Unable to completely load some websites so I can navigate them. This began when I allowed Yahoo e-mail to use the "https" on all of the e-mail earlier today. The IE is still loading websites without a problem. FF is the my primary browser.

OS, XP SP3, AV ESET NOD 32, Version 5. Zone Alarm Extreme, hardwired firewall.
Some websites (1 especially) only a few options appear and when I click nothing happens. The site is like "dead". Using the IE, it opens and I can navigate it. I never had this problem before, however it has appeared with a few other sites as well, starting today. No matter which URL I select for this website, it comes up with the same appearance.

Hi,
According to your description, it seems like 3rd app process startup with Windows caused this problem.
In my opinion, it would be better to use Autoruns to check Window Startup items if there is any IE activX start with IE.
Download Autoruns:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Pleasse use Autoruns to check system startup items carefully, and try to remove 3rd items for test.
Roger Lu
TechNet Community Support

Similar Messages

FF6 wont connect to websites. Shows 'connecting...'or green circle going round. Loads some or none of page. remains like this indefinitely. Have removed & re-entered FF in Norton360 f/wall & uninstalled then downloaded FF6 again to no avail. IE/Chrome OK

FF6 wont connect to websites. Shows 'connecting...'or green circle going round. Loads some or none of page. remains like this indefinitely.
Have removed & re-entered FF in Norton360 f/wall & uninstalled then downloaded FF6 again to no avail. IE/Chrome OK

Just an update... A rep contacted me and we did a screen share. They were convinced that I wasn't full of <insert proper word here>. They promised to get back to me in a few days, and now? A few months later? Nothing.
Still no files. Still no correction... Still no nothing from Adobe.
The person I spoke to was kind, saying he'd make sure I got CC for free for a while...
Still though, no follow up.
Adobe, are you going to correct this or just let your customer suffer at your mistakes?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

Often when I do a search and then click on the link I am redirected to a fake or phishing website. How can I stop this? Thank you!

Often when I do a search and then click on the link I am redirected to a fake or phishing website. How can I stop this? Thank you!

Usually you would get to a phishing site directly by mistyping, or from the search itself.
You can avoid a lot of phishing sites with the following:
'''Tools > Options > Security''' 
''Known attack sites can be blocked here, uses information reported to Firefox and to Google.'' 
[x] Warn me when sites try to install add-ons 
[x] Block reported attack sites 
[x] Block reported web forgeries
Having a good '''hosts''' file on your system can protect your entire system cross-application and all browsers and all your Firefox profiles against a lot malware. The '''hosts''' file must coded for www.example.com, example.com, anything.example.com -- '''Adblock Plus''' is more generic and can do more with less coding. See links below.
'''More information:''' on extensions and keyword shortcuts
* [https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/ Adblock Plus :: Add-ons for Firefox]
* [http://adblockplus.org/en/filters#basic Writing Adblock Plus filters]
* [http://www.siteadvisor.com/ McAfee SiteAdvisor Software -- Website Safety Ratings and Secure Search]
* [https://addons.mozilla.org/en-US/firefox/addon/wot-safe-browsing-tool/ Web of Trust - Safe Browsing Tool :: Add-ons for Firefox]
* [http://winhelp2002.mvps.org/hosts.htm Blocking Unwanted Parasites with a Hosts File]
* [http://userstyles.org/styles/42848 Google - Highlight harmful site alert - Themes and Skins for www.google - userstyles.org]
* [http://kb.mozillazine.org/Problematic_extensions Problematic extensions - MozillaZine Knowledge Base] (McAfee Site Advisor is listed as problematic, read information)
* My notes on extensions -- http://dmcritchie.mvps.org/firefox/firefox.htm#ext_table
* [http://dmcritchie.mvps.org/firefox/kws.htm Firefox Keyword Shortcuts] (and bookmarklets)
Just so you don't miss important information about Adblock Plus, be aware that it does nothing by itself -- it needs filters. Be sure to install the "EasyList (US)" filter subscription.
In your google search settings (preferences), you can filter adult content, but that is not phishing
* http://www.google.com/preferences?complete=0&hl=en
Phishing protection comes from your browser using collected phishing data -- not from the Google search itself where you might see a warning.
* (Google Chrome) http://www.google.com/support/chrome/bin/answer.py?answer=99020
* (Firefox) already covered what you need to set in security options
more
http://googleblog.blogspot.com/2011/06/ensuring-your-information-is-safe.html
''corrected to read Tools > Options > Security''

Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? Thanks.

Can you take the SIM card from an IPad and transfer it to a NEW Ipad (not yet purchased) without any problems? Are there any complicated steps involved? This is for my boss.
Please let me know. Thanks in advance.

Simple answer is YES.
The only caviat is for instance in the UK some iPads are locked to a specific network provider and therefore if the new iPad is locked then it will only work on the specific network it is locked to.

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals.

On Excel 2013 (64 bit), I can't use the Analysis ToolPack add-ins without a problem and plot the residuals. It went crash.

Hi,
In regarding of the issue, please provide us more information to assist you better.
Do you mind telling us the Excel version number? Like 15.0.XXXX.1000
Would you like to collect the Event Log and App Crash dump file to do further troubleshooting?
As far as I know, if Excel crashes when using Analysis ToolPack add-ins, it usually causes by the >>Faulting module name: mso.dll<<, Please try the following method and check if it is helpful:
1.Copy/paste the Mso.dll from another PC.
2.Click "Start" and "Computer."
3.Double-click "C: Drive," "Windows" and "System32." The System32 folder opens.
4.Drag the Mso.dll file on your desktop into the System32 folder.
5.Click "Start," type "cmd" into the search field and press "Enter" to open the Command Prompt.
6.Type "regsvr32 mso.dll" (without the quotation marks) into the Command Prompt and press "Enter."
7.Close the Command Prompt and restart your computer.
Then, if the Faulting module name is not MSO.Dll, you also can upload(Or send to us via email
[email protected]) the Event Log/App Crash dump file. We'd like to do further troubleshooting.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT201263 None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

Read: iPad Troubleshooting Assistant
That procedure eventually leads you to the need to restore it.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
If you still can't get it to work, you have done all you can and only Apple will be able to help.

Just got iPhone 4S, people unable to hear me during calls but I can hear them? Is it repairable or do I need to take to apple store to get new one?

Just got iPhone 4S, people unable to hear me during calls but I can hear them? Is it repairable or do I need to take to apple store to get new one?

Hi, Laura.
There are some troubleshooting steps that we can process prior to opting for a repair. If you do have a protective film on your device make sure that is removed and test to see if the behavior persists. Below, I have attached an article that goes over some basic troubleshooting steps. After all steps are processed and the issue persists, we can service your unit at your local Apple Retail Store. You can schedule an appointment buy clicking this link http://www.apple.com/retail/.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Jason H.

I cannot play a song I purchased. The message says the computer is not authorized. I deauthorized and reauthorized it and it still will not work. Should i delete the song and download it again?

The message says the computer is not authorized. I deauthorized and reauthorized it and it still will not work. Should i delete the song and download it again?

Should i delete the song and download it again?
Yes ... if just one song on an album is doing that, it usually means you've got a damaged file on your hands.

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

I am trying to export my iPhotos to an external HDD. As soon as it gets to 200 photos, I get an error message that says unable to create volumes/freecom/my pictures. Can i remove this limit or increase it? I have nearly 17,000 pictures to export.

I am trying to export my iPhotos to an external HDD. As soon as it gets to 200 photos, I get an error message that says unable to create volumes/freecom/my pictures. Can i remove this limit or increase it? I have nearly 17,000 pictures to export.

1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

When I install any theme, the homepage (more specifically Black Google) will not load as hompage. How can I fix this?

When I install any theme, the homepage (more specifically Black Google) will not load as homepage. How can I fix this?

Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I am unable to track my security Q ?where can i retrive this info ?

I am unable to track my security Q ?where can i retrive this info ?

Go to 'manage your apple id'. Sign in. On left hand side you will see 'Edit your apple id'. Second option is 'password and security', Click that and you are at your destination.

When I start Firefox, I can not open a website. How can I correct this?

When I first start Firefox, the following happens:
The symbol to the left of the input box is faded out.
After typing a website to load, nothing happens.
I can load a website by using the Google Search. After doing this, Firefox seems to run ok.

If you start Firefox in [[Safe Mode]], does it work? there is perhaps an extension that is interfering with Firefox's normal operation. If it works in Safe Mode, you can try disabling your extensions one-by-one until you find the culprit. [[Uninstalling add-ons#w_how-to-disable-extensions0-personassf-and-plugins|How to disable extensions, Personas, and plugins]]

Hello. I have premiere elements 12, & tried to open new project, but nothing happened. All you see is a purple & black ribbon. I could open organizer without any problem! I've accepted all the windows 7 updated. I've even updated my graphics drivers.

Hello. I have premiere elements 12, and have tried to open a new project, but nothing happened. All you see is a purple and black ribbon, then nothing. I can open the organizer without any problem at all!
What I have done so far:
Accepted all windows 7 updates - essential and non esential
I've updated my graphics drivers
I've also deleted and reloaded Premiere Elements from the disc
I reloaded quick time and accepted the latest version
All have no affect.
My system is a windows 7 64 bit PC.
I also have plenty of hard drive space
Cyberlink PowerDirector 11 works fine.
PS - This seems a common complaint about Premiere Elements 12
Help!

David Scholes212
Premiere Elements 12 on Windows 7 64 bit
Look at the issue with and without the antivirus disabled. If that does not help....
There is a likelihood that the program may not be properly activated. Please review the following for possible solution
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
Other possibilities include
a. Deleting the Settings file named Adobe Premiere Elements Prefs file
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Options Show Hidden Files, Folders, and Drives active so that you can see the whole path cited.
b. Do the uninstall, reinstall with a ccleaner (regular cleaner and registry cleaner parts) in between the uninstall and reinstall with the antivirus and firewalls turned Off.
Please review and consider. We will be watching for your progress.
Thank you.
ATR

Unable to completely load some websites so I can navigate them. This began when I allowed Yahoo e-mail to use the "https" on all of the e-mail earlier today. The IE is still loading websites without a problem. FF is the my primary browser.

Similar Messages

Maybe you are looking for