Unable to close PO

HI all,
We are on SRM 5.0 ECS.THe flow is : Ext PR-->created SC in SRM >PO>GR-->INV
We are trying to close some PO's but get the foll error:
Document item "PR #/Item #" has not yet been carried forward to the current year
Posting in fis. yr 2011 is not possible; in FM ope n doc."PR#" in fis. yr 2009
Please advise.

Are you doing JIT processes? Are you using DIMP Automotive ? If yes, then it could be caused by a bug which is fixed with OSS note 1634429 - VL09: Goods movement reversal scenario with warehouse
Are you eventually still in release 45A or B? In that case this error can be fixed with 137983 - Error in WM when reversing GI for delivery
At least it is not normal that this error message comes up.
As said it maybe caused that the info in the delivery does not fit anymore to the current warehouse setup, or by a program bug. You may need to contact SAP as this needs a deep analysis

Similar Messages

Unable to close the posting periods in MM

Hello
while using MMPV the system says that the date not current calender year. If I check OMSY the open year is 2002.I need to know that how you close the open periods of previous years.I am supposed to close all the periods one by one but how to close them for the year 2002.
I tried to initialise the periods as well but the system asks me to check OSS notes 487381 before initialisation.
Please guide me as I've read all the threads related to this error but still unable to close the periods.
Thanks & Regards
Ashish

Hi,
You need to close the periods one by one from 2002. There is no other way.
Go to OMSY check what is the current period,
e.g it is 02/2002.
then got MMPV,
Enter 03 and year as 2002 then execute, repeate till 12/2002,
then again start MMPV from 01/2003 to 12/2003. you have to perform this till current period of 2008.
Thanks
Edited by: anand k on Aug 20, 2008 12:44 PM

Unable to close some custom forms

Hi Gurus,
We did application migration from Hp-Unix to Sun Solaris. Oracle apps 11.5.10.2 with database 10.2.0.4 and application working good with few issues.
Issues:
1. Few custom forms ( message Forms) unable to close. If we close by clicking X mark on top right corner, it does not close can just minimise.
2. Couple of Custom forms does not open even we have .fmx in the custom folder.
Need some suggestions on this issues.
Thank You.

f60gen module=ARXCUDCI.fmb userid=apps/apps output_file=/ul01/app/applmgr/lasrx/au/11.5.0/forms/US/ARXCUDCI.fmx
Compiling ON-DELETE trigger on CODE_ASSIG_HIST data block...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger on BP_CLOSE item in CODE_ASSIG_HIST data block...
No compilation errors.
Compiling WHEN-NEW-ITEM-INSTANCE trigger on CURRENT_RECORD_INDICATOR item in CODE_ASSIG_HIST data block...
No compilation errors.
Compiling WHEN-MOUSE-UP trigger in FOLDER_PROMPT_MULTIROW property class...
No compilation errors.
Compiling WHEN-BUTTON-PRESSED trigger in FOLDER_OPEN property class...
No compilation errors.
Created form file /ul01/app/applmgr/lasrx/au/11.5.0/forms/US/ARXCUDCI.fmx
Thanks You.

Unable to close iPad2 attachments

I am brand new to the apple community, so please bear with me for the newbee question.
After configuring my brand new iPad2 yesterday to sync with my mail provider, I opened an email attachment and I am unable to close it.
When I press and hold the top of the attachment a keyboard dropdown appears, but there is nothing else on the page.
When I go back to the main menu and re-open email, the attachment is still there and I can't access the mailbox.
Can someone point me in the right direction?
Thanks

When you tap on the attachment-while it is open-do you not see a blue "Done" button in the upper left corner? If so, tap it to close the attachment.
If the mail app is frozen, you can force quit it and restart the iPad.
Force quit the app by holding down on the sleep button until the red slider appears. Let go of the sleep button and then hold down on the home button until the app quits. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or just quit the mail app this way and restart.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Unable to close windows

I didn't find any other threads on this problem, so evidently it's just my system?
A few days ago I installed the latest Tiger security patch (2007-009), Java 6 update and Quicktime 7.3.1 update.
Since then I am unable to close ANY window in Safari. Safari seems to work fine otherwise. I can browse and open tabs and windows, and websites can create new windows, but then I can not close ANY of the windows. I can close tabs but not windows. When I click the Close button, nothing happens, and when I use ⌘+W, nothing happens.
So, after a while of surfin' the 'net, I end up with a bunch of open windows of various sizes. When I re-open Safari, I get one new window with the Home tab.
I just recently began using Safari again, because it's 3x faster than Firefox on my iBook, but now I've got this problem.
Any ideas?
I will likely be calling Apple Support today, although I hate to, as I've found them to be very unknowledgeable and unhelpful in the past.

Hi,
Go to these 2 locations to see if you have any 3rd party extensions and move anything present in them onto your Desktop to deactivate them:
/Users/YourUsername/Library/InputManagers/
/Library/InputManagers/
Restart Safari to pick up the change. If it works now, you can try moving the items back one by one until you find the culprit.
If that doesn't help, or you don't have those folders, one quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)

Unable to close WeatherEye box due to Error 500

when opening, the "weatherEye" box is now blank with only "Error 500 Internal Server Error"
                                                                                         Guru Meditation
                                                                                          XID 991114007
                                                                                          Varnish Cache Server            displayed at the top and I am unable to close box. Help?
with many thanks, sarahjulie

http://www.weather-eye.co.uk/faq.asp
Also, iMacs don't run iOS. They run Mac OS X, Linux or Windows. Please update your signature with the Mac OS X version that someone might be able to help you. Go to Apple menu -> About This Mac.

Unable to close the order

I am unable to close the order ...system hown this error messgae please any one guide me in this issue
Unprocessed future change recs for order 1002655 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 1002655. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations
Regards
GSD

Sesidhar gollu,
Well try to reprocess your order by using T-code COFC which will reprocess the future records. Try this and then ping me any questions if u have.
Regards,
Madhu.G

Unable to Close project

We are unable to close the project because it is created for plant xxxx that was never used and is wrong anyhow.
When attempting to close the Project xxxxx we get message stating that Purchase orders are open.
By listing all PO's applicable to the project (SAP trans ME2J) we get a list of approx 25 purchase orders, some of which have the lines deleted, some of which are open. Our problem is that the Purchase Orders are all set up for Plant "xxxx". and xxxx does not exist as a plant!! SAP will not allow us to dealt these PO's without changing the plant reference but we cannot because these parts are not set up in other plants!

Hi,
How did you save the Project with the Plant which doesnot exist ??
By the time your Project was created the Plant must have been operational in SAP & MM team might have removed it afterwards (if the system allowed)
is this right??
If so, then you can cross check with MM how to proceed to close / delete the PO line items.
regards

Unable to close Safari windows

I am unable to close any windows in Safari.
I am able to expand and minimize them.
I had been unable to open Safari which I resolved by removing the Safari preferences file and have tried repeating this as well as resetting Safari and running general maintenance proceedures such as permissions, scripts, etc. with no success.
Is it possible to reinstall just Safari ( mine is version 2.03) or can this only be done through a system update?
Thanks for your help!
733 MHz Power PC G4 Mac OS X (10.4)

After attempting various fixes and several unsuccessful attempts at using the 10.4.7 combo updater I was finally able to update to 10.4.7 from my Tech Tool eDrive.
Somewhere along this process, I think after the System update, my window problem was resolved.
Thanks.
733 MHz Power PC G4 Mac OS X (10.4)

Unable to Close the book in Firefox

Hi,
I am Unable to Close the book in Firefox when WebHelp Pro
application is opened through the robo server 7. When i open the
help application all the books will be opened and they cannot be
closed by clicking on them. But if i open the same file i.e.,
projectname.htm directly inside the program
file/adobe/roboserver..... it opens fine with all the books closed
and can be opened on click.
Adding to this each contextual call to the WebHelp pro is
opening in a new window in Firefox 2.0.0.12. But all these works
fine with ie7. Can anybody help me out in this regard?
Thanks,
Arun

This sounds pretty similar to an issue that I am
experiencing.
Basically in IE5 on Windows 2000, IE6 and IE7 on Windows XP,
the table of contents appear as required - all books are not
expanded, and once the user clicks on a book, the book is expanded.
However in IE7 in Windows Vista and in Firefox on all Windows
platforms, the table of contents appears with all books expanded,
and when clicking on a book, the book will not collapse.
However if the same page is directly navigated to (e.g.
http://servername.com/dir1/index.htm)
the table of contents appears correctly (all books collapsed and
users able to expand and collapse a book by clicking on it).

Unable to close web page using Safari 7.3.1

Doing research and opened a page that required my name and password. No idea what's going on and unable to close page even after force quitting Safari and restarting computer.

Try starting Safari with the shift key held down.

I downloaded a book but now it won't open. Also I am unable to close ibooks. Can anybody help?

I downloaded a book and now it won't open. Also I am unable to close ibooks. Can anybody help?

Hi marthaciffone,
Thanks for using Apple Support Communities. I would recommend first forcing iBooks to quit to see if that helps:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If the issue continues, most of the remaining troubleshooting steps in this article are applicable and might help:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Cheers,
- Ari

My ipod is telling me there is not enough storage and I cannot back it up as there is not enough icloud storage. I am unable to close the message or go onto settings.

my ipod is telling me there is not enough storage and I cannot back it up as there is not enough icloud storage. I am unable to close the message or go onto settings.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then delete some stuff

Unable to close Modal dialog box

Hello Friends,
I am displaying a list in a Modal Dialog box. When I try to close the Modal dialog box. It is not getting closed.I have defined a gui status for this modal dialog box. PBO and PAI Coding is given below .
module STATUS_0300 output.
SET PF-STATUS 'STATUS_300'.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0 .
IF p_week IS NOT INITIAL.
    WRITE : text-009 COLOR 1.
ENDIF.
IF p_month IS NOT INITIAL.
    WRITE : text-010 COLOR 1.
ENDIF.
LOOP AT g_t_wkmon_error INTO g_s_wkmon_error.
    WRITE :/ g_s_wkmon_error-matnr,
             g_s_wkmon_error-period,
             g_s_wkmon_error-quantity.
ENDLOOP.
LEAVE SCREEN.
endmodule.
module USER_COMMAND_0300 input.
CASE ok_code.
WHEN 'OK'.
   LEAVE PROGRAM.
ENDCASE.
endmodule.
Thanks in Advance.
Hari

Hi,
Check the below thread
Re: Unable to close modal dialog box
" Make sure you select the Radio Button DIalog BOX Typ while creating the Status in PBO
You can use SET SCREEN 0 In the above Thread
MODULE user_command_0100 INPUT.
CASE ok.
    when 'CANCEL'. " You Standard GUI options shown in The GUI Screen
      SET SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
module STATUS_0100 output.
SET PF-STATUS 'ABC'. " This is of type Dailog Box type
* SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_0100 OUTPUT
Hope this would resolve your Issue.
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Apr 16, 2010 1:16 PM

Unable to Close the Purchase order : You cannot post acquisitions to asset

Hi All
Purchase order unable to close due to asset being capitalised and captured in last FY.
We are getting the below error message.
You cannot post acquisitions to asset 125782
Message no. AA394
Diagnosis
You want to post an acquisition to this asset. However, according to depreciation key Z620 that was used, acquisition postings are only possible in the year of the initial acquisition or of the capitalization date.
Procedure
Check the asset number, the asset value date and the transaction type. You have to create sub-numbers for subsequent acquisitions using this depreciation key. However, these sub-numbers cannot adopt their depreciation start date from the main asset number.
Please help us to resolve the issue and how to close the Purchase order.

Hi,
Please notice that error AA394 may be displayed correctly due to customizing settings of the depreciation key in transaction AFAMA when setting field XNAZUG (Acq.only allowed in capitalization year) > YES
The only workaround is to change your settings regarding field 'Acquisition only allowed in capitalization year'   > NO
Also have a look at SAP Note No. 211283 to understand how the flag operates.
I hope this helps to clarify.
Kind regards,
Brigitte

HT4211 I am unable to close my computer...the message on the ipad says not enough icloud storage and go to settings. Unable to go to settings and it is frozen and unable to close down.

I am unable to close my computer...the message on the ipad says not enough icloud storage and go to settings. Unable to go to settings and it is frozen and unable to close down. How do I fix this for the button won't turn it off?

Don't try to turn the iPad off until you reboot.
On your iPad, Did you try holding down on the sleep and home buttons at the same time until the Apple logo appears? If you didn't try it, go ahead and do it. Wait until the Apple logo appears on the iPad screen before you let go of the buttons.

Unable to close PO

Similar Messages

Maybe you are looking for