Unable to complete this operation error
Hi,
I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be appreciated because I would like to use Firefox.
Thanks,
Phil
Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Cannot load large CSV files in SignalExpress("Not enough memory to complete this operation" error)
Hi guys,
I'm new here and just have browsed
some of the related topics here regarding my problem but could not seem
to find anything to help me fix this problem so I decided to post this.
I currently have a saved waveform from an oscilloscope that is quite
big in size(around 700MB, CSV file format) and I want to view this on
my PC using SignalExpress. Unfortunately when I try to load the file
using "Load/Save Signals -> Load From ASCII", I always get the "Not
enough memory to complete this operation" error. How can we view and
analyze large waveform files in SignalExpress? Is there a workaround on
this?
Thanks,
Louie
P.S.>I'm very new to Signal Express and haven't modified any settings on it.Hi Louie,
Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application.
Best regards,
Victor
NI ASEAN
Attachments:
Clipboard01.jpg 181 KB -
"Not Enough Memory to Complete this Operation" Error using notifiers in LabVIEW
I get the (windows?) error message "Not Enough Memory to Complete this Operation" when using notifiers to send a flattened byte string as a response from one VI back to my calling VI. I do get my data and everything works out perfectly between the two VIs, but I do get this annoying error message that requires a user interface action. Why?
Well, I'm thinking you may have stumbled across a LV issue. I can get it to crash a lot faster than that when I clear your plot history in the top chart. It definitely seems as though LV has a huge memory leak on charts having their history cleared. With your 500,000 data point history, I lose about 170MB of memory every time I clear the chart history.
When I run your VI, the first time you plot data, I see a 170MB jump in memory, which I am assuming is the chart allocating its chart buffer. But, then I continue to see more memory being used as more data is collected (if you don't use your default 1 sample a sec rate, you can see this happen much faster - I am using 5k sample rate and 5k samples). Eventually, even without clearing the chart history, this will cause the system to crash.
I did a quick test and dumped the waveform and just used doubles and plotted that. Memory usage is drastically better, as I see no memory leak during standard acquisition (I still see the memory leak when the chart is cleared however).
You may have to rewrite to not use the waveform and signal for your chart and just use DBLs. -
Why are the videos I have downloaded not able to play.when I go to play them the message says unable to complete this operation
The iTunes Store will direct you to the same article. As Hackintosh said, first delete the track from iTunes, allowing it to move the track file to the trash. Then in iTunes on your Mac, sign into your iTunes Store account and go here:
In the window you'll be taken to, make sure that the Music tab and "not on this computer" are selected, then locate the defective track in the list and click this button next to the track name:
Regards. -
I'm working on some BI mashups to demo the powerbi offerings to potential clients, but I get close to 20+ crashes a day relating to memory issues
I'm utilising powerquery to import and filter data from 2 rss feeds. Each are at most 100 rows. I then add these to a powerpivot model & have two powerview reports over this.
I've added a powermap to the solution but find the reliability to be very poor. If it does manage to work the colours of the bubbles and bars sometimes don't match the defined colours or they're black (a telltale sign of memory problems in windows). This
usually breaks the whole excel 'process' and I can't save the workbook. I get "workbook not saved" errors or that "there was a problem saving with all the features added. Click continue and save as a different file"
either that or i get a hard crash like I did while writing this post:
Problem signature:
Problem Event Name: APPCRASH
Application Name: EXCEL.EXE
Application Version: 15.0.4535.1507
Application Timestamp: 52282875
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18229
Fault Module Timestamp: 51fb1116
Exception Code: e0434f4d
Exception Offset: 0000c41f
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 3081
Additional information about the problem:
LCID: 1033
skulcid: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Memory amount is not a problem according to resource manager; excel process taking ~500mb and 70% free ram. I left memtest86+ running overnight and it found no errors in 8 passes so it looks like my sticks are ok. I have sql server 2008r2 & 2012
along with all the bells (db engine, ssis, ssas) installed and that never gives me hard memory failures even when I drive it hard. Obviously if i try to process a data model that's too big it gives me out of mem errors but that's expected and it doesn't crash
SSDT or the SSAS\Tabular instance. The services are off while I'm doing the excel powerbi work.
laptop specs are :
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Manufacturer Dell Inc.
System Model XPS L521X
System Type x64-based PC
Processor Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2101 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Dell Inc. A15, 1/08/2013
SMBIOS Version 2.7
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
Time Zone Cen. Australia Daylight Time
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 7.88 GB
Available Physical Memory 5.67 GB
Total Virtual Memory 15.9 GB
Available Virtual Memory 13.6 GB
Page File Space 8.00 GB
Page File C:\pagefile.sys
I can upload the workbook too if desired
I dont solely blame powermaps, rendering the powerview reports is pretty hit and miss in all the workbooks i've developed before as well, but clicking the Maps button in excel is certainly the biggest gamble
Jakub @ Adelaide, AustraliaHi Jakub,
I can think of two changes you can make that can help.
1. You don't mention what architecture your office version is. I would suggest you use 64 bit Excel. It has a higher memory threshold and performs much better when using a lot of memory.
2. Install all of the latest CU updates for Office. There has been dozens of bug fixes for PowerPivot and Power View since the last release.
You mention you can share the workbook. Feel free to send to me at
[email protected] and I would be willing to take a look and see if the crashes are known issues or already fixed.
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties. -
Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
RajHi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Error 0x800706b9 (2147944121) Not enough resources ae available to complete this operation
Every time I try to install my new printer, or when I used my old one, I keep on getting this message. I've tried everything from starting the spooler to editing the registry key but nothing seems to work. It seems to be an internal problem because the two printers I tried both had this issue.
Could someone please help?Hello Raisinette434,
Welcome to the HP Support Forums!
I understand that you are unable to install software for either a new printer or an old. Judging by the error you have mentioned, "Error 0x800706b9 (2147944121) Not enough resources are available to complete this operation", my first thought is that there is not enough memory on the computer to met the minimum requirements.
What is the model of printer? Also, the error seems to be one from a Windows Operating System, is this correct? If so, what is the version of Windows, including version, e.g. Windows 7?
Hope to hear back.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Layer Comps To Files - Export error: Could not complete this operation. There are no user slices
I have been using the Export Layer Comps To Files scrips that ships with Adobe Photoshop CS5 for a while and found it very useful, apart from the numbers it automatically adds as a prefix to the layercomp name.
A friend pointed me in the direction of a altered version of this scrips which removes the numbers and only exports the layer comp name, gerat I thought. Not great! After using this successfully for a while the scrip started to throw up errors whenever I attempted to export. Either "No layer comps found" or "Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices." As I knew there were layercomps for the first error and knew that I had not created any slices for the second error I was pretty miffed. Fortunately I had the foresight to make a copy of the original script from the Photoshop presets library.
I have since deleted the offending script out of my presets folder and copied the original script back in however the error still persists. I constantly receive Adobe Save for Web & Devices Error: Could not complete this operation. There are no user slices. I have searched the forums and around the net to try and find a solution for this problem but none seem to present themselves. I am perplex how this error can persist when the original script is now being used.
If there's is anyone out there who can help me resolve this I'd be most grateful. As I say I've tried to resolve this myself and am pretty computer savvy but this one has defeated me
Thanks in advanceThe problem seems to be already solved, but I'm commenting this for future reference.
This has happened to me too and I think I know what causes it.
It happens when you...
1) Do "Save for Web" with the "All User Slices" selected in the dropdown menu "Slices".
(This can only be done with a file that has a user slice)
2) Then try to use the "Layer Comp to Files" script to a file that doesn't have any slices.
To avoid this you need to once open a file that "has" a user slice and save with
the "All Slices" option in the "Slices" menu and then go back to the file you want
to run the script to.
When you run the script, the saved "Slices" option from the previous export seems to
be used and causes an error when there are no user slice.
I also found a fix to the script to avoid this error to come out.
This can be also applied to the fix to "remove the numbers" added to the head of the
exported file names.
The number removal script goes something like this...
var fileNameBody = exportInfo.fileNamePrefix;
if (fileNameBody != "") fileNameBody += "_";
fileNameBody += compRef.name;
this should replace the "Layer Comps to Files.jsx" lines 188-190.
In addition to that, the script below needs to be added below line 818 and line 863.
(This line numbers are those before any alterations to the "Layer Comps to Files.jsx" script)
var idSWsl = charIDToTypeID( "SWsl" );
var idSTsl = charIDToTypeID( "STsl" );
var idSLAl = charIDToTypeID( "SLAl" );
desc4.putEnumerated( idSWsl, idSTsl, idSLAl );
The line right above where the above script should be inserted should read as the following...
desc4.putPath( id44, new File( exportInfo.destination + "/" + fileNameBody + ".png") );
Actually it can be added any where after the "desc4" variable is declared but I specified just
to make it simple.
This sets the "Save for Web" "Slices" settings to "All User Slices". -
Hi.
I am having a strange problem with my SCCM 2012 R2 installation running on Windows Server 2008 R2.
I am not able to add any new roles to the server.
Event log reports: "Product: Application Web Service -- There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space."
awebsvcMSI.log reports: "Product: Application Web Service -- Configuration failed."
and
"Windows Installer reconfigured the product. Product Name: Application Web Service. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603."
I have three disks in the server.
C: (OS) ~8.7 GB free space
D: (SCCM) ~7.69 GB free space
E: (data) ~52.4 GB free space
I have NO_SMS_ON_DRIVE.SMS files on C: and D:. I tried removing it from D: and restarting the server without any effect.
Does anyone have a solution to this?
Thanks in advance!
/MichaelThat error says the same as the event log:
"Action start 11:49:28: CcmCheckFreeDiskSpace.
MSI (s) (38:F4) [11:49:28:274]: Product: Application Web Service -- There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
Action ended 11:49:28: CcmCheckFreeDiskSpace. Return value 3.
Action ended 11:49:28: INSTALL. Return value 3." -
In printer services error message says "unable to perform this operation"
when I try to check my ink levels in the printer services area, an error message comes up "unable to perform this operation"
I have deleted and reinstalled my printer. I have downloaded the lastest driver--all to no availPlease read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
PDF error - not enough memory to complete this operation.
A friend with I think LION has this error when they hit print and then save as PDF on a single 1 page doc.
PDF : SORRY - not enough memory to complete this operation....
Any ideas how to fix this?Hi,
not sure - this is the default funtion in osx - when you hit cmd print - then lower left "SAVE AS PDF"
hope that helps...
Q is there a way to reset the default app? -
We ar e working with a 3par san combined with a hyper-v cluster. I have some virtual machines with direct attached storage. when i issue the command optimize-volume -driveletter x -retrim I Always get an error Not enough storage is avalable to complet this
operation. The command defrag /L gives me an out of memory error. All volumes are over 2 TBHi,
Thanks for responding,
We are working with Windows 2012 R2. We are running the optimize-volume cmdlet on the guest system. The guest system is directly attached to the SAN through the virtual fibre channel adapter. Although we have some volumes with less ten 15 % space we
also have tested it with volumes which have more then 25% space. All gave the same error so I'm wondering if it is the amount of memory addressed to the virtual machines what give the problem
The HP 3Par San normaly will do it automaticly but on 1 volume it is not cleaning up after we deleted 2 TB on disk space. -
Error on running LV application-not enough memory to complete this operation
Hi,
Developed an application for multi plot graph.
The graph is having around 25 plots and and its fetching many records from the database for the pltting purpose.
This LV application is a module of a VB real time application which is running always on the PC.
Now when the user tries to plot the graph...some times he is getting an error message as the following
"not enough memory to complete this operation"
What are the reasons for such an error message and how do i eliminate this error?LabVIEW cannot allocate the memory needed to complete the task at hand.
Prevent data copies of large datasets.
Reduce the amount of data in your graphs. (Not all point can be seen as individual points, if the scale is from 0-1000 you can plot 1000 points, but with the scale 0-1000000 you can also have 1000 point instead of 1000000 and see almost no difference.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl) -
Error "not enough memory to complete this operation"
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
Attachments:
Project fo 2 PC.zip 108 KB
Project for crio.zip 114 KB
Error.JPG 14 KBHi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare) -
"Application unable to complete an operation" warning. Firefox(17.0.1) or Windows 7 problem?
On starting Firefox (17.0.1), I get the message "application was unable to complete an operation."
Is this a Firefox error or the OS (Windows 7, 64 bit)? After I close the warning, Firefox seems to operate normally.Try run the Firefox program once as Administrator (right-click: Run as Administrator).
Maybe you are looking for
-
Is there a way to delete some of the used versions of the project I've just completed?
How can I deleted unusable versions of the project I've just completed in PE 9?
-
Hi All! I am doing the following code: String indexPath = "Y:/var/session/ZGCoVyCCcooSl1uHRYCAWg.idx"; File idxFile = new File(indexPath); if(idxFile.exists()) System.out.println(indexPath + " exists."); else System.out.println(indexPath + " does not
-
Hi, Scenario : Slap and Ship Outbound scenario using SAP AII 5.1 Issue: Currently I am setting Up RFC Connections for the Auto-ID Test Tool. When I test the NOTIFY_TAGS_OUT RFC Destination, I am getting the below error HTTP/1.0 500 SRT: Unexpected fa
-
Restore new database form another database backup
It is possible to restore a new database on a new host from old database backup files (after old database failed from media failure)? I want to do it just for testing purpose. I appreciate your help. Thanks in advance!
-
I keep getting an err=-36 error on a few songs from an albumn I just peurchased on itunes. Any suggestions on how to finish getting the songs?