Unable to configure SSO in Oracle11g

Hi,
I have tried to install and Configure SSO in Windows 2008 R2 server (64bit). I am facing issue with SSO Metadata repository installaion, please helpful on that.
Steps I did
1. Installed Oracle 11g R2
2. Installed Oracle WebLogic Server (10.3.3)
3. Run the RCU to create repository for IDM and SOA Suite
4. Installed SOA Suite 11g (11.1.1.2.0 && 11.1.1.3.0)
5. Installed Oracle Identity Management (11.1.1.2.0 && 11.1.1.3.0)
6. Configured Oracle Identity management
When i run the SSO Metadata Repository Creation Assistant (10.1.4.3.1), it is completing without any installatin progress. Also i didn't 64bit version in downloads.
Please help me to resolve the SSO configuration issue.

Which SSO you are trying to add ?
1. Is this Microsoft SSO i.e. Kerberos ?
2. Oracle 10g SSO a.k.a OSSO ?
3. Oracle Access Manager SSO
Looking at installer "SSO Metadata Repository Creation Assistant (10.1.4.3)" it looks like you are trying to use 10g OSSO , is there any reason for using this ?
10g SSO is mergning to 11g OAM SSO so 11g OAM SSO is one you should use if this is new implementation.
For 10g SSO what error message you are hitting ? Which document you are following ?

Similar Messages

Unable to Interpret SSO Ticket Recieved.

Hai ,
While working in ESS , I tried to create travel request. While creating i recieved Error message.
Error: System is Unable to Interpret SSO ticket recieved.
Kindly Help me out.
Regards
ArunRajan,
Hosur

Hi,
Please check tha SSO is configured correclty & test is fine from both Portal & Back-end side.
Please refer to
[http://help.sap.com/saphelp_nw70/helpdata/EN/4d/dd9b9ce80311d5995500508b6b8b11/content.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/4d/dd9b9ce80311d5995500508b6b8b11/content.htm]
In case you still face an issue, then please let me know.

Configuring SSO

Hi
I am trying to configure SSO using Tim's Document. I was able to successfully configure windows AD & i am able to log into infoview,CMC & the client tools using AD authentication.
Now hen i am trying to modify the web.xml as mentioned in the guide, I am unable to launch the infoview it is giving 404 error message. Also i have observed the no of comments as mentioned in the document do not match(<1-- , -->). whenever i edit the comments section i am getting this issue.
Business Objects Version 3.1 + SP3

The moment i uncommnet the section for inserting idm.realm & idn.prin i get the error message
HTTP Status 404 - /InfoViewApp/logon.jsp
type Status report
message /InfoViewApp/logon.jsp
description The requested resource (/InfoViewApp/logon.jsp) is not available.
Apache Tomcat/5.5.20

Unable to configure Outlook with ASA firewall and IWSVA

Dear Sir,
We are unable to configure MS outlook in our network which is having IWSVA proxy and cisco ASA 5510 firewall.
snapshot of outlook error details are attached for your reference.
In our network L3 is behind IWSVA which is behind cisco ASA 5510.
when we change following NAt rule and ACL incoming rule it works fine
nat (inside,outside) source static any interface unidirectional
nat (inside,outside) source static obj_Proxy interface unidirectional
access-list 100 extended permit ip any any
access-list inside_access_in extended permit ip object-group Proxy_Server any
all required ports are allowed in IWSVA also please tell me if we have to make any changes in IWSVA like mapping ports etc.
Thanks in advance
Regards:
Anand Singh Dhouni

Hello Anand,
I already replied to you on the other post, Please mark this as answered so we can focus on one ticket and avoid duplicates.
For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com
Any question contact me at [email protected]
Cheers,
Julio Carvajal Segura

10g - how to configure sso with iis-

hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?

hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
     saw.odbc.connection.open
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
---------------------------------------

Configuring SSO to a URL iView

hi everyone......
i'm relatively new to EP....
and my requirement is.....
i've created a URL iView and when i logon to the portal.....i need my <b>yahoo or gmail inbox</b> to appear in this URL iView.....
i read frm a thread that i need to confgure SSO for this by creating a system....
can u plz guide me how to configure SSO and also the usermapping.......
help is highly appreciated....
thanks and regards,
Sudheer

Hi Sudheer,
Please Ensure The following:
SSO with Yahoo:
UPLOAD:
1.Upload the par in PCD
SYSTEM CREATION:
1)Create ->System from par -> select com.sap.portal.howtos.webapp -> web application->give name & Id
2)Properties-->object->system definition
       Name of the server : login.yahoo.com
       Port : (empty)
       URI :/config/login
3)create alias
4)set user Mapping
IVIEW CREATION:
1)Iview from par
2)Iview type:com.sap-appintegrator.sap
3)template:generic
4)Properties Setting:
     System : (system alias name )
     URL Template :<System.protocol>://<System.server><System.uri>?<Authentication>
     URL Template fragment for UserMapping: <System.protocol>://<System.server><System.uri>?<Authentication>
Regards,
Ramganesan K.

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Unable to configure reporting services on Web(sharepoint) server where DB(SQL )server is insatlled on another machine.

Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha Muyida

Hi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha

Adobe plugin for Outlook in 2013 unable to configure to load at startup

Windows 7 Pro, Office 2013 Home and Business
I don't see a registry key for the plugin, there's no properties in Outlook for the plugin
Manually loads properly and functions properly, however unable to configure it to load when Outlook starts.
Any ideas?

Hi jeremyh77032804,
Please open Outlook and go to 'Tools > Options > Add-Ins' and select 'COM Add-ins' option under Manage label and click Go.
From the new dialog box that appears, select Acrobat PDFMaker Office COM Addin and click OK.
Also, please confirm the location of PDFMaker add-in is under "C:\Program Files (x86)\Adobe\Acrobat 11.0\PDFMaker\Mail\Outlook"
Do you have the administrative privileges to this location specified above?
Please let me know.
Regards,
Anubha

Error while configuring SSO between Portal 7.0 and Operating System.

Dear all,
I am having an issue,i need to configure SSO between the Portal 7.0 and operating System.I have followed both the Kerberos as well as spNego wizard methods,but i am not able to configure UME settings as we are using datasourceConfiguration_abap.xml. I tried to edit the datasource confuiguration file but after editing the server is not starting.
Please let me know the steps i have to do to edit the datasourceConfiguration_abap.xml
We are not able to Map the Service USer to the UME CONFIGURATION XML File.
Thanks
Ravi.S

Ravi,
If you have successfully configured the SSO, please pass on the document if any you have.
Regards,
Mohammad.

UNABLE TO CONFIGURE ODSM(oracle directorey service manager_

Hi ,
I am unable to configure ODSM with weblogic and getting the following error
"ERROR while deploying the application ODSM
cause:
An internal operation has failed :weblogic.management.DeploymentException:[J2EE:160149]Error while processing library refrences ,unresolved application library refrences defined in weblogic-application.xml:[Extension adf.oracledomain.com)
Thanks
Giridhar

Hi Giri,
Install the Java Required Files (JRF) in the Managed Server where you want to deploy your
application to.
NB: Java Required Files (JRF) consists of those components not included in the Oracle WebLogic
Server installation and that provide common functionality for Oracle business applications and
application frameworks. They include the ADF Runtime Libraries.
Regards,
Kal

Configure SSO for ITS to R/3 using SNC/Kerberos

Our R/3 systems had been configured for SSO using SNC and Kerberos for awhile now. We now have a requirement to configure SSO between ITS and R/3. Since our R/3 env. has been using kerberos library, we won't be able to use SAP Cryptographic library. I had modified the registry, environment and services in itsadmin to point to the kerberos library and principal names for agate and r/3 servers as described in SNC User Guide; also, I updated table SNCSYSACL with the Agate SNC name. That seems to work fine. From the trace file, it recognized GSS-API library for Kerberos and the SNC name for Agate. However, when I tried to logon to R/3 from ITS, I still am being prompted with the logon screen to enter my SAP account/password.
I found several whitepapers and documentations stating that ITS does support Kerberos for SSO but I couldn't find any procedure on how to implement it. Following is the error I'm getting from the sapbasis.trc file but I can't find any document on this error:
=====================================================
[Thr 5284] SncInit(): Initializing Secure Network Communication (SNC)
[Thr 5284]       PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
[Thr 5284] SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "C:\WINNT\system32\gsskrb5.dll".
[Thr 5284]   File "C:\WINNT\system32\gsskrb5.dll" dynamically loaded as GSS-API v2 library.
[Thr 5284]   The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
[Thr 2888] Sun Jan 15 22:44:59 2006
[Thr 2888] <<- ERROR: SncSetParam()==SNCERR_PARAM_DENIED
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
[Thr 2888] Sun Jan 15 22:45:29 2006
[Thr 2888] *** WARNING => NO Domain! domain==NULL means: No domain at all within the cookie. [sapss1_loctr 333]
=====================================================
Does anyone know what am I missing? Any help is greatly appreciated.
Thank you!
Diem

Hi Markus,
I also just installed/configured PAS for LDAP authentication using the "PAS for External Authentication Mechanisms" documentation. I think the domain problem probably due to not having the external authentication mechanism install (in this case - PAS). Does that sound right to you?
I tried both options for ~extid_type parameter = "LD" and "UN". I added the DN information to table USREXTID when ~extid_type="LD" but both options gave me error of "LDAP authentication failed". I increased the trace level for sapextaut.trc but I don't see enough detail information. Following are the errors/data from the trace file. Can you please let me know how I can tell what string is being passed for authentication?
I'm quite sure the LDAP host and port data is correct since we've been using the same information for the SAP LDAP connector and we've been using our LDAP connector between MS AD and R/3 for a long time without any problem.
To logon to R/3 through ITS, I entered the AD account (CN attribute in AD) when I got the errors.
Thank you very much for all your help.
Diem Tran
Trace:
=====================================================
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 437]: W sapextauth: PAS session begins...
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 456]:     sapextauth: SncNameR3 is:    "p:na1adm/[email protected]"
2006-01-18T01:39:30.734 p001688 t4992 s0158B4E8 [sapextauth, 462]:     sapextauth: SncNameAGate is: "p:[email protected]"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 468]:     sapextauth: SNC_LIB is:      "C:\WINNT\system32\gsskrb5.dll"
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 568]:     sapextauth: XGatConnectSession leaving....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:30.750 p001688 t4992 s0158B4E8 [sapextauth, 993]: W Either ~login or ~password missing, returning XGDKRCloginrequired.
2006-01-18T01:39:50.281 p001688 t4992 s00000000 [sapextauth, 398]:     sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:50.281 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1059]:     sapextauth: LDAP port ist 389
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:50.296 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
2006-01-18T01:39:59.140 p001688 t4992 s00000000 [sapextauth, 398]:     sapextauth: XGatEventOpenSession called...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 616]:     sapextauth: XGatHandleLogin called....
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 976]:     sapextauth: Entering XGatHandleLogin with LDAP...
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1059]:     sapextauth: LDAP port ist 389
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1261]: E sapextauth: LDAP authentication failed.
2006-01-18T01:39:59.156 p001688 t4992 s0158B4E8 [sapextauth, 1277]: E sapextauth: Wrong try for user Tran_Diem
=======================================================

Am getting this message when i try to play music " unable to configure network stream"

am getting this message when i try to play music " unable to configure network stream"

Hold on... advice to someone downloading from 1337x !!!
Until I saw your comment and googled the term, I had no idea that this was a "downloaded" file. I assumed the "1337x" reference was to dimensions/resolution and Noir referred to genre. (I.e., I use similar notations the differentiate files compressed for TV playback comparisons.) In any case, the advice is the same irrespective of the source.
er, isn't it illegal to download movies ?
Not necessarily. Thousands of movies are probably downloaded daily as legal purchases from such vendors as iTunes. Thousands more are available for free in the public domain, open source/community videos listings, and under Creative Commons Licensing. In short, there are many legal sources of downloadable content and you should not automatically jump to the conclusion that everyone is a crook.

Problem in configuring SSO using SAML for applications hosted on diff m/c

Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PM

Hi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod

Unable to configure the router.

I bought a router today and I'm having some trouble getting it working. Iinserted the CD and followed the on-screen installation settings including unplugging the modem/router, then plugging it back in, etc. I got to step 11 "Set the Router's Administrative Password" before I had problems. I went to set the password, but I got the message "Unable to configure router. Reset thr router to factory default settings by pressing the reset botton for 5 seconds." I reset the router, but still got the error. Using a quick search I found a similar problem and following the steps on there, pinged 192.168.1.1 with 4 replies. I connected to192.168.1.1 through my browser just fine as well, but I still can't get past step 11.

Have you configured hyour wireless settings on the router and your computer? This has to be done.
For cable go here
Wireless go here.

Unable to configure SSO in Oracle11g

Similar Messages

Maybe you are looking for