Unable to change the data in PSA
Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok
Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column
Similar Messages
-
Unable to change the data source of SAP system
Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
PareshHi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue. -
Unable to load the data from PSA to INFOCUBE
Hi BI Experts, good afternoon.
I am loading 3 years data( Full load ) from R/3 to Infocube.
So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
SID 60,758 is smaller than the compress SID of cube ZIC_C03; no request booking.
Please give me the solution how to solve this problem.
Thanks & Regards
AnjaliHi Teja,
Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
Anjali -
Unable to Loda the data into PSA.
Hi Xpert,
i am uanble to load the data into PSA.
my source system is not R/3,it is BI.
(ctually we are xtracting the data (from a cube) with the help of programm to a table and then i am creating a generic data ource on that table and loading the data to my cube.)
i am getting this error message.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Then i replicated the data source and activate ti also then also i am getting this error message.
when i am checking my data source on RSA3 i am getting this error message,
Two internal tables are neither compatible nor convertible.
t happened?
Error in the ABAP Application Program
The current ABAP program "SAPLAQBWEXR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or analysis
You attempted to move one data object to another.
This is not possible here because the internal tables concerned
are neither compatible nor convertible.
gger Location of Runtime Error
Program SAPLAQBWEXR
Include LAQBWEXRU01
Row 419
Module type (FUNCTION)
Module Name AQBW_CALL_EXTRACTOR_QUERY
Regards,
sat534Hi
Problem looks to be with generic datasource
share details of data source and how you created it.
Regards
Sudeep -
Unable to load the data into Cube Using DTP in the quality system
Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
SatyaprasadHi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad -
How to Change the data type of infoobject from NUMC to CHAR
Hi Experts,
I have created an infoobject with data type as NUMC, i used in DSO as a key figure and i have loaded data up to PSA.
Now i want to change the data type of this Info Object from NUMC to CHAR.
Can anyone suggest me the solution for this issue.
Regards,
Venu Gopal.KHi pavan/binu,
I have not loaded data into DSO i just added IO in Key fields and i started editing this IO then im facing error like
1.Master Data Table /BIC/PZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated
2.SID Table /BIC/SZCUSTOMER contains data: Characteristic ZCUSTOMER cannot be activated
Im also unable to edit the P & S tables in SE14.
NOTE:I have data only in PSA and when im trying to load data to DSO Im facing these issues. -
Unable to send the data entered in sap portal
Hi
All
i am trying to configure and test Leave Request from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
Please share your valuable thoughts or solutions.Thanks in advance.
Tanks
Rafi ShaikHi Rafi,
We are also facing similar kind of issue.
When i select type of leave as annual it is giving an error message as
" Parameter missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
Please let us know how you have solved your issue?
Thanks.
-Suresh -
Hi,
Please note we are using SQL Server 2008 for sharepoint. Does it matter for this issue?
Please help.
Thanks.Hi,
According to your post, my understanding is that you failed to open external list.
Please change the External Content’s connection properties’ Authentication Mode to BDC identity.
Then launch the SharePoint 2013 Management Shell and run the PowerShell commands to remove the error.
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69d937e6-f4a3-40e0-b57f-67cddb4ed12e/sharepoint-2013-unable-to-render-the-data-if-the-problem-persists-contact-your-web-server?forum=sharepointcustomization
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi,
I have followed the steps in the following link:
Make an External List from a SQL Azure table with Business Connectivity Services and Secure Store, but I keep receiving the following message when I try to access an external list:
"Unable to render the data. If the problem persists, contact your web server administrator"
Note: I'm using SharePoint 2013 ONLINE, and (as far as I know) I have no access to the logs & powershell.
Any body has had the same issue before?
Regards.
Note: I have tried changing my ECT's connection property (through designer 2013) to BDC Identity, but I keep receiving the following error message:
The metadata object that has Name "xxxx" has a Property with name "AuthenticationMode" and value "RevertToSelf". This value indicates that the runtime should revert to the identity of the application pool, but reverting to the
application pool is not permitted for partitioned service applications.
Saeed Fattahi .NET SpecialistTry changing the External Content’s connection
properties’ Authentication Mode to BDC identity. You will most like get an error (which I have shown below)
Below is an error you will received. Read through
the error carefully.
Launch the SharePoint 2013 Management Shell
and run the below commands
$bcsServiceApp = Get-SPServiceApplication
| where {$_ -match "Business Data Connectivity Service"}
$bcsServiceApp.RevertToSelfAllowed
= $true;
$bcsServiceApp.Update();
This Solved the problem for me. you can try
Sharepoint | TechCenter franklin -
Unable to change the entries in SM30
Hi all,
In my program i am inserting records using MODIFY DBTAB.
COMMIT WORK.
After the prog execution i hv to change the entries in the DBTAB.
I am unable to change the created records.
Can u pls explain me what is happening here?
Thanks in advance
PraveenTo be able to use SM30 to modify any data in a database table you need to have a maintenance dialog generated for that table.
If you have one generated depending on the type of the dialog (maintenance allowed with restrictions) you will still not be able to modify the data.
If you need to change data through SM30 you should either create (or change to maintenance allowed without restrictions) and regenerate the table maintenance dialog. Make sure that the existing dialog doesn't have any customization to it because that will all be lost after regeneration.
The other option to change the data is would be through SE16 and debugger or through a program.
Hope that helps,
Michael -
In iPhoto 11 changing the Date and Time EXIF becomes Garbage?
Hi- the new photo date I choose for a photo (say 1946) turns into garbage after saving - like 1165 or 1492- ( and Columbus would be suprised).
Detail: About 5 years ago in Windows PC in XP folders I scanned old family pics into folder for 1946 and all was well= until few months back in 2011 I crossed over to Mac Book Air and iPhoto 11.
However iphoto doesnt care for file name- Its sorts all in event date based on scan date- exif date- embedded by the scanner when I did it. OK. Smarter.
So to change its date I select each photo in iphoto11- then select "change date" and changed the date what I want it to say (like 06/06/1946) - and saved .
Problem. Now it has two dates against it - one date in year 1492 and the other in 1765- .
I have tried changing the date differently using the little Up or Down arrows, and its scrolls (eventually!) to 1946 -I do a save..... and another crazy date turns up-
Am guessing so its got to be a trick related to the " day counter"- mind you I dont see the pint of telling me that my photo is having its date changed by some quantity of thousands of days- Doh that sounds very Windows like.
I must be doing it wrong.
Any experts please?
Thanks in advance !Thanks AppleMan1958, you're right.
My view was set to Favorites and Unmarked so when I imported the video, rejected parts of it, and THEN changed the date I was unable to see that I wasn't changing the date on the rejected portion. I changed the view to All Clips (in the View menu) and then I could plainly see that the rejected clips still had the current date. -
Changing the data in DataSource in R/3 System for Project System
Can we change the data of DataSource which is extracted from R/3 sYSTEM for Project System Module?
Hello Rajesh,
You can modify it in PSA. Or write the routines or rules logic as per your requirement.
Could you please elaborate more on what kind of changes you are interested for.
San. -
OpenHub - unable to change the extraction mode in DTP
Hi there,
I have an Open Hub that is loaded from two InfoCubes and I need to change the DTPs from both of them.
The problem is that Iu2019m unable to change the extraction mode of both DTPs from Delta to Full in spite of having deleted the Open Hub table. Even I have deleted the requests from the InfoCubes, but itu2019s not working.
What else I have to do to change the extraction mode? Are there any other tables I should delete first?
Thanks!!hi Rocio.
Yes i think u can achieve this using an Init DTP load.
first try to run an Init DTP , Init Without Data Transfer, select it from the Execute tab of processing Mode and then try to run the delta DTP without any load, then successive can be done.
hope this will help u.
thanks -
How many ways to edit the data in PSA?
HI
How many ways to edit the data in PSA? Can we edit both transaction, master data also?Hi.......
Yes yo can edit data in PSA for both Master data and transaction data.......the only diffrence is that in transaction data you have to delete the request from the target before editing......and in master data no need to delete any request....directly edit the PSA........
To edit PSA......the most easiest method has alsredy mentioned ............
But suppose you don't have authorization to edit the data in PSA but still you want to edit then you can follow the process mentioned below..........
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/4f/8d4b38187a8442e10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
Hope this helps.......
Regards,
Debjani...... -
I just did the update for the software on the 8530. This is a new problem since the update. I cannot lose my old entries, so I am unable to sync at all now until Blackberry addresses this bug.
I have read through all of the "fixes" but none of them work.
My Keep Appointments setting has always (and I verified is still) set to "forever"
I went into the advance settings on the MAC desktop software from Blackberry and tried changing the date range to the suggested 14 days past and 365 days future. I even tried changing the past days parameter to "1" in hopes it would simply ignore old entries... It still wants to delete 435 past entries.
I have to keep these.
Help, Blackberry! Your "update" to the software is overriding my settings and has made the sync function unusable.Christina,
Thanks for the reply. I unchecked all calendars in iCal and synced and it still gave me the same notice. So then I went into the iTunes window and checked the sync only certain calendars box (instead of the all calendars box) and left all the calendars unchecked and clicked apply but when I click on sync it automatically reverts to all calendars.
When you say you unchecked all calendars did you mean in iCal? And what did you have your iCal settings at in your iTunes sync window?
I appreciate your help,
Andrea
Maybe you are looking for
-
I erase by mistake my itunes library, then in my trash I foud it and do put it back; but now all the song are in itunes library but they can find any of them. what can I do?
-
10.4.6 causing problem with Dreamweaver?
Hi there, I have recently installed 10.4.6 I also had to reinstall all my software (I had a HD crash..) But now I'm experiencing some odd stuff with DreamweaverMX. It won't display Greek characters in the design view or the code view. It used to do t
-
I have new WD external drive. What must I do before using it. Thanks! Pat
-
Hi, Does anybody know if they still have the 4000 char string limitation in ORACLE 11g?? In other words, is it possible to UPDATE a CLOB field and harcode more than 4000 char in the Update script ? Thanks, Marc.
-
RS232 and PIC16F877A reading problem
Hi, sorry my bad English. I have pic16f877a and labview 7.0. I try to transfer some information(e.g temperature) to my PIC and view that information on LCD-screen. A communication idea is following: Traffic if pic starts communication: 1. PIC send in