Unable to connect Blueberry PowerPC G3 to wireless network - error message 'invalid password'

I have just purchased a TimeMachine and am using it as wireless network. All the devices in the house (2 Mac laptops, 2 droid phones) are successfully connected.
My old Blueberry won't connect. The message it gives me is 'invalid password'.
The Blueberry is running 10.3.9. I don't think I can upgrade past that because it is a PowerPC G3.
Do I need to do some sort of conversion for the password?

Not sure about your original password problem, but your blueberry imac (i have the same model) will run all the way up into tiger.  (10.4.11 to be exact) you might have to have airport too.... But scince you bought the  time macine you probaby already took care of that.
Just tryin to help.

Similar Messages

  • TS1368 unable to connect with the apple itunes store. no error message, it just keeps "accessing" the store, and it is never successful. How do I overcome this?

    I am unable to connect with the iTunes store. ITunes keeps "accessing", but that can go on for an hour. No error messages. It just never connects. How can I overcome this?

    The question for me becomes what motivation do I  (Apple's customer) have to download Autoruns from Windows, open a compressed folder, try to determine which Winsock Provider is mine, check for updates and then run whatever it is I need to run to fix this.  All these steps just so I can access the Itunes Store and buy from Apple.  It would seem that Apple would find a fix on their side so their customers don't have to do this.  Is anyone from Apple listening???

  • Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

    I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
    A month later, I am unable to connect to internet or print wirelessly.
    It states that I am connected to my router.
    When I trouble shoot, it cannot find the problem.
    My wireless connection and cable connection are fine on the MAC side.
    Please help.

    looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router?  Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

  • Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

    Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik  

     

  • Unable to connect EA4500 with HP 1525NW wireless printer

    I recently switched from an old linksys router to a new EA4500.  Before I had no trouble connecting my wireless HP printer using the WPS setup.  However with the new EA4500, I tried multiple times without success.
    Here is a solution I found online.  It works.  I had to use the original installation disks that came with the printer to reinstall the software and manually - using a USB - connected my printer to my wireless network.
    Method three: Standard connection using a USB cable
    If your wireless router does not support WiFi-Protected Setup (WPS), you can use this method to set up the product on a wireless network. Using a USB cable to transfer settings makes setting up a wireless connection easier. After the setup is complete, disconnect the USB cable.
    Insert the software CD into the CD drive.
    Follow the on-screen instructions. When prompted, select the Connect through a wireless network option.
    Connect the USB cable ( ) to the product and the computer when prompted.
    CAUTION:
    Do not connect the USB cable until the installation program prompts you.
    When the installation is complete, print a Configuration Report to make sure that the product has an SSID name. Follow these steps to print a configuration report:
    Load plain white paper into tray 1.
    On the product control panel, press OK , and then press OK again to select Reports .
    Press the Right Arrow button ( ) to scroll to and select Config Report .
    When the Configuration Report prints, disconnect the USB cable ( ) from the product.
    You have completed the software installation. Do not perform any more steps in this document.

    Well it's never recommended to do WPS setup for printer.  Following the manual instructions like you posted is the best.

  • TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store.  An unknown error occured (-3212).  Also when I plug my iphone in to the computer it doesn't ever pick it up

    I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store.  An unknown error occured (-3212).  Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

    same here no solutions

  • Connecting HP Laserjet P1102W to wireless network (then getting drivers!)

    Hi,
    My macbook pro and HP LASERJET P1102W seemed to be communicating just fine when I had snow leapard.  Post update to Mountain Lion, problems.
    I have gotten the printer to work when connected via USB, however not consistently.  (Often it cannot recognize when paper tray is filled, cannot do two sided printing and has other issues perhaps connected to the fact that software is missing?) 
    I have read the documentation on HP site, noting that the only way to install drivers is via a network connecton and airprint which requires a network connection.
    Not sure this is the right place to ask this, but I will for now:
    How do I connect my printer to my network, which is a new home network as I just changed from DSL to Cable? 
    Note:  I had not previously ever connected my printer to my wireless network and set it up to work with Airprint, though that is one of the reasons I bought it.  
    Once I do connect the printer to my wireless network, perhaps then I can try to follow the steps on the HP site   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=4142&product=4110396&sw_lang=
    If anyone has experience with the above, I would love to hear it!
    Final question:  Is plugging the printer into the back of the new cable modem via ethernet or USB perhaps a way to put it on the wireless network?  Not a convenient location, but if only alternative, I would try it.
    THANKS!
    Ani

    Dear Happy-to-Help,
    I appreciate you logging in to help. I shall give this a shot in the next couple of days when I have more time and let you know how it goes.
    I have been quite frustrated by the fact that HP says if the HP Laserjet P1102W has worked fine with Snow Leapord and one upgrades to Mountain Lion, all the drivers will be automatically upgraded/updated (or whatever the term).  That has not been the case at all.   It took quite a bit to even get my computer and printer to talk to one another via a USB connection—with none of the functions of the printer (as noted above) working properly to this day.
    I hope your suggestion works.  Will be back in touch to let you know. 
    Ani

  • Problem connecting MBP to established Linksys wireless network

    just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
    Dell Dimension 8200, MBP 2.16   Mac OS X (10.4.6)   2 GB SDRAM

    To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
    As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
    the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

  • I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network.

    I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.

    Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
    If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names.

  • Ios6.1, now unable to connect to junos pulse. anyone else getting this message.  connecting using safari

    ios6.1, now unable to connect to junos pulse. anyone else getting this message.  connecting using safari

    Hello Irian and Sue,
    I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
    Used parameter files:
    D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
    *)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
    TNS-12537: TNS:connection closed
    Thanks for your response to my initial post.Do u have any other methods to resolve this?

  • Unable to connect to TOAD : ora:-12546 TNS Permission error

    Hi friends
    Kindly help me
    Am Unable to connect to TOAD : ora:-12546 TNS Permission error
    till 2 days before it was connecting.
    Dont know what happened now
    SQL*Plus and Forms 6i are getting connected.
    What can be the issue ?
    Regards
    Dora

    Hi
    ORA-12546: TNS: permission denied
    Cause: User has insufficient privileges to perform the requested operation.
    Action: Acquire necessary privileges and try again.
    Pls check the sites suggest by google
    http://dbmotive.com/oracle_error_codes.php?errcode=12546&type=ORA
    http://www.ironspeed.com/Designer/6.2.1/WebHelp/Part_V/ORA_12546_TNS_permission_denied.htm
    Thanks & Regards
    Srikkanth.M

  • We are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection

    we are unable to sign in to iMessages, wifi connection is fine but we get the error message, pls check your network connection.  Does anyone know how to fix this

    there has been a big problem with facetime and imessage. The best solution for this case is to restore your device http://support.apple.com/kb/HT1414
    Make sure you back it up. and I would set up facetime before you reinstall your backup and  make sure its working.

  • TS3899 Why am I unable to connect to server to check email? The message reads "cannot connect to server"

    Why am I unable to connect to server to check email? The message reads "cannot connect to server"

    Many things could cause this, for example, the email server is down or cannot be reached due to an Internet problem.

  • Graphite Connects to Someone Else's Wireless Network

    When I startup my eMac (10.4.8) I sometimes cannot connect to the internet via Airport. I discover, upon launching Internet Connect, that I am connected, but not on our wireless network. Instead, Airport shows me connected on something called "linksys" (which I assume is a neighbor's wireless network), and the signal is very weak. I can switch to our network via Internet Connect & all is well, but it's a hassle having to go through this every time. It used to be that I'd immediately be connected to our own wireless network & Airport upon startup. Help! How can I "teach" my Airport to always connect via OUR network & not "linksys"???

    Try each of the following, in order, until resolved:
    1. Run the Disk Utility to repair Disk Permissions.
    2a. Delete Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Delete the network(s) you regularly use from the list
    2b. Delete AirPort Keychain Entries
    - Launch the "Keychain Access" application located in Applications/Utilties.
    - Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    - Restart, or log out then back in.
    2c. Add Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Add the preferred network(s) using the "+" button.
    - Restart or log out then back in.
    3. Create a New User Account
    - Create a new user account.
    -- System Preferences > Accounts
    -- Click "+" to add a new account
    - Log off, then log back on with the new user account.
    - Try connecting with the AirPort.

  • Connecting HP Officejet 6100 to wireless network with OSX 10.9.5

    Running OSX 10.9.5.
    I'm trying to connect HP Officejet 6100 to wireless network without HP software since the software claims it is not compatable with my OS. 
    The printer works fine when connected via USB.

    Hi @dj2thew,
    Thank you for visiting the HP Support Forums! I see you are trying to add your HP Officejet 6100 to your Mac running the Mavericks 10.9.5 Operating system.
    Because you are using the Mavericks OS X you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Once you have installed the OJ 6100, you may notice the features you once had are limited or there are workarounds, for scanning with or without HP Software see below:
    How to Scan: OS X v10.9
    I hope this helps!
    Thanks again,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for

  • Printing persons authorised to process the purchase order

    dear friends,                     my requirement is I have to print all the names of persons who involved in purchase order processing i.e. we have some hairarcy to process the purchase order like jr. manager ,sr. manager, AGM, GM based on the worth

  • How do you display thumbnails in pdf files without having to open the file?

    i used ot be able to see them in teh file folder before we got windows 7. We use CS4 and reader XI

  • Bridge CS3 no longer renders RAW thumbnails

    Running PSE9 on OS 10.8.2 Mountain Lion.  Also running Bridge CS3 2.1.1.9 that I believe came bundled with PSE4 and which I have become fond of using as a tool for importing photos and other steps early in my workflow.  I shoot almost exclusively in

  • WebDynpro VS PDK

    Hi all, when should i use WebDynpro and when PDK ? What is the prefered Environment to write Internet Apps for SAP ? Will PDK have a future or is it old style development and we should use WebDynpro for our future Development ?

  • JBoss/Tomcat outOfMemoryError

    Hey I am working on an existing servlet architecture that my company created, and I am running into a memory problem when I try to view certain servlet pages. I am using JBoss-2.4.11 and Tomcat-4.0.6 (using catalina)for my test/debug environment with