Unable to Configure Forums iView

Hi All,
We are using SAP EP 7.0 SP13 and planning to implement Forums. We have downloaded following SCA files from market place
FORUMS13_0-20002293.SCA
KMCUI13_0-20002292.SCA
These files were successfully deployed using SDM tool on portal server. Now I am following the pdf file attached with SAP note 1049553 to configure iViews.
After following the steps mentioned in pdf file as I am trying to prview the iView, we are getting the following
"The system is currently being updated. Please be patient".
Any ideas?
Any pointers would be of great help.
~Cheers,
Vivek

Hi Vivek,
Did u add the administrator in Add Administrator IView first. ?
Thanks
Suresh

Similar Messages

Forums iview problem

I had configured forums and it worked fine.
Buy now i am unable to see the end user forum iview .
When i click on the link nothing is displayed.
Suggest solution for this.
Mr.Chowdary

Just a simple rastart has solved my problem.
Any way thanks raj.
Mr.Chowdary

Collaboration forum iview error

Hello,
I want to work with Collaboration forum iview in EP7.0 SP13. So, I have installed the following software components (visible from EP System information):
sap.com KMC-UI 7.00 SP13 (1000.7.00.13.0.20070827114000) SAP AG SAP AG 20071121151957
sap.com FORUMS 7.00 SP13 (1000.7.00.13.0.20070827114000) SAP AG SAP AG 20071121152111 
Unfortunately, when I preview the Collaboration forum iview the following error appears:
wrong iView configuration. further information can be found in the log file of your engine.
And finally the log file shows the next error message:
wrong iView Configuration: the iView property 'com.sap.nw.coll.forums.portal.ForumsView is not correctly set up. '' is an invalid value.
Is another post-installation step necessary?
Could it be a permission problem?
Any idea?
Thanks in advance,
Marta.

Check below may be use ful for you
Steps by step configuration:
1. Download Forums 7.0 Application from Marketplace.
In the SAP Service Marketplace access the download area using URL http://service.sap.com/swdc
In SAP Software Distribution Center choose Download->Support Packages and Patches-> Entry by Application group -> SAP Netweaver -> SAP NETWEAVER -> SAP NETWEAVER 2004s -> Entry by Component -> Enterprise Portal.
You need 2 SCA files from here. Forums7.00 and KMC UI Layer 7.00
Download SCA files necessary to install Forum Application.
->Choose Forums 7.00 and choose #OS independent
Download Forums 7.00 SCA file.
-> Choose KMC UI Layer 7.00 and choose #OS independant
Download KMCUI SCA file. What does these files contain?
A forum 7.00 SCA file contains the actual Forums Application whereas KMCUI contains Forums Iview template.
2. Deploying files using SDM
Start RemoteGUI.bat from \usr\sap\EBD\DVEBMGS00\SDM\program
Choose Deployment. Add Forums SCA file and KMCUI SCA file for deployment. Follow the 4 steps to complete the installation.
You need to restart the server for changes to take effect.
 You can see the Collaboration Forums iView Template in PCD.
Goto Content Administration -> Portal Content -> Content Provided by SAP -> Templates -> iView Templates
1. Providing basic set of Forums Iviews.
After deploying forum application to your portal, you need to make the Forums Homepage and Forums Administrative functions accessible via Portal iViews.
Procedure: Create custom iView Template
SAP recommends to create a custom iView template as a delta link copy of the standard iView template delivered by SAP. The specific configuration of your custom iView template is not affected by new deployments.
1. In the portal, choose Content Administration -> Portal Content.
2. In the Portal Content Studio, open the folder Portal Content -> Content Provided by SAP -> Templates -> iView Templates.
3. In the context menu of the Collaboration Forums iView choose Copy.
4. Locate the target folder (a folder of your choice) and in its context menu choose Paste as Delta Link.
5. Rename the custom iView template so that in the iView creation wizard you can distinguish the specific iView template from the default one.
You may need to restart the cluster in order to see your custom iView template in the list of iView templates when you create a new iView.
2. Create End User and Administrator iViews
Based on custom iView template for forums, you can create the required forum iViews. To work with forums you need following 3 Forums iViews:
 User view (Forums Home page)
 Administrator View (Admin Console)
 Initial Administration View
Procedure to create all these views is same only the iView configuration differs.
Procedure to create these iViews1. In the portal, choose Content Administration -> Portal Content.
2. In the Portal Content Studio locate the target folder for your new iView.
3. In the target folder's context menu, choose New -> iView.
4. Select the custom iView template for forums.
5. Enter the required values and in the last step choose Finish.
6. Select the option Open the object for editing.
To configure each iView, open property editor of the iView.
a. User View
1. Select the property category Forums Configuration.
2. For the property View on Forums select Forums.
3. Select the property category Navigation.
4. For the property Quick link enter forums.
b. Administrator iView
1. Select the property category Forums Configuration.
2. For the property View on Forums select Forums Administration.
3. Select the property category Navigation.
4. For the property Quick link enter forumsadmin.
c. Forums iView for initial Administration
1. Select the property category Forums Configuration.
2. For the property View on the forums select Add Forums Administrator User.
This iView is used to set Forums Administrator User. Whenever you want to set a new administrator for forum, use this iView to set it.
3. Create roles and set Administrator for Forums
Now you have all the iView required to work with Forums application. Please create a simple role, name it as Forums Admin and assign all the 3 iViews you have created to the role.
Create a End User role and include only User View (Forums Homepage iView) in the role.
Assign this new role to a portal user. Login to portal using this portal user.
Setting Administrator for forum Application.
 Navigate to Forums role -> Initial Administration iView.Note: To Access this Initial Admin iView, Portal user should be in Administrators Group. Alternatively, the portal user should be member of the application-specific J2EE security role named JiveAdminDefinitionRole. (cf. Security Provider for the sap.com/com.sap.netweaver.coll.forums)
In this iView, enter a portal user and choose Set User. This user will be New Forums Administrator.
Now you have set a Forums Administrator. Login using this portal user, don't forget to attach Forums Administrator role to this user.
4. Creating Categories and Forums
Please login to portal using forum administrator ID. Choose your forum role from TLN and choose Administrator iView.
To create a category, choose Categories summary. You need to create a new category in Root Category. Choose New Sub Category.
In Create Category, give a appropriate name for your category and choose create.
You have created a new category. You have to create forums in this category now.
Choose you newly created Category, and click on "Create New forum"
Give appropriate name and description to your forum.
You can decide what permissions you want to assign to the forum. You can change the permissions later as well.Choose Create Forum and you are all done with your basic configuration. All you have to do is, access User View (Forums Home Page view), and start posting.
Regards
Krishna.

Unable to configure Outlook with ASA firewall and IWSVA

Dear Sir,
We are unable to configure MS outlook in our network which is having IWSVA proxy and cisco ASA 5510 firewall.
snapshot of outlook error details are attached for your reference.
In our network L3 is behind IWSVA which is behind cisco ASA 5510.
when we change following NAt rule and ACL incoming rule it works fine
nat (inside,outside) source static any interface unidirectional
nat (inside,outside) source static obj_Proxy interface unidirectional
access-list 100 extended permit ip any any
access-list inside_access_in extended permit ip object-group Proxy_Server any
all required ports are allowed in IWSVA also please tell me if we have to make any changes in IWSVA like mapping ports etc.
Thanks in advance
Regards:
Anand Singh Dhouni

Hello Anand,
I already replied to you on the other post, Please mark this as answered so we can focus on one ticket and avoid duplicates.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha Muyida

Hi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha

Adobe plugin for Outlook in 2013 unable to configure to load at startup

Windows 7 Pro, Office 2013 Home and Business
I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
Any ideas?

Hi jeremyh77032804,
Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
Do you have the administrative privileges to this location specified above?
Please let me know.
Regards,
Anubha

UNABLE TO CONFIGURE ODSM(oracle directorey service manager_

Hi ,
I am unable to configure ODSM with weblogic and getting the following error
"ERROR while deploying the application ODSM
cause:
An internal operation has failed :weblogic.management.DeploymentException:[J2EE:160149]Error while processing library refrences ,unresolved application library refrences defined in weblogic-application.xml:[Extension adf.oracledomain.com)
Thanks
Giridhar

Hi Giri,
Install the Java Required Files (JRF) in the Managed Server where you want to deploy your
application to.
NB: Java Required Files (JRF) consists of those components not included in the Oracle WebLogic
Server installation and that provide common functionality for Oracle business applications and
application frameworks. They include the ADF Runtime Libraries.
Regards,
Kal

Unable to see an iView in the Portal

Hi All,
I have a scenario, where in I have an iview in a page, the page can be in the workset,this workset has assigned to a role, and this role has been give to a user,now I have a user login to the portal , i am unable to see the iview in the portal, what could be the possible reason?
Regards
Chandra

If U r not getting the Role navigation structure in the portal then make sure that the "Entry point" for the role has been set to True.
If you are getting the Role structure in the portal but not getting the iView then check the iView Property "Invisible in Navigation Area" property set to false.
Next you can check for the iView Permission , if the User has permission for te iView or not.
Hope now u can get the iView in the portal
Cheers
Chinmaya
Reward for helpful answers

Am getting this message when i try to play music " unable to configure network stream"

am getting this message when i try to play music " unable to configure network stream"

Hold on... advice to someone downloading from 1337x !!!
Until I saw your comment and googled the term, I had no idea that this was a "downloaded" file. I assumed the "1337x" reference was to dimensions/resolution and Noir referred to genre. (I.e., I use similar notations the differentiate files compressed for TV playback comparisons.) In any case, the advice is the same irrespective of the source.
er, isn't it illegal to download movies ?
Not necessarily. Thousands of movies are probably downloaded daily as legal purchases from such vendors as iTunes. Thousands more are available for free in the public domain, open source/community videos listings, and under Creative Commons Licensing. In short, there are many legal sources of downloadable content and you should not automatically jump to the conclusion that everyone is a crook.

Forum iview error

Hi experts,
i am facing the following error while running forum iview (EP7.0 SP16)
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
Please suggest any cause/solution for the above behaviours.
Thanks,
Nanie Arianie

hi,
please try out this.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/kmc/forums7.00Configuration
regards,
kris
Edited by: gopi krishna on Apr 20, 2009 12:38 PM

Unable to configure the router.

I bought a router today and I'm having some trouble getting it working. Iinserted the CD and followed the on-screen installation settings including unplugging the modem/router, then plugging it back in, etc. I got to step 11 "Set the Router's Administrative Password" before I had problems. I went to set the password, but I got the message "Unable to configure router. Reset thr router to factory default settings by pressing the reset botton for 5 seconds." I reset the router, but still got the error. Using a quick search I found a similar problem and following the steps on there, pinged 192.168.1.1 with 4 replies. I connected to192.168.1.1 through my browser just fine as well, but I still can't get past step 11.

Have you configured hyour wireless settings on the router and your computer? This has to be done.
For cable go here
Wireless go here.

I am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.

HT201320 I AM UNABLE TO CONFIGURE MY MAIL ACCOUNT IN THE SETUP

I AM UNABLE TO CONFIGURE MY MAIL ACCOUNT IN THE SETUP

This may help you
http://support.apple.com/kb/HT4810

JET install: ERROR: Unable to configure network interface Exiting to shell

Using SUNWjet v4.4.4 I'm trying to build a server using update 5 x86 which seems
to work with one notable exception. The JET server and the build server do not
reside on the same subnet. In order to get around not being able use PXE boot
to boot the build server I'm booting from DVD after making the following modifications
to the grub menu entry:
kernel /I86PC.Solaris_10-1/multiboot kernel/unix - install nowin -B
install_config=x.x.x.x:/opt/SUNWjet,
sysid_config=x.x.x.x:/opt/SUNWjet/Clients/testclient,
install_media=x.x.x.x:/export/install/media/s10u5-x86,
install_boot=x.x.x.x:/export/install/media/s10u5-x86/boot
This seems to kick off the installer however it fails to bring up the network interface:
SunOS release
Configuring devices
Solaris Interactive Text ( Console Session )
ERROR: Unable to configure network interface Exiting to shell
# ifconfig bge0 x.x.x.x up netmask 255.255.255.0
# route add default x.x.x.1
# exit
Using RPC
Installation continues without any errors
It seems that I'm forced to bring up the interface manually each time.
This is what the template looks like:
base_config_ClientArch=i86pc
base_config_ClientEther=XX:XX:XX:XX:XX:XX
base_config_ClientOS=s10u5-x86
base_config_client_allocation="grub"
base_config_products="custom eiscd sds"
base_config_sysidcfg_nameservice=NONE
base_config_sysidcfg_network_interface=PRIMARY
base_config_sysidcfg_ip_address=x.x.x.x
base_config_sysidcfg_netmask=255.255.255.0
base_config_sysidcfg_root_password="XXXXXXXXXXXX"
base_config_sysidcfg_system_locale="en_CA.UTF-8"
base_config_sysidcfg_timeserver=
base_config_sysidcfg_timezone="Canada/Eastern"
base_config_sysidcfg_terminal=vt100
base_config_sysidcfg_security_policy=NONE
base_config_sysidcfg_protocol_ipv6=no
base_config_sysidcfg_default_route=x.x.x.1
I've also tried setting the following:
base_config_sysidcfg_network_interface=PRIMARY
vs
base_config_sysidcfg_network_interface=bge0
I don't mind doing this manually but of course I would much rather have it work automatically.

Try giving more network interface settings in the sysidcfg settings:
network_interface=value {primary hostname=host_name
                          default_route=ip_address or NONE
                          ip_address=ip_address
                          netmask=netmask
                          protocol_ipv6=yes_or_no}
See http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh2r?a=view

Welcome to the Configurator Forum

Welcome to the Configurator forum! Please use this forum to
ask questions, discuss, and share feedback with other Configurator
users.

I'm not a big fan of "me too" threads, but this piece of
voodoo does call for it.
I've spent the last year praying that us mere mortals would
get a chance to play with this forbidden technology, and I am quite
happy to see this come out.
From my first and quick look at it, one little request:
Please tell me the runtime and libc are going to be available in
one RSL. Static linking probably shouldn't stay as the default, as
it turns the tiniest C program into a 140KB compressed SWF.

Unable to Configure Forums iView

Similar Messages

Maybe you are looking for