Unable to connec to to WLAN using Acces Connection.

Just replaced my HD with a SSD. Reinstalled Windows 7.
Biggest problem I have now is hat I am unable to connecto to my WLAN network using Acces Connections.
Acces Connections is seeing the network and let me input the security key but after that informs me: Connection Failed.
I do the same with Windows Wireless Network Connections the laptop connects with NO problem.
Also after connection the Acces Connections is showing Windows Wireless Service is connected.
How can I change it so Acces Connections is managing my connections again??
Lenovo X200T Tablet
Windows 7 Ultmate

Hi VEJ,
I don't have a Win 7 machine with wifi handy to check, so I don't quite remember where to find this
Go to network and sharing, and bring up the list of wifi networks managed by Windows. Delete the one that's giving you trouble. Try reconnecting in AC. If AC grabs it first, it will probably work the way you want.
I'll go grab a Win 7 laptop ASAP and try to come back with better instructions...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Unable to configure Linksys E2500 to use PPPoE connection

I am using the Ubuntu Linux 12.04 operating system and have been able to use the Linksys E2500 router with Automatic Configuration – DHCP setting and my modem in PPPoE mode to use my DSL connection. But I would like to be able to use my router with the PPPoE connection setting so I can use a firmware like Tomato which has more advanced features like bandwidth logging.
I was able to log into the configuration page of my SpeedTouch ST516 modem and set it to bridge mode according to the instructions here: http://www.speedtouch.ca/bridgemode.php
I then tried to set up the router to use PPPoE according to the instructions here: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687
I get the message "Can not get an IP address from PPPoE" again when I try to set up the connection in step 4. Resetting the router does not help. I also tried running 'sudo service networking restart' and the 'sudo dhclient -r; sudo dhclient' in Ubuntu's terminal but still got the same message.
I double checked that I used right login information and vpi from my ISP. I used the same info to configure the modem to PPPoE mode again so I can connect to the internet. I had to reset the modem back to factory defaults using the reset button at the back to access the modem configuration page after I disconnected the ethernet cable from the router and plugged it into the modem.
Is there a possible bug with using PPPoE with this router? Is there anything else I can try besides what is stated in the instructions linked to above?

jaymay
"If you are getting an error "Can't get an IP from PPPoE Server", that would mean that it's possible that the account information you've typed in is incorrect or the modem is not set properly to bridged mode. You can test this by connecting your computer directly to the modem and create a PPPoE dialer. If it will let you connect successfully then you are using the correct username and password. If not then you might have to verify the correct info from your ISP."
> Again, "I double checked that I used right login information and vpi from my ISP. I used the same info to configure the modem to PPPoE mode again so I can connect to the internet." And yes I was also able to connect with a PPPoE dialer and computer directly connected to the modem.
"It could be possible that what you just need to do in the router is to change it's LAN IP address to a different range compared to what you are getting from the modem to avoid IP conflict. For more information about setting up the router with DSL connection, you may refer to this link: Setting up a Linksys router for DSL Internet connection."
> That link is exactly the same link in my sentence: "I then tried to set up the router to use PPPoE according to the instructions here: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687"
The router ip address used is set to http://192.68.2.1 which differs from the ip addresses of the modems I tried.

Unable to enable in web services using direct cable from my router

LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.

Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Error BEA-000438 - Unable to load performance pack. Using Java I/O instead.

On a Solaris 9 machime, 64 bits architecture, j2sdk1.4.2_08, Weblogic Server 8.1 SP2
          when I try to deploy the application, launching java wiht "-d64" option I get :
          <Jun 22, 2005 12:12:41 PM CEST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead.
          Please ensure that libmuxer library is in
          :'/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9/server:/export/home/j2se/j2sdk1.4.2_08/jre/lib/sparcv9:/export/home/Aplics/Apl1/WEB-INF/lib::/usr/local/bea/weblogic81/server/lib/solaris:/usr/local/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib'
          libmuxer exist on /usr/local/bea/weblogic81/server/lib/solaris
          Any idea?
          Thanks

          Can you post more details ?
          Sergi
          Jiffy <[email protected]> wrote:
          >error:
          > <2004-3-12 %u4E0B%u534815%u65F648%u520654%u79D2 CST> <Error> <Socket>
          ><BEA-000438> <Unable to load performance pack. Using Java I/O instead.
          >Please ensure that wlntio.dll is in: 'D:D:/bea/weblogic81/server/bin'
          >>

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

I am unable to change my screen brightness using the fn+f2/fn+f3 keys. i understand that it can stil

I am unable to change my screen brightness using the fn+F2/fn+F3 keys. I understand that it can still be adjusted differently but I want this way to work. Also whenever I change my volume using the fn+F7/fn+F8/fn+F9 keys, the little on-screen display doesn't pop-up any more. I would like to fix this and any help would be greatly appreciated.

Hi
You have a couple of options as I see it please find the web link given below and the steps might help you to fix your issue on the unit.
Resolving Problems with the Brightness of the Display
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Connect to wlan using eaptls

I prepared a configuration profile in ICU for authentication of my MAC in WLAN using EAP TLS with certificate. On MAC (Lion and Mountain Lion)
it works well. I applied the same profile to my iPhone (iOS 6.1.3) and Iphone does not join WLAN. On debug console I found
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Error>: Jul 19 16:06:35 SecTrustEvaluate [leaf ValidLeaf]
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: eaptls_handshake: SSLHandshake failed, errSSLPeerAccessDenied
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: en0 TLS: authentication failed with status 1001
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: en0 STOP
Jul 19 16:06:35 iPhone-JK wifid[14] <Error>: WiFi:[395935595.372837]: Failed to associate with AC: -369032215
Have anyone idea what should be a difference between ICU profile for MAC and iPhone/
Jerk55

Difference found A personal certificate in profile has expired while on Mac was renew.

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
India

You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried.

Unable to sync to the iTunes using PC

why my iPad unable to sync to the iTunes using PC where an error message shows "iTunes could not connect to the iPad because an invalid response was received from the device."

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115

Unable to load performance pack. Using Java I/O instead. Please ensure...

Hi there.
I am running WL 1033 development version using 64-bit 1.6.1 jdk (jdk-6u21-windows-x64) and the performance is terrible. I have upped my mem settings to this:
set MEM_ARGS=-Xms1024m -Xmx1408m -XX:PermSize=1024m -XX:MaxPermSize=1024m
and after a couple of deploys, I still get out of memory errors.
I notice this message on startup: <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in:
Could this be part of my performace issues? If so, how do I fix it?
I followed the install directions in the README.txt file from this zip file: wls1033_dev.zip
Mike

Hi Mike,
If you are using 64 bit of Windows Operating System then Make sure that you add the following directory in the *"java.library.path"*....
Directory: E:\bea1033\wlserver_10.3\server\native\win\64
Example: In your servers start Script please add the following MEM_ARGS or in JAVA_OPTIONS:
<b><font color=maroon>
set MEM_ARGS= -Xms1024m -Xmx1408m -XX:PermSize=1024m -XX:MaxPermSize=1024m -Djava.library.path=E:\bea1033\wlserver_10.3\server\native\win\64</font></b>
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic (Middleware Magic Is Here)

TS2529 what do i do when am unable to activate my iphone after using the itunes to update?

what do i do when am unable to activate my iphone after using the itunes to update?

I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.

I'm unable to scroll down the page using laptop touch pad.

My FF was updated automatically. I'm unable to scroll down the page using the laptop touch pad scroll option.
It was working fine on FF before upgrade and after upgrade on IE browser. But, in FF 9 it is not working. Any help is appreciated.

Type '''about:config''' in the address bar and hit Enter key. When you see a warning, click '''I'll be careful, I promise!''' button
-> In the '''Filter bar''', type '''trackpoint'''
* right-click '''ui.trackpoint_hack.enabled''' preference, click '''Modify''' and change the value from '''-1''' to '''0''' (zero) or '''1'''
* click OK
-> Close '''about:config''' tab and Restart Firefox
Check which value (0 or 1) works.
Not related to your problem but do the following:
-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
-> Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

I am unable to view videos in youtube using mozilla plz help

I am unable to view videos in youtube using mozilla plz help
duplicate of [/questions/1009851]
edit: for some reason this user shows as deactivated which I did not do.

Are you still able to view flash videos and games from other sites?
If so and are from India then youtube videos among many other sites were blocked. https://support.mozilla.org/en-US/forums/contributors/710463

After entering the Wlan password I can't use the „connect" button. The button is deactivated. Did somebody have a solution? I have an iPad 3 with IOS 8.0.2.

After entering the Wlan password I can’t use the „connect“ button. The button is
deactivated. Did somebody have a solution? I have an iPad 3 with IOS 8.0.2.

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

Unable to connec to to WLAN using Acces Connection​.

Similar Messages

Maybe you are looking for

Unable to connec to to WLAN using Acces Connection.