Unable to check'relevant for delivery' for 'Standard' Item type in Item cat

Hi
I am facing a strange situation in SAP when I tried to create a new
Item category with Item type as 'Standard' & 'Relevant for Delivery',I
am getting a message that 'Relevant for Delivery'is possible only with
Value Item & Text Item...We have an other Item category in the system
which is of Item Type 'Standard' & 'Relevant for Delivery'..We could
create that Item category without any issues..Could you please let me know
why system is behaving differently when we have same combinations( Item
type as 'Standard' & 'Relevant for Delivery'.)
Regards
Prasad

Hi Ramesh
Thanks for your response..
Only if we check'relevant for delivery' field the item will appear in the delivery document.
Regards
Prasad

Similar Messages

Unable to check in .sda file for ess in the track for NWDI

Hi Gurus;
We have created the track and added the three dependencies along with PCUI_GP.We have imported these into the track.
However after placing the .sda file for ess under Jtrans/CMS/Inbox folder and adding it as software component to the track through Landscape Configurator we are unable to get the ess component under the checkin tab of the track in CMS. Please suggest why this is happening?
Regards;
Anzar Naik

Dear Anzar,
What is the error message you are getting. check the CMS logs for the more information.
Please check n verify location of the inbox folder when you click on checkin tab.
refer to SAP Notes 872892.
Best Regards
Arun Jaiswal

ATP check for delivery in ECC & Sales order ATP check in APO

Hi All,
Can we do an ATP check for delivery in ECC , but for the same set of Materials- Plant combination , the ATP check when a SO is created should happen in APO .
We do not want to remove the Business event 'B' which is meant for delivery in APO . For some materials we need APO ATP check to happen for delivery & for some it should be in ECC & for SO the ATP check should happen in APO .
Even if we do not have check instructions pertaining to Business event 'B' & a particular check mode (for the materials where the ATP check for delivery should happen in ECC & SO check to happen in APO) , when we are doing an ATP check for delivery , it is still pointing to APO ATP check rather than ECC check .
Any pointers for this is highly appreciated.
Regards
Surendra

Hi Surendra,
For SO, business event is A and for delivery it's B. When integrated with ECC, the check rule in ECC points as biz event in APO.
You can control ATP check by customized settings for check rule in ECC.
Also, by setting requirement class and requirement type in ECC, you control check mode in APO. So, even if you dont define for check mode in APO, the system might refer from ECC for the ATP check settings. Look into your ECC customization for how requirement class is derived and settings for requirement type. (based on MRP type, strategy grp and Item cat).
I'm not sure how you can control ATP to happen for some sales orders/deleveries in ECC and for some in APO, since check mode is mentioned in material master.
However, there are ATP BADIs (business add-ins) available in both ECC and APO, whch can serve your purpose.
Regards,
Bipin

Open Order scheduled for delivery

Hi there ,
Please suggest me the report to spool the Open Order scheduled for delivery for a material ....
Regards
Kaushik

Hi
Check the delivery due list, its shows open orders due for delivery for a particular date
and the list can be printed or sent to spool
Anurag

Block the Material at Item level in Sales Order automatically for delivery

Hi!
My business scenario needs a material to be Ckecked for Inspection after raising the Sales Order by thirdparty person. So, I need to block that particular material at Item level automatically for delivery and rest of the line items can get delivered. I can do this by selecting the reason for Block at Item level manually, but I want the system to get detemine this block. And one more thing is that there is NO Quality Management module for this. So, let me know what I need to configure for this effect. Thank you.....

hi,
pl check the user exit " userexit_save_document_prepare" or "userexit_save_document".
Take the help of your abaper to see if the logic written here can affect the item level block in the sales order for inspection. Create new reason for the item level block and have it triggered with this exit. Instead of hard coding which might require regular intervention of abaper for code changes for the business to be able to manage it, maintain a master data in the material master against some field with a key.
now use that key to identify if these materials require to be blocked at the sales order level for inspection. To release this item again the user has to go in VA02 mode to release the block. Let this be done after the inspection of that material.
regards
sadhu kishore

Sales order need to be blocked for delivery while creation

Hi experts,
                My requirement is to block sales orders for delivery, for the selected distribution channels, and for selected countries while creation itself, so for this I came to known that a program MV45AFZZ include, here in this at which form can I write code to block SO for delivery. and is it enough to put a reason in the field LIFSK in VBAK table to block SO for delivery.
Thanks in advance
Regards
SriNivas........

Hi,
You can use form routine USEREXIT_SAVE_DOCUMENT_PREAPRE of user exit MV45AFZZ to update the delivery block.
MOVE '10' to vbak-lifsk.                    "13 is the reason for block in header"
MOVE '10' to xvbak-lifsk.                  "13 is the reason for block in header"
Use following code to update delivery block at item level
MOVE '10' to vbep-lifsp.                      "13 is the reason for block in item schedule line"
MOVE '10' to xvbep-lifsp.                    "13 is the reason for block in item schedule line"
Regards
Vinod

What is the Availability check relevant for batches in Std. SAP except CH

Hi,
What is the Availability check value in material master relevant for batches in standard SAP except CH.
As far as I know CH will enable to have automatic batch determination at sales order level. In the same manner, do we have any other availability check value in standard SAP like CH which will enable batch determination at delivery level.

Don't post the same question repeatedly. Keep one thread open and close the other threads.
You have already posted the same at Wha is batch relevant availability check value in standard SAP except CH
Regards,

For Delivery Performance what are the standard report available n SAP?

For Delivery Performance what are the standard report available n SAP?

hi
If you wanna know the SD report just go to SAP1 transaction code from easy access( it works only from easy access) and you will find entire reports available in SAP. Then select what is relevant to you. And as you asked any material on reports, so I have some good material on it and will surely send you tonight.
And Some of the Standard reports in SD are given below check it out for convenient however always better to chek above told transaction code:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
These are all main standard reports as well I am again repeating that it's better to check all reports from above said transaction code.

Replenishment delivery for material with MRP areas and Avl Check

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps...

Credit check for delivery

Hi, I met some issues need your help!
Currently, I have set the credit limit check at delivery level.and the reaction status is B(error message)
and define a table Z_LOG for record the relevant infomation by user-exit.
1. Create sales order with VA01, and write down the relevant information into Z_LOG.
2. Create delivery with VL01N. if this document has exceed the limit value,The system will appears an error
message and failed to create. but I want to record this error message into Z_LOG base on the
sales document. Have any user-exit to solve this problem?? Thanks a lot!
The structure of Z_LOG as below.
SO, SOItem, Material, Q'ty, Delivery, Delivery Item. Error.

Hi
Please check if you have assigned the credit group to delivery document and respective credit checks are maintained in Automatic credit check with the credit group used to delivery. Also check the static and dynamic check are ticked according to your requirement and ticked in block as well.
If still you are facing the problem please check FD32 and check if proper delivery cost is excuted when you create delivies and the credit limit get used. In short check your info structures are properly updated.

Order blocked for delivery as a result of credit check - VL060

Dear Experts,
Credit Management is active in the Process.
Every time I try to create Delivery Document including Returns Delivery the following error is displayed "Order blocked for delivery as a result of credit check"
I will release the document by using Tcode VKM3.
Though Credit Limits are maintained for Customer in FD32 and credit Exposure has not exceeded the Credit Limits the Delivery Document creation is bloced.
How to solve this issue.
Regards
Hari

Hi Prasanth,
Checked both the areas i.e.
In VOV8, the field Delivery block is Blank and
In VOV7 for Returns item category credit active is unticked.
Even while doing standard delivery system is blocking for creating Delivery, which needs to be released using VKM3 Transaction. I have checked for Item category TAN where the credit active is checked.
Please suggest solution for both Standard and Reurns Delivery Block issue.
regards
Hari

Standard data sources for Delivery and Purchase order quantity.

Hi gurus ,
Are there any standard data sources available for Delivery and Purchase Order quantity in Purchasing area .
Thanks in advance .

Hi,
If you are looking for SD Scenario: Check this : https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Happy Tony

Partner Function for STO and relevant inbound delivery

Dear Expert,
i did the partner configuration for Vendor and STO with partner VN-vendor DP-delivery plant.
When i create the STO vendor UP07, both of VN and DP are UP07, but when i create the STO for UP07, no partner data come out for the PO, the partner data didn't copy out from vendor master.For standard PO not STO, the partner data are copied from vendor master automatically. Any advice any further more setting need to do?
I manually input the partner data for the STO, then i try to create inbound delivery, following incompleteness came out"Vendor : Account Number of Vendor or Creditor Missing",user need to manually input the partner number for LF-vendor.But when i check the partner setting for inbound delivery, LF is copied out from VN.Any more setting need to do to make sure the partner number of LF is auto copied from PO data.
Look forward to your reply,
Thank you and regards

Hello,
PLease check the vendor data created as a plant. Go to Vendor master and in purchasing view select extras -> additional Purchasing data-> in the plant assignment enter the Plant number. This will pull in the vendor details into the inbound delivery.
Thanks!!

Standard output type for Delivery picking list

Hi All,
My requirement is to trigger a picking list from the outbound delivery whenever the overall WM status is "B". Probably I need to look at a new requirement routine to add this condition.
Pls tell me what is the standard output type available for delivery picking list. I have analyed "EK00". Looks like this works only for deliveries without warehouse management.
Also we dont have a customization path for "EK00" and it has to be assigned to a shipping point.
Pls confirm if we can use EK00 for deliveries with warehouse management and is it correct?Else what is the other standard output type available for delivery picking list.

check ZPCK picking list.
SPRO>Logistics Execution>Shipping>Basic Shipping Functions>Output Control-->Define print parameters shipping
Here available ZPCK condition type.I think this condition record you can use.

Unable to check for available downloads. The network connection timed out.

I downloaded iTunes 10.1.2 last week, and attempted to upgrade some music to iTunes Plus. I'm showing 35 items in my download queue, but when I attempt to download I get a message "Unable to check for available downloads. Network connection timed out."
I e-mailed Apple Tech Support multiple times, and received their standard list of links for things to try. So far I have reinstalled iTunes, turned off my Norton Firewall, checked the program rules settings, flushed the dns cache, and unchecked the "allow simultaneous downloads" box. Still no luck.
Apple's last e-mail requested I send them my account info so they could reset my password, and check my system. I'm still waiting for that to happen.
I'd appreciate any user suggestions for this problem.

Fundamentally it is an apple itunes server issue - if you have a lot of downloads the "check for downloads" request can take longer than the default windows internet connection timeout setting - which is 30 seconds on more recent versions of windows.
You can work around it though - without requiring apple to "segment" your download list, by adding a windows registry setting.
Apple re-enabled my downloads after I was burgled and then I was stuck - my "check for downloads" was always timing out - and the support guy had no clue - so I went digging, and found a a microsoft article here http://support.microsoft.com/kb/181050 which tells you how to change change that default timout value by adding a registry setting. Besides adding the ReceiveTimeout setting detailed on that page - I also changed the KeepAliveTimeout - just in case.
HKEYCURRENTUSER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\ReceiveTimeout
which I set to 180000 milliseconds (3 mins)
HKEYCURRENTUSER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\KeepAliveTimeout
which I set to 181000 milliseconds (3 mins and 1 second)
Use regedit to make the change - both settings are DWORDS with decimal values. You'll need to restart your PC to apply the change.
After the change and restart and one initial failed attempt the request for downloads worked - when the apple itunes server responded after 2 minutes !!

Unable to check'relevant for delivery' for 'Standard' Item type in Item cat

Similar Messages

Maybe you are looking for