Unable to change RFC destination in IT Performance reporting wizard

Hi Experts,
I am setting up IT Performance Reporting in my Solman EHP1 system. In the first page of the PErformance reporting wizard, it asked me for RFC destination from BI to Solman(1st field) and Solman to BI (2nd field). I initially entered an existing RFC destination that we are already using in a separate application that has a user with very-limited authorization. Now, I am trying to change the RFC destination by running the same "Configure IT Performance Reporting" wizard but both fields are already GREYED out.
I tried deleting the RFC destination previously defined in an attempt to reenable the fields but only the 2nd field was enabled. When I try to continue the setup, it results into a Shortdump because it is still looking for the initially defined RFC dest which is defined in the 1st field that cannot be edited.
SAP has not yet provided us with a solution.Your help is greatly appreciated.
Thank you very much.

You canprovide the RFC destination in DOE administration portal. Goto Configurations link and search for "BACKEND DESTINATION" parameter in "BACKEND CONFIGURATION" link. Here you can provide RFC destination at SWCV level or at Data object level.
After deleting RFC destination in SM59, it will never take you to backend system.

Similar Messages

Report connection error ORA-12203 : TNS : unable to connect to destination

hi
when in open report and go to query builder then show me this error
REP-0501 : Unable to connect to the specified database.
ORA-12203 : TNS : unable to connect to destination
how i connect report and form with oracle8i which two file in copy into developer folder
please give he solution
thanking your

$ oerr ora 12203
12203, 00000, "TNS:unable to connect to destination"
// *Cause: Invalid address specified or destination is not listening.
// This error can also occur because of underlying network or network
// transport problems.
// *Action: Verify that the net service name you entered was correct.
// Verify that the ADDRESS portion of the connect descriptor which
// corresponds to the net service name is correct. Ensure that the
// destination process (for example the listener) is running at the
// remote node.
$In Developer Home check that TNS alias in tnsnames.ora has no errors. Are you able to connect from Sql*Plus from Developer Home, using same alias ?
Also check that the listener is running on DB machine.
how i connect report and form with oracle8i which two file in copy into developer folder What does it mean exactly ?

RFC Destination was incorrect,send complete BP Data again from CRM to R3

Hello All
Iam facing in issue in CRM - BP Application due to incorrect RFC Destination maintained for SAP R3.
Our CRM Testing system (CRO - Client 300) is connected to R3 Testing System (NCQ - Client 300), but when CRM system went for refresh, RFC Destination was overwritten, and due to that CRM system started pointing to wrong R3 server (NCD - Client 002).
Till we got to know the problem, User had created a BP in CRM and it had flown to incorrect server. later we corrected the RFC Destination , but now the issue is that If I make any small change in CRM BP data, Bdoc is going in error state and message says:
Messages for business partner 0090001677:
No customer is assigned to business partner 4A13ACE0AB356006E10000000A212
Entry 0500 does not exist in - check your entry
I tried to send BP data through middleware tCode /CRMM_Bupa_Send as well, but Bdoc gain got in error state saying :
Entry 0500 does not exist in - check your entry
I think, these errors are coming because system is assuming that it has already sent the data to R3, and it expects certain data to be present in R3 system, which it is unable to find since data for corresponding BP is not present in SAP R3.
I there any way, transaction through which I can send complete BP data from CRM to R3??? Please help.
Edited by: Surbhi Goel on Jun 2, 2009 3:25 PM

Hi Surbhi,
Could you try transaction CRMM_BUPA_MAP in order to see what mapping the system thinks there is (if any). It then allows you to send (same as BUPA_SEND) or retrieve data. I guess this will run into the same error, but it might be worth a try.
Hope this helps.
Sincerely,
KZ

Setting a different rfc destination if code is run on a particular server ?

Hi,
I need to fetch blocked data from GTS server....
I am doing the same using the function module '/SAPSLL/BLCK_DOCS_SD_R3' present in the transaction '/SAPSLL/BL_DOC_SD_R3' ...
Now as per my requirement, i need to fetch data from a different rfc destination if the code is run on a particular server.... ie I need to set the RFC destination in that particular case....
I do not want to copy the whole function group and make changes in the place where the RFC destination is determined.
Is there any other way to get through this. ....
Thanks....

Hello
The RFC destination to the GTS server is determined within fm /SAPSLL/BLCK_DOCS_LS_FETCH_R3:
*------- RFC-Destination Legal Services ermitteln
CALL FUNCTION '/SAPSLL/CD_ALE_RECEIVER_GET_R3'
 IMPORTING
 EV_RFC_DEST = LV_RFC_DEST
 EXCEPTIONS
 NO_RFC_DESTINATION_MAINTAINED = 2
 CUSTOMS_SERVER_NOT_UNIQUE = 4
 OTHERS = 8.
IF NOT ( SY-SUBRC IS INITIAL ) .
 MESSAGE ID SY-MSGID TYPE SY-MSGTY
 NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
 RAISING ERROR_ALE_SETUP.
 EXIT.
ENDIF.
*------- Daten fuer RFC-Aufruf vorbereiten
PERFORM BLOCKED_DOCS_REF_PREPARE USING IV_APP_LEV
 CHANGING CT_DOCUMENT_NUMBER
 LT_OBJECT_DOCUMENT .
*------- Prozessindikator
IF NOT ( IS_OUTPUT-SHWMSG IS INITIAL ) .
 CASE IV_APP_LEV.
 WHEN GC_APPLICATION_LEVEL-SALES_ORDER.
 PERFORM PROGRESS_INDICATOR USING IS_OUTPUT-SHWMSG
 TEXT-M05.
 WHEN GC_APPLICATION_LEVEL-OUTBOUND_DELIVERY.
 PERFORM PROGRESS_INDICATOR USING IS_OUTPUT-SHWMSG
 TEXT-M06.
 WHEN GC_APPLICATION_LEVEL-INVOICE.
 PERFORM PROGRESS_INDICATOR USING IS_OUTPUT-SHWMSG
 TEXT-M07.
 WHEN OTHERS.
*------- Nada
 ENDCASE.
ENDIF.
*------- FB: RFC-Aufruf in Legal Services
CALL FUNCTION '/SAPSLL/LC_BLCK_DOC_SELECT_RFC'
 DESTINATION LV_RFC_DEST
 EXPORTING
Calling fm /SAPSLL/CD_ALE_RECEIVER_GET_R3 the system tries to find the RFC destination from a distribution model (transaction BD64) for
- OBJECT = 'BUS6801'
- METHOD = 'SYNCHRONIZEIFR3'
If we are already on the GTS server I assume that the fetched RFC destination should be 'NONE'.
If you are on another system (<> GTS server) then you should create the appropriate distribution model which allows the system to determine the RFC destination to the GTS server.
Regards
Uwe

RFC Destination Connection Pool requirement

Hi Experts,
I have a custom webdynpro java application to display number of work items pertaining to that particular user in a backend.
There are users who dont use this functionality as well. But the requirement is to place this application in home screen.
I have used both metadata and modeldata with hard coded user since we did not want error messages to appear for users who do not have backend access.
Application & Access Details
Application Location : Home Screen
Concurrent Users : 600 concurrent users maximum possible value
Connection Usage : Close connection immediately using disconnectIfAlive() method.
Now I need to configure JCO Pool Size , Max Connections, Wait Time for the RFC destination.
I have read a lot of post and documents but could not acheive clarity of thought on this.
Kindly let me know what values I should give in these fields for optimal performance and no connection issue for users.
Regards,
Porselvan

Hi Muthavudaiyan,
Hope you are doing good.
Basically from the JCo perspective, there are only 5 parameters that are involved here:
jco.destination.pool_capacity:
Maximum number of connections that are held open in the pool for reuse (default: 1)
jco.destination.peak_limit:
Maximum number of connections that can be obtained from a pool at peak usage times
jco.destination.max_get_client_time:
Maximum time to wait for a free connection if the peak limit is reached before exception is thrown
jco.destination.expiration_time:
Timeout period after which pooled idle connections can be closed (default: 600000ms = 10mins)
jco.destination.expiration_check_period:
Regular time interval for checking if pooled connections have expired and will be closed
The values are determined by the application in question. The ideal values have to told to you by the application developer; there are no two ways about this.
Thank you and have a nice day :).
Kind Regards,
Hemanth

Unable to open RFC connection - Err message

I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
 shared lib "dw_xml.dll" version 43 successfully loaded
 shared lib "dw_xtc.dll" version 43 successfully loaded
 shared lib "dw_stl.dll" version 43 successfully loaded
 shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....

Hi Juan 
I am sending you the log from dev_w0 
 
Thank you a lot, 
Vasil
 
 
 
trc file: "dev_w0", trc level: 1, release: "640" 
 
* 
ACTIVE TRACE LEVEL 1 
ACTIVE TRACE COMPONENTS all, M 
* 
B 
B Mon Jul 27 11:24:53 2009 
B create_con (con_name=R/3) 
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ... 
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded 
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43) 
B New connection 0 created 
M systemid 560 (PC with Windows NT) 
M relno 6400 
M patchlevel 0 
M patchno 43 
M intno 20020600 
M make: multithreaded, Unicode 
M pid 3740 
M 
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160] 
I MtxInit: -2 0 0 
M DpSysAdmExtCreate: ABAP is active 
M DpSysAdmExtCreate: JAVA is not active 
M DpShMCreate: sizeof(wp_adm) 10528 (1316) 
M DpShMCreate: sizeof(tm_adm) 2780232 (13832) 
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) 
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) 
M DpShMCreate: sizeof(comm_adm) 290000 (580) 
M DpShMCreate: sizeof(vmc_adm) 0 (372) 
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) 
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688) 
M DpShMCreate: allocated sys_adm at 060C0040 
M DpShMCreate: allocated wp_adm at 060C1B58 
M DpShMCreate: allocated tm_adm_list at 060C4478 
M DpShMCreate: allocated tm_adm at 060C44A0 
M DpShMCreate: allocated wp_ca_adm at 0636B0E8 
M DpShMCreate: allocated appc_ca_adm at 06370EA8 
M DpShMCreate: allocated comm_adm_list at 06372DE8 
M DpShMCreate: allocated comm_adm at 06372E00 
M DpShMCreate: allocated vmc_adm_list at 063B9AD0 
M DpShMCreate: system runs without vmc_adm 
M DpShMCreate: allocated ca_info at 063B9AF8 
M DpShMCreate: allocated wall_adm at 063B9B00 
X 
X Mon Jul 27 11:24:54 2009 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
M <EsNT> Memory Reset disabled as NT default 
X ES initialized. 
M 
M Mon Jul 27 11:24:55 2009 
M calling db_connect ... 
C Thank You for using the SLOLEDB-interface 
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' 
C dbmssslib.dll patch info 
C patchlevel 0 
C patchno 43 
C patchcomment View with literal containing (0x60) (786638) 
C np:(local) connection used on UPAYWEB1 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Provider Release:9.00.1399.06 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes 
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process. 
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft 
C pn_id:UPAYWEB1_UFTUFT_UFT 
C Not using MARS (on sql 8.0) 
B Connection 0 opened 
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost 
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 
C The IRow interface is supported by this OLEDB provider 
M db_connect o.k. 
I MtxInit: 0 0 0 
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000) 
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200) 
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280) 
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610) 
M SHM_PAGING_ADM (addr: 0F850040, size: 525344) 
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040 
M ThCreateNoBuffer index size: 3000 elems 
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040 
X EmInit: MmSetImplementation( 2 ). 
X <ES> client 0 initializing .... 
X Using implementation flat 
X ES initialized. 
C 
C Mon Jul 27 11:24:58 2009 
C The IRow interface is supported by this OLEDB provider 
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8 
C Using Provider SQLNCLI 
C OpenOledbConnection: MARS property was set successfully. 
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448) 
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 14304000 
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8) 
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1 
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5 
B dbtbxbuf: protect_shm = 0, force_checks = 0 
B dbtbxbuf: tsize_retry = 5047296 
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4] 
B dbtbxbuf: Reading TBX statistics: 
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory). 
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory). 
B dbtbxbuf: 0 object entries precreated 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'. 
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455] 
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ] 
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017 
C DbSlRead - Error 103 (dbcode 208) on open 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
C DbSlRead - Error 103 (dbcode 208) on fetch 
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455> 
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ] 
B db_syinit failed 
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252] 
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901] 
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359] 
M in_ThErrHandle: 1 
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413] 
M 
M Info for wp 0 
M 
M stat = 4 
M reqtype = 1 
M act_reqtype = -1 
M rq_info = 0 
M tid = -1 
M mode = 255 
M len = -1 
M rq_id = 65535 
M rq_source = 255 
M last_tid = 0 
M last_mode = 0 
M int_checked_resource(RFC) = 0 
M ext_checked_resource(RFC) = 0 
M int_checked_resource(HTTP) = 0 
M ext_checked_resource(HTTP) = 0 
M report = > < 
M action = 0 
M tab_name = > < 
M 
M ***************************************************************************** 
M * 
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0) 
M * ERROR tskh_init: ThIPCInit 
M * 
M * TIME Mon Jul 27 11:24:58 2009 
M * RELEASE 640 
M * COMPONENT Taskhandler 
M * VERSION 1 
M * RC 17 
M * MODULE thxxhead.c 
M * LINE 9589 
M * COUNTER 1 
M * 
M ***************************************************************************** 
M 
M PfStatDisconnect: disconnect statistics 
M Entering TH_CALLHOOKS 
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP 
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730] 
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252] 
M Entering ThSetStatError 
M Entering ThReadDetachMode 
M call ThrShutDown (1)... 
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]

No RFC Destination maintained

Hi Experts,
I am doing User Exit for MIGO.
I have done it successfully.but problem comes when the email is sent to the vendor, MIGO is getting DUMP.
So, to cross check i have remove the User Exit of MIGO. but to my surprise when i press POST button in MIGO the similiar DUMP comes.
So wht is the solution for this.
For your Information DUMP message is:
Runtime Errors MESSAGE_TYPE_X
Date and Time 06.12.2007 14:57:55
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "vngsap1"
Network address...... "192.168.0.10"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "VNGSAP1"
Database type..... "MSSQL"
Database name..... "EC6"
Database user ID.. "ec6"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 102
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 21953056
Heap.... 0
Page.... 73728
MM Used. 15443024
MM Free. 1280936
User and Transaction
Client.............. 800
User................ "VEDHRUV"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... " "
Program............. "SAPLMBWL"
Screen.............. "SAPLMIGO 0001"
Screen line......... 18
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
 when a goods movement for an inbound or outbound delivery is posted
30
 directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
 CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
 BKPF as well. There is no other way to forward XBLNR to FI as not
33
 every document is posted by MB_CREATE -> a new function module in
34
 MBWL for transferring the information, called by FI, meant to load
35
 the complete function group for all MBxx postings when this isn't
36
 required (Performance). Would be the better way to transport the
37
 information after switching off MBxx in later release.
38
 corresponding IMPORT ... FROM MEMORY ... can be found in
39
 AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
 MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
MIGO_STATUS
SY-UCOMM
OK_POST1
SY-TITLE
Goods Receipt Purchase Order 4500017132 - shah
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071206
SY-UZEIT
145755
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
6 METHOD SAPLMIGO LMIGOKG1 921
LCL_MIGO_KERNEL=>GOODS_MOVEMENT_POST
5 METHOD SAPLMIGO LMIGOKD1 309
LCL_MIGO_KERNEL=>DOCUMENT_OPERATION
4 METHOD SAPLMIGO LMIGOKD1 9
LCL_MIGO_KERNEL=>DOCUMENT_POST
3 METHOD SAPLMIGO LMIGOST2 124
LCL_MIGO_STATUS=>LIF_MIGO_FRAME~OKCODE_HANDLER
2 METHOD SAPLMIGO LMIGOFR2 172
LCL_MIGO_FRAME=>OKCODE_DISPATCH
1 MODULE (PAI) SAPLMIGO LMIGOPAI 11
PAI_OKCODE_DISPATCH
Chosen variables
Name
Val.
No. 7 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
2222
0000
0000
0000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_3831[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 396
TABH+ 0(20) = 0000000088F26C31000000008C010000F70E0000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04E90400E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x88F26C31
shmId = 0 (0x00000000)
id = 396 (0x8C010000)
label = 3831 (0xF70E0000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x40F26C31
>>>>> 2nd level extension part <<<<<
tabhBack = 0xA0F5EA30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
2222222222
0000000000
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSPR_KEY
00000000
222222222222222222222222222222222222233333333
000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000
SCREEN
GODYNPRO-DETAIL_TAKE
4445455424454445544422222222222222222222222222222222222222222222222222222222222222222222222222
7F49E02FD45419CF41B500000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
5000011865
3333333333
5000011865
0000000000
0000000000
XMKPF-MJAHR
2007
3333
2007
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WE50AMS X XX XXXXXH
3335433445222222222522222222222222225522555554222222
80075501D3000000000800000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 6 Ty. METHOD
Name LCL_MIGO_KERNEL=>GOODS_MOVEMENT_POST
ES_EMKPF_OLD
5000011865200700000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
5000011865200700000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LS_EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
|
| E0001000 |
| 60009000 |
| LS_EMKPF-SUBRC |
| 0 |
| 0000 |
| 0000 |
| C_MOD_ON |
| 1 |
| 3 |
| 1 |
| 0 |
| 0 |
| GOITEM-ERFMG |
| 0.0.0.0.0.0.1. |
| 0001000 |
| 000000C |
| LS_EMKPF-MBLNR |
| |
| 2222222222 |
| 0000000000 |
| 0000000000 |
| 0000000000 |
| SY-XPROG |
| SAPLBPFC |
| 5454454422222222222222222222222222222222 |
| 310C206300000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| SY-REPID |
| SAPLMIGO |
| 5454444422222222222222222222222222222222 |
| 310CD97F00000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| SY-MSGID |
| /SAPSLL/PLUGINR3 |
| 25455442545444532222 |
| F3103CCF0C579E230000 |
| 00000000000000000000 |
| 00000000000000000000 |
| TV_GODEFAULT_TRANSFER-CX |
| <initial> |
| <initial> |
| <initial> |
| SPACE |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| SY-MSGNO |
| 002 |
| 333 |
| 002 |
| 000 |
| 000 |
| SY-MSGV1 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| ES_EMKPF_OLD-MSGV1 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV2 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV3 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV4 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| GODEFAULT_TV |
| 101 GR goods receipt |
| 2222223332245266667276666772222 |
| 000000101007207FF43025359040000 |
| 0000000000000000000000000000000 |
| 0000000000000000000000000000000 |
| LS_EMKPF-MJAHR |
| 0000 |
| 3333 |
| 0000 |
| 0000 |
| 0000 |
| OREF_TIP |
|
D0002000
90006000
TV_GOSPLIT-CURRENT_LINE
<initial>
<initial>
<initial>
No. 5 Ty. METHOD
Name LCL_MIGO_KERNEL=>DOCUMENT_OPERATION
I_SIMULATE
2
0
0
0
I_SIM_VALUES
2
0
0
0
I_ERROR_ONLY
2
0
0
0
E_OK
2
0
0
0
ET_XMSEG
Table[initial]
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
LS_EMKPF
5000011865200700000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
5000011865200700000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LT_EMSEG
Table IT_4407[2x744]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_EMSEG
Table reference: 460
TABH+ 0(20) = F06C0731F83FE73000000000CC01000037110000
TABH+ 20(20) = 02000000E8020000FFFFFFFF0400000040420100
TABH+ 40( 8) = 10000000C1308001
store = 0xF06C0731
ext1 = 0xF83FE730
shmId = 0 (0x00000000)
id = 460 (0xCC010000)
label = 4407 (0x37110000)
fill = 2 (0x02000000)
leng = 744 (0xE8020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001704
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xB8902E31
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3425 (0x610D0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xE0D66931
>>>>> 2nd level extension part <<<<<
tabhBack = 0x00F11C31
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_XMSEG
Table IT_4408[2x2364]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_XMSEG
Table reference: 464
TABH+ 0(20) = A0BEF93070D7693100000000D001000038110000
TABH+ 20(20) = 020000003C090000FFFFFFFF0400000030310100
TABH+ 40( 8) = 04000000C1308401
store = 0xA0BEF930
ext1 = 0x70D76931
shmId = 0 (0x00000000)
id = 464 (0xD0010000)
label = 4408 (0x38110000)
fill = 2 (0x02000000)
leng = 2364 (0x3C090000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001613
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28DF3031
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3511 (0xB70D0000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x28D76931
>>>>> 2nd level extension part <<<<<
tabhBack = 0x90F4EA30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_IMSEG
Table IT_4396[2x2792]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_IMSEG
Table reference: 465
TABH+ 0(20) = D0D5693190D7693100000000D10100002C110000
TABH+ 20(20) = 02000000E80A0000FFFFFFFF04000000E0410100
TABH+ 40( 8) = 04000000C1308001
store = 0xD0D56931
ext1 = 0x90D76931
shmId = 0 (0x00000000)
id = 465 (0xD1010000)
label = 4396 (0x2C110000)
fill = 2 (0x02000000)
leng = 2792 (0xE80A0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001702
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xE01BC930
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3413 (0x550D0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8626B31
collHook = 0x00000000
ext2 = 0x80626B31
>>>>> 2nd level extension part <<<<<
tabhBack = 0xD88C0331
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_CANCEL
Table[initial]
ABAP_TRUE
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
|
| F0000000 |
| 70008000 |
| SYST |
| ######################################T##########################################ÿ##### C#### |
| 0000000000000000000000000000000000000050000000005000000000000000000000000000109000F00050240000 |
| 100010000000000000001000100010000000004000C0B0403000000000000000000000000000B00000F00080030400 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000 |
| 00000000000000000000000000000000000000000000000010000000000000000000000000000000000000D000000C |
| LS_XMKPF |
| 80050000118652007WEWEPR20071206200712062007120614575300000000VEDHRUV |
| 3333333333333333354545533333333333333333333333333333333333333544455522222222222222222222222222 |
| 8005000011865200775750220071206200712062007120614575300000000654825600000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| ME |
|
F0000000
D0002000
%_SPACE
2
0
0
0
L_NO_ITEMS
2
0
0
0
TV_GODEFAULT-CX
<initial>
<initial>
<initial>
LCL_MIGO_GLOBALS=>CALLER_SYTCODE
MIGO
44442222222222222222
D97F0000000000000000
00000000000000000000
00000000000000000000
LCL_MIGO_GLOBALS=>RETAIL_CONSIGNMENT_ACTIVE
2
0
0
0
%_FSREG_001
No. 4 Ty. METHOD
Name LCL_MIGO_KERNEL=>DOCUMENT_POST
E_OK
2
0
0
0
ME
|
| F0000000 |
| D0002000 |
| ABAP_FALSE |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| LCL_MIGO_GLOBALS=>EXTERNAL_CALL_LEAVE_AFTER_POST |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| %_ARCHIVE |
| |
| 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| No. 3 Ty. METHOD |
| Name LCL_MIGO_STATUS=>LIF_MIGO_FRAME~OKCODE_HANDLER |
| I_OKCODE |
| OK_POST1 |
| 4455455322222222222222222222222222222222222222222222222222222222222222 |
| FBF0F34100000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000 |
| OREF_BADI_LOG |
|
D0002000
5000A000
%_FSREG_001
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>KERNEL
|
| F0000000 |
| D0002000 |
| %_VIASELSCR |
| # |
| 0 |
| 4 |
| OREF_DETAIL_BATCH |
|
60009000
0000F000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 2 Ty. METHOD
Name LCL_MIGO_FRAME=>OKCODE_DISPATCH
I_OKCODE
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
L_MSG_STRING
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_OKCODE
OK_POST1
4455455322222222222222222222222222222222222222222222222222222222222222
FBF0F341000000000000000000000000000000000000000000000000000000000

Hi Dhruv Shah,
 Can you please tell me which user exit you are using for doing that. coz i am in need of that.
Thanks,
Ajeeth

RFC destination error while importing a client request

Dear Experts,
We are trying to import a Client Export from our Prd system to Development System and we are unable to import the request as it pops up a RFC destination error.
We have checked the RFC in the Dev QAS and PRD related to TMSADM and all of them are working fine
FYI, We are able to release the transports from the development system and it can be moved till qas and prd . So the TMS Configuration is also good.
The data file and co file in the backend of development is the same size as that of the Prd system.
I am really stuck . Kindly suggest a solution . Please find the screenshots while importing
Regards,
Suratharajan .S

Hi Suratha,
Goto STMS->system overview and select the Communication tab.
Maintained the Instance number of the ASD system.
Once you maintained the instance number , you will able to see it in the RFC ASD.DOMAIN_ASD.
Also distribute the configuration after entering the instance number.
With Regards
Ashutosh Chaturvedi

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

HOw to find out the RFC destination from BW system to ISU

Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
Krishna

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

Creation of RFC destination for SAP-Access Connectivity

Hi,
 I want to create a RFC destination for SAP-Access connectivity.
Can I get some help regarding it's connection type,activation type and gateway options required for the same.
Regrads,
Anthony D'souza

Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME Raj Logical name for connection
DBMS MSS Microsoft SQL Server
USER_NAME <User name> For SQL Server
PASSWORD <password> " "
CON_ENV MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO Availability type for an open database connect
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Raj

Creation of RFC Destination problem

Hi Experts,
I need to establish an RFC communication between TREX7.0 server running on windows 2003 server and the SAPR/3 4.7 EE server running on windows2000.
server. Initially i used TREXAdminTool to create RFC Destination, i was unable to create successfully
Then i used SAPR/3 server from TCODE: SM59, here also am facing the same problem, what are the values i have to give for
1. RFC Destination, 2. Program id 3. Gateway Host and Gateway Service.
PLZ guide me step by step procedure with some example values to create RFC Destination to TREX Server successfully using TREXAdminTool or from SAPR/3 server---SM59
ADV Thanks
Regds
phanikumar

Hi,
Till now i didn't install explicitly any SAP Gateway on TREX server.
I installed TREX server along with SAP Netweaver WEB AS java.
Shall i need to install any SAP Gateway to configure RFC Destination?
If so can you give me the procedure how to install explicitly SAP gateway?
Regds
Phanikumar

BPS retraction RFC destination conversion

Hello everybody,
I m surprised not having met a discussion about RFC destination conversion between systems for BPS retraction?
What is the common recommendation for BPS retraction to have your customizing adapted and to retract to your QUAL R/3 from your QUAL BPS system without having to replicate your customizing with hard coded RFC destination to allow every BPS system to retract to any R/3 system !! Why this does not read the RFC conversion table from BW, probably too easy ?
If you have feed back on this point I would really appreciate , many thanks .
Laurent Allais

Hello Laurent,
I agree, it would be nice if the system would convert the RFC destinations. The functionality is just not there. You can use a single RFC destination for all systems and just have a different server that it is pointing to in SM59.
Or you just make a change in BPS0 after the transport. It's quite common for plan administrators to have access to BPS0.
Regards
Marc
SAP NetWeaver RIG

RFC Destination (ABAP) to use Single Sign on

How do I configure an RFC destination to take the current user-id and connect to the RFC destination system without prompting for logon? (I do not look for a dedicated user-id pwd option - must use the current user's id)
SNC is configured, and when I doubleclick in sap logon pad, I get connected to the corresponding SAP system without the login screen. Specifying the same parameters in the SNC def (SM59 - change destination) doesn't make any difference and returns an RFC error when trying to test.
I have checked SSO links (some) on SAP help site (Do I need to configure the system in SSO2?). From portal and all it works fine. Not sure what specific config is required to connect to ABAP RFC destination to use SSO (or SNC whatever it be) to not throw the login screen.
Any help?
Thanks,

i assume you are talking about to ABAP systems.
check this link, you have to set up trust relationship between the systems.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm">Trust Relationships Between SAP Systems</a>

RFC Destination - Unicode / non - Unicode behavior

Hi All,
In our current production system the RFC destination from R3 to Xi is non-unicode.We have currently 300 Interfaces running using this RFC destination in production.
In few upcoming requirements for some 15 Interfaces some special characters will come from R3 to Xi system.In this case we need a unicode RFC Destination.
I have a query here , can i go ahead and change the existing RFC destination to Unicode or is it suggestible to create a new RFC destination only for these 15 Interfaces?
Need expert advice on this?
<<Text removed>>
Regards,
RK
Edited by: Matt on Oct 5, 2011 9:38 AM

Hello,
The Non-Unicode Single code page systems are supported by SAP for older applications for historical reasons - unicode was not available when they were released. These systems are restricted to only processing characters from their specific code page. This means their can be restrictions if they need to support language combinations that span multiple code pages - basically it is not possible. In addition some languages are not fully available at all for single code page systems like Thai. In addition the Euro symbol is not available.
Unicode is the future for all applications - SAP or otherwise. The significance at the moment is where customers who needs to convert to unicode to support additional business requirements like additional languages. Converting a system, although a simple process is not a trivial process in terms of time and resources.
So u can go ahead and change the existing RFC destination to Unicode .it will not create any prob. for other interfaces which are using non unicode setting.
Regards
Monica

Unable to change RFC destination in IT Performance reporting wizard

Similar Messages

Maybe you are looking for