = wa_outdisp-netpr.
        t_po_itmconx-condclass = 'B'.
        t_po_itmcon-CURRENCY = 'USD'.
        t_po_itmcon-COND_UNIT = wa_outdisp-meins.
        t_po_itmcon-CHANGE_ID = 'U'.
        APPEND t_po_itmcon.
        t_po_itmconx-ITM_NUMBER = lv_itmno.
        t_po_itmconx-COND_ST_NO = lv_cnt .
        t_po_itmconx-cond_COUNT = 'X'.
        t_po_itmconx-condorigin = 'A'.
        t_po_itmconx-COND_TYPE = 'X' .
        t_po_itmconx-condclass = 'x'.
        t_po_itmconx-cond_value = 'X'.
        t_po_itmconx-CURRENCY = 'X'.
        t_po_itmconx-COND_UNIT = 'X'.
        t_po_itmconx-CHANGE_ID = 'X'.
        APPEND t_po_itmconx.
        CLEAR : t_po_itmconx, wa_outdisp.
      endloop.
    PO header
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = l_po_header
          poheaderx        = l_po_headerx
          NO_PRICE_FROM_PO = 'X'
        IMPORTING
          exppurchaseorder = l_purchaseorder
        TABLES
          return           = t_return
          poitem           = t_po_items
          poitemx          = t_po_itemsx
          pocond           = t_po_itmcon
          pocondx          = t_po_itmconx.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Can some help me.
    Thanks
    Dan

    Hi,
    Ur code is correct i think.
    i used previously like this...
    PARAMETERS: x_test AS CHECKBOX DEFAULT 'X'.
    CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader                     = gw_header
          poheaderx                    = gw_headerx
          testrun                      = x_test
         no_price_from_po              = 'X'
        IMPORTING
          exppurchaseorder             = l_ebeln
        EXPHEADER                    =
        EXPPOEXPIMPHEADER            =
        TABLES
          return                       = gt_return
          poitem                       = gt_poitem
          poitemx                      = gt_poitemx
          poschedule                   = gt_poschedule
          poschedulex                  = gt_poschedulex
          poaccount                    = gt_poaccount
          poaccountx                   = gt_poaccountx
          polimits                     = gt_polimits
          poservices                   = gt_poservices
          posrvaccessvalues            = gt_posrvaccessvalues.
      IF x_test = space.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    use this parameter n try....
    testrun                      = x_test
    Regards,
    Kiran

  • Changing the G/L Account while Posting the Goods Receipts in MIGO

    Hi All,
    I have requirement in which G/L Account needs to be changed based on some validation while Posting the Goods Receipt in MIGO.
    I have created exit in OBBH by copying the standard SAP Program RGGBS800 in view V_T80D.
    I changed following entry in view V_T80D:
    GBLS     ZGGBS800     Val/sub:Exits for substitution
    Now Inside program ZGGBS800, I have written the logic to change the BSEG-HKONT value with the new G/L Account which gets called inside the standard function module G_VSR_SUBSTITUTION_CALL.
    FORM U999.
       DATA : V_HKONT TYPE BSEG-HKONT.
       clear : V_HKONT.
       SELECT SINGLE SAKNR FROM ZMASH1 INTO V_HKONT WHERE MATNR = BSEG-MATNR AND WERKS = BSEG-WERKS.
         IF SY-SUBRC EQ 0.
           BSEG-HKONT = V_HKONT.
         ENDIF.
    ENDFORM.
    After the execution of the above code the value of BSEG-HKONT changes with new value of V_HKONT but after this when I go further in Standard SAP code of function module G_VSR_SUBSTITUTION_CALL, there is one subroutine FORM EXP_TAB_009_BSEG  being called which changes the value of BSEG-HKONT to initial value of HKONT also while moving the data from BSEG to TEMP_STRUCT it doesn't passes the HKONT value, which I want it be passed as I want the changed value to be passed finally to OUT_RESULT. Please look at the code below.
    Following is the SAP standard code of subroutione FORM EXP_TAB_009_BSEG :
    FORM EXP_TAB_009_BSEG
             USING
               IN_ORIG STRUCTURE        BSEG
            CHANGING
               OUT_RESULT STRUCTURE     BSEG
               B_RESULT.
      DATA:  ORIG LIKE BSEG.
      DATA:  BEGIN OF TEMP_STRUCT,
             ABPER                          LIKE   BSEG-ABPER,
             AUGGJ                          LIKE   BSEG-AUGGJ,
             DOCLN                          LIKE   BSEG-DOCLN,
             FIPOS                          LIKE   BSEG-FIPOS,
             FISTL                          LIKE   BSEG-FISTL,
             FKBER                          LIKE   BSEG-FKBER,
             FKBER_LONG                     LIKE   BSEG-FKBER_LONG,
             GEBER                          LIKE   BSEG-GEBER,
             GMVKZ                          LIKE   BSEG-GMVKZ,
             GRANT_NBR                      LIKE   BSEG-GRANT_NBR,
             HKTID                          LIKE   BSEG-HKTID,
             HZUON                          LIKE   BSEG-HZUON,
             INTRENO                        LIKE   BSEG-INTRENO,
             MEASURE                        LIKE   BSEG-MEASURE,
             PARGB                          LIKE   BSEG-PARGB,
             PPA_EX_IND                     LIKE   BSEG-PPA_EX_IND,
             PPRCT                          LIKE   BSEG-PPRCT,
             PRCTR                          LIKE   BSEG-PRCTR,
             PRODPER                        LIKE   BSEG-PRODPER,
             PRZNR                          LIKE   BSEG-PRZNR,
             PSEGMENT                       LIKE   BSEG-PSEGMENT,
             SAMNR                          LIKE   BSEG-SAMNR,
             SCTAX                          LIKE   BSEG-SCTAX,
             SEGMENT                        LIKE   BSEG-SEGMENT,
             SGTXT                          LIKE   BSEG-SGTXT,
             SRTYPE                         LIKE   BSEG-SRTYPE,
             UZAWE                          LIKE   BSEG-UZAWE,
             XREF1                          LIKE   BSEG-XREF1,
             XREF2                          LIKE   BSEG-XREF2,
             XREF3                          LIKE   BSEG-XREF3,
             ZUONR                          LIKE   BSEG-ZUONR,
             ZZBUSPARTN                     LIKE   BSEG-ZZBUSPARTN,
             ZZCHAN                         LIKE   BSEG-ZZCHAN,
             ZZLOB                          LIKE   BSEG-ZZLOB,
             ZZLOCA                         LIKE   BSEG-ZZLOCA,
             ZZPRODUCT                      LIKE   BSEG-ZZPRODUCT,
             ZZREGION                       LIKE   BSEG-ZZREGION,
             ZZSPREG                        LIKE   BSEG-ZZSPREG,
             ZZSTATE                        LIKE   BSEG-ZZSTATE,
             ZZUSERFLD1                     LIKE   BSEG-ZZUSERFLD1,
             ZZUSERFLD2                     LIKE   BSEG-ZZUSERFLD2,
             ZZUSERFLD3                     LIKE   BSEG-ZZUSERFLD3,
             END OF TEMP_STRUCT.
      IF IN_ORIG = BSEG .
        B_RESULT = B_FALSE.
        OUT_RESULT = IN_ORIG.
        EXIT.
      ENDIF.
      MOVE-CORRESPONDING BSEG TO TEMP_STRUCT.
      OUT_RESULT = IN_ORIG.
      MOVE-CORRESPONDING TEMP_STRUCT TO OUT_RESULT.
      IF IN_ORIG = OUT_RESULT .
        B_RESULT = B_FALSE.
      ELSE.
        B_RESULT = B_TRUE.
      ENDIF.
      BSEG = OUT_RESULT.
    ENDFORM.                               " EXP_TAB_009_BSEG
    I need the value of BSEG-HKONT should be passed to OUT_RESULT-HKONT.
    I am not able to find any userexit or BADI for this.
    Please guide me on this.
    Thanks,
    Chandravadan
    Edited by: Chandravadan Jaiswal on May 8, 2009 2:18 PM
    Edited by: Chandravadan Jaiswal on May 8, 2009 3:45 PM

    Hi
    I also need to change hkont while posting MIGO and MIRO transaction..
    Any suggestion for this?
    Here's my problem.. Substitution of account(HKONT) when posting in MIGO/MIRO

  • Error while posting MIRO - PO is changed

    Dear Guru's
    I am getting an error message
    PO is changed
    Message no. ZFI_INWARD_REG026
    while posting the invoice using Miro ..
    I know this custom message  But how to debug /clear this error message. I do checked in the OMRM - Error message is not maintained in that.
    guide me to solve this..
    Regards
    Anandh

    Hi
      I have found the error message under  Enhancement - Classic BADI (impl) - IF_EX_INVOICE_UPDATE~CHANGE_BEFORE_UPDATE method
    IF wa_ti_mrmrseg-ebeln IS NOT INITIAL.
        IF wa_ti_mrmrseg-ebeln NE wa_inward_reg_no-po_number.
          MESSAGE e026(zfi_inward_reg).
        ENDIF.
      ENDIF.
      --- How to find the reason for triggering this message and how to resolve this issue.
    regards
    anand

  • Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

    Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

    Which operating system are you using?
    In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled.

  • G/L a/c and "Only part 1" while posting MIGO

    Dear Gurus,
    I am posting MIGO, while posting I am getting the following error msg:
    1) G/L a/l 300030 does not exit in the chart of account INT , msg no 8i195,
    I have created the account 300030 in FS01, but still I am getting the same error saying account is not maintained in english language.
    Also, what necessary setting have to done to get " only part 1" posting tab when we select ok item and select excise invoice tab.
    Kindly help..
    Regards,
    prashanth pai

    during MIGO if u select from the drop down only part 1 entry... only part 1 will be posted..

  • Unable to move object. Change lists were not part of the same import

    Hi All
    I am facing a strange problem.
    We have applied SP16 patch on our XI box and imported all the scenario objects and design objects which were exported as .tpz file .
    After importing scenario object,all objects moved to a new node 'XI 3.0 Import' in change list and when I tried to activate this change list it gave me an error
    <b>"Unable to move object. Change lists were not part of the same import"</b>
    even if I try to move it Standard change list, it gives me same error.
    Any solution?

    Hi,
    Hope you are activiating the complete change list. You get this error because you trying to activate a part of the change list.
    Please look at the URL:
    Importing to QA box
    Integration Directory (ID)  transport to Prod system
    Regards
    Vijaya

  • HT1918 I have moved from south africa to the US and need to change all my billing details - I'm unable to change the country of residence part?

    I have moved from south africa to the US and need to change all my billing details - I'm unable to change the country of residence part?

    Did you click the "change country or region" link in your account information in the iTunes Store? If not, you need to do that to change your country. Note that you will need a valid US credit card or US iTunes card to enter as payment method.
    Regards.

  • Changes the account assigmnet while posting

    hi
    is it possible to change the the real estate account assign  while posting
    when we do FOSA  last fileld in the output is account assign  , is it possible to change this text .
    Regards

    Hi,
    there is no direct solution for this, but you can achieve this in two ways.,
    1. Create enhancement while RERAPP, update usage type in Refkey2 field (if you are not using this for other purpose)
    or
    2., Just enhance reports FBL3N, FAGLL03. anyway you are getting contract number (RE Key) in these two reports, you can get usage type by adding small coding in enhancement of these reports.
    Pl go through the below link, it will helps you how to enhance reports FBL3N, FAGLL03
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&overridelayout=true
    rgds,
    Srini

  • Error While Posting Vendor Excise Number

    Hello,
    Wrong excise invoice number  (X) was captured while doing MIGO
    In the change mode we have changed the Excise Invoice Number to Y, while posting the Y excise number we are getting the Error 4F 113 ( All Part I entries have been canceled for excise invoice Y 2007)
    Please suggest !
    Regards,
    Kumar

    Hi,
    Once you capture excise invoice in migo u r not supposed to change in J1iex.
    if u made amistake cancel the document and the gr and freshly do

  • Unable to change "Account country"

    Hey there :) I lived in Germany, but I activated the premium-trial in Italy, where I was on holiday, so now it turns out that I can't use my account because on my profile says I'm in the USA and I am unable to change it. I had some email exchange with Spotify but they told me I can resolve my problem on my own, by simply clicking "Change Country" on my profile, but the image attached in this post says it all. I used various accounts in this year, now it could be useful to recover my old account, is there any chance to solve this?  

    Thank you Merik! Do not worry for the late reply, I've created my... 5 account on Spotify (because yes, I switched country -like... in person, not on the web- a lot of time in the last months). Aaand yes!! It's A Perfect Circle's track, 3 Libras it's a part of me and I use it as a pseudonym around the web :) Case number was: 02387098 ... I miss my old account! :)  PS. my country is Italy... for good :) No more Germany/Italy :)  

  • I am unable to change the computer name.

    I am unable to change the computer name of my MBP 9.1.
    When I edit the computer's name in settings/sharing the name reverts to
    the old name of Bill's MBP (2). I am attempting to delete the (2) portion of the name.
    This along with a 27" iMac and a MBP 7.1 are networked wirelessly
    through a older AP extreme. What am I doing wrong?

    I finaly took the MBP to the Apple Store.
    While waiting for the genius, I kept trying to
    change the MBP's name in sharing. After trying
    several things, control-enter worked. I have no idea why.
    The reason I'm posting this is that the genius
    reminded me that I could not be certain the change
    took until I restarted the MBP.  I hadn't seen this
    important step before and some may not be aware of this.
    I suppose this applies to any change made on your Mac.

  • Unable to change voltage

    Hey Guys!
    First post on these forums!
    Well any ways i have the MSI NF750-G55
    The probelm im having is that i am unable to change the voltage for the parts. They are all Grayed out on AUto . My question    is there a way that i can change voltages with this board?
    Thank you. If you need any more info on my PC just tell me

    Quote
    Or enter to enter and value change list.
    Cold, very cold. [too many values, such a long list would take up too much space]
    Quote
    Plus Minus
    Quote
    None worked.
    There are two plus-keys and two minus-keys on a standard keyboard.  None of those four keys worked?

Maybe you are looking for