Unable to Check-in from NWDI

Hello,
We have been using NWDI for several years and everything has been fine until the other day. When we right click on an activity from NWDS and check it in, we see the File Uploaded or Skipped messages in the DTR console of NWDI but then the hour glass just spins and NWDS hangs up. We don't see any relevant messages in any of the trace files. We have checked the NWDI_CMSADM password and authorizations and everything seems to be OK. In addition the developer doing the check-in has all the appropriate authorizations and can login to the dtr, cbs, sld and cms etc.
Thanks,
Bert

HI,
May be you can try increasing the memory in Visual Administrator.
Check SAP NOte 830576 if it is applicable to you
Regards,
Satya.
Edited by: Satya on Aug 17, 2009 12:57 PM

Similar Messages

Unable to check update from Software Update??

I have a problem. When I click the Software Update to check new software, it doesn't show anything about new software but I'm sure that I have about 7 to 8 update available. Can u help me to fix this error??
I enclose 2 images about this error:
When I click the Software Update, it showed:
http://img156.imageshack.us/img156/2789/picture3pl3hs5.png
After 2s (2 seconds), it showed:
http://img156.imageshack.us/img156/7799/picture2is3jb2.png
Sorry for my bad English
Message was edited by: Viet Nam

Hello Viet Nam
Welcome to Apple Discussions.
Initially the software update takes longer than normal than in Tiger to check., It may seems like it is stalled but it is working. However in your case it may have failed to establish a connection with the server. Perhaps in Ha Noi, it may be too remote, I don't know.
Check in Software Update that ignore Update has not been enacted for all of the possible updates. To re-enable, select from the menu Software Update: reset Ignored Updates, and then check it again and see if that makes a difference.
If not you can always go to:
http://www.apple.com/support/downloads/
to see if there are any updates relevant to your system.
I know this does not solve your problem, but as you are on 10.5.4 you seem pretty up to date as it is.
There is no need to apologise for your English as it is there are no mistakes at all, except you typed 'u' for 'you'. *U Thant* was the name of a south east asian diplomat you may recall, but it is a lazy way of writing the second person singular in English. Apart from that, I understand you very well.

"Unable to check revocation" error while checking CDP from non-domain user account

Hi!
I use 3-tier PKI infrastructure:
Stand-alone offline Root CA: RootCA;
Stand-alone offline Intermediate subordinate CA: SubCA;
Enterprise CA: EntSubCA.
In certificate we have three CDP point for CRL check:
ldap:///, http:// and file://
I have Windows 2008 R2 server joined to domain.
I use command certutil –verify –urlfetch <filename.cer> >check.txt for revocation checking of certificate.
When I use domain user account for revocation checking, all OK.
I have access to any CDP and all fine.
But when i use local server user account, I haven't access to ldap:/// and process failed although all other links is OK.
My question is "why check fail with non-domain user accout while other CDP point succesfully verifed"?
Here is the logfile from local user:
Issuer:
CN=EntSubCA
DC=DED
DC=ROOT
Subject:
CN=servername.domain_name
Cert Serial Number: 5a896145000300006ee2
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
ChainContext.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
NotBefore: 05.02.2015 20:03
NotAfter: 05.02.2016 20:03
Subject: CN=servername.domain_name
Serial: 5a896145000300006ee2
SubjectAltName: DNS Name=servername.domain_name
Template: Machine
70 e4 6b 16 05 a1 62 e3 6d 24 96 ff 44 74 ee a2 3e ce df 18
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crt
---------------- Certificate CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
Verified "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Base CRL CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
OK "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
OK "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 018d:
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
33 af 4d be 0e 35 45 94 bc 8b 3f d9 c1 60 e7 0c c4 83 17 b6
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[1] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=SubCA
NotBefore: 13.11.2014 19:12
NotAfter: 13.11.2017 19:22
Subject: CN=EntSubCA, DC=DED, DC=ROOT
Serial: 6109015b000100000008
Template: SubCA
9b 04 17 9f c5 fe 52 ca a5 58 49 6c c6 18 fa db 13 b3 92 9e
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: The network path was not found. 0x80070035 (WIN32: 53)
file://\\sub_ca\CertEnroll\sub_ca_SubCA(1).crt
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\SubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/SubCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (32)" Time: 0
[0.0] file://\\ca\crl\SubCA.crl
Verified "Base CRL (32)" Time: 4
[1.0] http://webserver/crl/SubCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 32:
Issuer: CN=SubCA
8d a9 9d 51 65 a3 8e 77 02 22 40 57 62 70 e8 f6 c5 2e 60 1e
CertContext[0][2]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 28.05.2008 12:09
NotAfter: 28.05.2058 12:19
Subject: CN=SubCA
Serial: 616bd19f000100000004
Template: SubCA
06 d2 47 e7 dc 8f a7 97 a2 b8 c3 92 03 19 24 0c 47 45 22 14
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 4
[0.0] http://webserver/crl/RootCA.crl
Verified "Base CRL (1c)" Time: 0
[1.0] file://\\ca\crl\RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
CertContext[0][3]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 27.05.2008 16:10
NotAfter: 27.05.2110 16:20
Subject: CN=RootCA
Serial: 258de6fbd3bbab92460530e9e9f10536
5d e4 56 38 13 0a 52 aa 66 51 25 61 19 33 c9 d7 a2 c7 dd 38
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 0
[0.0] file://\\ca\crl\RootCA.crl
Verified "Base CRL (1c)" Time: 4
[1.0] http://webserver/crl/RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
Issuance[0] = 1.2.700.113556.1.4.7000.233.28688.7.167403.1102261.1593578.2302197.1
Exclude leaf cert:
5b 8d 96 39 f8 a3 6f af f3 89 bc 8d 78 e2 da 53 21 b8 ff aa
Full chain:
ca 99 30 47 9b ad ab ce 97 cc 70 80 a5 4e 11 b3 1a 83 98 78
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.5.5.7.3.1 Server Authentication
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.

What you have discovered is the reason to *not* use LDAP URLs for CDP and AIA extensions in your PKI. To access those URLs, the account must access to the URLs. In your output, it is quite clear that the local account does not have necessary permissions
(you also use FILE URLs for publication, which again is not recommended).
The best practice is to use a single URL for the CDP extension. It should be an HTTP URL that is hosted on a highly available (internally and externally accessible) Web cluster.
For the AIA extension, it should contain two URLs: one for the CA certificate - again to an internally and externally accessible, highly available Web cluster and one for the OCSP service - also
an internally and externally accessible, highly available Web cluster.
the other issue is that the root CA is *not* trusted when run by a non-domain account. How are you adding the trusted root CA. It is recommended to do this by running
certutil -dspublish -f RootCA.crt.
This will ensure that the computer account trusts the root CA. In your output, the root CA certificate is not trusted.
Brian

Why am I unable to post comments from FF. I can do it from IE, but it takes ages. Virus etc. checked.

Two problems:
1. I am unable to post comments from FF, but I can do it from IE,
though it takes ages with IE. Checked for Virus etc. with McAfee,
ZoneAlarm and Spybot. FF versions 4 later changed to 12. Both
do not allow - just keeps waiting (tried up to about 1 hour). It
started about a month ago.
2. I am unable to attach .pdf files from FF in Yahoo Mail. It works
from IE - though it takes ages (script?).
I am using 'NO Script' from FF - but for most cases I have to
go to 'partially allowed' mode.
Thanks
SB

(1) As instructed I went to 'run' and typed in the code. It took me to 'xuowtwd1.default' folder under 'Profiles'. There were several files stored there and
I did not know what to do. Next...
(2). As suggested I went to 'troubleshooting Information' under 'Help' drop down list.
(3). Followed instructions, but could not find the 'Reset Profile' button.
(4). It said the instructions were not for my version (V12) of FF.
(5). Downloaded V. 14.0.1
(6). Will not install. As mentioned earlier I am using Windows 2000 (p.s.initial
complaint)

HT203128 "Unable to check for available downloads. The network connection was lost." I have 3 downloads from yesterday that I receive this error code. Any ideas?

I have 3 downloads from yesterday that I receive this error code. Any ideas?
Thank you!

I may have stumbled upon something that could help. A type of "detour" around the problem.
I just started experiencing this problem a few days ago. Anytime I'd try to download a song/video/movie, I would get the message, "Unable to check for available downloads. The network connection was reset".
So, instead of selecting "Check for Available Downloads" under "Advanced" menu...
I logged into "My Account" page in itunes. If there are available downloads it comes up at the top of the page with the option button "Download Now". When I select that -- it downloads immediately.
Can't promise it will work every time. But it's worked for me so far. Good luck...

My texts are being sent from icloud. I went to messages and uncheck all, but unable to check the phone number. can someone help?

My friends tell me that my texts to them say they are coming from icloud.
After reading how to fix it, I went to settings, messages, send and recieve and unclick everything
but was unable to check/click off the phone number. I was able to check off my email. Am I doing something
wrong?

Hello Frankie Bagels,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Have a nice day,
Mario

Unable to view Imported DC from NWDI in the webdynpro explorer view

Hello,
I am facing problem with NWDS version 2.0.22. we are upgradeing EP04 SPS 14 to sps 22. When I import a DC project from NWDI from inactive view of development configuration perspective I cannot see the created DC's in Webdynpro Explorer view of webdynpro perspective but it is showing in Navigator view.
Also when I create Webdynpro Project or Webdynpro DC locally I was able to see it in Webdynpro Explorer view.
Can any one please tell me why I was not able to view imported Webdynpro DC's that I create from Inactive view of Development Configurations perspective (selected DC in inactive view and right click and create project).
Also when I compared the Folder structure in the Navigator view of Webdynpro perspective.   I found below folders structure differences.
Imported DC from Inactive View of Development configurations
Folders:
cfg, def, gen, Model Folder (and sub-forders), src(and sub-forders), test.
Files:
.dcdef and .project
Locally created DC (which is visible in the Webdynpro Explorer view)
Folders:
bin, cfg, def, gen, gen_ddic(and sub-forders), gen_wdp(and sub-forders), lib, META-INF, Model Folder, src(and sub-forders), test.
Files:
.classpath
.dcdef
.project.
Thanks

Hi Experts,
I get below error when I create project.
com.sap.tc.devconf.SyncException: Failed to sync DC "xx.com/xxdcnamexx(xx.com_xx_1)" in configuration "xx_D". File "C:\Documents and Settings\Administrator\.dtc\0\DCs\xx.com\dcname\_comp\.dcdef" does not exist locally after sync but it exists on the server
     at com.sap.tc.devconf.impl.DCProxy.syncSources(DCProxy.java:916)
     at com.sap.tc.devconf.impl.DCProxy.syncAsSources(DCProxy.java:744)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.syncAsSources(DevelopmentConfiguration.java:4964)
     at com.sap.tc.devconf.impl.DevelopmentComponentNode.syncAsSources(DevelopmentComponentNode.java:955)
     at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.syncSelectedDCs(DcCreateProjectAction.java:443)
     at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:237)
     at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)

Secured websites check antivirus from ipad to get connected and unable to find the required in itfo from ipad2. how to solve

Secured webites check antivirus from ipad or its browser safari to get connected . any one has solution for this issue?

SirThanks for the reply but still i feel something can be done. i am talking about remote connec to
office server wherein we have login id and password . while inputing that the website checks the browser of
ipad2 and asking us to install antivirus to proceed further. if ipad2 is so secure ( yes it should be so secured)
then whey don't it handsake with the website properly and allow us to proceed.
is it possible to throw more light on this tks

There's something wrong with my device. Unable to check updates and couldn't download or install any application from the AppStore .please advice me how to solve this problem .

unable to check updates and couldnt download or install any application

Hi, mayca07.
Thank you for visiting Apple Support Communities.
I would need more information regarding the exact issue or errors received to provide a better answer. However, there are a couple things that I would recommend trying. Try forcing all open applications to close and restart the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

Error while importing configuration from NWDI into NWDS

Hi All,
I am working on customizing ESS applications. I am unable to import the configuration from NWDI to NWDS. When I select 'Remote' option and enter the user id and password for SLD, I get the following error:
<b><b>HTTP response "Unauthorized" from CMS server</b></b>
Any idea.
Thanks,
Tom

HI Tom,
Please check your username and password. It iseems it is incorrect.
Try o login with same id and password on
http://<server>:<port>/devinf
Here, try to login on each link. i.e.
CBS
CMS
SLD
and DTR.
It will ask for ID and password once again. Check whether it is working here.
There might be possibilities That you ID is locked.
Regards,
Bhavik

Help needed for importing the DC's from NWDI track very urgent

Hi all,
I am importing a DC from NWDI tracks.
I imported DC from NWDI with out any problem but i am unable to create a project
it shows an error while i am creating the project for DC in inactive DC's.
error message is :
Failed to sync DC "**.##/lpt/absencerequest/*.##_LPT_**_OPUS_FRAVAER_WEBDYNPRO_1)" in configuration
"JC0_DLPT0003_D". File "C:\Documents and Settings\****\.dtc\1\DCs\**.##\lpt\absencerequest\_comp\.dcdef" does not exist locally after sync but it exists on the server
can you plese tell me why its happening as soon as possible
it is a LEAVE REQUEST application in ESS
Regards,
Rajesh

Hi Rajesh,
Recently i worked on ESS business package and faced lot of probelem to bring the track from NWDI into NWDS. Most of the times the probelms are from importing only. Make sure that whether the DCs which you want to modify is getting imported properly or not. mean the while check the path of the local directory .. whether it is correct or wrong..
re import the components once and try to create the porject in local directory.
to to Work spave -> local directory -> .dtc -> 0 or 1 ( folder) -> DCS -> bin ->
if you still facing any problems pls let me know...
regards
Ratnakar reddy

Unable to see "New from Par" option while creating Custom portal layout

Hi All,
I am unable to see "New from Par" option in Content Administrator. I am trying to create a custom page Layout for which I am need create layout using new par file. I am not able to see this menu option. Does anyone know from where to enable this option?
Nitesh

There is no option like "new from par" from ep 7.
Create an iview based upon portal components.
check the below link for creation
http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm
Koti Reddy

Unable to Check for Update on OS 5.1

My iPad 2 will not update its software over the air and comes up with the message Unable to Check for Update. I have tried updating via iTunes 10.6 and it just sits there trying to contact the update server. I have also reset the iPad and restored from backup. Exactly the same problem!
Its nothing to do with the network as i get exactly the same problem at work as i do at home. My iPhone 4S updated to 5.1 without any problem. However my iPad just does not want to know.
Please help!

Correction. I started the update on my iPhone and my wife's iPad. However, they never finished. Each one returned an error message stating that the "Software Update Failed. An error occurred downloading iOS 5.1." I can't even get my ipad2 to get that far. It returns an error when trying to contact the server.

Deploy par files with code from NWDI

Hello Experts,
I have migrated some par files to NWDI and they are deployed via SDM as SDA files.
From eclipse it is possible to deploy the par files with Code. Is this possible from NWDI that the par files are deployed with code to the portal server.
Regards
Sundeep

Hi Satish,
I am using NWDS, and then check in the Portal DC which is then deployed on the runtime system.
My question is during deployment via NWDI is it possible that the par is deployed with code.
Earlier we were using eclipse for par based development, and this was possible in eclips.
With NWDI i dont think it is possible to control if the par should be deployed on the portal server with code included.
Regards
Sundeep

Unable to access values from database in login page..

Hey all,
Friends I have a login.jsp page and I want if i enter username and password then it will be accessed from database and after verifying the details it will open main.jsp.I made a database as "abc" and created DSN as 1st_login having table 1st_login. But the problem is that I am unable to access values from database.
So Please help me.
Following is my code:
<HTML>
<body background="a.jpg">
<marquee>
                    <CENTER><font size="5" face="times" color="#993300"><b>Welcome to the"<U><I>XYZ</I></U>" of ABC</font></b></CENTER></marquee>
          <br>
          <br>
          <br>
          <br><br>
          <br>
     <form name="login_form">
          <CENTER><font size="4" face="times new roman">
Username
          <input name="username" type="text" class="inputbox" alt="username" size="20" />
          <br>
     <br>
          Password
          <input type="password" name="pwd" class="inputbox" size="20" alt="password" />
          <br/>
          <input type="hidden" name="option" value="login" />
          <br>
          <input type="SUBMIT" name="SUBMIT" class="button" value="Submit" onClick="return check();"> </CENTER>
          </td>
     </tr>
     <tr>
          <td>
          </form>
          </table>
<%
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection("jdbc:odbc:1st_login");
Statement statement = connection.createStatement();
String query = "SELECT username, password FROM 1st_login WHERE username='";
query += request.getParameter("username") + "' AND password='";
query += request.getParameter("password") + "';";
ResultSet resSum = statement.executeQuery(query);
//change: you gotta move the pointer to the first row of the result set.
resSum.next();
if (request.getParameter("username").equalsIgnoreCase(resSum.getString("username")) && request.getParameter("password").equalsIgnoreCase(resSum.getString("password")))
%>
//now it must connected to next page..
<%
else
%>
<h2>You better check your username and password!</h2>
<%
}catch (SQLException ex ){
System.err.println( ex);
}catch (Exception er){
er.printStackTrace();
%>
<input type="hidden" name="op2" value="login" />
     <input type="hidden" name="lang" value="english" />
     <input type="hidden" name="return" value="/" />
     <input type="hidden" name="message" value="0" />
     <br>
          <br><br>
          <br><br>
          <br><br><br><br><br>
          <font size="2" face="arial" color="#993300">
     <p align="center"> <B>ABC © PQR</B>
</BODY>
</HTML>
and in this code i am getting following error
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:94: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:95: cannot find symbol_
4 errors
C:\Project\SRS\nbproject\build-impl.xml:360: The following error occurred while executing this line:
C:\Project\SRS\nbproject\build-impl.xml:142: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 6 seconds)

As long as you're unable to compile Java code, please use the 'New to Java' forum. This is really trival.
To ease writing, debugging and maintenance, I highly recommend you to write Java code in Java classes rather than JSP files. Start learning Servlets.

Unable to Check-in from NWDI

Similar Messages

Maybe you are looking for