Unable to change the permission on PDP, Column 'Title' does not exist.

While changing the permission on PDP, prompts this error continuously, why this happening....
Snapshot is attached
REGARDS DANISH DANIE

Hi,
Is your PDP included in a workflow?
In case it is, please refer to this post:
http://mohantaneja.blogspot.ca/2012/09/column-does-not-exist-it-may-have-been.html
It also might occur if you renamed a column. Then refer to this post:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/be4047a2-3f67-41db-9019-a716c17cee0d/column-does-not-exist?forum=sharepointdevelopmentprevious
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Similar Messages

Problem creating new sites. The formula refers to a column that does not exist

Good morning,
I have a problem creating new sites in my development environment. We have a template which works properly when we create new sites with it. However, when we add one new content type in the site created and save it as a new template, we can't create new sites
with this template. The error log is that there are one problem in one column [The formula refers to a column that does not exist. Check the formula for spelling mistakes or change the non-existing column to an existing column].
I have opened the wsp template with visual studio but I can´t discover what column is the problem because the log only refers to the feature (ListInstances).
Anybody knows how to find my problematic column?
The error is:
Feature Activation: Threw an exception, attempting to roll back. Feature 'plantilla Llave en Mano 20141222 v2ListInstances' (ID: '6c61a3bf-3c51-4064-958b-d154729233e7'). Exception: Microsoft.SharePoint.SPException: La fórmula hace referencia a una
columna que no existe. Compruebe que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. ---> System.Runtime.InteropServices.COMException (0x81020057): La fórmula hace referencia a una columna que no existe. Compruebe
que la fórmula no tiene errores ortográficos o cambie la columna que no existe por otra que exista. at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML) at Microsoft.SharePoint.Library.SPRequest.UpdateField(String
bstrUrl, String bstrListName, String bstrXML) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionListInstances(SPFeaturePropertyCollection props, SPSite site,
SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean
fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
Thanks in advance

Hi Enrique,
According to your description, after added a content type into the new site and save the site as a template, there is an issue when creating another new with the newly
site template.
Based on the error message “The formula refers to a column that does not exist…”, seems that it would be an issue of a Calculated column in the content type you added,
please go through all the Calculated column in that content type to see if the formulas all work well.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

SMC - "The management domain file...does not exist"

Hi All,
Just a quickie to see if anyone has seen this and has any pointers to getting out of it...
Solaris 10 u5 x86. Machine has got SRSS4.0 running on it, the only other modification is CUPS is running in favour of the Solaris lp stuff (got instructions for this off a BigAdmin article).
Anyways, I use SMC to manipulate user/group stuff on the local machine. SMC launches just fine, and I can gather System Information, view logs, disk configuration, processes etc. However, when attempting to do any user/group/role stuff management, I authentication with root role, click on the relevant panel, and get this:
"The management server cannot perform the operation requested.
If this problem persists, refer to the Log Viewer for additional information and contact your Sun Microsystems support provider.
The actual error reported was:
The management domain file:/shadowfire/127 does not exist or cannot be managed on server shadowfire."
The behaviour is consistent. Gee, it was running fine before, AFAIK...
Any pointers to what may have come unstuck gratefully appreciated, as always :)
Dave

I came across the same problem late July almost same day - on a brand new M4000 server with Solaris 10. I use an X-windows client to connect in and open Common Desktop Environment as "root". Then when I invoke SMC it works for everything except trying to open User Maintenance - then I get the error above.
I came across something quite by accident whilst I was being advised to make edits to /etc/hosts (which I dont think made a difference anyway so I wont mention them)
If I use my X-Windows client and open Common Desktop Environment as an ordinary user (say "joe") - then invoke SMC from the menu - when asked by the SMC utility to provide a logon then (as you would) enter the root username and password, guess what ! - I could open the User Maintenance icon without the error appearing and make changes and save them.
Funny how a less privileged user than root invoking CDE seems to provide a basis to get the option to work! I still get the error by using CDE as root
Wanna Try it?

The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint' (are you missing an assembly reference?)

I am trying to compile my SharePoint 2010 solution(VS2010) in VS2013 to deploy in SP2013, i have removed all old 14 ref and added 15 ref for microsoft.SharePoint, office.server and other assemblies.
still i am getting "The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint'
(are you missing an assembly reference?)"
did i miss any step here or any version issue?
any suggestions to resolve
Thanks
S.Venkata Appaji

Hi,
Just confirm that Target Frame work has been changed to 4.5 or not, if not changed it to 4.5 and give it a try. Then also it gives error then check the SP reference, dll properties and check its version(it should be 15.0.).
PS:-You can fine target framework under project properties->Application-> Target Framework.
Regards,
MS

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace

I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.

I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

    I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
    So cross check both of these, in my case the assembly name was fine,
<Action
    Name="Move Item to Another List and Send Email"
    ClassName="MyAssemblyName.Classname"
    Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
    AppliesTo="all"
    Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

OWM says "The directory OH /owm/wallets/oracle" does not exist

Hello, RHEL 6, x86-64
Oracle 11.2.0.4 Ent Edition
I just upgraded the database from 11.2.0.3 to 11.2.0.4. User reports "ORA-28365: wallet is not open" while trying to access tables in a certain schema.
I have little experience with Wallet so I find out that I can "open" the wallet using OWM. I start OWM and follow the instructions in section 9.4.3 of http://docs.oracle.com/cd/B28359_01/network.111/b28530/asowalet.htm#i1006711, and after step 2 which is to select a directory for the wallet, it tells me, ""The directory <OH>/owm/wallets/oracle" does not exist". Ahh! (By the way, this was when I was pointed to the ORIGINAL oracle home (11.2.0.3) because I wanted to see if the wallet existed there.
Now I am moderately panicked. What do I try next? I gotta get the wallet open!
Thank you in advance for taking the time.
Humbly,

Hi,
If you have TDE encrypted objects, one must open the wallet from the sqlplus.
1) make sure the sqlnet.ora from your $ORACLE_HOME/network/admin has ENCRYPTION_WALLET_LOCATION parameter set, example:
ENCRYPTION_WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /home/oracle/wallet)
2) connect as sysdba and run:
alter system set encryption wallet open identified by "wallet_password";
3) select wallet status and path from : select * from v$encryption_wallet;
4) select again from the encrypted objects

System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

Hi,
I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
I have reviewed in central admin. And my custom.masted is active.
some idea?
Patricia

is that a custom solution you deployed ?
look at your site collection master page gallery and verify if you have the master page .
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

ORA-13605: The specified task or object Get does not exist for the current

Dear all,
11.1.0.6 on solaris 10
SQL>
SQL> DECLARE
2 taskname varchar2(100);
3 taskdesc varchar2(128);
4 task_id number;
5 object_id number;
6 timeLimit varchar2(25);
7 numDaysToRetain varchar2(25);
8 objectName varchar2(100);
9 objectType varchar2(100);
10 BEGIN
11 taskname := 'SEGMENTADV_8980096';
12 taskdesc :='Get';
13 numDaysToRetain :='30';
14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
18 END;
19 /
DECLARE
ERROR at line 1:
ORA-13605: The specified task or object Get does not exist for the current
user.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
ORA-06512: at "SYS.DBMS_ADVISOR", line 56
ORA-06512: at line 14
Am running the above as sys user ..
Any idea ?
Kai

Hi,
This link may help:
ORA-13605: The specified task or object ADDM:<task number> does not exist.
Thanks and Regards,
Rajesh K.

The file required for contribute compatibility does not exist on the server

Hi, when connecting to a server in Dreamweaver that is set up
for Contribute I keep getting this message when putting files:
quote:
The file required for contribute compatibility does not exist
on the server. Would you like to turn off Contribute compatibility?
I see the post from jonbradley below, but the solution
suggested doesn't help me:
Does anyone have any idea what this means and how to stop it
from displaying?
Thanks in anticipation...
Simon

Did you search the forum on compatibility?
http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

"Failed to debug the Windows Azure Cloud Service project. The Output directory .... does not exist" - Looking for Solution Config Name Folder?

Good evening,
I've been working on and with a VS2013 Update 2 / Azure SDK 2.3 Cloud Service project for a while now and never had a problem debugging it (setting the .ccproj Project as Startup Project) but at the moment I cannot Debug it anymore - I always get the following
error message:
Failed to debug the Windows Azure Cloud Service project. The output directory 'D:\Workspace\Development\Sources\AzureBackend\csx\Backend - Debug' does not exist.
Now what's odd here, is the last part - the "Backend - Debug" is the Solution configuration name, ALL projects in that particular solution configuration are set to the Debug Configuration. The .ccproj file also only specifies Debug|Any CPU (and
Release|Any CPU respectively) as its output folder(s). Why is the Solution config appearing up there?
And more importantly.. why is this happening and what can I do?!
Thanks,
-Jörg
Ps: there seems to be a related
connect bug and these sorts of issues do appear around the forums but none contains a solution (neither reinstalling the Azure SDK nor cloaking the workspace/re-retrieving & building everything worked).

Good morning Jambor,
I already tried de-installing everything Azure-Tooling related including the Azure SDK, Restarting my machine and re-installing the SDK.
Same result. I can build the .ccproj perfectly fine and the cspack file IS generated perfectly fine, only debugging does not work and there's NO information in the VS output window (again - all projects succeed to build).
I tried explicitely running VS as Administrator, no change. I removed all IIS Express sites (as the ccproj has one web worker role), remapped my local TFS workspace.. nothing helped.
As building works, deploying to Azure Cloud Service (manually and via Publish inside VS) all works -perfectly-, I am pretty sure this IS a bug and I'd LOVE to help to get this fixed. As I said, currently I cannot debug and/or run & test my work, hence
I cannot do ANY work.

Unable to change the permission on PDP, Column 'Title' does not exist.

Similar Messages

Maybe you are looking for