Unable to confirm alerts

Hi,
I have configures the alertframe work to send messages when ever a message is not processed. I create a mail with a link to the message, and that works just fine.
When the next problem arises with the same adapter, I don't get any alerts.
When I log into my alert inbox, don't see any messages/alerts. When I try to add subscription I get that I cannot load the page /sap/bc/bsp/sap/alertsubscription/subscribe.htm?sap-client=001. I'm unable to find that service in SICF and have tried the report to start it.
In the alert framework log I get the following messages, when the system tries to create the new entries in the log table.
20100507103918,7810000          0 07.05.2010    12:39:18      D095297433694D58091EB3D3F5B20671
*Calling Monitoring Server starting new task
20100507103918,7960000          0 07.05.2010    12:39:18      D095297433694D58091EB3D3F5B20671
AlertRecords successfully delivered
20100507103918,8120000          0 07.05.2010    12:39:18      D095297433694D58091EB3D3F5B20671
*Error records received from IE on host PIP (sysid: PIP client: 001 ). Try to send Alert...
20100507103918,8120000          1 07.05.2010    12:39:18      D095297433694D58091EB3D3F5B20671
*Find rule for (From::SalesInv_BC2:SalesInv_OB_Async:http://domain.com/SALESINVOICE To::CSPCLNT100:InterfaceCollection:http://sap.com/xi/XI/Sy
20100507103918,8590000          0 07.05.2010    12:39:18      D095297433694D58091EB3D3F5B20671
*Call SALRT_CREATE_API(From::SalesInv_BC2:SalesInv_OB_Async:http://domain.com/SALESINVOICE To::CSPCLNT100:InterfaceCollection:http://sap.com/x
20100507103919,2960000          0 07.05.2010    12:39:19      D095297433694D58091EB3D3F5B20671
*Alert created:<AlertId:00000><RuleName:PI problem><AlertCategory:PIPROBLEM>
20100507103919,2960000          1 07.05.2010    12:39:19      D095297433694D58091EB3D3F5B20671
Alert Category 00O2TG5N6YUAVD3MRDXA2QTMA in rule Adapter problem not yet confirmed. Skip creation of new Alert.
So Can I make the alerts accepted or can I ignore the previous rules created.

Check if your alert rule (In alert config) has the check box, "Suppress Multiple alerts for thesame rule" checked.
If yes, you can uncheck that check-box.
Regards,
Ravi

Similar Messages

Unable to confirm transfer order due to error message "enter a storage unit

Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva

BPM: Confirming Alerts - pro's and con's.

Hi all,
In Business Process Monitoring in the alerts view, you have the option to confirm alerts - primiarly I assume to remove the yellow or red alert status from the summary screen of alerts, so that operators can see at a glance which monitors have a status other than green. Other than that - what are the benefits and drawbacks (if any) of confirming /not confirming alerts?
Would there be any concerns with system performance / table overflow by keeping many unconfirmed alerts in the list?
From a BI trend analysis point of view, will both confirmed and unconfirmed alerts be transferred to the BI cube for trend reporting?
For example, we could configure BPM to send a notification when there are 20 yellow alerts of a certain type. Only on notification (email) will a user go into BPM to view the alert in more detail. So, the number of alerts in BPM could add up very quickly and only get confirmed every so often.
Thanks,
John

Hi,
1) Your understading is correct to some extend, the confirmation of alert is to know the status of any new alerts at an istance. so it forms easier for us to locate. Confirming should be done, if the alert is really looked upon and solved, so easy to track. If you keep it unconfirmed, you ll always get the old alerts in queue leading to the overall rating to be misleading sometimes.
2) You have to plan/so sizing on your solution manager accordingly to negate any system performance issues.its impact will be very less.
3) yes.You wil get all the alert.You can see all the confirmed alerts too.(there is an option available).
4) This shouldn't be an issue:). The alerts remain the same in the BI. Sizing matters.
Thanks,
Jagan

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to confirm TO with HU

Hi Gurus,
We are unable to confirm the Transfer orders for deliveries . If we are trying to confirm the transfer order we
getting the following error message " Message no. L3858 Material quantity in source HU is not sufficient for TO item".
I have created a HU before confirming the TO and after creating the HU, i am getting the above error.
Please kindly help us in this regard.
Regards,
tc.

Hi Sekkhar,
Just to share the solution in the comunity.
The problem in your case was that the HU records had a batch number maintained on the VEPO (HU Item level) record while the LQUA (Quant table) record doesn't. In MM also there is no batch value maintained. The VEPO record should be updated to remove the CHARG value. The material is not batch managed.
Then SAP repaired the data in order to allow the operation.
Please close this message as per the solution was provided and information were shared.
Best Regards,
Christian Rosa

Javascript confirm alert Can we change the text ok

can we change the ok and cancel text in the javascript confirm alert. pls respond, its very ungent
Edited by: Bini John on Jun 10, 2009 9:19 AM

Hi,
Yes if client want new description for the PS Group, you have to create new only and assign the wage types to them and so on..... you have to do all the configurations regarding the PS Group. Here the main point is be careful with the start date of the PS Group for newly created records and assignments.
Best Regards.

Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

We have been seeing this error in the Operations Manager Event Log for quite a while.
Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: MMEA_1348391424
Instance name: aaa.bbb.com
Instance ID: {88AED57C-5627-0C0B-E5C1-A9176A7E64CD}
Management group: SCOMr2
I haven't been able to spot any network outage on the management servers, or the database servers to indicate a problem. It usually happens at night, and when I look at the health explorer, the entity is healthy.
Please would someone help me in finding the root cause of this issue and what can be done to avoid it.
There were no backups running when this alert was generated. As far as I'm aware, everything was idle.
I would appreciate any help.
Karan

Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
Based on the Error it seems the below for me
1. Either SCOM is unable to connect to the operationsmanager / operationsmanagerDW for its transactions on subscriptions
2. Or the SMTP server which your SCOM is using to relay emails has closed the connection.
So my suggestion would be you check the above for issues.
Gautam.75801
There were no network hiccups that I can see. Minimal disk activity. I've looked for any signs of database load, and haven't seen anything that jumps out.
Emails were going through just fine. These alerts get emailed to me, and if the SMTP server is 'closed' SCOM is usually quite sensitive and alerts about that too. I've seen it.
KB

CONFIRMATION alert

hello!
one problem
if I have a CONFIRMATION alert, how can i make it to display OK and Cancel buttons plus how can I get information, whether user has clicked OK or Cancel? something like confirm function in JavaScript, which returns true or false
thanks a lot

Your Alert is a Displayble (check in javadoc) ... so you just have to had 2 Command ... one for the Yes and one for the No.
Then you set the CommandListener with the instance which will receive the events. (you can select the current instance ... this ...that implements CommandListener)
And you just have to implement the commandAction method of the interface to process the events :
import javax.microedition.lcdui.*;
public MyGUI extends Alert implements CommandListener
public MyGUI() {
super();
// Here you will create the 2 Command and add them to the Alert
setCommandListener(this);
public void commandAction(Command c, Diplayable d) {
// where c is the command that the user has selected
// and d is the displayable that triggered the event (your Alert in this case)
}

Technical Monitoring - Report confirmed alerts

Hi experts,
I already googled but couldn't find a solution.
Where can I see ( I guess in workcenter) confirmed alerts?
I mean, in technical monitoring, I get an alert and after confirming I don't know where to find this.
Kind regards

Hi Christian,
Did you check this in preferences.
If you have this option then you can do a search.
Goto Alert Inbox and check on top right corner -- Preferences
Divyanshu

Business Process Monitoring: restrict authorization to confirm alerts

Hello Experts,
I am working with Solution Manager's Business Process Monitoring and I am now facing these questions regarding roles and authorizations to allow/forbid alert confirmation:
- What is the authorization mechanism behind alert confirmation in BPM? Is a specific authorization object involved when pressing the button "Confirm selected"?
- Is it possible to adjust roles (if no standard role is available) in order to have, for example,
--Role1: give users the authorizations to walk through DSWP transaction, see business processes' alerts and confirm them
--Role2: give users the authorizations to walk through DSWP transaction, see business processes' alerts but NOT allow them to confirm any alert?
Our Solution Manager version:
SAP EHP 1 for SAP Solution Manager 7.0 (SP22)
ST-PI 2008_1_700 level2
ST-SER 701_2008_2 level 6
ST-A/PI 01M_CRM570
I hope I managed to explain my doubts properly; any help will be very appreciated.
Thanks in advance for your support,
best regards
Paolo

Hello Paolo,
it is the first time that I hear that request. Can you explain what your use case is? Why would you allow some users to see and analyze alerts but do not let them confirm the alerts if the problem is solved?
As the user/date/time is logged if somebody confirms you have the transaparency who confirmed which alert at what point of time.
I think that currently no such split in authorizations is supported but perhaps you can find something in the securtiy guide.
Best Regards
Volker

BPM: Confirming alerts doesn't refresh alert status

Hi Colleagues,
Have anyone dealt with refreshing problems in Solman's BPM?
If I have a red alert and process it, I proceed to confirm the alert.
In this node, status is changed to green (some cases into grey).
If I get back to the first screen in the BPM, process is still in red leading to confusion to our local monitoring team. It doesn´t matter that no other alerts are current unconfirmed.
You can refresh as many times you want, system remains in red.
I have a message in support but response process is really slow.
They just recomended to apply latest version of note 0001255970 but no effects were observed.
We are in ST 400 SP 17.
Thanks,
Renato Petrulis

Just as feedback from SAP Support, it´s not an error:
(...) Let me explain the difference between Current Status and Open Alerts a
little more:
Every MTE (MTE: Monitoring Tree Element. It is the actual measurement that you are interested in. For example, BDocs con ErrorBDocs con Error defined in component BDocs con Error is an MTE) has configurable thresholds. The thresholds define the values which, when exceeded, create an alert instance. Both yellow and red thresholds can be defined. The alert instance records the time at which the threshold was exceeded,and also have a corresponding status i.e. if the red threshold is
exceeded, a red alert instance is created. When you hit the 'Confirm' button, you are actually clearing the alert instances.
Whereas, in the Current Status view, you actually see the current value of the MTE, which can be red or yellow or green irrespective of what hadhappened in the past.
Therefore, the expected behaviour is that when all the alerts are confirmed, the MTE shows green in the Open Alerts view. But the Current Status view continues to show the actual current status, which may be red or yellow or green. Therefore the DSWP transaction is actually working as expected.
Edited by: Renato Petrulis on Dec 11, 2009 3:31 PM

PO confirmation alerts in SUS portal

I created PO in R/3 and sent to vendor SUS portal.
Then vendor didn't confirmed PO so i sent alerts for PO confirmation to vendor.. Now when I am trying to see alerts in SUS portal, its giving error as: "Error in call of back end function for component AlertMonitorComponent: Message type is unknown., error key: RFC_ERROR_SYSTEM_FAILURE".
Please guide.

By PO confirmation I dont mean Goods receipt, but its PO acceptance by vendor.

Unable to see ALERT Category in RWB- Alert Config

Hi Experts,
I have created an Alert Category using Transaction ALRTCATDEF. I followed it as mentioned in Michal's blog.
In Runtime workbench --> Alert Configuration, under Select Alert Category, I am unable to see the Alert Category which I have created. Only if, I could see this Alert Category, I will be able to select this and Add Rule. I used filters to search and even tried to click Update Table. But still unable to see.
Why is it that I am unable to see the Alert Category which I have created. Basically, I login as PISUPER and created the Alert Category. Kindly advise.
Balakrishnan

Hi,
Check out the Alert Category created again in the ALRTCATDEF Transaction.
Refer this SAP note-750287
Check out this troubleshooting guide-
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Rgds,
Moorthy

206 unable to set alert only for certain group

Hi,
is it a symbian unwanted feature that user is unable to set Nokia 206
profile to alert for certain group (even though this kind of functionality is
available on this phone)?
To be more precise user is able to set profile to alert only for certain
group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
This feature has been available and workin in previous Nokia phones
since last decace - is it a software quality issue or what.
Best regards,
Hez

It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to pass parameter to function when confirm(Alert.show) closed?

<![CDATA[
import mx.controls.*;
import mx.events.*;
private function deleteItem(guid:String):void
Alert.show("Are sure you want to delete?", "Confirm Delete", Alert.YES|Alert.NO, this, alertClicked);
private function alertClicked(event:CloseEvent) {
if(event.detail == Alert.YES) {
Alert.show("yes "+guid); //<-- here I want to get guid
else if (event.detail == Alert.NO){
Alert.show("no ");
return;
]]>
Thanks.

Hi Itambs,
You can do the following:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="deleteItem('Dummy GUID VALUE')">
<mx:Script>
<![CDATA[
   import mx.controls.*;
   import mx.events.*;
   private var myAlert:Alert;
   private function deleteItem(guid:String):void
    myAlert = Alert.show("Are sure you want to delete?", "Confirm Delete", Alert.YES|Alert.NO, this, alertClicked);
    myAlert.data = guid;
    myAlert.height = 150;
                myAlert.width = 300;
   private function alertClicked(event:CloseEvent):void{
    if(event.detail == Alert.YES) {
       //Alert.show("yes "+guid); //<-- here I want to get guid
       Alert.show("yes "+ myAlert.data);
    else if (event.detail == Alert.NO){
       Alert.show("no ");
       return;
]]>
</mx:Script>
</mx:Application>
Note: you can also do this in another way by decalring a global variable guid as ...... private var _guid:String="";
set _guid = guid; in deleteItem() function and then in alertClicked() function you can access the value as _guid again...which holds the saved value...
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

Unable to confirm alerts

Similar Messages

Maybe you are looking for