Unable to change the operating mode in informatica admin tool.

hi
i have installed Informatica 8.6.0
my repository service is running . and i have also created the integration service but its not running, the reason as i fount out in various blogs is that my repository is iin exclusive mode .
so , i tried to change it to normal mode . but the problem is as i select normal in the drop-down list in general properties operating mode option and click ok , nothing's happening a and the page error is coming as shown below:
Can't move focus to the control because it is invisible ,not enabled or of a type that does not accept the focus
Is this an error of internet explorer ??? i am using IE 7.or are there any options that i need to enable???
what should i do in this case???
plz help !!!!
Edited by: Nikhil.S on Jun 8, 2011 3:37 AM
Edited by: Nikhil.S on Jun 8, 2011 3:41 AM

I got the same error and after I tested with firefox and everything.. I found out the issue (in my case):
- Under Database properties, The value for "ConnectString" property contains a space at the end.
-Example "host.oracle.com "
- Solution: I remove the space at the end , save it, and Now I can modify the operatingmode to Exclusive
Edited by: hcamacho on Jun 24, 2011 1:53 PM

Similar Messages

OpenHub - unable to change the extraction mode in DTP

Hi there,
I have an Open Hub that is loaded from two InfoCubes and I need to change the DTPs from both of them.
The problem is that Iu2019m unable to change the extraction mode of both DTPs from Delta to Full in spite of having deleted the Open Hub table. Even I have deleted the requests from the InfoCubes, but itu2019s not working.
What else I have to do to change the extraction mode? Are there any other tables I should delete first?
Thanks!!

hi Rocio.
Yes i think u can achieve this using an Init DTP load.
first try to run an Init DTP , Init Without Data Transfer, select it from the Execute tab of processing Mode and then try to run the delta DTP without any load, then successive can be done.
hope this will help u.
thanks

Manual Switch over the operation modes

Hi,
What's is purpose of RZ03(Manual Switch Over the Operations Modes)? Where extactly useful?
Regards
Basis Admin

Hi,
Operation Modes are the best way to change the amount of processes in the system, Administrators usually prefer more dialog processes during the day to deal with the users requests and more batch processes during the night to deal with all the system jobs, reports, archiving, etc.. The manual switch is used to change the Operation mode instantly to deal with a special demand, like heavy reporting, special month end jobs, testing, etc...
Hope this help!
Juan
Please reward with points if helpful

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

Unable to retrieve the operations and entities during service introspection

Hi,
 I created one sample flex mobile project using flash builder 4.5, i would like to invoke the web service (wsdl file), which is developed in java and hosted in remote machine server.i want to call a one getEmployeeList method from the webservice.
 In flash builder i used the menu Data->connect to web service , i gave the url, changed the service name and package name, after that i clicked next button,
the service introspection dialog appears and after a few seconds, flash builder 4.5 shows the message "Unable to retrieve the operations and entities from the web service" and "There was an error during service interospection".
 I try to open the url in the browser window i could able to see the wsdl file.so, please help me to solve this issue!
Thanks & Regards,
siva
Message was edited by: siva csc

same problem also on my xampp installation , it worked perfect with REST service in the previous flex 3 release , is it my apache conf or something related on Flash builder
this happens when I call my function that connect to mysql do the query and returns the array object
Err log from Flash Builder 4:
There was an error during service introspection.
 Warning: require_once(Zend/Loader/Autoloader.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in C:\xampp\htdocs\MYAPP\bin-debug\gateway.php on line 23 Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\xampp\php\pear\;C:/xampp/htdocs/ZendFramework/library') in C:\xampp\htdocs\MYAPP\bin-debug\gateway.php on line 23 
thanks in advance
P

In Printer Services box, i get the message "unable to perform the operation"

HP Officejet H470wbt. Using via bluetooth. i have recently installed a new ink service module and a black toner cartridge. Now I get the following message when trying to view ink levels in the printer services area--"unable to perform the operation"

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Changing the Document Mode to IE9

I exported my Captivate project for HTML5, and the project works on my MAC and PC, but when testing it on another co-workers computer using IE9, she was unable to play the project, index.html. When she opened index.html, this is the response she received in her browser,
"The content you are trying to view is not supported in the current Document Mode of Internet Explorer. Change the Document Mode to Internet Explorer 9 Standards and try to view the content again.
To change the Document Mode, press F12, click Document Mode: , and then select Internet Explorer 9 Standards."
Is this something I can change in the CSS document within the project folder?
Any advise would be helpful.

IE9 is not all that HTML5 ready. I would recommend you output for both HTML5 and HTM/SWF when you publish. If you do, you should see a file called Multiscreen.html. Ask your coworker to try that file instead.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

My itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?

my itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?

- Have you tried resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connec the iPod to its syncing computer and try to restore the iPod.
- The if still same. place the iPod in recovery mode and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

EA6900 - Unable to Change to Bridge Mode or Reset router Via Smart Wi-fi

I am unable to change to Bridge mode to do a reset of the router from within the software. There is no option to change it to Bridge. And under Diagnostics, there is no option to Reset. I am trying first and foremost to set the IP scheme to the same as my DSL router. I would rather not put it in Bridge mode. I have tried setting the IP out of the range of the DSL router, and within the same scheme.
It does not work. This is the most current version of the firmware.

Hi Dr. Tek, You can try to reset the router for 30 seconds and power cycle it after. Try to access the Linksys Smart Wi-Fi software again and check if you can change the connection type to bridge mode. You can also use another internet browser to isolate the problem.

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

I changed my Apple ID for an iphone 4s and need to change the iCloud Apple ID/password. I am unable to change the Apple ID under the iCloud account information without the password which no longer exists. How can I update my phone?

I had to change the Apple ID used for my iphone 4s. How do I change the Apple ID for the iCloud information? - the old Apple ID/password no longer exists and this information is requested to make a change. I am unable to change the Apple ID for the iCloud account.

Apple IDs never go away, so it still exists.
But lets be clear. You actually stopped using an Apple ID and created a NEW Apple ID. You didn't just change the email address of your Apple ID? That means that all of the music and apps purchased with the old Apple ID will have to be purchased again.
If you really did create a new Apple ID you will need the password associated with the old one to disable Activation Lock. There is no way around this. As I said, the old one still exists. You can use the standard tools to recover the password at https://appleid.apple.com.

How can I get my installed plugins to show up in Logic after ive installed the plugin discs? ive tried changing the bit mode. it STILL doesn't work.???

I tried installing a program but when i open logic and scan the audio units, it doesnt come up. Even if i change the bit mode, it still doesnt show up. I even tried restarting my machine..Can anyone help me or give me some ideas.
i just wanna get this plugin to work.

Have you confirmed that the plug-in installed to one of the locations where Logic might find it? Most plug-ins go to /Library/Audio/Plug-ins/Components. Some (rarely) install to ~/Library/Audio/Plug-ins/Components (where "~" is your user folder). Look in both locations and see if the plug-in is actually there.
When installing plug-ins, if you are offered options as to what format to install, be sure to include Audio Units. Logic will not see other formats like VST, RTAS, AAX, TDM, etc. If you use other software that recognizes those formats, it's fine to install them too, just be sure you don't deselect Audio Units.
Finally, if you're sure the plug-in is installed to the right place, open the Audio Units Manager in Logic and check to see if the plug-in passed validation. Go to the main menu and choose Logic Pro > Preferences > Audio Units Manager. Check to see if your plug-in is listed there. If there's not a check mark next to it in the "Logic" column, that means it failed validation. If so, the "Compatibilty" column will tell you why. Keep in mind that if the AU is 32-bit, you have to launch Logic in 32-bit mode to see it here. Likewise, 64-bit plug-ins show up in the manager in 64-bit mode.

Unable to change the operating mode in informatica admin tool.

Similar Messages

Maybe you are looking for