Unable to collect Update/Transfer rules Info & Data sources from BI content

Hi,
We are tyring to activate Infoprovider 0PY_CO2 from BI content by selecting the option - In data before. BI is unable to collect all corresponding objects such as Update rules, Info source, transfer rules and the data source for the selected Infoprovider. Only Info area and associated info objects are being collected for the installation.
We are experiencing same problem whilst acitvating most of the info providers. However, in some cases, either of these objects get activated but not all the necessary objects that feed data to the Infoprovider (cube or multi provider).
Also, Infopackages and Info object catalogs are not being collected for any objects activated/installed so fare from the BI content.
We are trying to activate BW 3.5 content on the BI 7.0 environment. BI Content release is 703 and support pack level is 008.
Kindly share any pointers to troubleshoot this probelm please.
Thanks
Venkat

Shiv,
For some Info providers, all associated info objects(including transfer & update rules and info source and data sources) are getting collected and got successfuly installed. But this is true for only 10% of the Info providers that we have installed so far.
Remaining all the objects, we are unable to proceed further.
Thanks
Venkat.

Similar Messages

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

Transform Update/transfer rules into DTP in Standard Business Content

Hi all,
I have a new installation of BI 7.0, and we are massively going to use Standard BC delivered by SAP.
I received an input from to transform all Update/Transform rule contained in the Standard BC, into DTP.
First of all I noticed that in the area of interest for our scope the DTP delivered with the standard content are a very small percentage of the all Standard BC (area HCM, FIN, SC). Is it possible?
Second I have to perform ana analysis on impact/benefits/consequence of performing this transformation. We tried already, but we had some errors, and we had to stop.
Can you please help me?
Many Many Thanks
Valentina

TR/UR will be migrated to Transformations not DTP - DTP is jst like an Infopackage which loads data from PSA to Datatargets.
Migrate TR/UR before you Migrate datasources.
Migrate datasources with WITH EXPORT in RSDS.
Change the Routines accordingly to OO ABAP.
There is no standard BC for Transformations and DTP's.

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

How to debug a transfer rule during data load?

I am conducting a flat file (excel sheet saved as a CSV file) data load. The flat file contains a date field and the value is '12/18/1988'. In transfer rule for this field, I use a function call to transfer this value to '19881218' which corresponds to BW DATS format, but the monitor of the InfoPackage shows red error:
"Value '1981218' of characteristic 0DATE is not a number with 000008 spaces".
Somehow, the last digit or character of the year 1988 was cut and the year grabbed is 198 other than 1988. The function code is (see below in between two * lines):
FUNCTION ZDM_CONVERT_DATE.
""Local Interface:
*" IMPORTING
*"     REFERENCE(CHARDATE) TYPE STRING
*" EXPORTING
*"     REFERENCE(DATE) TYPE D
DATA:
c_date(2) TYPE c,
c_month(2) TYPE c,
c_year(4) TYPE c,
c_date_combined(8) TYPE c.
data: text(10).
text = chardate.
search text for '/'.
if sy-fdpos = 1.
concatenate '0' text into text.
endif.
c_month = text(2).
c_date = text+3(2).
c_year = text+6(4).
CONCATENATE c_year c_month c_date INTO c_date_combined.
date = c_date_combined.
ENDFUNCTION.
Could experts here tell me what's wrong and also tell me on how to debug a transfer rule during data load?
Thanks

hey Bhanu/AHP,
I find the reason. Originally, I set the character length for the date InfoObject ZCHARDAT1 to 9, then I find the date field value (12/18/1988)length is 10. Then I modified the InfoObject ZCHARDAT1 length from 9 to 10 and activated it already. But when defining the transfer rule for this field, before the code screen, click the radio button "Selected Fields" and pick the filed /BIC/ZCHARDAT1, then continue to go to the transfer rule code screen, but find the declaration lines for the infoObject /BIC/ZCHARDAT1 is as following:
InfoObject ZCHARDAT1: CHAR - 000009
    /BIC/ZCHARDAT1(000009) TYPE C,
That means even if I've modified the length to 10 for the InfoObject and activated it, but somehow the transfer rule code screen always takes the old length 9. Any idea to have it fixed to take the length 10 in the transfer rule code screen defination?
Thanks

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Problem with delta update on customised export data source.

Hi all BW gurus,
I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
Does anybody have some idea on this?
I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
And how do others do for executing delta update of the customised data source?
Thanks a lot!!
The utility program of <Z_CHANGE_DELTA_PROCESS>:
=================================================
report z_change_delta_process .
*P_DATAS DataSource
*P_DELTAP Delta Process for DataSource
parameters:
p_datas type roosource-oltpsource,
p_deltap type roosource-delta.
tables:
roosource.
data:
ls_roosource type roosource.
if p_datas(2) ne 'Z_'.
   message 'The DataSource needs to begin with ''Z_''.' type 'E'.
endif.
select single * from roosource into ls_roosource
       where oltpsource = p_datas
       and objvers = 'A'.
if sy-subrc eq 0.
   ls_roosource-delta = p_deltap.
   update roosource from ls_roosource.
message 'The DataSource has been updated successfully.' type 'I'.
else.
   message 'The DataSource entered is not valid, try again.' type 'E'.
endif.

Doesn't anyone have any idea on this topic?
Appreciate for all the help. Thanks.

Error while transporting data source from Dev to QA

Hi , I am transporting 0glaccext hier data source. I created the transport with the the transfer rules and the corresponding Infopackage. when I collect the transfer rules I have 4 transfer structures present in the transfer rules which are
" 0GLACCEXT_T011_HIER_BA1" BA2 , BA3 and BA4. when I am importing the data source, I am getting the following error messages
"Mapping between data source 0GLACCEXT_T011_HIER and source system QASCLNT400 is inconsistent"
and then
"Reference to transfer structure 0GLACCEXT_T011_HIER_BA1 not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 0GLACCEXT_T011_HIER_BA1 should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 0GLACCEXT_T011_HIER_BA1 is on the same transport request. Use the transport connection to create a consistent request."
Any suggestions on how I need to handle this issue.
I am able to load the data succesfully in Dev and I am not have

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Install Info Object 0BSTAT from business content

Hi Guys,
I am trying to install info object 0BSTAT from business content , i have selected the options
grouing "only necessary obects" "start automaticall" "Hierarchy" ad dragged info obect from left side into collected objects and selected the install and trasport option form Install, assigned the trasnport also, it didn't give any errpor message but info object is not getting activated.
An body had the expericence with this issue, please share you ideas how to fix the issue.
Thanks
Best regards
Shekar Gunda

Thanks for your reply Matrin.
I looked at the log
Log is:
Installation of: Onfo Object (IOBJ)
You onl have authroization to display info object 0BSTAT
Transfer/Merge of the content version (Object Type Infoobject)
Activation of obects with type Info Obect
Saving Objects with type Infoobject
Transferring the 1 objects from type IOBJ took 0.4 seconds
Post-Processing of objects after activation
The post-processing lasts 0.0 seconds
Object IOBJ 0BSTAT was written to order/task EWD*******
You onl have authroization to display info object 0BSTAT
I looked at the SU53 also there is one error message related to info object BSTAT
Currently aunthorization Field ACTVT Activit is "23"
Does this mean i don't have autorization to install of info obects, do wee need any special activity is required in the for installing info object
Please suggest me how to proceed.
Thanks
Best regards
SG

How to use Sql data source from Essbase 9.3.1

Hi All,
How to use Sql data source from Essbase 9.3.1 for ASO cube.Are there any rules and limitations for that.
Do we need to create any data source connection for this purpose. If there please let me know the dteps to create that connection.
Regards

Yes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
Create DSN
Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
There you have to enter the details of the DSN connection and SQL query to build/load.
Thanks,
Prathap

Access odbc data sources from PL/SQL

Dear All,
I would like to know is there any way where i could access odbc data sources from pl/sql (i.e i would like to insert, update records into MSAccess table from pl/sql procedures, triggers). Would appreciate any help regarding this.

The only way I know of how is to write and external function library and use that to access ODBC datasource ...if someone else knows something else I would be interesting in hearing about that also.

Error in generating data source from planning area

Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.

Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen.

Bug in Config Data Source Parameter on Content presenter

Hi all,
I find out a bug when we configure Data Source parameter on Content Presenter at run-time.
Example:
I configure the value for Data Source is:
${'SELECT * FROM ora:t:IDC:Profile:TinbaiProfile WHERE ora:p:xmNgayxuatban < TIMESTAMP \''}${pageFlowScope.utilsBean.strCurrentDate}${'\''}
and Data Source Type: Query Expression
Then Click OK to save my configuration and close the popup
After that I came back the Component Properties: Content presenter dialog to configure more parameter. And I saw the value in the Data Source is:
SELECT * FROM ora:t:IDC:Profile:TinbaiProfile WHERE ora:p:xmNgayxuatban < TIMESTAMP ''}${pageFlowScope.utilsBean.strCurrentDate}${''
If I do anything else and click Apply or OK, it will alert the error message "Error: Error Parsing..."
It's really a bug of this component. I known it happen from version 11.1.1.6.0 and hope the next version it will be fixed. But now is version 11.1.1.8.0 this bug still here .
In my opinion Oracle should do more and more for a good produce with high value as $ for buying their produces and services
Thanks!

Thanks DanielMerchán!
I have one more question about the error when I config the JOC for the manage server where my portal application is deployed.
After finish config JOC for my manage server as the link Configuring the Distributed Java Object Cache - 11g Release 1 (11.1.1), my portal application can't run anymore. Check the log I saw the error:
<Sep 17, 2013 4:59:17 PM ICT> <Error> <oracle.as.cache.groupv2.HttpHandler> <BEA-000000> <CO-0 Invalid HTTP request information: GET /ubck/faces/vi/vimenu/vipages_trangchu HTTP/1.1>
Do you know why? I do something wrong
Thanks!

How To change UME Data source from Abap to Java.

Hi Experts,
Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap.
Regards,
Siva

Siva,
Please search before you post a question.
This has been discussed many a times in here. Please refer to this [thread|To change ABAP UME database to Portal database;.
Good Luck!
Sandeep Tudumu

Unable to collect Update/Transfer rules Info & Data sources from BI content

Similar Messages

Maybe you are looking for