Unable to check multiple use check box for BADI

Hi,
In ECC 6.0, when I am trying to activate the multiple use check box ( For multiple implementation of BADI ) , it is not allowed me the same.
Throwing the error as - interface IF_EX_TAX1_XTXIT_SET can not be used.
BADI name - BADI_TAX1_XTXIT_SET
Can anyone pls help me how to do this.
Thanks,
Shakti

Hello Sakti,
I am also in ECC6.0 & if i see the definition of the BAdI BADI_TAX1_XTXIT_SET, "Multiple Use" checkbox is checked! What are you trying to do - trying to create an implementation?
@Prabhu: Although the BAdI is "multiple-use", but there is not filter applied to it. Next time do your checks properly before replying
BR,
Suhas

Similar Messages

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

TS2504 I have installed Logi Pro and it has written over my garageband features (as above). Ive tried to reinstall Garageband as described above with the Installation DVD. But when i get to step 4 it wont let me check or uncheck the box for Garageband, it

I have installed Logic Pro and t seems to have wreitten over my GArageband 09 functions. when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box (stage 4 in Apple's isntructions above) . It does let me check teh other boxes for iPhoto etc.
Do i need to reinstall teh complete bundle for iLIfe 09? Will this mean I lose any of my material? eg photos in iphoto or clips in imovie?
scarey stuff!
please advise
sarah

drumkit2 wrote:
when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box
http://www.bulletsandbones.com/GB/GBFAQ.html#installerdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen)

There is no album artwork in the Multiple items information box for all albums

I have iTunes 10.0.5 and all my album artwork is present but when i bring up the Multiple item information box by clicking on an album there is no artwork there?
but there is artwork on the actual album. im wondering if this is why when im uploading music to the internet using FTP transfer the artwork doesnt come up next to the song name. It does with some and with others there is no art.
All the songs have ID3tags versoin 2.4 and have been converted to a MP3 file but still doesnt work.
Check this image to understand what i mean more.
So from the right itunes is showing an album with the album art, in the middle is showing the Multiple items information boc and on the left its showing my FTP with albumart work showing and some not showing?
PLease can someone help

*Why is artwork not showing on my iPod when it's there in iTunes?*
iTunes will display a cover in many of it's views provided at least one track from the album has embedded artwork. The iPod appears to load only the artwork from track one to create the cover flow and album views which means that it can sometimes fail to display art for albums even when you can see the art in iTunes. Further, when tracks are played on the iPod, artwork is displayed if and only if it exisits in the currently playing track, so track one may show art while track two does not.
*How to find tracks without artwork*
To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/scripts13.php for Macs. If you're using Google or other FWSE to locate suitable images they should be jpg's and ideally square, 320x320 pixels or above and borderless to give the best results in the various menus. If you have artwork for some tracks of an album, but not others, select a track with artwork, right-click (Option-Click for Macs) on the art & click copy, then select all the tracks of the abum, use CTRL-I or Option-I to *Get Info* and then paste the image into the artwork box.
*Rebuild artwork cache*
Sometimes the artwork cache becomes corrupt and fails to show correct artwork, even when this is properly set up in iTunes. To rebuild the artwork cache, connect your iPod to iTunes. Locate the iPod in the Sources pane on the left-hand side, then select the Music tab. Remove the tick from *Display album artwork on your iPod*, sync the iPod, reselect the option & sync again.
tt2

I checked the always save box for downloads and now don't have the option of "open"

I tried looking at the the firefox application thing and it said "always ask" next to things, but it isn't asking. Not sure how to get my open or save box back!

You can rename (or delete) the mimeTypes.rdf file in the Firefox profile folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)

Unable to see scanner using PhotoShop CS for Import

Epson Perfection 48970 Scanner worked perfectly with iMac using MAC OS 10.6.8 and Photoshop CS. But that iMac was traded in for a new iMac, and now using MAC OS 10.8.5. PS CS is now inoperative for the upgraded operating system. Now working with Macbook Pro, MAC OS 10.6.8, and scanner works perfectly with the laptop, but NOT with Photoshop CS. The Epson doesn't show in the import mode, but the HP Officejet Pro 8500 does, which is a poor scanner at best. I have looked for the answer to this problem, but unable to solve the problem. I don't want to buy an upgrade version of Photoshop CS; I just want to covert some 35mm slides to paper photos, etc.

Thank you Rave for your reply to my communication dilemma between Photoshop and my Epson printer. In my original statement, my emphasis was on declaring that my older MAC, the Macbook Pro, would continue to operate with MAC OS 10.6.8, therefore Photoshop CS should “see” my Epson Perfection 4870 just like it did on my older iMAC, which also operated under MAC OS 10.6.8.
I finally withdrew from trying to upgrade whatever is required to have Photoshop CS recognize my Epson. Instead, I concentrated today on updating the Macbook Pro with software from Epson to successfully begin scanning my slides at 1200 and 2400 dpi, and saving the scanned images in tiff files. I will do image enhancement by using Adobe Photoshop CS, which is operational on my Macbook Pro, MAC OS 10.6.8. My biggest problem was that I was defiant in getting Photoshop to see my Epson…
I know there is a way to make Photoshop happy to shake hands with the Epson, but time is a factor for me…
Thanx again.
Will

Unable to roatate picture using the trackpad For Aperture

I'm having issue in rotating images with the trackpad with aperture. i've updated it to 2.1.2 so it should work. the rotating functions works with iphoto but not this. any advice?

Sorry,there is only touch capture.I was thinking about volume key that can be used to take a picture.Try to clear data for camera under settings-apps-all.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I am Unable to Customize Toolbars using Firefox 4RC1; For example, when I attempt to move the FTP Add-on Icon to a Tool Bar it doesn't work; the same is true if I attempt to move the Cut | Paste Icons to a toolbar.

Firefox 4 Minefield (firefox-4.0rc1.tar)
Fedora 14

It is possible that the file that stores details of toolbar customizations is corrupt, for details on fixing that see https://support.mozilla.com/kb/Toolbar+keeps+resetting

Printing multiple slides per page for pdf

Hey guys. I just downloaded 10.10.1 and I'm unable to print multiple slides per page for my pdf files. Usually before I print, I can choose an option if I want to have 4 or 6 slides per page printed (as this helps to save paper and is how I have my notes for school). But now, it says "copies per page" instead of "slides per page". So the print preview shows the same 1 slide printed 6 times on each paper, instead of 6 different slides on 1 paper (which what is what I was able to do before I downloaded Yosemite).
Does anyone know how to print multiple slides per page for pdf files???

Did you try the Layout panel? Page per sheet?

Unable to create delivery using ADSUBCON

Hi Gurus,
I am unable to create delivery using ADSUBCON transaction for the PO which has material with different Order Unit. My base unit of measure is EA where as the Order unit is Roll. If I delete the order unit system allows me to create delivery where the PO.
Why the system does not allow me to create the delivery when the order unit is different than base unit of measure.
Thanks in advance,
Shashidhar
Edited by: Shashidhar on Jan 29, 2011 5:19 AM

HI,
Its already been maintained.
Shashi

Urgent: please help me for BADI in CRM

Hi,
Could you please find me the Order check BADI in CRM .
Answered will be rewarded .
Requirement:- The average weight can be derived from the total weight during order entry by dividing the total weight by number of items. As is done in posting cheque entry.
Thanks In Advance
-Regards.

Hi Maddela,
u can find BAdIs in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards,
Ashish

Use check box for report and form

Hi Expert,
I try to use check box to select multiple rows in a report and then click on a button to go to a form on another page to choose some values from the form and then do a mass update for records selected in reports.
I read the "How to Work with Check Boxes" in 2 Day Developer guide, it works fine to select mutiple rows in report and do update with process in that report page.
However, if I click on a button to go to another page which contains a form, seems the values stored in the package array are cleared and not passed to that page.
Do you know how I could make this work?
Thanks a lot,
Jessie

Hello Sakti,
I am also in ECC6.0 & if i see the definition of the BAdI BADI_TAX1_XTXIT_SET, "Multiple Use" checkbox is checked! What are you trying to do - trying to create an implementation?
@Prabhu: Although the BAdI is "multiple-use", but there is not filter applied to it. Next time do your checks properly before replying
BR,
Suhas

How to select multiple row of table using check box?

hi,
         i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
          my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin Shah

Hello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
         node_course_assign type ref to if_wd_context_node,
         elem_course_assign type ref to if_wd_context_element,
         stru_course_assign type if_v_details=>element_course_assign ,
         item_popin_selected like stru_course_assign-popin_selected.
"     navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
"     navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
"     @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
   <wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop.

How to save the session states for a tabular form WITHOUT using check boxs?

Greeting guys,
As you know that we can use collections to save the session states of a tabular forms, described in the how-to doc of manual tabular forms. However, what I am trying to do ( or have to do) is to provide a manual tabular form, and save the session states for validation, without using the check boxes. Because a user can put contents into some columns in a row without checking the corresponding checkbox, according to the requirements. So basically what I tried is to loop over all the rows and save Every entry into a collection. However, sometimes I got "no data found" error with unknown reasons.
My current solution is to use the "dirty" Retry button that gets back the history, which IMO is not a good workabout. So, I'd appreciate if somebody can shed some light on a better solution, especially if it is close to the one in that how-to doc.
Thanks in advance.
Luc

The following is the first collection solutin I've tried:
htmldb_collection.create_or_truncate_collection('TEMP_TABLE');
for i in 1..p_row_num loop -- Loop on the whole form rows
if (htmldb_application.g_f01(i) is not null) or (htmldb_application.g_f05(i) <> 0)
--If either of them has some input values, the row should be saved into the colleciton.
then
htmldb_collection.add_member(
p_collection_name => 'TEMP_TABLE',
p_c001 => htmldb_application.g_f01(i),
p_c002 => htmldb_application.g_f03(i),
p_c003 => htmldb_application.g_f04(i),
p_c004 => htmldb_application.g_f05(i),
p_c005 => htmldb_application.g_f06(i),
p_c006 => htmldb_application.g_f08(i)
end if;
end loop;
Some of columns have null values, but I don't think that's the reason. Because once I clicked all the check boxes, there would be no error no matter what values were in other columns.
Another issue would be extract the values FROM the collection, which has been tried because I had problem to store the data into the collection. I used "decode" functions inside the SQL to build the tabular form. I am not sure whether it will be the same as a regular SQL for a tabular form, like the example in the How-to doc.
Also I didn't use the checksum, for it is not an issue at the current stage. I am not sure whether that's the reason which caused the NO DATA FOUND error.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Unable to check multiple use check box for BADI

Similar Messages

Maybe you are looking for