Unable to clear Inspection Lot

Dear Sirs,
I have a material with Inspection Type - 0101
The inspection lot of this material has the following status -CRTD,PREQ,CHCR,SPRQ,IRCH
Unable to clear inspection lot
in qa02 - insp specications tab -- while using Tasklist / Spec --> following message is coming
No Inspection Plan could be found
In samples tab -- sample size could not calculated
Please help

Dear
-In this case you create one inspection plan through QP01 for material code.
-Assigned the inspection plan through QA02 (At the time of assignment Key date should be current)
-Calculate the sample size by clicking over Sample tab and then Save the document.
-Status of inspection lot will get changed to REL.
-Proceed for the further transactions like QE11 to QA11
AYK

Similar Messages

  • Clear inspection lot for defect items

    Hi All,
    What is the process if i found the inspection lot have defect
    how do i create the notification .and result. after moved it to blocked stock.
    how can i close the nodification and change the result and do the ud for the lot.

    Hi
    What is the process if i found the inspection lot have defect
    If inpsection lot have defect then,You can go to defect recording & record the defect against operation or nspection lot or against a MIC.
    Every Defect has defect class which will decide whether the notification os to be kept open or close after UD is taken.
    This is part of customization.
    how do i create the notification .and result. after moved it to blocked stock.
    While creating inspection type in customization through QCC3--> Inspection lot creation >Idefine insp types->say 01 inspection type here maintain F2 type of defualt notification which will trigger after defect is recorded.
    You can record the results.Then from UD stock posting screen in QA11/QA32 you can post material to block stock.This is also possible through action box of notification.
    how can i close the nodification and change the result and do the ud for the lot
    Once Defect are reorded you can go to notification.Assign the Tasks to Users.Complete the tasks ^ sucessfuly close it.Check the status of all task must be TSCO TSSC.
    You need not to change the results recorded again after material is OK as this is First yield of the lot.
    Then move material form Block stock through notification. & close the notification.
    I hope this will help
    Regards
    Sujit

  • Unable to see Inspection lot stock tab in UD??? how to make it appear?

    Hello Friends
    Some how i am getting three unexpected observation
    1. Inspection lot stock tab in UD is not there.....how to make it appear so that i can do the quantity posting can be done.
    For your information this is against good receipt & QA32 quantity to be posted is showing the qty correctly.....which means stk is in quality
    2. In MMBE transaction i am not able to view batch & qty posting
    3  In MB51 i can see the document details but qty is showing in unrestricted....which means stk in unrestricted which contractdory to my first statement.
    Kindly let me know
    1. How to make Inspection lot stock table available in UD
    2 Any clue for 2 & 3 point if possible.
    Thanks & Regards
    Swanand

    Thanks for reply
    But the problem is not of stock going to quality or not.....anyway i checked it and it's correct.
    Problem is i am not getting Inspection lot stock tab in UD.......here this inspection lot is created due to good receipt (inspeciton type 01)
    My query is not yet answered
    Thanks & Regards
    Swanand

  • Inspection lot without batch no.

    Hi
    For 03 inspection type, inspection lot is creating without batch number, while doing UD it is asking for batch number.
    Client will give the batch number only at GR. Im unable to clear the lot.
    Please advise, how to create a inspection lot without batch number or clear the lot without batch number.
    Note: I used freely defined inspection points for 03 lot.
    Thanks&
    Regards
    Janardhanan

    Hi
    You need to apply SAP Note 146945 - Making usage decision for production lots w/o batch.
    Also with the above note, you need to mentain the below setting,
    In recipe
    Recipe header> Quality Management> Partial lot assign: Partial lot not supported
    Select Operation with QM active, go to details> Insp. point completion: Valuation
    Thanks
    Sachin

  • Problem with serial Number in Inspection Lot

    Dear All,
    I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
    *Stock data of serial number XXXXXX not suitable for movement
    Message no. IO231*
    All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
    Any Idea to rectify that problem?
    Thanks
    Edited by: Ashu on Aug 9, 2010 5:54 PM

    Hello,
    Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
    for inspection type 4 for GR of Production order.
    Regards,
    JayaVimal

  • Inspection lot generation during 322 movement type

    Hi Experts
    whenever we clear inspection lot from Quality we are having one issue first time user has given wrong UD code as Accepted,but that wasactually wrong,what he does is he will reverse the Lot through 322movement type,And again actually the material had to be sent for reprocess as shade is not matching,
    So the user will send the same material for Reprocess to Storage location-PF09.
    while doing 322 a new inspection lot is getting generated.while doing 322 movement why system is geenerating a new lot.Can we not make 322 in same inspection lot.
    Regards
    sandeep Patil

    Hi sandeep,
    You would have maintained inspection type -08 for making 322 movement type as otherwsie i dont think its possible to reverse the material to quality stock
    As you have maintained inspection type -08 so it will cerate a new inspection lot to execute 322
    Hope i have made it clear
    Regards,
    SVP

  • Inspection Lot not creating for 657 mvt type

    Hello,
    I am unable to create inspection lot for customer returns. Mvt type used by SD module for customer return is 657 ( to blocked stock). While sales to return order with this mvt type, no inspection lot is getting generated.
    But when returns are done with 651 mvt type (Returns to QI), I am able to create inspection lots.
    Can anyone tell me how to activate inspection for 657 mvt type as I want this stock to go directly to Blocked stock.
    Thanks in advance.
    Jason

    Dear,
    Quality inspection stock (movement type is  655)
    Blocked stock (movement type 657)
    If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
    Tcode vov6 - there will be schedule line category DN.
    go to details of DN.In Business data,check which movement type is assigned here change it to 655 and try.
    Also go to material master, select "Quality Management" view and execute. There click on "Insp.setup" and press "F5". Assign "06" under tbe tab "Inse.Type" and save.
    Now if that material returns from any customer, the stock will be blocked for quallity clearance. Only quality people can give clearance for that material.
    Regards,
    R.Brahmankar

  • Enter inspection lot number in Delivery

    Hi gurus.
    I want to enter inspection lot number manually in Delivery at item level  Processing Tab manually.
    currently its coming grey out so unable to enter inspection lot number in VL01N.
    Reg.
    Amol

    currently its coming grey out so unable to enter inspection lot number in VL01N.
    As per my knowledge ,when you do picking the Inspection lot automatically gets generate in the background.That is a reason it is Gray.Second thing is that this lot if you will open you will find the reference of the sales order,of which you are doing the delivery.
    So how can you enter it manually.
    You can not give reference of another lot.Not possible by any ways.

  • Enter inspection lot number in Delivery manually.

    Hi Gurus.
    I want to enter inspection lot number manually in Delivery at item level in Processing Tab manually.
    currently its coming grey out so unable to enter inspection lot number in VL01N.
    if i assign Inspection lot origin Z10 to Delivery type LF in  SPRO-> Inspection at Shipping & do required changes in Z10.
    Will that work???
    Reg.
    Amol

    currently its coming grey out so unable to enter inspection lot number in VL01N.
    As per my knowledge ,when you do picking the Inspection lot automatically gets generate in the background.That is a reason it is Gray.Second thing is that this lot if you will open you will find the reference of the sales order,of which you are doing the delivery.
    So how can you enter it manually.
    You can not give reference of another lot.Not possible by any ways.

  • Unable to clear stock in Quality Inspection

    Hi All,
    Few parts are in QI but we are not able to clear those parts. For those part we cannot find any open characteristic when viewed thru QE51, but when trying to give UD there is error ' Characteristic Open for the material".
    We have checked the Material Master, Quality Info record and Inspection plan for those materials but could not find any problem.
    Kindly guide what can be the reason for the characteristic not appearing during result  recording(QE51).
    Thanks & Regds,
    Ritesh.

    Hi ,
    Please check the follwing as well.
    1. Any characteristic in QE51N is a long term characteristic ?
    2. All characteristics show a green tick in the valuated inspection lot?
    3. As said above if its  a warning message ignore and proceed,or you could do a forced inspection completion
    4. If your MIC's are having a class characteristic-MIC relation,check this link is correct( IF its batch managed material and class characteristic assigned to a MIC)
    5.If all fine above, unlock the results recording and redo the valuation in QE51N
    Thanks
    George

  • UD ICCO SPCO STUP- unable to clear the stock in Quality View.

    Hi!
                    In a QM -Module for a particular material status is showing as "UD ICCO SPCO STUP" in QA32. Usage Decision is done for this particular item. But it is showing the stock in MMBE Tcode. Its unable to clear in QA32.
    I tried QA12 and also QVM2 for this stock moving from Quality Inspection to Unrestricted stock. but i am unable to do so.
    Could any body plz help me to clear the stock from the Quality View.
    Thank you!
    -M.Suba

    Hi,
    Since lot status is "UD ICCO SPCO STUP", the stock posting against that lot is already done.
    Is batch management active ? is so then check whether you are getting  stock of that batch in Quality in MMBE.
    Chances of some other lot for same material  having status SPRQ are more, go to QA32 put specific material  and select all lots, then apply the filter to status field  and search for SPRQ status availability. You will find some lots of same material  for which UD given but stock posting not made.
    Please check and revert.
    Best Regards,
    Shekhar

  • No inspection lot create in PM

    Dear PM Grue
    I am trying to create Inspection lot. I did all efforts but I am unable to create it. I assigned task list with order along with notification. Maintained 300 for inspection point for inspection Characteristic along with sampling. Also inspection type was attached 14. Assigned inspection type to order type Order was released and inspection lot was clearing (not gray). When I am creating it says No inspection could be generated for order xxxxxx. Is there any thing left over or any one helps me to find this error. MIC was maintained too
    Appreciated
    JA

    Hi Jamal Abro
    Please check whether you have maintained Master inspection characteristice. If yes please check it whether you have maintained it correctly.
    This will resolve your query. if not please let me know.
    Makarand

  • Report for inspection lots

    Hi All,
    Report for the inspection lots that clear UD but still in inspection stock( no posting is done).?
    Thnaks
    vbraj

    Dear Raj,
    Please try report QVM2.
    Best Regards,
    Anand Rao

  • How to do single usage decession  for multiple inspection lots

    we are clearing Usage decision each & every lot for which taking lot of time, if any setting for  a GR Document number/Multi GR document nos connected lots to be cleared at a time automitically,

    Hi,
    In addition to Anupam's reply,
    Follow the SPRO path for Auto UD---> Select your plant for AUTO UD settings -
    > then go to InspLot completion tab where you need to define following time fields under Automatic Usage Decision tab page :
    Delay time for skip lot (in Mins)
    Waiting time (hrs) & Waiting time (Mins).
    Waiting time is the time which must elapse after inspection lot creation after that only system will carry out automatic usage decision.
    Save above settings.
    Further as a master data part, you need to maintain tick in Automatic UD check box for the respective material for which you want activate automatic UD.
    Hope this clears your doubt.
    Revert if still any query.
    Regards,
    Tejas

  • Inspection Lot creation for the 103 movement type

    <<Don't ask for or offer points>>
    Dear Experts,
    we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node   Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
    Kindly let us know what settings need to be done in order to achieve the same.
    Full points will be awarded for the reply
    Regards.
    Edited by: Matt on Sep 18, 2011 4:44 PM

    Hi,
    If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should  have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
    This check box is available in the inspection type set up in the Material master.
    Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
    Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
    Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
    http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
    Regards
    Hari

Maybe you are looking for