Unable to compress a request.

Hi experts,
I am unable compress a request by manually and by scheduling in the process chain also it is not compressing.
when i open the collapse tab it saying No valid request exists for compressing
then i entered manually with request id. job finishing without compression and i found in the job log(SM37)
*No requests needing to be aggregated have been found in InfoCube
*Compression not necessary; no requests found for compressing
*Job finished
in 10 seconds.
Process chain is also completed successfully without compression.
i don't know y it is not compressing the requests ?
Thanks in advance.
Regards,
<BMP>

Hi,
Note: Is "Tick" mark there against your request in requests tab?
If you are able to see your request in requests tab as not compressed, then delete this request and reconstruct it back from the Reconstruction tab. But please check in reconstruction tab to make sure the same request is available.
After the above activity, you can try to compress this request.
Hope you understand.......
Regards,
Suman

Similar Messages

Unable to Compress the request of a Cube

Hi All,
I was trying to compress the cube data,At one request I got stuck. When ever I try to compress that request manually, but it is unable to compress the request and sends the following job logs
Job started
Step 001 started (program RSCOMP1, variant &0000000000190, user ID XXXXXX0006)
Performing check and potential update for status control table
No requests needing to be aggregated have been found in InfoCube 0XX_X01
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
After further analysis, I observed the request which I am compressing , has an selective deletion.Since its is 2year old data I would like to compress the data,please suggest is it possible to compress,If the request has selective deletion.
please suggest.
Thanks & Regards,
Abdul

Hi Abdul,
Check that, if the cube that is being compressed feeds the data to a different InfoProvider, if yes then complete that laod first and then do the compression. this might be the reason sometimes. if the cube is not feeding anything currently try compressing the request again.
In some cases ,when the compression is manually performed (in the tab collapse of the cube) no compression would be done. In those cases you can try creating a process chain with only the compression step. This often solves the problem.
If both the above process don't solve your problem,
Try the SAP note :407230 (such problems occure after installing SP15.)
Regards,
Sudheer.

Handling Compressed HTTP Requests on Tomcat 6.0.14

Hi All,
     I am sorry to post this problem here if it not relevant, but I have investigated so much but couldn't come up to a solution.
     I have developed a Web service using JAX-WS 2.1 and successfully deployed on Tomcat 6.0.14. My Web Service accepts and sends large data. So i have tried to use data compression on Tomcat.
     *I have successfully performed sending compressed HTTP Response from tomcat but not able to configure it for accepting compressed HTTP Requests.* If you need more details about my problem read further.
     I have successfully configured my tomcat server.xml like below:

<Connector
     port="8080"
     protocol="HTTP/1.1"
     connectionTimeout="20000"
     redirectPort="8443"
     compression="on"
     compressionMinSize="20"
     compressableMimeType="text/html,text/xml,text/plain,text/javascript,text/css"
/>     Tomcat will send compressed responses to clients when ever it is willing to accept compressed data otherwise server will send plain responses.
     Now on words when ever server will get HTTP Request with *"Accept-Encoding: gzip"* set it will send compressed response to that HTTP Request and plain response otherwise. All modern web browsers accepts compressed data.
     This is working great.
     *My Problem is I want tomcat to accept and understand compressed HTTP Requests also*, for that I have compressed my request with java.util.zip.GZIPOutputStream and set HTTP Request Property like below:
"Content-Encoding: gzip"
"Accept-Encoding: gzip"     But server returns error code 500( Internal Server Error). The server log shows error like:
com.sun.xml.ws.streaming.XMLReaderException: Unable to create StAX reader or writer
        at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$Zephyr.doCreate(XMLStreamReaderFactory.java:305)
        at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:143)
        at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:147)
        at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:133)
        at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:294)
Caused by: javax.xml.stream.XMLStreamException: java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.
        at com.sun.xml.stream.XMLReaderImpl.setInputSource(XMLReaderImpl.java:197)
        at com.sun.xml.stream.XMLReaderImpl.<init>(XMLReaderImpl.java:180)
Caused by: java.io.UTFDataFormatException: Invalid byte 1 of 1-byte UTF-8 sequence.
        at com.sun.xml.stream.xerces.impl.io.UTF8Reader.invalidByte(UTF8Reader.java:724)
        at com.sun.xml.stream.xerces.impl.io.UTF8Reader.read(UTF8Reader.java:593)     Please guide me through...
- Tejas Purohit

Solved it by going to the temporary folder for netbeans:
C:\Documents and Settings\creator\.netbeans\6.0\apache-tomcat-6.0.14_base\logs This is where it is placed on my install drive. This is where it deploys the builds , not in the C:\Program Files\Apache Software\Tomcat 6.0.14 as I would expected.
It seems that it is an IDE bug after all it is not cleaning the old logs. For today I found a 64 mb log (localhost.2008-01-02.log).
Thanks

Differences in compressing the requests.

Hi experts,
What is the difference between compressing the request with:
No marker update ( Checked ).
No marker update ( Not checked )
Zero elimination.
And also if we fill the setup tables through mcnb ( Initialization of stock ). What exactly it mean ? ( Is it the stock which is there at the time we fill the setup tables ? ).
And also suppose if we filled the setup tables of 2lis_03_bx through mcnb today and through oli1bw we need to the fill the historical data of 2lis_03_bf .
Here what should be the date range.Is it upto yesterday? ( Bcz we have filled setup tables of bx though mcnb today ).
Please explain me in simple words.Full points will be assigned.
Regards,
Bhadri M.

Hi
Stocks are calculated using the stock marker and appliying the movements types and quantities to that marker.
If you compress cube with no marker update checked, movements compressed doesn't update the stock marker and are viewed as historic data, then after initialization the mark must be uncheckd in order to update the stock marker.
To be more precise and simple marker update Updates the stock values and NO Marker does not.
Generally BX upload has to be compressed with marker update and BF(and UM) delta init has to be compressed with NO Marker because Stock was updated with BX. And delta loads of BF and UM has to be compressed with marker update because these brings new Material movements which will has to give effect to stock.
Sorry for edition but was unable to post
Zero Elimination Explaination
Compression is nothing but moving the data from F fact table to E fact table by losing its request numbers.
For cumulative key figures(compression)
Here we have a option called zero elimination (it is applicable only for cumulative key figures). If you want to avoid the Info Cube containing entries whose key figures are zero values (in reverse posting for example) you can run a zero-elimination at the same time as the compression. In this case, the entries where all key figures are equal to 0 are deleted from the fact table.
This is permitted only for Info Cubes , where key figures with the aggregation behavior SUM appear exclusively. In particular, you are not permitted to run zero-elimination with non-cumulative values.
Thanks
Edited by: Noor Ahmed khan on Jul 30, 2008 6:55 PM
Edited by: Noor Ahmed khan on Jul 30, 2008 6:59 PM

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Not able to log out of application:JspServlet:unable to dispatch to request

We are developing our application on oracle ADF (jdev verison:10.1.3.2). and deploying it in the SOA server(version 10.1.3.1).
The problem with our application is that when the logout button is clicked the application gives the following error:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
When the application log is consulted it reads:
08/07/02 07:20:45.209 Buddy: JspServlet: unable to dispatch to requested page: Exception:java.io.FileNotFoundException: C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\skins\common\Login.jspx (The system cannot find the path specified)
We have an application wherein a global navigation rule in faces-config is defined as
<navigation-rule>
<navigation-case>
<from-outcome>login</from-outcome>
<to-view-id>/common/Login.jspx</to-view-id>
<redirect/>
</navigation-case>
The file Login.jspx is present at
C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\common\Login.jspx
But somehow the deployed version tries to find it at
C:\product \10.1.3.1\OracleAS_2\j2ee\home\applications\Buddy\ Buddy\common\skins\common\Login.jspx
I am not able to understand why the page is being searched in
~\skins\common\Login.jspx and not in ~\common\Login.jspx
Please help me out of this situation.
Buddhadev

Please post ADF questions to the JDeveloper forum. ADF is a component of JDeveloper and all the experts in ADF are in the JDeveloper forum.
-steve-

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

We're sorry, but we are unable to complete your request at this time. Please try again in a few minutes or start over now.

Trying to send my iPhone 5 in for repair, keep getting this error:
"We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
(system.99)"
Tried using different browsers, and waiting few minutes, no joy : (
Any Ideas?

Yeah, it kept doing it when I was trying to change the delivery address, changed it on my apple main apple profile adress and then it worked on the repair page.

Unable to create a request in CUP

Hi All,
We are unable to create a request in CUP 5.3.We have created the "Number Range" and it is activated. Workflow path is looking fine.
The strange thing is I am not getting any error message after submitting the request.
Please let me know the possible causes of this.
Regards,
Rakesh Narne

Rakesh,
What message do you get? There has to be some message. If you are not receiving any message then you might not have uploaded the .xml files into CUP. CUP comes with some initial data in the form of xml files and you need to import these files into CUP before using the tool.
Without error message or some kind of long information, we won't be able to help you.
Regards,
Alpesh

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. Event 1121

Hello all,
We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40'
Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
I also ran these commands in shell to attempt to cancel the stuck request.
Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.

Hello,
Please try to restart iis services to check the result.
If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
Set-AdServerSettings
http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
Besides, please install the lasted rollup to check the result.
Cara Chen
TechNet Community Support

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. : Error: An Active Directory Constraint Violation error occurred

Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R Dash

Hi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error

Since demoting a child domain a few days ago, Exchange 2013 is still trying to contact it and as a result generating errors in the application event logs. I had a similar problem which I solved by removing some old migration batches, now I have a problem
with the Microsoft Exchange Mailbox Replication service.
The event logged is:
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '0b6c0f5a-0563-48e2-8b97-e0781c6cc69a'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for
domain 'admin.riddlesdown.local'.. --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or
configured incorrectly DNS server.
The domain doesn't exist in AD Sites and Services, I have removed all traces from DNS but this is still occurring. When I run Get-ADServerSettings | fl it reports no trace of the domain or a DC that was previously in it.
How can I stop these events occurring and is it likely to be causing something else not to work correctly.
We are running Exchange 2013 CU1

No, that didn't work. Here are more details:
Source: MSExchange ADAccess (EventID: 2130)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or configured
incorrectly DNS server.
Source: MSExchange ADAccess (EventID: 2119)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Error DNS_ERROR_RCODE_NAME_ERROR (0x8007232B) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain admin.riddlesdown.local
The query was for the SRV record for _ldap._tcp.dc._msdcs.admin.riddlesdown.local
Common causes of this error include the following:
- The DNS SRV records required to locate a domain controller for the domain are not registered in DNS. These records are registered with a DNS server automatically when a domain controller is added to a domain. They are updated by the domain controller
at set intervals. This computer is configured to use DNS servers with following IP addresses:
10.59.100.7
10.59.100.8
fec0:0:0:ffff::1Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::2Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::3Microsoft.Exchange.Directory.TopologyService.exe
- One or more of the following zones do not include delegation to its child zone:
admin.riddlesdown.local
riddlesdown.local
local
. (the root zone)
Source: MSExchange Mailbox Replication Service (EventID: 1121)
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '87f4b926-0621-43d3-afeb-fe475ee6d850'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
--> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Something is cause the Exchange server to go looking for our old domain, but what and why?

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Unable to Delete the request in ODS

HI Friends,
      I am facing the problem with deleting request in ODS.
          I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
    it is showing the message request is already activated;no further QM action possible.
       My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.

Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Unable to Rollup a request in InfoCube

I am unable to rollup one request in Infocube. I am getting the following error messages in Detail Tab.
InfoCube XXX is locked by a terminated change run
Lock NOT set for :Roll up aggregates
Rollup terminated : Data target XXX from X to Y.
In SM12 I havent found any lock on the Infocube XXX.
Please let me know how can I solve this issue.

hi,
please check my replies in your previous postings
UInfoCube XXX is locked by a terminated change run
Rlgmnt Run (Attribute change run)

Unable to compress a request.

Similar Messages

Maybe you are looking for