Unable to connect CP1525nw to Wifi router

Hello all,
I have a Netgear WNDR3700 with WPA2-PSK security and a CP1525nw printer. I am trying to get the printer to connect to the router via wifi. I have enabled wifi via the printer setup menu and then I have tried to connect via WPS - I pressed the WPS button on the router and selected the WPS function on the printer. Two minutes later, the printer would not connect. 
Any ideas on how to fix this? I cannot install any software on my PC or connect via USB as it is with limited account access. 

Does your Netgear have 802.11g enabled?  Try that.  I recommend a 802.11n/g mode.
If you use 802.11n only the printer only supports 2.4GHz range, so if you are using 5.0GHz it will not connect.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HT204400 Apple TV unable to connect to the WiFi Router solution.

    Having found my new Apple TV unable to connect to my WiFi Router I discovered a technique which may be useful to others. Use your mobile phone as a mobile hotspot instead. I hope this helps other people with a similar connectivity issue.

    Hi, i do have a similar situation. Everytime I try to synchronise itunes with my ATV (also version 2.3), it synchronise between 4 and 10 songs and then automatically disconnect the wireless connection on my computer (my ibook and other notebook stays connected at the same time). regards, Erik

  • Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

    Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.

    my ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.
    The ipad can find my wifi connection but just wont accept the password.  connected with no problem in the Apple store.
    any suggestions,
    thanks.

    Does the iPad connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • When I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password

    when I try and connect to my wifi, I get a response that says "unable to connect to my wifi" and it does not even ask for my password; thoughts?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS1398 I tried all solution but still i am unable to connect to my wifi. It started yesterday when my ipad cant connect to wifi.

    I tried all solution but still i am unable to connect to my wifi. It started yesterday when my ipad cant connect to wifi.

    It's hard to provide help when your question starts out with, "I tried all solutions" however here is some troubleshooting advice.
    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • HT204409 Suddenly my ipad seems unable to connect to our wifi. All other devices are working normally. Have I accidentally done something or is it a fault with my ipad ?

    Suddenly my ipad is unable to connect to our wifi. It buffers all the time?
    All other devices are working normally. Is this a fault wityh my ipad or have I inadvertantly altered some setting?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1398 Unable to connect to home wifi

    I'm unable to connect to home wifi with iphone.  My computer is able to connect as usual.

    Buried deep in that link is a suggestion to turn the router off and on again to reboot it. This should be the FIRST thing you try, not the last. It will usually resolve the problem.

  • IPhone 5s can connect to wireless WIFI router but can not access internet.

    iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
    TIA
    Rich

    You IT person should be able to sort this out.  But, they seems to be too busy or disinterested to do this.  Suggest you provide the it person with an iPhone to get interested.
    Any could be lots of things.
    The best you can do is to get access to the admin setup for networking on a pc?  The internet settings are all the same.  Only what names the manufactures change from OS to OS. Check and compare parameters.
    Phone works to internet at home, I assume?

  • TS1398 help!!!  i am unable to connect to a wifi network and ive tried everything but nothing seems to work!!! can someone help pls

    help!!!  i am unable to connect to a wifi network and ive tried everything but nothing seems to work!!! can someone help pls

    try connecting to another wifi network to isolate the issue. at this point it's impossible to tell if it's your phone or your network

  • Cant get my itouch to connect to my wifi router

    Ive been having trouble connecting to my wifi router, used the itunes support which suggested that i reset the network settings for my wifi,i did that until i saw the "note" below the instrustions on the itunes support page. the note said that all the passwords would be lost. So i tried to use my wifi after using this, typed in the password but it still did not work. I know its not an issue with the router because my brothers ipod touch can access the wifi through the same router and with the same password. What do i do?!?

    Try restarting your WiFi router by removing power to it for 30 seconds.
    If this does not work test your iPod on some other networks to see if it may have developed a hardware problem.

  • Unable to connect to secure Wifi, password input was correct

    I was unable to connect to secure Wifi, i ensured that i entered the correct password, i tried to reset my network setting and reconnect to secure Wifi but still unable to connect. However i can successfully connect to public wifi.

    Hi Charlesjoseph - I struggled for days and tried all the solutions mentioned in various forums before I realised that the password (the WEP key number) is case sensitive. Once I tried it all in capitals it connected no problem. Doh!!

  • Unable to connect Z10 to WIFI 2WIRE MODEM 2710HGV White color modem

    Hi, I bought Z10 on 30th March 2013 with great enthusiasm. That enthusiasm didn't last as I was unable to connect to the WIFI with the   WIFI 2WIRE MODEM 2710HGV. I took the help of my service provider but couldn't solve the problem.  Yesterday I went to the service provider STARHUB and they were able to connect to the internet via their server. Then I went to the BLACKBERRY expert center at the CATHAY, there also they were able to connect to their server. I have done the basic things like inputting the correct password etc. I even tried setting the home network ID on my z10 but that didn't help. Where can I go wrong?. It
    Please help to resolve this problem . Thanks.

    I have no idea how to send private message but here is the log.
    Wi-Fi Diagnostics Logs
    WI-FI INFORMATION
      > Status: Not Connected
      > Signal Level: -60 dBm
      > Failure Reason: Connection attempt timed out.
      > Profile Name: 2WIRE285
      > SSID: 2WIRE285
      > Channel: 6
      > AP MAC Address: 00:24:56:e2:7b:d9
      > Security Type: WEP
      > EAP Method:
      > Connection Data Rate: 0 Mbps
      > Network Type:
    DEVICE INFORMATION
      > Physical Address: 40:6f:2a:35:72:3f
      > Device OS: BlackBerry 10
      > Device Pin: 24DDFFF5
      > OS Version: 10.0.10.261
    INTERNET CONNECTION
      > IP Address:
      > Subnet Mask:
      > Default Gateway:
      > Primary DNS:
      > Secondary DNS:
      > Domain Suffix:
      > MTU:
      > Proxy Server:
      > Proxy Port:
    Supplicant Logs
      > 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 593 16:0c:c3:e6:e7:f8
      > 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 592 16:0c:c3:e4:04:40
      > 22:25:22: <3>CTRL-EVENT-BSS-REMOVED 582 70:54:d2:33:db:e5
      > 22:25:22: <3>CTRL-EVENT-BSS-ADDED 599 64:0f:28:56:19:52
      > 22:25:14: <3>CTRL-EVENT-BSS-REMOVED 579 16:0c:c3:eb:94:00
      > 22:25:14: <3>CTRL-EVENT-BSS-ADDED 598 90:f6:52:78:78:1c
      > 22:25:05: <3>CTRL-EVENT-BSS-ADDED 597 64:70:02:42:df:3a
      > 22:24:56: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
      > 22:24:56: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
      > 22:24:53: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
      > 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:53: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:53: <3>CTRL-EVENT-BSS-REMOVED 585 16:0c:c3:de:5c:28
      > 22:24:53: <3>CTRL-EVENT-BSS-ADDED 596 64:0f:28:4c:2d:d6
      > 22:24:53: <3>CTRL-EVENT-BSS-ADDED 595 64:0f:28:4b:f6:6e
      > 22:24:53: <3>CTRL-EVENT-BSS-ADDED 594 64:0f:28:57:4e:92
      > 22:24:49: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
      > 22:24:49: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
      > 22:24:47: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
      > 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:47: <4>   skip - blacklisted (count=1 limit=0)
      > 22:24:47: <3>CTRL-EVENT-BSS-REMOVED 578 00:26:50:7a:38:a9
      > 22:24:47: <3>CTRL-EVENT-BSS-ADDED 593 16:0c:c3:e6:e7:f8
      > 22:24:47: <3>CTRL-EVENT-BSS-ADDED 592 16:0c:c3:e4:04:40
      > 22:24:47: <3>CTRL-EVENT-BSS-ADDED 591 20:aa:4b:af:b4:02
      > 22:24:43: <3>CTRL-EVENT-DISCONNECTED bssid=00:24:56:e2:7b:d9 reason=0
      > 22:24:43: <3>WLAN_AUTH_FAIL:UNRESPONSIVE_AP: [id=4]
      > 22:24:40: <3>Trying to associate with 00:24:56:e2:7b:d9 (SSID='2WIRE285' freq=2437 MHz) [id=4]
      > 22:24:40: <3>CTRL-EVENT-BSS-REMOVED 571 00:16:b6:33:a1:fa
      > 22:24:40: <3>CTRL-EVENT-BSS-ADDED 590 c8:d7:19:69:eb:a7
      > 22:24:33: <3>CTRL-EVENT-BSS-ADDED 589 64:0f:28:57:00:82
      > 22:24:33: <3>CTRL-EVENT-BSS-ADDED 588 38:60:77:aa:60:64
      > 22:24:33: <3>CTRL-EVENT-BSS-ADDED 587 16:0c:c3:de:dc:60
      > 22:24:24: <3>CTRL-EVENT-BSS-ADDED 586 00:26:75:87:0d:9a
      > 22:24:24: <3>CTRL-EVENT-BSS-ADDED 585 16:0c:c3:de:5c:28
      > 22:24:24: <3>CTRL-EVENT-BSS-ADDED 584 16:0c:c3:de:e4:80

  • Can I wirelessly sync iphone ios 5 to a desktop thats connected to the wifi router?

    Can I wirelessly sync iphone ios 5 to a desktop thats connected to the wifi router?

    Meaning that the desktop does not have wif access, only an ethernet connection to the router that the iphone connects to

  • I am unable to connect to my WIFI.It keeps asking for a password and when i enter the password it says that is unable to connect or i have entered an incorrect password

    I am not able to connect to my Wifi. It keeps asking for a password and when i enter the password it either says Unable To Connect or Incorrect Password.
    This occurred only after installing a new Wifi router from Qtel (service provider). any assisyance is greatly appreciated.

    You should call Qtel technical support and ask for help.
    Where did you get the password that you are trying? What does it look like? (Length, type of characters)
    Do you know what type of security is being used? WEP, WPA, WPA2

Maybe you are looking for

  • Online poll in dreamweaver cs3

    I'm new to dreamweaver and website development, can ayone help? I've set up a html form with radio objects and a submit button as a simple web poll. Yet i'm not sure how this works. Do I have to set up something to proccess the information. I am hook

  • Memory errors in alert log

    Working on following environment: Platform -> Windows Server 2003 Version V5.2 Service Pack 2 32-bit Oracle Database -> 10.2.0.1 My database was going to shutdown(auto) after 5 minutes of database startup. When I investigate alert log got following m

  • XServe without a rack

    Hello Mac Community, Is is it safe to run an XServe on a flat and stable surface? Does it need to be installed in a rack? We have a single intel quad core unit, and are waiting for an appropriate time to get a rack installed in the office. However, u

  • Filter for an 2D array of data, to obtained and defined range of data

    I am generating data from a ultrasonic sensor at 1K Hz, and its a lot of data (data points range from 0-10). However, in some cases when I know data should be around 7 (for example) I get outliers (about 9 and around 10). Is there a way to set a filt

  • Invoice Reversal in Closed Period

    Hello everyone,                          Can an invoice, whose posting period is closed be reversed?Also, in the transaction MR8M( for invoice reversal) under the "reason for reversal" field, what is the difference between "invoice reversal" and "act