Unable to configure in walton mobile phone

Walton Mobile

need more info... what OS.. supported protocols.
Active/Sync Etc.
is service working on another mobiles..?? what error ..??? try one more thing.. going onto 3G instead of wireless/LAN internet
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin

Similar Messages

  • Unable to connect skype to mobile phone while I ha...

    Dear Sir/Madam,
    I have a skype premium account of order number [removed for privacy], However I am unable to success to connect skype to Mobile call.
    Pls guide.
    Best Regards ,
    Saleem Saeed.
    skype ID saleem.saeed42

    Thank you for coming back to me re-camera problem.I found out that the problem was  my internet,you have to upgrade the software on the tv,I could not download it from home so I took it to the shop,they had a better internet reception.When I got home I had perfect reception.The camera is perfect,the problem I find now is the incoming picture is not as good as mine because they not are not using the same equipment.
                                                                      Steve 

  • .swf can't open in mobile phone

    I have created an interactive training material slides using Adobe Flash Pro CS6 for my company. It can work very well in my pc, but unable to open in my mobile phone. What should i do?
    ?

    Flash doesn't play on most cell phone and tablet operating systems. You may be able to use the createJS toolkit to translate your flash movie to html5. Here is more information on createJS toolkit: http://www.adobe.com/products/flash/flash-to-html5.html

  • Unable to change my mobile phone# displayed on out...

    Hi folks,
    Having moved to Japan from Australia, I've tried a few times to (verify and) change my mobile# displayed as the sender on SMSs I send.  Verification DOES take place successfully (ie "Options -> IM & SMS -> SMS Settings -> Verify a different mobile phone number") but I'm unable to actually make this new number replace my old number in "My mobile phone number."  In fact, I've just now sent a test SMS to my mobile and the sending mobile phone number displayed on the SMS is neither my old number nor my new number... it's some altogether different number!  Any ideas?  Thanks!

    I confirm that I can replicate this issue. Namely:
    In the Skype Application:
    'SMS Settings -> verify your mobile phone number' will send a verification code which will be received by the phone (Carrier: NTT Docomo).
    The received code will work in Skype. Confirmation message: "The code worked, your mobile number has been verified. However, the phone number will not appear in the drop down list.
    On the Skype Profile page:
    Clicking 'Verify my number' raises error: an internal error occurred.
    When selecting 'Caller ID', Japan (and Mexico) are not displayed in the drop down list.
    Skype Technical support and I troubleshot (troubleshooted?) including deleting the shared.xml file. However, this did not fix. We concluded that this is a problem with specific carriers. No ETA on fix.
    Hopefully this helps you not waste your time and, if you plan on coming to Japan, arrange alternatives.

  • Unable to call mobile phone numbers - Play mobile network - Poland

    Hi, I'm trying to call some mobile phone numbers in Poland and still got answer: "sorry you can not call this number". 2 or 3 months before it wasn't a problem but now seems that it's related only to one mobile network in Poland - Play. Do you have any idea whether they've changed their policy recently? Thank you in advance.

    I just contacted Skype support. The issue has been rosolved!!! The CALLER ID must be set up, otherwise PLAY will not accept the calls! I set up my Caller Id and suddenly was able to call all PLAY numbers! Thank you Skype for your efficient technical support!!! SKYPE RULES!!!!!

  • Unable to change my mobile phone from contacts to ...

    Hi
    I have tried on many occasions to save my mobile phone number from contacts to public..It will not change to public and wondering why.

    I confirm that I can replicate this issue. Namely:
    In the Skype Application:
    'SMS Settings -> verify your mobile phone number' will send a verification code which will be received by the phone (Carrier: NTT Docomo).
    The received code will work in Skype. Confirmation message: "The code worked, your mobile number has been verified. However, the phone number will not appear in the drop down list.
    On the Skype Profile page:
    Clicking 'Verify my number' raises error: an internal error occurred.
    When selecting 'Caller ID', Japan (and Mexico) are not displayed in the drop down list.
    Skype Technical support and I troubleshot (troubleshooted?) including deleting the shared.xml file. However, this did not fix. We concluded that this is a problem with specific carriers. No ETA on fix.
    Hopefully this helps you not waste your time and, if you plan on coming to Japan, arrange alternatives.

  • Unable to iMessage from iPad Wifi to mobile phone?

    The problem is one single mobile phone number. I already iMessage to three other non-iPhone mobiles, but when I enter this specific one, the "send" is greyed out, and I get the message "this number is not registered with iMessage ".
    Any tricks or help, please?. Thanks in advance.

    BobGuthrie wrote:
    The problem is one single mobile phone number. I already iMessage to three other non-iPhone mobiles, but when I enter this specific one, the "send" is greyed out, and I get the message "this number is not registered with iMessage ".
    By "to three other non-iPhone mobiles" I assume you mean three other iOS devices which means they are set up correctly as is your iPad.  So the question is "Has iMessage been properly set up on the iPhone that fails to work?".  For example, can you send a text message to your iPad from the iPhone? How about from the iPhone to the "other non-iPhone mobiles"?

  • Unable to call on landline and mobile phones

    I am facing problem to use my calling service through skype. (to landline and mobile phones). a massage showed on my home page that is as follows....  you are currently restricted from purchasing services or reedimming vouchers. please cantact costomer support to review your account status.  sir please help me out for this problems...

    Please its urgent

  • Can't get Exchange to work on mobile phones

    Hello everyone,
    We have a self-signed certificate deployed via group policy from our domain controller to domain users. We are using Exchange 2013. Via the way I just stated, users can access email in Outlook 2010 on the domain. However, we run into problems when trying
    to add the accounts on mobile phones. On an Android-based phone which is the Samsung Galaxy S4, we try to enter the settings manually via Exchange ActiveSync but it doesn't work. 
    I looked at this and followed the directions: https://support.office.com/en-ie/article/Set-up-email-on-an-Android-phone-or-tablet-886db551-8dfa-4fd5-b835-f8e532091872#__find_your_exchange
    I logged into the Outlook Web App and looked at the POP settings and tried that server with SSL and it doesn't work. I tried that with the full email address as the username and just the username. Our domain is the prefix for both. The POP server and the
    SMTP server are the same but POP has SSL and SMTP has TLS. I'm not sure if that makes a difference or not.
    I looked at the Exchange server settings and it looks like mobile access is enabled for all. I didn't create any policies though.
    What do you guys think?

    Hi CharGP02A,
    how does the error exactly look like? Any messages?
    As a first step to check your configuration I suggest you con go to https://testconnectivity.microsoft.com/ and run the test for ActiveSync. Please provide the result/error message.
    If you had a certificate issue your Galaxy S4 usually comes up with a message that it cannot verify the certificate. If you did not get the message I think that is not your cause.
    Also if you installed the cert paths certificates on your webserver, there is no need to install the certificate on the device. The webserver will deliver the certiuficates from the path. The only thing left on Android is that it may ask you because there
    is a root cert that is not trusted (yes, I suggest to use some 3rd party CA). 
    A good point to start would be
    --> check your ActiveSync externalURL using get-activesyncvirtualdirectory, https://technet.microsoft.com/de-de/library/hh529912%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
    --> check your CAS mailbox status for the mailbox
    --> run the test using testconnectivity.microsoft.com , so you will receive a clear description of errors.
    Regards,
    Martin
    I just tried connecting my email account via POP3 and got "unable to connect to email server to verify your account information. No response from the server." However, it pushed me to the next screen to put in more settings. I did that, got the
    same error, and then it let me finish adding the account with no issues. My email inbox doesn't have any email in it only because we haven't converted the MX records from our hosting service to Exchange yet. So unfortunately I won't know if email truly works
    on the phone that way.
    Regarding the ActiveSync part, I looked at our virtual directory for ActiveSync on Exchange 2013 EAC and the URL for that externally is https://web.domainname.net/Microsoft-Server-ActiveSync. The tried the Exchange verifier site that you guys linked
    and it won't let me run it with that URL due to characters. Web is a CNAME record on our DNS server and not a host record. Does that matter in this case? I tried it with just the web.domainname.net and it gave me 
    Host web.domainname.net couldn't be resolved in DNS InfoDomainNonexistent.
    Elapsed Time: 1040 ms. 

  • How Android v4.0 mobile phone connect to i-mac 10.7 ?

    Hi,
    I am using android v4.0 mobile phone.  when I connect my phone to i-mac 10.7, my i-mac can't dectect
    my phone? Actually, I need to transfer my photos from my i-mac to phone , How can I do that ?
    Thanks.

    Hi ,
    The solution that get me going is  as below:
    The steps to add printer is via http://localhost:631
    1.    From Safari, go to localhost:631 to enter cups (note proxy settings may need to be changed to allow this)
    2.    choose Administration tab
    3.    Add printer
    4.    System asks for password ---- this is the username & pwd for MAC Account (Checkbox not to be ticked for remember option)
    5. Choose smb option - Windows printer via spools
    6.    Printer address : queue name as  smb://servername.domain/queuename
    7.    Printer name –Not to have any space between words (HPCP5225dn—all one word)
         8. Choose the driver on next screen and  on the one after set printing defaults.
    When set up this way, the test page for the printer may NOT work first time. Open Word or another application and print a document, you will then be asked to authenticate. Enter userid and password only (ie not domain\) and printing will work.
    If you save the username and password it is saved in the User keychain - as it is per user it is OK to save and it won’t ask for authentication again.
    Thanks for your help and support.
    As of now I am facing another trouble while configuring the printer via server on 10.6.8.
    1.If I use the same method as used for 10.7 , the job goes to Hold and asks for authentication  and in this case the username is domain\username but problem is that I am unable to save it in the keychain.
    So everytime a job is sent ,it goes into hold and resuming the job asks for authentication.
    2. If I go via system preferences to add printer --it comes up with some NT_Status_Log-on Failure message or NT_Status_Bad_Network name.
    Please suggest any inputs to work on.

  • Purchase Order Approval through Mobile Phone

    Hi,
    Our EBS environment is with version 11.5.10.2 and database 11gR2.
    We got a requirement of configuring Purchase Order Approval through Mobile Phone / BlackBerry
    Could anyone send few docs related to this.
    Regards,
    Mahesh

    Please see these docs/links.
    Is It Possible To Approve Purchase Orders , Requisitions Via Blackberry, Smart Phone, or PDA? [ID 338874.1]
    Unable to Approve Purchase Orders via Blackberry [ID 444122.1]
    Blackberry Displays the Emails with HTML Tags in the Email Body [ID 802225.1]
    Troubleshooting Inbound Email Notifications [ID 1184846.1]
    Email Notification Approvals Are Discarded [ID 471423.1]
    Missing Html Buttons To Approve, Foward, Reject In Email Notification [ID 395986.1]
    Using Mobile Devices with Oracle E-Business Suite
    http://blogs.oracle.com/stevenChan/entry/mobile_devices_ebs
    Hands-On with Oracle's iPhone Apps
    http://blogs.oracle.com/stevenChan/entry/handson_with_oracles_iphone_apps
    Thanks,
    Hussein

  • Unable to configure Smarttalk in My BT

    How do I configure the settings for a SmartTalk phone account when MY BT won't let me because it is still "processing a previous request" and won't show the mobile phone?
    It has been like this for a week now .....
    I need to check the settings because my daughter is going to Paris in two weeks ....
    Is this just a variation of BT not getting MyBT to work properly?????

    Hi PBD,
    Welcome to the forum.  If you send me your details I will try and sort this out.
    Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Enterprise solution for Mobile phones using Wi-Fi

    Hi All,
    Not sure if this is the right forum.
    We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
    We recently bought a lot of APs ie AIR-CAP3502I-N-K9 + WLC and start deploys wireless around our building for data.
    Just wondering what alternative solutions or software we can use so we can somehow get our users' mobile to work.
    Thanks
    QL

    We are working in a building where we do not get mobile phone coverage ie cannot get signals at all from our telcos
    The Future of Hotspots: Making Wi-Fi as Secure and Easy to Use as Cellular
    Configuring Mobile Concierge
    If I read correctly, Cisco has started implementing 802.11u with the soon-to-be-release WLC firmware code 7.3.X called Mobile Concierge. 
    I am not sure about how to get this running but I hope this two links I've posted will get you to work. 
    Unfortunately, I am also not sure how mobile phone carriers will like this if mobile phones will go to an Enterprise wifi instead of their own network. 

  • Sending Email From Mobile Phone

    So I have Postfix working great and I've always used webmail if I needed to send email from PC's outside of $mynetworks. So fast forward to today where I got my 1st Android powered mobile phone and I can configure the Android mail client to send/receive IMAP email but my question is do I need to become an open relay to allow my random wireless providers dynamic range of IP's to send mail via Postfix? Seems extremely vulnerable and scary to think I would have to allow my providers IP range to relay mail via my MTA. I started reading a bit and I think I need SASL authentication (correct me please if I'm wrong) and since both Postfix 2.8.1 & Dovecot 2.0.11 are configured / using TLS, is there anything else I would need beyond SASL or that you recommend for sending email from my Android powered mobile?

    I'm in the same boat, except that I don't have a smartphone yet - but I'm already outlining the changes to my soho-network.
    I guess you have to secure the mailserver (using SSL + TLS looks ok to me) and also secure the server as a whole: configure iptables to lock it down completely, except for as little ports as necessary: IMAPS and SMTPS, maybe even on an other-than-default port...
    Maybe you are also interested in syncing your calendar: I will be doing that with davical on my server (running for 2 years now) and acal on my Android smartphone: no syncing, but native caldav between server and smartphone...
    The other option would be to install openvpn on your server and always work via your VPN.
    Last edited by zenlord (2011-03-24 17:57:54)

  • Purchase Order Approval through Mobile Phone / BlackBerry

    Dear fellows i am interested in Purchase Order Approval through Mobile Phone / BlackBerry. I have seen MSCA Mobile Supply Chain Application Guide but that is for telnet only devices and specific to supply chain. What are setup requirements to make PO approve though "Web App" or "Mobile App" as show in below image URL. We need to work it primarly on BlackBerry.
    http://www.exforsys.com/images/OracleApps/t10_files/image010.gif
    That will require logging in to EBS through Mobile and Making EBS available on Public IP !?! If this all fuss needs to be done then is there some Notification Alert type mechanism which sends email, but here a user could also reply that email with keywords to Approve or Reject that PO !?!
    Thank you.

    Dear Hussein, ur links are iPhone specific and also BPEL Connector specific ("Oracle Buisness Approvals for Managers" BPEL Connector). The links for Blackberry assume that i am atleast already getting emails on blackberry through EBS. Our env is through MS Exchange Server. Where as i believe from ur suggected docs that the EBS needs to have its own direct setup with blackberry
    In our current env we are using Oracle Alerts to Just send an email to user that PO for approval is waiting. We are NOT using "Oracle WorkFlow Notification Mailer". For blackberry will we be locked to use Workflow Mailer (i see patch 6802716 pre req also)!?! or we can still use simple Alerts!?!
    following thread says type "approve" in reply whereas metalink guides tell a URL to click in email. will it be a ...
    href="mailto:[email protected]?body=approve"
    type URL!?!
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/po-approval-through-mail-3077383
    ===============================================================
    There are a couple of steps that need to be complete before this will work.
    Pre- Req's
    1. Associate all apps users / approvers with email addresses
    2. sync apps users with workflow
    3. Check workflow users to make sure email is set to HTML.
    4. Configure and enable workflow mailer. You will need configuration information for the email service being used and a mailbox on the email service.
    5. Send a test message from workflow mailer to an apps user.
    If this is successful, then email based approval will work. If the user tries to approve using a smart phone (blackberry, etc.) they will have to hit reply and type approve as the message for approval to work.
    this guy also points to this idea.
    http://secure.meetingexpectations.com/oaug/eLearning/elSchedule.aspx?DayOfWeek=3&mtd=8/1/2007
    ===============================================================
    August 21, 2007
    Session 2
    August 21, 2007 12:00 PM U.S. Eastern (New York) Time
    Approving Requisitions/PO’s in Oracle E-Business Using Blackberry Devices
    Presentation of a solution using Blackberry Devices to approve requisitions and purchase orders in Oracle E-Business Suite. This solution required creating a text message to send to Blackberry users, and modifying the Workflow Java Mailer to be able to correctly read the default messages being sent back from blackberry devices. In addition, profile options were created that allowed simple key strokes to be translated into Approve or Reject options recognized by Oracle Workflow Java Mailer.
    Session Closed
    Presenter, Company: Bolton Carroll, The Revere Group
    this one too...
    =========
    http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/iexpense-approval-via-blackberry-and-iphones-3047841
    This one is DIFFERENT!
    METALINK: List Of Certified Devices For Mobile Field Services and Field Service Wireless [ID 793392.1]
    ========================================================
    Also, recently we have developed something called 'MiniWireless Server', which is a light weight server replacement of Oracle Wireless Server and can be run along with Mobile Server of Oracle Lite. Please refer Metalink note 758680.1 for more details. You may want to communicate this to customer if they are planning for fresh implementation.

Maybe you are looking for