'unable to connect communication error'

I am getting error when I try to connect to the iCloud from my Mac book pro. My AppleID is correct and able to connect from my iphone 5. I am not sure what could be wrong from the Mac. Any help is greatly appreciated. I have the latest OS installed on the machine.

Hi Stefan,
We are having the same issue with a customer who has moved to a new terminal server environment. We cannot get the users to connect to the DB from there, but SAP is connecting with no issues.
We have exactly the same message & have run through the same steps.
Did you manage to get this resolved, and can you remeber how?
Thanks

Similar Messages

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted?

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted? Thanks

Hi,
Thanks.
I have tried signing out and in, still does not work.
Still just get the previously mentioned "messages".
I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
Thanks

Vimeo video unable to connect. Error message says "video format or mime type is not supported.

Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

Hi,
This seems to be a Firefox error:
Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
Kindly check if you are able to view the video on Vimeo.
Also, try using another browser.
Hope it helps,
Sonam

LSO- BSP connection- Communication error

Hi
We have installed LSO FE and LSO BE. We are not using portal. When I am trying to use the BSP, it gives me a communication error.
Has anyone experienced this?

We figured it out. There was a need to create a RFC logical connection called SAP_LSO_BACKEND.

Lost Connection - Communication Error

Is it me or is IChat a complete piece of S**t. I have had my MacBook Pro for about a year now and love every other facet of it. I even managed to convince my father in the UK to purcahse one due to my rave reviews so that my parents could talk to my 18 month old daughter and I online in the USA.
He got his Mac and as if by magic we had no connection problems probably the 1st dozen times we tried to communicate via ichat. perfect picture great sound and it was wonderful. Since that eventful day we have been connected just once by chance it would seem. I have read forums and boards and we have tried changing ports etc and still nothing. We get the same message every single time - Communication Error.
We have both .mac accounts and aim accounts and neither will work. Can somebody please help us or I am afraid my Father is going to return his Mac and mine will become a very expensive paper weight and I will return to high end PC's.
Thanks........
Very frustrated

Hi Sb003,
Check these settings.
1) System Preferences > Sound > Input
Make sure correct Mic/input device is used and Volume gets to over half way.
2) Make sure iChat > Preferences > Video section > Microphone drop down is the same mic/input device.
3) Go to iChat > Video menu and make sure Camera amnd Microphone Enabled are ticked.
4) System Preferences > Quicktime > Streaming tab
The drop down in here should be set to match your download or a max of the 1.5Mbps/T1/LAN speed setting
It is most likely the last one of these.
10:02 PM Sunday; December 10, 2006

Ichat connection communication error

every time i try to use the video cht or screen sharing features in leopard i get a " There was a communication error while trying to...... " any suggestions? this is on a 1st gen mbp

Hi
Have you done the following?
iChat>Preferences>Video>Bandwidth limit: None (500kbps if Comcast, Road Runner or Verizon)
System Preferences>Quicktime>Streaming>Streaming speed: 1.5Mpbs T1/Intranet/LAN
Restart iChat
Steve

Intermittent REP501: Unable to Connect to Database Errors

Hi,
This problem is occuring on a Oracle Application Server 10g (9.0.4.2) configured to run Forms and Reports.
Operating system is Windows 2003 Server.
Reports are called from Forms using the RUN_REPORT_OBJECT.
Any user at any time running any report may receive a REP501: Unable to connect database error. Usually closing the Forms application and re-starting it clears the error.
Reports trace indicates the database has returned either an "invalid username/password" or "account locked" error. This cannot be true because our Forms app logs each individual user into their own database account. The Reports server logs in to the database as the user when it makes its connection.
This error clears itself without restarting the Reports server.
We have also seen information in the Reports trace that indicates a possible crash of the VisiBroker osagent.
The Windows event viewer does not show any errors or warnings.
Is it possible a crashed osagent could cause the Reports server to return the invalid username/pasword and account locked errors?
Any ideas on how to troubleshoot this further?
TIA,
Jim

Hi,
To know about the Action to be taken when REP-501 is encountered, you may want to refer to Oracle Reports Online Help available on OTN:
http://www.oracle.com/technology/products/reports/index.html

Community Publishing-"Unable to connect to the CPS server" Error

I am trying to connect to Community publishing.
I download the Community Publishing Air app, but when I put in my username/password,
I get this error "Unable to connect to the CPS server. Please make sure your firewall settings allow access to this url:
http://cps.corp.adobe.com/nioamfpoll".
I have updated Air, but got the same behavior.
I am running osx (10.6.6) on a 8 core Xeon.
Any suggestions?
Thanks
Clay

Hi Clay,
Do you have a firewall, or are you behind a corporate firewall that blocks certain ports on your machine?
What do you see when you visit this URL?
http://cps.corp.adobe.com
How about the following URL?
https://cps.adobe.com/nioamfpoll
Thanks,
Puny Sen

How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
Anybody has an idea of how to resolve this?
Thanks,
J

1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support

Outlook is unable to connect to the proxy server. (Error code 0)

Hello,
I have just commenced a Exchange 2007 SP3 to Exchange 2013 SP1 migration following the following guide: http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
As per the above guide, my 2007 environment is now known as legacy.company.com and my 2013, webmail.company.com.
I'm using the same certificate on both boxes and it has the names autodiscover.company.com, webmail.company.com and legacy.company.com. All that seems to be working fine.
OWA is functioning perfectly, hitting https://webmail.company.com will pass the user off to https://legacy.company.com if the mailbox is on 2007. Alongside this, Outlook also has no issues connecting to 2007 mailboxes with the client proxy settings
being reconfigured to https://legacy.company.com automatically.
My problem comes when a mailbox is migrated to 2013. OWA functions fine and presents the mailbox but Outlook is unable to connect, presenting the error:
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site webmail.company.com.
Outlook is unable to connect to the proxy server. (Error Code 0)
If I modify the Outlook client's settings and disable "Only connect to proxy servers that have this principal name in their certificate: msstd:webmail.company.com", Outlook connects and functions fine.
I'm at a loss and have tried everything I can think and find on google. Any suggestions would be greatly appreciated.

Hi,
Please refer to the following article :
http://support.microsoft.com/kb/923575
Cause:
This issue may occur if one or more of the following conditions are true:
The connection to the server requires a certification authority (CA).
You have not trusted the certification authority at the root.
The certificate may be invalid or revoked.
The certificate does not match the name of the site.
A third-party add-in is preventing access.
Solution:
To examine the certificate, follow these steps:
In Microsoft Internet Explorer, connect to the RPC server or to the secure server. For example, type
https://www.<var>server_name</var>.com/rpc in the Address bar of the Web browser, and then press ENTER.
Note The <var>server_name</var> placeholder references the RPC server name or the secure server name.
Double-click the padlock icon that is located in the lower-right corner of the Web browser.
Click the Details tab.
Note the information in the following fields:
Valid to
The Valid to field indicates the date until which the certificate is valid.
Subject
The data in the Subject field should match the site name.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

'unable to connect communication error'

Similar Messages

Maybe you are looking for