Unable to close tab after opening website

cannot close tab after opening website

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Similar Messages

  • Unable to close tabs after a new tab is opened automatically and suddenly

    Recently, after the latest update, this problem has been occurring quite often. When i am using multiple tabs, the browser will suddenly open a new tab automatically. The new tab is empty. When i try to close the tab, it cannot be closed. i tried closing other tabs that i was using but they too cannot be close. i have to restart the browser and the problem will be solved. But the problem will resurface after awhile of using multiple tabs again. The problem is more frequent when i am using more tabs.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Photoshop CC, Flash CC, After Effects CC, Dreamweaver CC all Closes right after opening????

    I have tried everything on the forums, but every time i open Photoshop, Dreamweaver, flash, after effects all with CC paid membership closes right after opening them. I have read the forums searched in the internet, update and downgrade the drivers on graphic card, sign in and out the adobe creative cloud, The one thing i notices is that when i open Photoshop in the notifications on my windows, it appears in the notifications that i register my product on adobe with ID but i have entered my Id with billing information an all when i click to continue it goes sign in then back to the address??. And in my products shows i have membership cloud, don't know what to do anymore! I have even uninstall the program and clean everything with adobe cleaning tool. I don't Know what to do!!!

    Have you found a solution, I am having same problem

  • Final Cut Express HD (3.5) closes right after opening?

    Hi,
    I believe years ago I had this same issue and it was as simple as deleting the preferences (??).
    Basically, what's happening is I just installed FCE HD (3.5) on my G4. I meet the system requirements to run the application AND Soundtrack Pro and LiveType open and run fine. FCE closes immediately after opening and then I get an error: "The Application Final Cut Express Quit Unexpectedly."
    Any ideas?
    Thanks!

    Yeah, sorry for being so confusing. That's exactely what I did. Since my main HD is 500Gb and my secondary drive is 120Gb, I just copied all the necessary files to the 500, formatted the 120, reinstalled OSX, and booted to it. The intention was to let the FCE software think it was installing on a fresh drive (which, it was).
    However, even then it won't let me install FCE. Just LT and Soundtrack. ?? I'm a bit confused because the system requirements for Soundtrack and LT are the same for FCE.
    I'm trying to install it on a Dual 1.25ghz G4 Quicksilver with 1.5Gb Ram. ??
    The funny thing is I WAS able to install the complete program initially when I got it. I had a previous copy of Final Cut Express (1) on my main drive. I ran the FCE HD installer, and the program installed just fine. However, it kept closing right after it would open. I figured it was a preference conflict between the newer version (3.5) and the old version (1.1). So, I've done my best trying to erase all evidence of FCE ever being on the drive and still get nowhere ??
    Thanks!

  • WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?

    WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?

    HAVE YOU UPGRADED PAGES, WHATEVER VERSION THAT MAY BE BECAUSE YOU HAVEN"T TOLD US, TO THE LATEST VERSION WITH SOFTWARE UPDATE…?
    AND WHY IS YOUR CAPS LOCK STUCK DOWN?
    PETER

  • Diary app closes directly after opening

    The diary app closes short after opening .. what is happening ?

    You mean the "Calendar" app?
    What are you syncing Calendars with? Perhaps you have a corrupt one.

  • Why am I unable to select within the URL bar of a new tab after opening a .pdf file in Firefox 4?

    To repeat the problem:
    1.) Open a .pdf file in Firefox 4
    2.) Open a new tab by using the (+) tab button
    3.) Try to select within the URL bar (unsuccessful)
    I cannot seem to direct my browser to a new website in a new tab after viewing a .pdf file within the browser.

    Restore your default toolbar by going to Customize - Restore Default Set. I just found it out myself.

  • Why am I unable to close tabs all of a sudden?

    I had a lot of trouble installing the latest Firefox update. It finally worked after 7 or 8 attempts. Now I can open new tabs but clicking "close" or right clicking and selecting "close tab" no longer works.

    I'm not sure if it's the same problem, but it seems related to a Website's code. After login out of the system, the tab is no longer available or accessible. It doesn't show the page. I can only click on the tab itself (trying to close it through the menu or the X icon), but the page does not appear. Not even with the Group Tabs add-on the tab is visible. It just skips it as if it did not exist. I'm using FF 4b portable.

  • I new V5 cannot close tabs without opening a blank first, why?

    Hi,
    Firefox 5 update installed 2 days ago. Now tabbed browsing opens new sites but I cannot access the x to close tabs until I open a blank tab after which the x appear in the other tabs. I do have colourful tabs installed.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Set the pref browser.tabs.closeWindowWithLastTab to false on the about:config page to prevent closing the last tab from closing the browser and make a close button appear if only one tab is open.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.

  • Unable to close tabs

    Hi,
    Recently, tonight, I've noticed issues trying to close tabs. Clicking the 'x' does not work, going to file - > close tab, nor does Ctrl+W. I think earlier I had to open the task manager to shut down the program.
    Extensions/add-ons I am running are personas, Norton IPS, Norton toolbar, and Adblock Plus 1.31. I am running Windows 7 on a 3 months old laptop. All updates should be current.
    The only thing I have installed tonight is Google Earth. That might have been a reinstall... or an over install. I actually noticed some issues with that earlier as well but I can't seem to remember them

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in to the account that has the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t wohrk in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
    In safe mode, test again. Same problem(s) now?
    After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

  • Close tabs and open links in new tab with middle click

    Until recently I was able to close tabs by middle clicking them or open new tabs by middle clicking them. Recently however Firefox either is no longer recognizing my middle clicks or is not processing them in the same way.
    I tried looking in the about:config functions for functions including 'middle' in an attempt to find the configuration option for this but didn't find anything. I need to identify how to configure it first so I can attempt that.

    I have this problem as well, and tried basically everything. Even a fresh install (didn't help). I have this issue (using the same Logitech LX3) since I switched from Firefox 3.x to 4.x and now 5.x, all on Windows 7.
    Basically, the middle mouse button behavior is totally unreliable. Most of the times, it doesn't work at all. However, sometimes it does, but then it may take up many seconds (keeping the middle button pressed) until the tab finally opens... and then it often opens multi. Sometimes the tab(s) open after X seconds while the middle mouse button is still pressed, sometimes it opens after the button was released.
    It seems to be a bit better in Private Browsing mode, though. Can't really be more specific: sometimes the middle mouse button opens the new tab after seconds in "using tab x, page y, link z", while it doesn't work on exactely that same page on "using tab x, page y, link z" after doing nothing for 5 minutes.

  • Acrobat CC CS6 closes shortly after opening

    To add to my problems in Creative Cloud CS6 - Acrobat, today everytime I open a pdf it stays open for about 10 seconds and then automatically closes. I have never experienced this before. Is this more of the new & improved version?
    This just started today.

    So, this thread sounds similar to your problem... these people describe a pdf opening, closing immediately, and after that Acrobat will not run anymore. (May or may not be the same problem you're having). Here is the solution from that thread:
    "OFFICIAL FIX FOR THIS PROBLEM --- THIS IS WHAT I GOT DIRECTLY FROM ADOBE SUPPORT --
    Please view transcript
    Raghu: Hi Matt .
    Raghu: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
    Raghu: I  understand that you are unable to open Acrobat X on Windows 7.
    Raghu: Am I correct ?
    Matt Lok: yes but it worked before
    Matt Lok: and all the other apps on the cs6 master suite works
    Raghu: Okay, I'll be glad to assist you with that.
    Raghu: Please navigate to C:\program files(X86)\Common files\Adobe\Adobe PCD.
    Matt Lok: ok
    Raghu: Open Cache folder.
    Matt Lok: ok i see 1 file - cache.db
    Raghu: Please move it to desktop.
    Matt Lok: ok done
    Raghu: Please open Photoshop from CS 6 suite.
    Matt Lok: ok i opened the x64 version of photoshop
    Raghu: Click on 'Help' > 'deactivate'.
    Matt Lok: ok it's deactivated
    Raghu: Please close it and open it back and activate it.
    Matt Lok: ok i signed in to the adobe account and then it launched photoshop
    Matt Lok: deactivated is greyed out
    Raghu: Okay fine, please open Acrobat X now.
    Matt Lok: ok i opened it and now it said 30 day trial
    Raghu: Do you have the option for 'License this software' ?
    Matt Lok: yes
    Raghu: Click on that please.
    Raghu: Any issues ?
    Matt Lok: i just did the activation
    Raghu: Okay please let me know if any issues.
    Raghu: Are we still connected ?
    Matt Lok: yes
    Matt Lok: just testing
    Matt Lok: it seems to be ok
    Raghu: Great.
    Matt Lok: but is this a permanant fix
    Matt Lok: or do i have to do this again later
    Raghu: Please close Acrobat X and open it to test once again.
    Matt Lok: seems to be ok now
    Raghu: This is a permanent fix Matt.
    Raghu: Acrobat X will work without any issues.
    Matt Lok: ok great
    Raghu: No need to worry about it.
    Raghu: Is there anything else I can help you with?
    Matt Lok: that's about it, everything else works 100%. Thanks again for helping
    I hope this helps you out,
    Michael

  • IDVD 7.1.2 closes right after opening in OS 10.9.5

    I have a 27-inch iMac (Mid 2010) with a 2.93 GHz Intel Core i7 processor, 16GB 1333 MHz DDR3 Memory and a 1TB SATA Internal Hard Drive.  I have the most current issue of iDVD (7.1.2) which worked fine when I created a DVD on August 24, 2014.  I then upgraded my OS to Mavericks (10.9.5) on September 24, 2014.  On October 12, I attempted to make a DVD from a short video I had taken and iDVD closes or crashes 10 to 15 seconds after opening.  This leads me to believe that for some reason it is not compatible with Mavericks.
    I am wondering if this is the case or if there is a fix for this.  If not is there another DVD creating program available in the App store that would work as good or better that I could purchase to solve this dilemma.

    Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/Preferences folder.
    2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

  • Premiere CC closes right after opening it.

    Everytime i try open Premiere, photoshop or after effects they immediately close out without any warning or explanation. I also have lightroom from the cloud and that works perfectly. There are no error messages all of the programs simply just close right after they open. I have the programs installed onto a different drive as well, not sure if that help out with anything. Help! I bought these programs i'd like to use them to continue working!!!!

    See my reply in your other message Lightroom is the only program that will run

  • Creative Cloud closes right after opening.

    Hello.
    My creative cloud apps close right after I open them.
    For an example I'll take photoshop. I click it, I get the photoshop logo.
    After the logo disappears I get the Photoshop screen. But it only remains open for a few seconds, and then closes right after.
    No error messages, no warning, it just closes.
    It's not just PS, every app I have installed has the same reaction.
    I have tried:
    The font thing I found on here. - Didn't work
    Reinstalling the apps - Didn't work
    Reinstalling Creative Cloud - Didn't work
    Windows 7
    Intel(r) Core(TM) i5-2450m CPU @ 2.50GHz

    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Mylenium

Maybe you are looking for

  • Is it possible to change settings in "Help System info"?

    Is it possible to change Photoshop settings by clicking on Help and then System info? Since there is the possibility to type and the OK-button, I just started wondering.

  • I want to connect my G5 at home with my G5 at work through Internet

    I want to connect my G5 at home with my G5 at work through Internet. How do I do that? Thank you

  • Can't burn Audio CD's using any software

    Hi I've been having problems burning audio CD's using my mac for a while now, i started gettin ghte 4251 error in itunes on MacOSx and XP sp3 with bootcamp, and now i cant burn CD's using any software, it burns the first song then comes up with an er

  • TDS payment for salary

    Hi Can pls explain me the scenario for the TDS salary payment. Other than salary, the section can take care from creating remittance challan and bank challan...........what is the procedure for salary tds. regards

  • Browser prompting for update. Already on 7u45

    I just got thrown into being the one to handle Java updates were I work when 7u45 came out so I am completely new to this world. We use static installs and then run uninstall scripts remotely. Here is the command we use for all of our Java installs.