Unable to configure ML-MR Card

I have an ML-MR 10 card. I cannot figure out how to get the ONS 15454 to recognize it. I insert the card. I then the card and right click. I go to Ethernet and there is not an ML-MR Card. There is a ML1000 and an ML1000T. I really am not sure how to install and configure this card. I just need to get the card working to test some SFP's

Jim,
Just wanted to clarify you were able to add the ML-MR card now correct? In order to get into the card via the IOS selection in the card view you want to following the below steps...
1. open notepad in windows
2. paste the following in notepad
hostname router1
enable secret cisco
line vty 0 4
password cisco
end
3. save the file on your desktop (i.e. ML.txt)
4. Go back into CTC and go to the card
5. click on IOS startup config
6. Select Local-->TCC
7. Browse to and select the .txt file you saved on your desktop
8. Click Yes on the prompts that come up
9. Right click on the ML card and click reset
10. Once it is done reloading you should be able to login to the IOS with cisco as both your user and enable password.
11. From there just enable the ports(no shutdown) you plan on plugging your SFP's into
12. Loop back port with fiber and verify port comes up.
Hope this helps. Good luck. Let me know how it works out for you.
Thanks,
Ryan

Similar Messages

Unable to configure Outlook with ASA firewall and IWSVA

Dear Sir,
We are unable to configure MS outlook in our network which is having IWSVA proxy and cisco ASA 5510 firewall.
snapshot of outlook error details are attached for your reference.
In our network L3 is behind IWSVA which is behind cisco ASA 5510.
when we change following NAt rule and ACL incoming rule it works fine
nat (inside,outside) source static any interface unidirectional
nat (inside,outside) source static obj_Proxy interface unidirectional
access-list 100 extended permit ip any any
access-list inside_access_in extended permit ip object-group Proxy_Server any
all required ports are allowed in IWSVA also please tell me if we have to make any changes in IWSVA like mapping ports etc.
Thanks in advance
Regards:
Anand Singh Dhouni

Hello Anand,
I already replied to you on the other post, Please mark this as answered so we can focus on one ticket and avoid duplicates.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha Muyida

Hi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha

Adobe plugin for Outlook in 2013 unable to configure to load at startup

Windows 7 Pro, Office 2013 Home and Business
I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
Any ideas?

Hi jeremyh77032804,
Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
Do you have the administrative privileges to this location specified above?
Please let me know.
Regards,
Anubha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
Thank you

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also see:
https://discussions.apple.com/thread/6282459?tstart=0

UNABLE TO CONFIGURE ODSM(oracle directorey service manager_

Hi ,
I am unable to configure ODSM with weblogic and getting the following error
"ERROR while deploying the application ODSM
cause:
An internal operation has failed :weblogic.management.DeploymentException:[J2EE:160149]Error while processing library refrences ,unresolved application library refrences defined in weblogic-application.xml:[Extension adf.oracledomain.com)
Thanks
Giridhar

Hi Giri,
Install the Java Required Files (JRF) in the Managed Server where you want to deploy your
application to.
NB: Java Required Files (JRF) consists of those components not included in the Oracle WebLogic
Server installation and that provide common functionality for Oracle business applications and
application frameworks. They include the ADF Runtime Libraries.
Regards,
Kal

HT3702 I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

Hi,
I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

What sort of card are you trying to use ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

Am getting this message when i try to play music " unable to configure network stream"

am getting this message when i try to play music " unable to configure network stream"

Hold on... advice to someone downloading from 1337x !!!
Until I saw your comment and googled the term, I had no idea that this was a "downloaded" file. I assumed the "1337x" reference was to dimensions/resolution and Noir referred to genre. (I.e., I use similar notations the differentiate files compressed for TV playback comparisons.) In any case, the advice is the same irrespective of the source.
er, isn't it illegal to download movies ?
Not necessarily. Thousands of movies are probably downloaded daily as legal purchases from such vendors as iTunes. Thousands more are available for free in the public domain, open source/community videos listings, and under Creative Commons Licensing. In short, there are many legal sources of downloadable content and you should not automatically jump to the conclusion that everyone is a crook.

I am unable to change my credit card number, because my profile shows United States therefore it does not accept the phone area code, and zip number, because I live in Switzerland. Please inform me how to do it. Many thanks.

I am unable to change my credit card number because my apple profile shows me as a resident of the United States, although I live in Switzerland. Consequently I cannot edit my area code, zip number, State info, etc. Please advise me how to do it. Many thanks.

Hello Luis,
To update your billing information, you would need to change your iTunes Store country to be able to enter the information for Switzerland. I found an article with the steps to update this:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I have found a person who has a driver software to connect Labview with PCI card. But he says that i need to download a freeware software to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ??

I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??

I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.

"Unable to Write to SD Card"

I received the message "Unable to write to SD card" while trying to export some data from an app to my SD card. How do I regain the ability to write to my SD card?

CellDaddy,
I'm happy to help with your SD card. What information are you trying to move from the application? Does this happen on multiple apps? If you go into Settings>SD card, what is the available storage for the card? If you insert the SD card into the computer, are you able to view the files properly? Let me know!
Thank you,
AdamE_VZW
Follow us on Twitter @VZWSupport

Unable to configure the router.

I bought a router today and I'm having some trouble getting it working. Iinserted the CD and followed the on-screen installation settings including unplugging the modem/router, then plugging it back in, etc. I got to step 11 "Set the Router's Administrative Password" before I had problems. I went to set the password, but I got the message "Unable to configure router. Reset thr router to factory default settings by pressing the reset botton for 5 seconds." I reset the router, but still got the error. Using a quick search I found a similar problem and following the steps on there, pinged 192.168.1.1 with 4 replies. I connected to192.168.1.1 through my browser just fine as well, but I still can't get past step 11.

Have you configured hyour wireless settings on the router and your computer? This has to be done.
For cable go here
Wireless go here.

HT4489 I am unable to import my v-cards to the cloud?

I am unable to import my v-cards to the cloud? they are simple .vcf files and are only about 4kb in size. I orginally exported them as vcards from Microsoft oulook and do understand there could be potential interface issues. any resolution to this??

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"

I am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.

I am attempting to change my country from US to Canada and I keep getting that the newtork is refused and I am unable to redeem Canadian gift cards. Please help?

I am attempting to change the country fro US to Canada and I keep getting that the network is refused??? hence unable to redeem Canadian gift cards. Please help.

Is your iTunes account address, and other payment method(s) ((if applicable) associated with Canada? They have to be to use that Store.

Unable to configure ML-MR Card

Similar Messages

Maybe you are looking for