Unable to Close the Purchase order : You cannot post acquisitions to asset
Hi All
Purchase order unable to close due to asset being capitalised and captured in last FY.
We are getting the below error message.
You cannot post acquisitions to asset 125782
Message no. AA394
Diagnosis
You want to post an acquisition to this asset. However, according to depreciation key Z620 that was used, acquisition postings are only possible in the year of the initial acquisition or of the capitalization date.
Procedure
Check the asset number, the asset value date and the transaction type. You have to create sub-numbers for subsequent acquisitions using this depreciation key. However, these sub-numbers cannot adopt their depreciation start date from the main asset number.
Please help us to resolve the issue and how to close the Purchase order.
Hi,
Please notice that error AA394 may be displayed correctly due to customizing settings of the depreciation key in transaction AFAMA when setting field XNAZUG (Acq.only allowed in capitalization year) > YES
The only workaround is to change your settings regarding field 'Acquisition only allowed in capitalization year' > NO
Also have a look at SAP Note No. 211283 to understand how the flag operates.
I hope this helps to clarify.
Kind regards,
Brigitte
Similar Messages
-
Buyer is unable to view the purchase order in advance search screen
Hi Experts,
I have an issue, the issue is when a shopping cart is created by the requisitioner and got approved, following document purchase order is created.
When buyer is trying to view the purchase order in advance search he could not view the purchase order.
Zero results found message is populating when buyer wants to retreive the purchase order, buyer wants to delete the purchase order, but he is not able to view the purchase order in advance search.
Can anyone among you let me know what can be done to acheive this.
Your quick help is highly appreciated.
IGAHi Summer,
I have checked the status of the PO and it is in ordered state, I am able to view the PO because i have local admin role productin support role.
But when buyer is trying to retrieve the PO it is not happening even though the user has buyer role.
regards,
IGA -
Unable to Receive the Purchase Order
Hi Experts,
A PO is created with 44 units of a material. the 44 units are divided into 4 batches.When trying to do the goods receipt, it id not first prompt for any serial numbers.
Hence went ahead and did the goods receipt. But could not receive the PO yet.So cancelled the Goods receipt by doing the movement type 102.
When it was checked, the material in sending plant has a serial number profile assigned to it
and also the batch management has been checked.(in mm03) . So assigned the serial number profile in the receing plant too.
but it did not help.
can you suggest any possible solution for this?I did not understand your story.
And I do not really know how you want it to be.
you are talking about sending plant and receiving plant, is your PO a stock transport order or just a standard PO?
do you use SD shipping or just MM movements to transfer the quantity between both plants?
do both plants belong to the same company or different companies?
you are talking about batches. batch managment can be activated at plant, mateial or client level, which level do you use?
if plant level, then the same material can be batch managed in one plant but not batch managed in the other plant.
you said you did the receipt, but did not receive the PO, then cancelled the receipt. this is a real weird sentence. Has this anything to do with your problem?
you are saying you are unable to receive the PO, I guess you talk about the quantity and a receipt in reference to the PO. Do you get any error message which prevents you from receiving.
you actually said you have done the recipt and cancelled it, so what do you mean by "unable to Receive" ? -
Need to Reverse and Close the Purchase Order.
Hi,
I need a PO to be closed at the current invoiced
amount.I GRNd the whole amount, but need this reversed and the PO
closed. Pls let me know the ways to achive this.
Thanks
Rakesh.Question1: I need a PO to be closed at the current invoiced amount
If do not want to process the current invoice then please select the "final invoice" indicator
in invoice tab in purchase order tab (ME22N - transaction)
Question2: GRNd the whole amount, but need this reversed and the PO
Once you cancel the material document invoice will get revese automatically and NO need to do MR8M
The histroy will be updated in purchase order histroy.
Hope it will helps to you ||
Thanks/
Shrinivas -
Hi All
i want to close the Purchase order for which very small % quantity is open.
Ex:
PO qty is : 100 kgs
GRN Qty is : 95 kgs
inovice Qty is : 95 kgs
i want to close this PO becose , i am not expecting an GRNs.
How can we do this, can any tell me.
Regards
M S KHi,
You can give delivery completed indicator in PO, but it will not control further GR. So you can block the line item, so that further processing of PO will be avided.
Regards,
Prabu -
How to Close Service Purchase Orders
Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh PanchalHi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil -
I am unable to close the order ...system hown this error messgae please any one guide me in this issue
Unprocessed future change recs for order 1002655 prevent del. flag/completion
Message no. CO688
Diagnosis
There are still future change records or error records to be processed from the confirmation for the confirmation processes in order 1002655. Possible confirmation processes are:
Automatic goods receipt
Backflushing
Calculation of actual costs
Data transfer to HR
System Response
You are not meant to set the deletion flag/'completed' status for orders with future change records that have not been processed.
Procedure
You should process the open future change records using
Predefined confimration process or
The CORUPROC program, by dispatching it in Customizing in a background job (dispatch background jobs: dispatching processes).
Check if incorrect goods movements or incorrect actual cost calculations exist for the order, and reprocess these if necessary:
Reprocessing incorrect goods movements
Reprocessing incorrect actual cost calculations
Regards
GSDSesidhar gollu,
Well try to reprocess your order by using T-code COFC which will reprocess the future records. Try this and then ping me any questions if u have.
Regards,
Madhu.G -
The purchase order cannot be created on Hold
Hello gurus,
I have a doubt, when I want to create a purchase order (transaction ME21N) adopting a purchase requisition, the button "Hold" dissapear.
Any reason why the button "Hold" is missing when adopt the purchase requisition to the purchase order?
I need to save the purchase order on Hold after the adopting, but, I cannot find the button.
Could you help me please a.s.a.p.?
Regards,
Sandra PalomoSee the info below:
Deactivate 'Hold' Function for Enjoy Purchase Order
Use
Application component: MM-PUR-PO-GUI
Function group: MEPO
The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an
Enjoy purchase order can be put on hold or whether this function is to be
suppressed in accordance with your requirements.
In the standard system, this function is generally offered during the
creation of an Enjoy purchase order (transaction ME21N) and when a PO
that is on hold is changed (transaction ME22N).
Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
Standard settings
o In the standard system the Business Add-In is not active.
o The BAdI is not filter-dependent.
o The BAdI cannot be used multiple times.
Example
You will find an example implementation under Goto -> Code Example.
In this example, the following behavior is defined:
In the case of stock transfers within a company code, the "Hold" function
is generally inactive. If an application object contains an error of any
kind, the function is likewise inactive. -
my ipod is telling me there is not enough storage and I cannot back it up as there is not enough icloud storage. I am unable to close the message or go onto settings.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then delete some stuff -
Cannot query AR invoices based on the purchase order number in R 12 1.3
Hi,
We need to query invoices based on the purchase order number, However when we try to Ct+F11 get the message *"Please fill in selective criteria in at least one of the following fields for performance reasons: GL Date, NUmber,Bill to etc."*
Is this a new feature or a bug?
Thanks and Regards,
MPHHi All,
I found the solution in the following note.
*How to prevent Blind Query or Query on Non Indexed Column in Transaction, Receipts, Collections forms? [ID 753222.1]*
Thanks and Regards,
MPH -
Process to CLOSE-OUT Purchase orders.
Hi,
Would anyone be able to share the process they follow to close-out Purchase orders which are open ?
Thanks,
RBAllen,
Thanks for your inputs. Below
1. Goods receipt the total quantity for all lines - this would be the normal way that the PO is closed - Agree with you on this.
2. We do not use the last delivery checkbox on the confirmation document because eventually if a PO needs to be opened for some reasons we cannot later on.
3. Incase of partial confirmations and closing open PO's there have been issues in the past with deleting the line. For some reasons, the PO had to be opened again, line item had to be undeleted and this did not seem to work quite well.
4. Another way to close a PO is -Go to the PO line items and flag the 'No further confirmations expected' indicator for every line and re-order the PO.
This will remove the commitments in backend. If a PO needs to be re-opened later (for some odd reasons) it is just a matter of unchecking the indicator (for that line) 'No further confirmations expected'. Would be nice to get your inputs on this.
Thanks
RB
Edited by: Rajeshree Bhatiya on Mar 15, 2010 5:17 AM
Edited by: Rajeshree Bhatiya on Mar 15, 2010 5:20 AM -
"Unable to complete the purchase of the" and "Purchase failed"
I can not buy name Bag of Gems in the game Clash Of Clans because in the game show. "Unable to complete the purchase of the" and "Purchase failed"
We are all just users like yourself, and cannot "fix" anything.What is the exact message you are getting? Are your credit cards in order?
-
Is there anyway to view the purchase order information foreach transaction
hi sap techies
Currently the FAGLB03 does not display the vendor related information for transactions coming through as a goods receipts (transactions processed by receiving dept) and/or related to purchase orders. Is there anyway to view the purchase order information for each transaction? For example, we cannot see vendor code/name, po #, etc.HEllo,
FAGLL03 displays information from the line items of the accounting documents. If the information you want to display exists in tables you can display. But if the information you want comes from other tables you cannot display.
As a workaround you can check the SAP note 1034354 which tells you how to add the offsetting accounting information and then you cna display some of the information you want. To do so you can create your own coding into a BADI implementation.
REgards,
REnan -
How to set up automatic payment for the purchase order
Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advanceEither you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text -
Unable to cancel - open purchase order where all items are removed
Hi all,
When We try to cancel/close open purchase order where all items are removed from item master ?
It showing error message,
"No matching records found 'Items' (OITM) "
Purcahse order was created on may-2007.
As purchase order showing in open item list.
Any solution for this problem ?
JeyakanthanSAP does allow items to be removed from the item master with open documents, but only if the documents have not created journals.
It does create headaches though, and this situation is one of them.
If there are not many items, I suggest you recreate the items, close the PO and just cancel the items rather than remove them.
The other workaround is to change the items on the PO to something different that is in the item master, then close it.
Maybe you are looking for
-
I am unable to properly print a playlist in the jewel case format. All lines bunch together. I have no problem with other print formats. Help please.
-
Time out error while syncing Iphone on Vista
My Problem: - PC running Vista Home Premium and latest Itunes (8.2.1.6) - Syncing with Ipod Nano (4. gen) works without problems While Syncing my new IPhone 3gs Itunes properly creates a backup and syncs apps and music bought/installed on the Iphone
-
WDPortalNavigation.navigateAbsolute() does not work in QA environment
I have used WDPortalNavigation.navigateAbsolute() to navigate to a different iview in the portal. It works fine in Dev, but the same code is not displaying the iview in QA environment. I confirmed that I views exists in QA and it executes from the
-
Why is my volume button not working
hey i was listening to music on my iphone in my car via a headphone jack and i had accidently unplugged it by pulling on the cord, anyways i soon found out that my sound on my iphone was virtually locked up , the only time i can hear any sound from t
-
Problem in creating follow-on document (RFQ) for a bid invitation.
Hi Experts, We have an issue while creating follow-on document(RFQ) for a bid invitation. Process is as follows : We have a bid invitation and sent it to two vendors. After this, created two responses one is accepted and another one is rejected. Now