Unable to clear backup data
Have a mid 2013 MBP - with 4 GB ram and 500 GB drive. though i have deleted the big outlook back up files totaling 140 GB - still the drive shows a back up of 139 GB - how can i clear this space and increase my storage capacity.
Kindly give me some solutions to clear up the backups.
Regards
Kousik
Local snapshots are hidden copies of files that have changed or been deleted in between Time Machine snapshots. They are stored in free space that would otherwise be unused (and therefore wasted.) The space is managed automatically. When free space starts to run low, the snapshots are deleted. The Finder reports the space occupied by local snapshots as "Available," which it is. The Storage display shows them as "Backups."
If there are unwanted changes to files in between Time Machine snapshots—which may be far apart when you're moving around with a portable computer—you may be able to recover from a local snapshot. If you disable local snapshots, you lose that protection, and gain nothing in return. There is no benefit, only risk.
Empty storage space, beyond a certain minimum, is wasted. You paid for it to be there, but it's doing you no good at all. Local snapshots put it to use.
Very seldom, if ever, you might need to delete the local snapshot store in order to add a large amount of data to the volume all at once. If that need ever arises, all you have to do is turn Time Machine OFF in its preference pane, and then turn it back ON immediately.
Similar Messages
-
Is there a way to clear backup data from timemachine?
I want to start a new back-up sequence with time machine.
is there a way to "erase" the existing backup data for the time machine disk and start a new routine without affecting wireless, etc settings?To completely erase the Time Capsule hard drive......
Open Macintosh HD > Applications > Utilities
Click Manual Setup
Click the Disk icon
Click the Disk tab
Click Erase
The Quick Erase option will only take a moment or two. This will not affect your network settings at all. -
Unable to clear the data by clear button in Query region in Expenses Home
Hi,
I have created two custom regions of query type through JDeveloper,
Clear button is not working in one region (especially which is on top of both, no matter region 1 or region 2 )
I didn't write any code there
please advise how to fix this one
Thanks
SureshExtend the controller class file
Write below code in process request
OAQueryBean query1 = (OAQueryBean)oawebbean.findIndexedChildRecursive("QueryRN");
query1.setClearButtonName("CustomClearButton");
query1.setGoButtonName("CustomGoButton");
Thanks
Suresh -
I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570 -
Unable to delete the iPhone4 old backup data after move to iPhone5 ToT HELP!!
Unable to delate the iPhone4 old backup data after move to iPhone5 ToT
How can I delete the old phone backup file to release iCloud space?I have done some digging, but no dice. It seems to be a known bug in the system. Some suggested going to an Apple Retail Store about the problem, but no solutions as of yet. Sorry I couldn't be more help.
One board post I saw said taking it to the retail store did get it fixed for him. Maybe you will have the same luck? -
Just had to replace iPad and itunes has following error. "iTunes was unable to load provider data from Sync Servies. Reconnect or try again later." I read that others suggest uninstalling and reinstalling iTunes. If I do this, will I lose my old iPad's backup that I need to restore to this new one?
I've resolved the issue with iTunes constantly not responding. It's a bit embarrassing. I had a DVD in the drive that was corrupt, and once I was able to remove it - BAM - iTunes ran perfectly.
I'm still getting the Sync Services message, and my backups are still not showing in iTunes.
Getting there.... I hope! -
Time machine fails to complete backup
I've been getting the Unable to Complete Backup error message for several days. Last good back up was 11-22-13 at 11:13PM. I am running an iMac with OS-X 10.7.5.
I did the above steps in Console and got a huge string of lines; I tried to edit all repeitious ones that were the same, but still ended up with a lot of lines that seemed to develop more different processes over a few days. Sorry to put all this stuff in here, but I don't honestly know what to make of all of this code language.
Thanks for any help you can provide.
Dion G.
11/23/13 12:12:48.009 AM com.apple.backupd: Starting standard backup
11/23/13 12:12:48.296 AM com.apple.backupd: Backing up to: /Volumes/LaCie/Backups.backupdb
11/23/13 12:12:48.381 AM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/LaCie/Backups.backupdb/John Gold’s iMac size:37
11/23/13 12:12:48.383 AM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/LaCie/Backups.backupdb/John Gold’s iMac size:37
11/23/13 12:12:58.395 AM com.apple.backupd: Backup failed with error: 2
11/23/13 12:25:06.000 AM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=49308[GoogleSoftwareUp] clearing CS_VALID
11/23/13 12:38:52.699 AM mDNSResponder: PenaltyTimeForServer: PenaltyTime negative -61137, (server penaltyTime 534452908, timenow 534514045) resetting the penalty
11/23/13 3:12:57.795 AM com.apple.backupd: Backup failed with error: 2
11/23/13 3:15:15.240 AM com.apple.SecurityServer: Killing auth hosts
11/23/13 3:15:15.240 AM com.apple.SecurityServer: Session 100170 destroyed
11/23/13 3:21:15.000 AM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=49482[GoogleSoftwareUp] clearing CS_VALID
11/23/13 3:41:46.869 AM SubmitDiagInfo: Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2013.10.24.asl
11/23/13 7:12:49.960 AM xpchelper: for uid: 89 -- timeout while waiting on FSEvents flush; clearing cache.
11/23/13 7:12:50.000 AM kernel: USBF: 4323643.816 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/23/13 7:12:52.000 AM kernel: USBF: 4323645.816 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/23/13 10:41:47.673 AM SafariDAVClient: ServerNotifications: Setting delegate to APSD
11/23/13 10:41:47.971 AM SafariDAVClient: Subscription request completed
11/23/13 10:49:36.000 AM kernel: AirPort: Link Down on en1. Reason 1 (Unspecified).
11/23/13 10:49:37.125 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
11/23/13 10:49:37.150 AM configd: network configuration changed.
11/23/13 10:49:37.160 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x10da9a640>: The operation couldn’t be completed. Socket is not connected
11/23/13 10:49:37.169 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x7ff452e1e130>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
11/23/13 10:50:35.000 AM kernel: en1: BSSID changed to 00:22:3f:6c:ec:79
11/23/13 10:50:35.000 AM kernel: AirPort: Link Up on en1
11/23/13 10:50:35.000 AM kernel: en1: BSSID changed to 00:22:3f:6c:ec:79
11/23/13 10:50:35.000 AM kernel: AirPort: RSN handshake complete on en1
11/23/13 10:50:35.778 AM configd: network configuration changed.
11/23/13 10:50:35.829 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
11/23/13 10:50:35.829 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on _____because it is protected and not on the exception list
11/23/13 10:50:35.829 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
11/23/13 10:50:35.833 AM configd: network configuration changed.
11/23/13 10:50:39.371 AM mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.11)
11/23/13 11:10:58.000 AM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=49703[GoogleSoftwareUp] clearing CS_VALID
11/23/13 12:31:33.000 PM kernel: en1: 802.11d country code set to 'US '.
11/23/13 12:31:33.000 PM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
11/23/13 12:31:53.000 PM kernel: en1: BSSID changed to 00:22:3f:6c:ec:79
11/23/13 12:31:53.000 PM kernel: AirPort: Link Up on en1
11/23/13 12:31:53.000 PM kernel: en1: BSSID changed to 00:22:3f:6c:ec:79
11/23/13 12:31:53.000 PM kernel: AirPort: RSN handshake complete on en1
11/23/13 12:31:54.839 PM configd: network configuration changed.
11/23/13 12:31:54.863 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
11/23/13 12:31:54.863 PM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on _____because it is protected and not on the exception list
11/23/13 12:31:54.865 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
11/23/13 12:31:54.866 PM configd: network configuration changed.
11/23/13 12:31:57.839 PM mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.11)
11/23/13 1:08:24.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=49779[GoogleSoftwareUp] clearing CS_VALID
AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/23/13 2:12:51.000 PM kernel: USBF: 4348845.128
11/23/13 9:01:45.478 PM AddressBookSourceSync: ServerNotifications: Setting delegate to APSD
11/24/13 1:12:47.882 AM xpchelper: for uid: 89 -- timeout while waiting on FSEvents flush; clearing cache.
11/24/13 1:12:48.000 AM kernel: USBF: 4388443.224 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/24/13 2:12:18.000 AM kernel: USBF: 4392013.271 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/24/13 2:12:20.000 AM kernel: USBF: 4392015.271 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/24/13 2:12:45.274 AM com.apple.backupd: Starting standard backup
11/25/13 7:16:03.000 AM kernel: IOSurface: buffer allocation size is zero
11/25/13 7:45:32.761 AM com.apple.SecurityServer: Session 100192 created
11/25/13 7:45:33.000 AM kernel: IOSurface: buffer allocation size is zero
11/25/13 8:41:42.285 AM SafariDAVClient: ServerNotifications: Setting delegate to APSD
11/25/13 8:41:42.497 AM SafariDAVClient: Subscription request completed
11/25/13 9:07:30.640 AM ARM: Adobe Reader Updater encountered errorCode 1651
11/25/13 9:07:31.117 AM com.apple.launchd.peruser.501: (com.apple.talagent[48819]) Exited: Killed: 9
11/25/13 9:07:31.142 AM com.apple.launchd.peruser.501: ([0x0-0x2969967].com.apple.AppleSpell[48875]) Exited: Killed: 9
11/25/13 9:07:31.145 AM com.apple.launchd.peruser.501: (com.apple.mdworker.pool.0[51239]) Exited: Terminated: 15
11/25/13 9:07:31.211 AM loginwindow: DEAD_PROCESS: 48772 console
11/25/13 9:07:31.745 AM UserEventAgent: CaptiveNetworkSupport:UserAgentDied:139 User Agent @port=30703 Died
11/25/13 9:07:32.522 AM loginwindow: Login Window Application Started
11/25/13 9:07:32.813 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
11/25/13 9:07:32.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
11/25/13 9:07:32.000 AM kernel: 4503331.208495: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
11/25/13 9:07:32.000 AM kernel: USBF: 4503332.191 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/25/13 9:07:32.846 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
11/25/13 9:07:32.861 AM configd: network configuration changed.
11/25/13 9:07:32.865 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x7ff452e16f90>: The operation couldn’t be completed. Socket is not connected
11/25/13 9:07:32.872 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x7ff452e16f90>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
11/25/13 9:07:33.397 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
11/25/13 9:07:34.059 AM com.apple.SecurityServer: Session 100193 created
11/25/13 9:07:34.060 AM loginwindow: Login Window Started Security Agent
11/25/13 9:07:34.573 AM SecurityAgent: Echo enabled
11/25/13 9:07:34.573 AM SecurityAgent: Echo enabled
11/25/13 9:07:35.842 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected.
11/25/13 9:07:35.868 AM com.apple.revisiond: [ERROR] GSManager.m:-[GSManager _markLibraryCleanWithFSEventID:]:4827 Failed to mark library at path "/.vol/234881030/2/.DocumentRevisions-V100" clean.
11/25/13 9:07:35.892 AM fseventsd: disk logger: failed to open output file /Volumes/LaCie/.fseventsd/00000000020478ec (Invalid argument). mount point /Volumes/LaCie/.fseventsd
11/25/13 9:07:35.893 AM fseventsd: disk logger: failed to open output file /Volumes/LaCie/.fseventsd/00000000020478ec (Invalid argument). mount point /Volumes/LaCie/.fseventsd
11/25/13 9:07:36.384 AM com.apple.backupd: Stopping backup to allow backup destination disk to be unmounted or ejected.
11/25/13 9:07:36.433 AM fseventsd: disk logger: failed to open output file /Volumes/LaCie/.fseventsd/00000000020478ec (Invalid argument). mount point /Volumes/LaCie/.fseventsd
11/25/13 9:07:36.452 AM WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
11/25/13 9:07:36.903 AM com.apple.backupd: Backup failed because the destination disk was ejected or disconnected unexpectedly!
11/25/13 9:07:40.553 AM SecurityAgent: User info context values set for Max
11/25/13 9:07:40.553 AM SecurityAgent: User info context values set for Max
11/25/13 9:07:40.727 AM authorizationhost: Failed to authenticate user <Max> (error: 9).
11/25/13 9:07:44.359 AM SecurityAgent: Login Window login proceeding
11/25/13 9:07:44.359 AM SecurityAgent: Login Window login proceeding
11/25/13 9:07:45.184 AM loginwindow: Login Window - Returned from Security Agent
11/25/13 9:07:45.222 AM loginwindow: USER_PROCESS: 51246 console
11/25/13 9:07:46.430 AM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 27887
11/25/13 9:07:49.060 AM loginwindow: Unable to lauch TAL startup item: (null)
11/25/13 9:07:52.159 AM com.apple.dock.extra: 2013-11-25 09:07:52.157 com.apple.dock.extra[51303:1a07] Could not connect the action buttonPressed: to target of class NSApplication
11/25/13 9:07:56.690 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x7ff452e17fd0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
11/25/13 9:07:57.262 AM ntpd: bind(26) AF_INET6 fe80::d69a:20ff:fe5e:7ecd%5#123 flags 0x11 failed: Can't assign requested address
11/25/13 9:07:57.262 AM ntpd: unable to create socket on en1 (135) for fe80::d69a:20ff:fe5e:7ecd#123
11/25/13 9:07:58.253 AM configd: network configuration changed.
11/25/13 9:08:00.249 AM mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.11)
11/25/13 9:08:01.361 AM com.apple.SecurityServer: Killing auth hosts
11/25/13 9:08:01.361 AM com.apple.SecurityServer: Session 100192 destroyed
11/25/13 9:08:03.331 AM sandboxd: ([51315]) webfilterproxyd(51315) deny job-creation
11/25/13 9:08:05.771 AM com.apple.launchd: (com.apple.coreservices.appleid.authentication[51255]) Exit timeout elapsed (20 seconds). Killing
11/25/13 9:08:13.000 AM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=51339[GoogleSoftwareUp] clearing CS_VALID
11/25/13 9:08:25.726 AM sandboxd: ([51315]) webfilterproxyd(51315) deny network-inbound 192.168.1.11:51438
11/25/13 9:08:37.552 AM mds: (Normal) DiskStore: Rebuilding index for /Volumes/LaCie/Backups.backupdb
11/25/13 9:08:37.579 AM mds: (Normal) DiskStore: vsd:0x7f9bbb81a400 V1 backup being replaced by V2:/Volumes/LaCie/.Spotlight-V100/Store-V1/Stores/AF91ABB4-CBC0-43CA-B0E7-62B0C 66FE74C
11/25/13 9:08:37.594 AM mds: (Normal) DiskStore: Rebuilding index for /Volumes/LaCie
11/25/13 9:08:37.599 AM mds: (Error) DiskStore: Unable to create/find index location C243AE39-2379-4DD9-BEB0-92235DDD9C09 0
11/25/13 9:10:11.000 AM kernel: IOSurface: buffer allocation size is zero
O3REQUIRE FAILED: ret == 0
- file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
- line: 91
11/25/13 11:14:10.346 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
11/25/13 11:14:10.351 AM com.apple.SecurityServer: Session 100194 created
11/25/13 11:14:10.403 AM loginwindow: Login Window Started Security Agent
11/25/13 11:14:10.602 AM SecurityAgent: Echo enabled
11/25/13 11:14:10.602 AM SecurityAgent: Echo enabled
11/25/13 11:14:11.437 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
11/25/13 11:14:12.226 AM WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
11/25/13 11:14:12.391 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x10da4f970>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
11/25/13 11:14:14.589 AM SecurityAgent: User info context values set for dgoldsworthy
11/25/13 11:14:14.589 AM SecurityAgent: User info context values set for dgoldsworthy
11/25/13 11:14:14.701 AM authorizationhost: Failed to authenticate user <dgoldsworthy> (error: 9).
11/25/13 11:14:21.318 AM SecurityAgent: User info context values set for dgoldsworthy
11/25/13 11:14:21.319 AM SecurityAgent: User info context values set for dgoldsworthy
11/25/13 11:14:21.706 AM SecurityAgent: Login Window login proceeding
11/25/13 11:14:21.706 AM SecurityAgent: Login Window login proceeding
11/25/13 11:14:22.187 AM loginwindow: Login Window - Returned from Security Agent
11/25/13 11:14:22.196 AM loginwindow: USER_PROCESS: 51465 console
11/25/13 11:14:22.428 AM applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
11/25/13 11:14:22.544 AM com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
11/25/13 11:14:22.548 AM com.apple.launchctl.Aqua: load: option requires an argument -- D
11/25/13 11:14:22.548 AM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
11/25/13 11:14:23.503 AM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 29875
11/25/13 11:14:23.687 AM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[51487]) Exited with code: 1
11/25/13 11:14:27.567 AM applepushserviced: <APSCourier: 0x10da243c0>: Stream error occurred for <APSTCPStream: 0x10da955d0>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
11/25/13 11:14:28.111 AM loginwindow: Unable to lauch TAL startup item: (null)
11/25/13 11:14:28.176 AM mDNSResponder: NameResolvesToAddr failed:_rpcCall_NameResolvesToAddr mp:70
11/25/13 11:14:30.905 AM Mail: Using V2 Layout
11/25/13 11:14:34.352 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
11/25/13 11:14:34.352 AM com.apple.dock.extra: 2013-11-25 11:14:34.351 com.apple.dock.extra[51518:1a07] Could not connect the action buttonPressed: to target of class NSApplication
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.DeviceLocator
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.Mail
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.Ubiquity
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.MediaStream
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.BackToMyMac
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.Contacts
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.Bookmarks
11/25/13 11:14:46.737 AM [0x0-0x2bcdbcb].com.apple.mail: com.apple.Dataclass.Calendars
11/25/13 11:14:47.340 AM mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (192.168.1.11)
11/25/13 11:15:09.213 AM mds: (Normal) DiskStore: Rebuilding index for /Volumes/LaCie/Backups.backupdb
11/25/13 11:15:09.241 AM mds: (Normal) DiskStore: vsd:0x7f9bbbc10e00 V1 backup being replaced by V2:/Volumes/LaCie/.Spotlight-V100/Store-V1/Stores/AF91ABB4-CBC0-43CA-B0E7-62B0C 66FE74C
11/25/13 11:15:09.260 AM mds: (Error) DiskStore: Unable to create/find index location A7695109-F2AC-4225-97A4-EC26B035D257 0
11/25/13 11:15:09.266 AM mds: (Normal) DiskStore: Rebuilding index for /Volumes/LaCie
11/25/13 11:49:15.000 AM kernel: IOSurface: buffer allocation size is zero
11/26/13 9:42:12.998 AM com.apple.SecurityServer: Session 100199 created
11/26/13 9:42:14.000 AM kernel: IOSurface: buffer allocation size is zero
11/26/13 9:42:21.420 AM sandboxd: ([52363]) WebProcess(52363) deny file-read-data /private/var/folders/p2/63r06j813xq7skckqtbn7dw00000gn/C/com.nvidia.OpenGL
11/26/13 9:42:21.448 AM sandboxd: ([52363]) WebProcess(52363) deny file-write-create /private/var/folders/p2/63r06j813xq7skckqtbn7dw00000gn/C/com.nvidia.OpenGL/0361 820C-7006-3AB4-91A1-D589847D8455/9C6E3681D12A6DBB/C0DFC936-7CBA-3F6C-AD06-180A99 1B70C2.toc
11/26/13 12:43:22.479 PM com.apple.Dock.agent: objc[52554]: Class ABBezelWindow is implemented in both /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook and /Library/Widgets/Address Book.wdgt/AddressBook.widgetplugin/Contents/MacOS/AddressBook. One of the two will be used. Which one is undefined.
11/26/13 12:43:25.705 PM DashboardClient: error [1001] setting colorSpace to iMac colorspace
11/26/13 12:44:15.853 PM Dock: kCGErrorIllegalArgument: CGSReleaseWindow: Invalid window 2
11/26/13 12:44:15.853 PM Dock: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
11/26/13 12:45:06.816 PM com.apple.SecurityServer: Killing auth hosts
11/26/13 12:45:06.816 PM com.apple.SecurityServer: Session 100199 destroyed
11/26/13 12:45:07.215 PM com.apple.SecurityServer: Session 100202 created
11/26/13 12:45:30.471 PM iCal: ServerNotifications: Setting delegate to APSD
11/26/13 12:45:30.739 PM iCal: ServerNotification: configureService called with nil password
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.DeviceLocator
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.Mail
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.Ubiquity
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.MediaStream
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.BackToMyMac
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.Contacts
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.Bookmarks
11/26/13 12:45:31.596 PM [0x0-0x2cd8cd6].com.apple.iCal: com.apple.Dataclass.Calendars
11/26/13 12:45:31.996 PM iCal: Subscription request completed
11/26/13 12:45:49.351 PM iCal: clip: empty path.
11/26/13 2:12:20.781 PM diskmanagementd: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x101985c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
11/26/13 2:12:21.019 PM diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x101985ae0=disk0s3=Recovery HD
11/26/13 2:12:21.401 PM diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7faaa8d03360
11/26/13 2:12:21.401 PM diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
11/26/13 2:12:21.448 PM fseventsd: Logging disabled completely for device:1: /Volumes/Recovery HD
11/26/13 2:12:21.603 PM diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7faaa8d0cac0
11/26/13 2:12:21.851 PM diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
11/26/13 2:12:21.852 PM diskmanagementd: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
ProductBuildVersion = 11C74;
ProductCopyright = "1983-2011 Apple Inc.";
ProductName = "Mac OS X";
ProductUserVisibleVersion = "10.7.2";
ProductVersion = "10.7.2";
11/26/13 2:12:24.000 PM kernel: USBF: 4608025.819 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/26/13 2:12:26.000 PM kernel: USBF: 4608027.819 AppleUSBEHCI[0xffffff800b205000]::Found a transaction past the completion deadline on bus 0x26, timing out! (Addr: 3, EP: 1)
11/26/13 2:12:47.314 PM installd: PackageKit: ----- Begin stage -----
11/26/13 2:12:47.372 PM installd: PackageKit: ----- End stage -----
11/26/13 2:12:51.657 PM com.apple.backupd: Backup failed with error: 2
11/26/13 2:17:48.811 PM SoftwareUpdateCheck: SoftwareUpdateCheck (Launch): launching app
11/26/13 2:17:49.547 PM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [52708] for authorization created by '/System/Library/CoreServices/Software Update.app' [52704]
11/26/13 2:17:49.547 PM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [52708] for authorization created by '/System/Library/CoreServices/Software Update.app' [52704]
11/26/13 2:26:38.000 PM kernel: IOSurface: buffer allocation size is zero
11/26/13 2:27:57.192 PM mDNSResponder: 133: Could not write data to client because of error - aborting connection
11/26/13 2:27:57.196 PM mDNSResponder: 133: DNSServiceGetAddrInfo v4v6 www-google-analytics.l.google.com.
11/26/13 2:27:58.000 PM kernel: IOSurface: buffer allocation size is zero
11/26/13 2:28:12.000 PM kernel: IOSurface: buffer allocation size is zero
11/26/13 2:31:10.000 PM kernel: IOSurface: buffer allocation size is zero
11/26/13 2:38:24.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=52749[GoogleSoftwareUp] clearing CS_VALID -
PI 7.3 - AEX "unable to read configuration data" and login problems
Hello Friends,
after installation of AEX, i'm facing some problems.
1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
Can somebody help me?
I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
Please let me know if I am not clear.
Edited by: Clarence on Feb 6, 2012 3:28 PM
Edited by: Clarence on Feb 6, 2012 3:28 PMhi,
>>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
if you have java stack only there is no exchange profile anymore...
https://weblogs.sdn.sap.com/pub/wlg/28334
Regards,
Michal Krawczyk -
Hi All,
Unable to clear vendor F-44, after selecting item and when simulating getting error as Posting is only possible with a zero balance; correct document.
The posted documents are old fiscal year document and the Clearing date is current date.
with regards,
Moderator: Please, avoid asking basic qeustionsHi,
Just check whether the Debit amount and Credit amounts are tallying or not.
Debit should be equal to Credit
Just check once again
Thanks
Edited by: nkonnipati on Feb 27, 2012 3:47 PM -
Unable to clear the invoice/credit in SAP via T-Code F-04
Hello Guys,
Unable to clear the invoice/credit in SAP via T-Code F-04.
While I proceed to Clear the cutomer open item i am getting below error.
" The Entry GB XX Is Missing in Table T059Q".
Kindly suggest what needs to be done to overcome with this message.
Thanks and regards,
Hemanth.Hi Hemanth,,
Hope you are using Classic WHT for your company code in country GB.
And the Classic WHT tcode XX was maintained in customer master data, but the same code would have been deleted from the system. Since these line items to be cleared also, stored that tax code only. So you are getting this erro in F-04.
So you need to create the above said tax code in OBA7 and then you will be able to clear the customer line items with F-04.
Regards,
Srinu -
Unable to clear vendor with different currency being posted
Dear Experts,
One of our vendor's Invoice billed in currency USD, several payments has been posted with different currency according to our Bank currencies. Full payment has been made to the balance of ZERO, but we still unable to clear this vendor account. Any expert can help me how to clear the above mentioned vendor.
Regards/LisaHi,
Please check whether the customisation for exchange difference accounting has been done. If so then
T Code is F-44 or F-04
Either use Local Currency. : In this case if there is any exchange rate difference between the invoice and payment date the difference will be posted to exchange diff account.
Or Use the Doc Currency : In this case you can provide the exchange rate in the transaction so that you will not get any exchange rate difference.
Hope this solves your issue.
Regards
MPI -
Unable to load provider data, syncing issues with update 9.1
Since the install of iTunes 9.1, I have had to reinstall it twice and still get the same issues:
1) Says "iTunes can not sync - disabled on this computer"
2) iTunes was unable to load provider data from sync services.
So I can sync songs, videos, and apps. But can no longer sync calender, contacts, etc... This all started right after the last update, up until then it was fine and no other program changes have been made on the PC.
Reinstalling / repairing iTunes does not resolve the issue. Any ideas on this?You are not alone that is the same issue I get. It then tells me it can not save the backup to my computer. *** is going on with the 9.1 update!
-
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
Model: Curve 8900
Provider: At&t
Platform: 4.2.0.108
I'm ready to throw this phone in the blender.... if I could only back up my data first. A couple of months ago the What's App application required an update. I updated it and ever since my phone has steadily had more and more issues. First, I kept getting this uncaught error message, shortly thereafter the 2 email accounts (both gmail) that I have linked to the account disappeared. The message icon shows that I have messages, but icons not there (I have tried the show all option). At one point the message icon started exponentially adding the number of messages until it got up to over 86,000. When I reboot the phone it goes back down and then steadily increases again... usually though it's more to 400 - 500 rather then tens of thousands. I have been trying to install updates and do a wipe of the BB so that I can start from scratch, unfortunately the application loader is unable to back up data. The desktop manager is unable to connect to the blackberry and indicates that an upgrade is required. I have tried doing the upgrade both directly from the phone and connected to the desktop manager, but nothing seems to work. If I try to upgrade the software directly from the BB, I get to the start download button and when I click, nothing happens. I have removed all applications except bberry app world and one game that I play, Pixelated Plus. Still nothing. Any ideas?Do you want to save the messages?
If not (and I think they are the problem) open the Desktop Software > Device > Delete Data and click the "select Data" option. Select the Messages to remove. Complete the prompts and finish.
Then, return to backup the entire device, and see if that is possible to complete this time with no messages.
Now, once the back up is done and you have your data, you can disconnect the device.
Now, use BBSAK to wipe the device and subsequently load the new operating system.
**If you cannot complete the backup again above, you might have to do without it, OR you can use the Desktop Software to sync your Address book, calendar, memos and tasks to Outlook. OR, you can easily install and use BlackBerry Protect to backup your device over the air to RIM servers, then once wiped and the new OS reloaded, you can use Protect to restore the data back to the 8900. << This you should do regardless.
Good luck, post back here as you have questions.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault. I was having a problem with it and turning it on an off got rid of that problem, but created this one. I've noticed that when I shut down the computer and filevault accesses the TM hard drive, it can back up.....but then when I'm logged on, or I want it to back up I get the error. I've tried fixing the drive, removing the in progress file and resetting the PRAM (i think that's what it was called). I'm starting to run out of options and have no other drive to back all this info on to reformat it.
I really don't want to loose all my stuff.
Please help!
Darianautical_stars wrote:
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault.
Usually this message happens when you replace an external disk that was being backed-up by Time Machine with another one of the same name.
Since File Vault works by making a sparse image of your home folder, and it's treated as a volume just as a HD is, that's probably what's happening here: the new sparse image has the same name as the old one, but isn't the old one.
First, consider whether you really need File Vault. It doesn't work well with Time Machine: you can't see or restore individual items in your home folder, and it only gets backed-up when you log out.
If you have a lot of other things, say photos, videos, and/or music that don't need to be encrypted, perhaps there's an easier way to secure our sensitive data. You can create an encrypted disk image via Disk Utility (in your Applications/Utilities folder), then copy the sensitive documents into it. Then the rest of your home folder is backed-up normally, and individual items can be viewed and restored in the usual fashion.
But if you do continue using FileVault, you may have to use TM to delete all backups of it, via the instructions in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That should then allow the new version of your encrypted home folder to be backed-up by TM.
Maybe you are looking for
-
Memory address range - Solaris 10
Hi All, Is there any command in Solaris 10 to know the memory address range ( hex) of each DIMM ? How to calculate the size of the module based on the address range ? Thanks in advance
-
Photo sync not working properly to my ATV
I am doing a custom sync -> selected albums -> and I chose specific events in the list. The album I select might contain 100 images, however only 3 sync (and the #3 appears in the events field in iTunes). What is keeping the rest of the photos from s
-
[XI 3.1] Import Wizard Error 21: RSS file does not exist
Hi, I would like to migrate from 6.5 to 3.1. I would like trasfer universe and reports with Import Wizard. But I receive this error: ERR21:Execute request to Cnx Server failed : RSS file does not exist : D:\Programmi\Business Objects\BusinessObjects
-
How to use SPLIT statements in SAP
I have a Variable which stores two field values like Purchase Order No and Date now I want to display this Value correctly from that Variable e.g VAR1 = PONO/Date How to print PONO on one line and Date on the other line from the VARIABLE VAR1.
-
I noticed that sice 11.0.07 there is a 64 bit version of the AcroPDF.dll called AcroPDF64.dll. Does this mean that I can use the PDF Browser Control in a x64 WinForms application? If so, what do I need to do to get this to work? When I right click on