Unable to clear find banner fully

In Safari 7.0.5, suppose I want to use the find banner to search for the word "progress."  It shows if I found that term.  I then clear it and close the find banner.  When I open it, it is clear, which is to be expected.  However, when I open a new tab and open a website, when I want to use the find banner on the new tab, the word "progress" shows up!
Not just that, but if I quite Safari fully and open it again, when I open the find banner, the word "progress" shows up.
When I want the field clear, I mean completely clear, such that when I open a new tab and/or open a new window, the find banner should be completely clear.
Right now, it is not good for those who want to find something once then clear it completely for the next session.

The reason why I am asking is for a way to clear the find fields fully without having to resort to restarting the Mac every time.
Are there any other way to clear the find fields fully without having to restart the Mac?
Update: All I have to do is to log out of my Mac account and log back in, which takes only 15 seconds to do.

Similar Messages

  • Unable to clear vendor open item.

    Hi experts,
    Have posted vendor document  under document type KZ directly, there is no open item invoice to clear the document.
    posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
    Vendor account entry
    25 vendor account 10000
    38 vendor account  8000
    50 bank account     2000
    document has been cleared only 8000 not 2000.  Please advice me how  to clear the KZ document.
    Regards,
    Anji Reddy.

    HI Anji Reddy,
    There is some Process to do Clearing function
    first of all Open item should be there in Vendor account with the Invoice.
    For that invoice there should be a payment which is full payment or else Partial Pament.
    Then you can do clearing function to clear the Open items.
    Through F-51 you can do both Payment and clearing which is Post with clearing
    if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
    Try to explain your senario more Clear so that your doubt can solve
    Regards
    Mahesh

  • Unable to clear file upload fields in web pages.

    When visiting any site which has the option to upload a file, I am unable to clear the field if I change my mind about uploading a file.
    A website has a BROWSE or UPLOAD field and button. Pressing the button brings up the open file dialog. I select a file and select open in the dialog. If I then click on the field containing the path/file, I am presented with the open file dialog. I cannot clear or edit the field on the web page.
    I originally thought it was something with the web page I visited, but then found another page did the same thing.

    For instance if you go to this page again in Safari,
    http://www.apple.com/quicktime/qtv/mwsf06/
    and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
    You will find this, which shows the url of the movie itself.
    <param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
    If you copy just this part:
    http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
    And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
    If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

  • ForgeComponent.cleanDirs unable to clear "processing"

    Hi,
    We're using MDEX 6.2.2 with PlatformServices 6.1.2 on a Red Hat Enterprise Linux Server v5.7.
    We've started facing a strange problem lately. While executing a baseline, it fails at Forge.getIncomingData. It fails while trying to move a sub-folder folder from data/incoming to data/processing. On further analysis we realized that the problem is being caused by the Forge.cleanDirs method. This method is meant to clear out the input-dir, output-dir and temp-dir configured for the Forge component. However, in this case, it is unable to clear the contents of the input-dir (data\processing). When this method is called, it simply skips cleaning this directory as if it is already empty.
    We checked the permissions on this folder didn't find any issues. The 'endeca' user is the owner and even with a 777 access, this method is unable to clear it out. However, we are able to clean it manually with the same user.
    We were able to fix this problem temporarily by deleting the 'processing' folder itself and then re-creating it. It worked fine for a couple of days and then the same error resurfaced.
    This problem is present is only on one specific ITL server in our environment.
    Any pointers would be greatly appreciated.
    Thanks.
    Warm regards,
    -Adi

    Hi Rohan,
    Welcome to SDN!
    This error means that you're trying to duplicate a record on the DB... check the IDOC  number ranges... it might help
    Regards
    Juan
    Please reward with points if helpful

  • Unable to clear "Check Paper" light PSC 1350xi

    Unable to clear "Check Paper" light
    1) Upgraded from XP to Win7 x32
    2) Installed HP PSC 1350xi Win7 driver software using Printer Install Wizard
    3)After many Print attempts, unable to clear "Check Paper" error message
    4) After several uninstall/reinstalls using several HP approved methods, all software diagnostics checked normal except for the blinking "Check Paper' light.
    5) And, yes, I tried adding, removing, adding paper to the tray which appeared normal.
    My guess is a hardware problem.
    Any suggestions?
    Thanks in advance.
    Bill

    Hi @wflint,
    Welcome to the HP Forums!
    I see that you are unable to clear the "Check Paper" light on your HP PSC 1350xi. I am happy to help!
    Please take a look through this guide, Blinking Lights on the HP PSC 1200, 1310, 1340, and 1350 All-in-One Printer Series. Scroll until you see, Issue: The Check Paper light blinks, then click on, Solutions, under Figure 19: The Check Paper light is blinking, and follow the steps.
    Hope this will resolve your issue, and have a wonderful day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • UD ICCO SPCO STUP- unable to clear the stock in Quality View.

    Hi!
                    In a QM -Module for a particular material status is showing as "UD ICCO SPCO STUP" in QA32. Usage Decision is done for this particular item. But it is showing the stock in MMBE Tcode. Its unable to clear in QA32.
    I tried QA12 and also QVM2 for this stock moving from Quality Inspection to Unrestricted stock. but i am unable to do so.
    Could any body plz help me to clear the stock from the Quality View.
    Thank you!
    -M.Suba

    Hi,
    Since lot status is "UD ICCO SPCO STUP", the stock posting against that lot is already done.
    Is batch management active ? is so then check whether you are getting  stock of that batch in Quality in MMBE.
    Chances of some other lot for same material  having status SPRQ are more, go to QA32 put specific material  and select all lots, then apply the filter to status field  and search for SPRQ status availability. You will find some lots of same material  for which UD given but stock posting not made.
    Please check and revert.
    Best Regards,
    Shekhar

  • Recent IOS7.1 cause a bug in my iphone5 as I am unable to clear Histroy of the Safari

    Hi,
    I am a user of Iphone 5 and recently did iOS7.1 upgrade, the immediate damage that I got is unable to clear the history from safari.
    Does any one know or heard of this issue and what is the fix for it?
    Best regards
    Apple user

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open - MSVCR80

  • Unable to clear Vendor f-44

    Hi All,
    Unable to clear vendor F-44, after selecting item and when simulating getting error as Posting is only possible with a zero balance; correct document.
    The posted documents are old fiscal year document and the Clearing date is current date.
    with regards,
    Moderator: Please, avoid asking basic qeustions

    Hi,
    Just check whether the Debit amount and Credit amounts are tallying or not.
    Debit should be equal to Credit
    Just check once again
    Thanks
    Edited by: nkonnipati on Feb 27, 2012 3:47 PM

  • Unable to clear open items for Bank GL

    Hi Experts,
    I have scenario where I am unable to clear bank clearing account through F-03.
    The Bank Clearing GL account master is NOT managed as "Balances in Local Currency only'
    Current issue is:
    Invoice is posted with USD currency
    Ex: $100 (1st April 2013, Exchange rate @ INR 50)
    The payment is posted in INR 4900 (1st December 2013, Exchange rate @ INR 49) .
    Here the balances in USD are clear with $100, but with difference in local currency which is posted as Forex gain.
    But while clearing the GL through F-03, the error is popping up ... "difference too large for clearing".
    Please help me how we can clear the balances of this GL (Which has two different currencies posted before clearing)
    Thank you.
    Best regards,
    Sri

    Hi,
    The message comes because of different document currency in Invoice and payment.
    In payment, your document currency is INR, so the system will calculate to LC1, LC2, LC3, cannot calculate back to your invoice currency, so even EUR amount is the same but the INR amount is still different.
                   Document currency     Ex Rate     Local Currency          Clearing currency
    Invoice          100EUR                   50               5,000INR                    5,000INR
    Payment      4,900INR                    1               4,900INR                    4,900INR
    If clearing currency is INR, even EUR amount is the same but you still have different in INR amount
    In my example, in F-03, when you choose the clearing currency is USD, and choose the open item list
                   Document currency     Ex Rate     Local Currency          Clearing currency
    Invoice         8,000EUR                                  10,000USD               10,992.40USD
    Payment    10,000USD                  1              10,000USD               10,000.00USD
    Screenshot in Local currency:
    Sceenshot in clearing currency: (different amount is 992.40)
    In this case, the system will created automaticall line item to Exchange gain/loss for different amount.
    You have to add one more line to offset this different amount.
    Example in my case, because of the different amount 992.40- is debit to Exchange loss by system.
    So now, I will add more line to credit  that amount again line below
    Julie

  • Unable to clear out the stock in SAP

    Hi Expert!
    Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old.  Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
    Thanks.

    hi
    do the physical inventory and adhust stock
    1) Create physical inventory doc using MI01
    2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
    3) Post the doc in Using MI07
    Note : Give the batch no if the material is activated the batch

  • Unable to clear Google search history in Safari

    I am unable to clear old searches in Safari.  None of the following has any effect: using the clear recent searches button, totally resetting Safari, deleting all history and cache and trying to delete each individual search item manually, or by changing default search method.  These are old items, not recent searches, but they continue to show up in the recent search area.  It appears to be a bug.  Any ideas how to REALLY clear out the search cache?
    THANKS

    Seem to have finally fixed it by deleting the safari plist entry.

  • Unable to clear customer line items for a particular company code

    Hello,
    For a certain company code, even though open items are present for some customers, i am unable to clear them using F-28 or F-32.I am getting the message 'No open item exists', Anyone come across this scenario before?

    Hi:
             Make sure you are giving proper selection criteria for the processing open item. May be the items are Special GL based transaction so you need to select special GL indicator to process open item. Please also refer to OSS Note 136754 - F-03, F-32, F-44, F-28 missing open items. Hope this will help you.
    Regards

  • Unable to clear the invoice/credit in SAP via T-Code F-04

    Hello Guys,
    Unable to clear the invoice/credit in SAP via  T-Code F-04.
    While I proceed to Clear the cutomer open item i am getting below error.
    " The Entry GB XX Is Missing in Table T059Q".
    Kindly suggest what needs to be done to overcome with this message.
    Thanks and regards,
    Hemanth.

    Hi Hemanth,,
    Hope you are using Classic WHT for your company code in country GB.
    And the Classic WHT tcode XX was maintained in customer master data, but the same code would have been deleted from the system. Since these line items to be cleared also, stored that tax code only. So you are getting this erro in F-04.
    So you need to create the above said tax code in OBA7 and then you will be able to clear the customer line items with F-04.
    Regards,
    Srinu

  • Unable to clear vendor with different currency being posted

    Dear Experts,
    One of our vendor's Invoice billed in currency USD, several payments has been posted with different currency according to our Bank currencies. Full payment has been made to the balance of ZERO, but we still unable to clear this vendor account. Any expert can help me how to clear the above mentioned vendor.
    Regards/Lisa

    Hi,
    Please check whether the customisation for exchange difference accounting has been done.  If so then
    T Code is F-44 or F-04
    Either use Local Currency. : In this case if there is any exchange rate difference between the invoice and payment date the difference will be posted to exchange diff account.
    Or Use the Doc Currency : In this case you can provide the exchange rate in the transaction so that you will not get any exchange rate difference.
    Hope this solves your issue.
    Regards
    MPI

  • Unable to clear a GR document via f.13

    Hi,
    My user is unable to clear a GR document via F.13 since the IR document had been clear with other document.
    It was noted that GR document do not have a matching document.
    User try to clear the GR document manually via F-03 by manual entering the clearing to offset but this leaves the clearing document as open.
    Please advise.

    Hi,
    Above credit entry in GR/IR account is at the time of GRN, and 2nd debit entry in GR/IR  account will be at the time of Invoice. see below entry.
    Debit GR/IR  690
         Cr. A/P(vendor) 690
    Therefore in GR/IR account is open item manage account, and you can see the debit 690 and credit 690, in GR/IR account, and this you have to clear in F.13 please check and confirm.
    You can also view the PO history in ME23N, to verify that the invoice is posted or not, and if invoice is posted, then click on invoice doc, then go on followup FI document, which will show you what account has been debit.(this should be GR/IR with 690).
    Your vendor invoice will be cleared once you it pay it through F110/F-53/F-58.
    Regards
    Javed

Maybe you are looking for