Unable to clear out the stock in SAP

Hi Expert!
Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old.  Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
Thanks.

hi
do the physical inventory and adhust stock
1) Create physical inventory doc using MI01
2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
3) Post the doc in Using MI07
Note : Give the batch no if the material is activated the batch

Similar Messages

  • Maintain the Stock in SAP problem

    Hi,
    In my Business Process (Textile Industry)  First they will receive the Material from the Customer (GRAY Material) after 2 or 3 months customer will give the Program for the Material
    In this how we can maintain the Stock in SAP and also while Raising the Sales order how we are going to track that particular customer material GRAY

    Hello prasanna
    In my Business Process (Textile Industry) First they will receive the
    Material from the Customer (GRAY Material) after 2 or 3 months customer
    will give the Program for the Material
    In this how we can maintain the Stock in SAP and also while Raising the
    Sales order how we are going to track that particular customer material GRAY
    The business process as cited by you is not clear, could you please rephrase and explain clearly the business scenario so that it will be easy to provide suggestion ?
    Best Regards,
    Sarthak

  • RS&R Process - To take the Stock in SAP

    Hi SAP Gurus,
    How to handle the Repair Service & Recondition (RS&R) material in SAP. For Example we are procuring PAC Compressor / SMPS Module / Controller (Which can be repaired and use again). First time we are showing the consumption with original value.
    After repair & recondition How to take the stock in SAP & How to show the consumption with Rs.1 or 0 Value. So that we can track those items in SAP wothout affecting the moving average price.

    Hi,
    Generally, Repair of Materials are handled via concept of Gate Pass (Returnable & Non-Returnable). But, SAP doesn't provide any option for creating Gate Pass (Returnable & Non-Returnable) in standard.
    Try the below suggested procedure as a work around process;
    Repair Process (Reconditioning) via Returnable Gate Pass: -
    1. MM01 - Create Material Master for every Spare Part / Machinery to be sent to Vendor for Repair (Reconditioning) as Non-Valuated (Material Type "UNBW") (Do not extend Accounting and Costing views since you don't require postings of Stock value and consumption values, you only want to track the Service/Repair Charges)
    It's not necessary to have materials as Non-Valuated always, it depends on your requirement.
    2. MIGO - Goods Receipt > Others (Receive the quantities of these materials using Movement Type 501 / 511) - Only if Stock of Material is not available.
    3. ME21N - Create Subcontracting PO (Here Main Material and Component will be same material)
    4. MB1B - Transfer Posting w.r.t. Subcon PO (Mvmt Type - 541, Spare Part stock will get posted to Vendor Stock)
    5. MB90 - Take Print out of this Material Doc as Returnable Gate Pass (U need to configure Message Determination of Inventory Mgmt)
    6. MIGO - GR against Subcon PO (101 - Receive Spare Part, 543 O - Consumption of Spare Part form Vendor Stock)
    7. MIRO - LIV for Service Charges w.r.t. Subcon PO
    8. MIGO - Goods Issue > Others (Do GI of Subcontracted Material using Movement Type 502 or 512)

  • Clearing out the Cache

    I have been working on a huge project where I needed to export everything to the client from XDCam EX1 to a Standard Def 16x9 timecoded stock demo reel. Now my computer is saying it is running low on space on the C: drive when the project is not on the C: drive. I found GIGS of data hidden in a Cache directory and I'm trying to find out how to delete the cache files without just going in and deleteing the directory. Is there a setting in Adobe to clear out the old cache files?

    File/preferences/media - clean

  • I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    Settings > wi-fi  then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
    Now at the top tap on "forget this network".
    After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

  • HT201317 I add all photos taken on camera roll to individual albums. However, once a photo is deleted from camera roll, it's also deleted from the albums where it also resides. Is there a way to delete or clear out the camera roll but keep them in albums?

    I add all photos taken on camera roll to individual albums. However, once a photo is deleted from camera roll, it's also deleted from the albums where it also resides. Is there a way to delete or clear out the camera roll but keep them in albums?

    See this discussion...
    https://discussions.apple.com/message/20971818#20971818
    From the  More Like This  section on the right

  • How to find out the cost of SAP user for a particular user id

    Dear All,
    I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
    Could you please advice me regarding this.
    Raghu

    Hello Raghu,
    I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
    Could you please advice me regarding this.
    I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
    Regards,
    Sarthak

  • How do I add a number from one field to another then clear out the first field

    In a form I am creating I have a field or a series of fields that have variable numbers in them. I would like to create another set of fields that when I click on a button (or some other method) will add whatever number is placed in another field to that first field.
    For example:
    Text1a is normally a variable field. I have another field (text2a)  that I input another number into. I normally add these two numbers together manually and the total replaces what was in Text1a.
    Text1a = 4, I enter in a 2 in Text2a, so now Text1a will become a 6. I would like to have it so that when I click on a button it automatically adds the two numbers together and then replaces the current number in Text1a with the new total and also clears out the number in Text2a.
    Note: Text1a and Text2a are columns where the next filed down is Text1b and Text2b and so on.
    Can someone please help me on this?
    Bruce

    If you have a nanoSIM that is for your cell provider just activate it and it should set it up.

  • Want to clear out the phone to sell

    Just went with another wireless provider for my new Palm Centro, so my Treo 700p with Verizon is no longer useful.  I have someone who is interested in buying it from me.  Should I do a hard reset to clear out the phone so that she can start from scratch, or can I just somehow clear out the calendar, documents, contacts, etc. and leave the software in place?  We're in real estate and use third party lockbox software, some mapping programs, etc. and I'd like to leave that kind of stuff in the phone so she doesn't have to put it all back on.  Suggestions?
    Post relates to: Treo 700p (Verizon)

    Hi..  Welcome to the Palm forums. Short of a hard reset the only way to delete your calendar, contacts etc and leave 3rd party programs would be 1 item at a time which I'm sure would be very inconvient.  I would recommend doing the hard reset, for instructions if needed go to kb.palm.com article id 887.  Third party programs normally require a registration code and to pass yours on to someone else would be in violation of the licensing agreement for that software. 
    Post relates to: Centro (Sprint)

  • Are you supposed to clear out the all document section, which seem like a big garbage can?

    Are you supposed to clear out the all document section, which seem like a big garbage can?

    Eh? Documents is a folder. You keep your documents in it. Or do you mean this thing...
    That's the Trash, it's where you put stuff that you no longer want.
    Yes, you are suppose to empty it occaisionally.

  • If I choose a hard drive ask my backup disk for time machine, will it clear out the data that was previously stored in my hard drive?

    If I choose a hard drive ask my backup disk for time machine, will it clear out the data that was previously stored in my hard drive?

    Hello edjhsu,
    Unless the drive is in a format that isn't compatible with Time Machine, the files will not be overrwitten. However it is typically a better idea to keep your files and your backup separate, especially since files on the Time Machine drive will not be backed up by Time Machine.
    Mac Basics: Time Machine backs up your Mac
    http://support.apple.com/kb/HT1427
    Cheers,
    Allen

  • Trying to figure out how to clear out the spool area for my HP printer on my 2009 IMac?

    HP advised that I should clear out the spool area for my printer.  How do I do this?

    Hi patricia m.
    I'm sorry to hear that you are encountering difficulties in clearing the spool area for your printer. It is rather "windows-centric" language as Mike indicated.  I believe that HP Support would have been referring to resetting your printing system and I have included a document on how to do that.
    If you find after resetting your printing system that issue hasn't been corrected, please post some additional information and I would enjoy helping you resolve things.  I would need to know what model/product number of HP Printer you have, the version of Mac you are running, how the printer is connected (wireless, USB) and the issue you have encountered.
    Macintosh: Resetting the Printing System in Mac OS X
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01371980
    Happytohelp01
    I work on behalf of HP

  • How to Clear plant level Stock in SAP-EHS_Waste management

    Hi Experts,
    I implemented business practices 855 and 938 in a sandbox environment and a part of the waste processing is not clear for me.
    How do clear the waste from my plant in MM? The best practice asks to create a purchase order, to validate it and to invoice it. The waste is still in my plant!
    Thanks in advance.
    Regards
    Manglesh

    Hi Manglesh
    In waste management there are several options:
    - You can control inventory management or not; if you do it, you need to post and clear the stock of your waste.
    - You can control batch management or not; if you do it, you need to post and clear the stock of your waste using batches.
    - You can control warehause management or not; if you do it, you need to post and clear the stock, and to put in and to take out the waste in a location in the warehouse.
    In waste management there isn't a direct link between the purchase orden and the inventory management, the stock moves aren't visible in the PO history. If you are usisng inventory management, first you post the waste, second you create a purchase order (someone will manage your waste, and you must pay for it); when a transporter take your waste, then you clear your waste (there is a function that you need to customizing to do it).
    Regards
    JCD

  • How do I clear out the measure data in a 10g cube?

    Does anyone know of an OLAP feature that I could call to zero out the measures stored in the cube before I refresh from the source data?
    I'm new to Oracle OLAP, but I have some experience with Essbase and I have quite a bit of experience with Oracle PL/SQL. The database is 10g.
    Here's my problem. My dimensions and cube are mapped to Oracle tables. I've built an Oracle procedure, using DBMS_LOB / xml_clob functionality, to refresh my cube. The procedure worked successfully to initially load the data. It works successfully when changing the dollar amounts in source data. But it's possible that a record in my source data can be totally removed. When this happens, the dollars from the removed record are still showing up in the cube total after the procedure executes. I had assumed the CleanMeasures="true" parameter would take care of this, but it is not.
    thanks,
    Nancy
    Here's the parameters I'm passing to BuildDatabase in my Oracle procedure:
    ' <BuildDatabase Id="Action2" AWName="BUDGET.BUDGETS" BuildType="EXECUTE"
    RunSolve="true" CleanMeasures="true" CleanAttrs="true" CleanDim="true"
    TrackStatus="false" MaxJobQueues="0">';

    If you are doing a reload every time then you can issue following commands to clear data from cube.
    lmt name to all
    allstat
    clear all from <cubename>prttopvar
    You can wrap above commands in pl sql procedure using dbms_aw.execute package and execute it before cube load starts. Instead of clearing it from whole cube you can clear only from one partition also. Just take a look at clear command in olap DML 10.2 reference.
    Thanks,
    Brijesh
    Edited by: Brijesh Gaur on Aug 10, 2010 6:47 AM

  • Clearing out the old iPhone

    I want to clear out my 3G before activating my 4. If I "restore" my 3g and then connect to my 4 will I:
    1) Clear out all of the data on the 3G and
    2 Be able to download all of my data and apps and numbers to the 4

    Sync your new Iphone4 with Itunes (do a restore to your new phone, it will ask) It will make your new Iphone 4 just like your 3G in regards to Pics, IPod, Content, Text Messages, mail, etc.
    Then you will need to wipe your 3G manually by going into setting and selecting "reset phone"
    I wouldn't reset your 3G first by any means, that's a good way to lose everything. Do it last after you make sure your Iphone4 is the way you like it.

Maybe you are looking for