Unable to CIF Materials with Classification View
Hi,
We sent materials from R/3 (4.6C) to SCM 4.1.The materials without classifcation view went through successfully. But the materials with classifiation views failed. I have selected the materials,plant,class.characteristics. The organizational indicator is same for material in R/3 and APO. I have seelcted the class type. When I create the integration model an entry in the class is visible.
But the material is not transferred. Did I miss anything ?
If you have any tips or input ,please letme know.
Thanks a lot
In the old way of things - what did change?
Look at the WebAccess on the HTTP view - how long does it say that it
has been up?
rpm -qa novell-group What version
What does the POA report?
If this has all got squirrely rcgrpwise stop, rcapache2 stop and
rctomcat5 stop (then restart them again in reverse order)
T
On Fri, 02 Sep 2011 19:26:02 GMT, taphillips
<[email protected]> wrote:
>
>We have webaccess agent 8.0.2 running on OES SLES 10 sp3.
>In the past few days webaccess users cannot send email when compose
>view is set to html. They will be redirected back to the address bar to
>input an address even though there is already and address listed. Some
>will get the message "you must specify a recipient to send to" It will
>send ok when set to plain text.
>It happens across all operating ystems and different browsers and
>versions I have tried so far.
>I did find and old reference to this problem, but it had to do with an
>older agent working against a newer post office.
>This seemed to happen quite suddenly. We have had several power outages
>in the last week or so but the server has not gone down.
>Any ideas?
>Thanks,
>Tom
Similar Messages
-
Bdc for MM01 with classification view
Hi all,
I need to create materials using mm01 with classification view. since there is no bapi supporting this view, i am ding by bdc.
The problem is in classification view once i give the class type and name a screen pops with caption
characteristic value assignment, but theere are no charateristics displayed - wat values do i have to enter here >
once i leave this screen the characteristics show up one after the other and i can load the details. but then while tryin to save error comes staing incnsisitent value assigned. wat do i ener in the intermediate screen t avoid this error.
thankshi when you are creating a classification view with characteristics.. you need to do all at once... you cannot modify..
all you can do is delete the whole view and create with all the changed again.. I dont memorize the BAPI .. but you have BAPIdelete.. BAPIadd.. -
Transfer of material master data with Classification view
Dear Experts
I want to transfer material master data between R/3 using ALE. We are able to send master data using BD10 without classification view.
Please let me know in detail the configuration, steps invloved in sending materail master along with classification view.
Regards
SamalHAI FRIENDS,
CHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
->CREATE CHARACTERISTIC USING TCODE CT04
->CREATE CLASS USING TCODE CL01 .
-> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
OBJECTKEY = P_MATNR.
OBJECTTABLE = 'MARA'.
CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = OBJECTKEY
OBJECTTABLE = OBJECTTABLE
CLASSNUM = CLASSNUM
CLASSTYPE = CLASSTYPE
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
RETURN = RETURN
LOOP AT RETURN.
WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
BY VENKATESWARAREDDY D
MYTEC SOFT LTD -
MSS - Unable to work teamviewer with generic view table iview
Hi Portal experts !
I work on a portal migration project from EP5 to EP6 and I have a problem to work together a "teamviewer" iview and a "generic view table" iview.
The teamviewer displays all my employees and when I click on a employee, the "generic view table" iview must display me his/her career in the company (the iview execute a SAP query with in input the personal ID of the selected employee).
On EP5, it is working.
But on EP6, it is not working. I have no error message displayed but it throughs me on the first folder of the test portal role I have created.
I have used the same templates from EP5 to create EP6 iviews.
There are few parameters on each iviews, so I don't know where can be the origin of problem :/.
If you have any clue, it would be great !
Thanks by advance
Best regards,
NicolasI've found the solution: I have to set the "isolation method" property to "Pumped" for the iView which catches the event launched by the teamviewer.
What is looked strange is that isolation method is deprecated
Hope that it will help someone on this subject.
Nicolas -
Classification view creation via LSMW for Material master
Hi,
We are planning to have an LSMW for creation of material master along with classification view for configurable materials.
Though we see a flag to indicate classification view - XEIC1 Indicator: take Classification view into account
We do not see a structure where in we can pass all the characteristics and the corresponding values.
Is this something possible only with BAPIs such as -> BAPI_OBJCL_CREATE after creation of other view for that material.
Regards,
HRHi,
Thanks for the response. This is helpful.
However, we were intending to use a single LSMW for creation of all views of material master including classification view. Right now we are using Program RMDATIND as direct input method in LSMW.
Please let me know if there is a way to use single LSMW for creation of all views of material master.
Thanks
HR
Edited by: Hema Rao on Jan 8, 2009 7:58 AM -
Table to see classification view
Hi All
I have few materials for which classification view is maintained using class typee 001. now one of the characteristics is PPL(Prod plannin level), i wanted to know if there is any table / report where i can input the material number and get value maintained against this PPL characteristics.
Regards
YogeshHi
have a try with table MARC- field PSTAT
also check table MARA field VPSTA.
if MARA-VPSTA has value C it is maintained with classification view
Vishal... -
Material Classification view at plant level
My company has multiple plants set up with materials and I would like to know on the business side if there is a way to tell if the Classification view tab is missing for plant & material.
I've tried using SE16 MARA, table view, but it show materials at the client level with Classification view but not set up at the plant level. Tks,Dear Friend
Which Class type are you using in the classification view? What batch classification you can use is dependent on the batch level you have chosen.
E.g. if your batch level is plant, then you have 022 batch class, While for material and client level you have Class Type 023. If you are going by the above e.g then you should be looking in to tables like MCHA, MCHB..........
You might be interested in following tables if you are using Classification.
KLAH Class Header Data
KLAT Classes: long texts
KSML Characteristics of a Class
AUSP Characteristic values
KSSK Allocation Table: Object to Class
CABN Characteristic
CAWN Characteristic values
Thanks & Regards
SE
Thanks & Regards
Gopal SP -
To upload Classification View.
Hi All,
I need to extend the materials for Classification view, for both Batch Class and Material Class.
Now the problem the quantity is too huge to do it one by one so, may I know to do it in mass or if by LSMW then pls let me know the STD.
With Best Regards,
Shyamal JoshiHI,
TRY the same with the help of BDC which can be done by a abaper.
you give the required input so that abaper can develop a recording .
Regards,
velu -
Report with Classification Data & Batch
Hi,
We have created a Material, say 10001, with Classification View with the following details:
Class Type: 023
Class: PAPER_BATCH
Characteristic: 1. Paper Bulk, 2. Paper Brightness
While doing Goods Receipt for the Material 10001, we have entered the values 10 & 15 for Characteristic Paper Bulk & Paper Brightness respectively and Batch 082010.
Now I want a report where in I can view the following all the above data like Material, Batch, and the Values of the Characteristic entering during the Goods Receipt
What all are the reports related with Class & Batch?
Please guide.
Regards,
PKHi,
There is No Standard SAP report
Check this link
Re: Table for Material Classification data
check the above link for the table
Using the table you can write Z reports
Regards
G.Ganesh Kumar -
Classification view in MM01 with LSMW
Hi all,
I am trying to upload Material Master data from LSMW using Direct Input method.
When I am using Direct Input method, I am not able to find fields such as KLART and CLASS_01 regarding Classification View(3rd view).
So I tried Batch Recording , still that data is not posting instead giving the message : "No data for the screen"
Is there any way to upload classification of material details?
Any ray of hope will be appreciated.
Thanks in advance.Hi,
Classification is a cross-application component and so it can be associated with any object, be it a material or a work center or a BOM etc. It treats everything as an object and is identified with the object key.
So you will create the objects first(materials, work centers etc), and then assign classes to them with some characteristic values. Now most of the online transactions combine these two activities into one and so you will be able to create a material and also create its classification view at the same time in MM01. But programatically there is no single such utility to do them together. You have to load your material masters first and then your classification using two different LSMW objects.
Hope this helps,
Srinivas -
Create classification view with inbound MATMAS_BAPI iDoc
Hi there,
We receive material master data from our customers and create them in our SAP system using a MATMAS_BAPI mssage type.
Now we should also create the classification view of the materials with a certain classification type and value.
The MATMAS_BAPI message type does not have segments to create the classification view.
Doe anybody know what the standard procedure is to achieve this?
Thank you very much in advance.
Kind regards,
Timclassification is transported with CLFMAS IDOC.
Classification is in general independend master data, that has its own area in the SAP menu and IMG.
It is just an embedded functionality in manual material master maintenance.
For data transfers it is an extra step and not included in MATMAS IDOC and BAPI. -
How to view materials with selected moving average price
Dear Gurus,
How to view materials with moving average price greater than some selected value? ie..Is there any report which takes moving average price as input?
Thanks in advance,
SastryHI
While checking any table or report u cannot give conditions (more than this value).
If it mabe the case, down load the data from table MBEW - Field Name VERPR to excel file. then u apply conditions, like greater than this value.
U'll get the desired out put.
Thanks
Raman -
Report: Classification view of material master
Hi,
We have activated Batch management for materials.
But for certain material codes, users have not maintained the Classification view.
Is there any report by which we can knowu2019 whether classification view for the material have been maintained or not?Hi,
Check with MM50 with Maintenance status as C
Regards,
Biju K -
How to add classification view using BAPI_MATERIAL_SAVEDATA
Hi,
Please any one let me know how to add classification view using BAPI_MATERIAL_SAVEDATA to the material master.
Thanks,
shekarWe use this bapi on a regular basis as well as classification of materials. We have success doing this in 2 steps. First step is to save the material using BAPI_MATERIAL_SAVEDATA, second step is to save classification using BAPI_OBJCL_CHANGE (this can be used for both create and change) Also look at Function Group CLBPA . there are several bapi's in that group dealing with object classification, including the one I mentioned..
-
Purpose of maintaining classification view in material master
Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang
Maybe you are looking for
-
MacPro 1,1 10.6.8 won't boot after kernel panic
I apologize for the long post, but figured I'd lay out the whole scenario. I had a kernel panic in Safari yesterday. Powered down. Powered on. Message appeared saying to power down, and restart again. Did that. Then the fun started. The restart was s
-
Adobe creative cloud not finding updates
Hey everyone, I've got a problem at the moment, for some reason, Adobe Creative Cloud isn't alerting me with any new updates. At the moment my creative cloud reads that I have updated all my app's and that they are all up to date, yet I know today Ph
-
have a situation like two new records (orders) are posted in R/3. And I have to pull the newly posted records to BW for 2LIS_11_VAITM data source .In BW there is already an init load. My question is what would be my steps to pull the newly posted rec
-
Hi all, - In a project, we will throws or catch direct an exception or write our exception ? Ex : throws or cacth : exceptions in java.lang.Exception Or : CustomException How many Exception class we will write ? and how we write ? - I use log4j. We u
-
Problem migrating onClipEnter frame and angle property in as 3.0
Hello, I'm trying to migrate a simple actionscript 2.0 app to 3.0 and I'm having some problems finding equivelents of the onEnterFrame methods and the angle property in as 3.0. In this section, I need to have the t movieClip variable onEnterFrame met