Unable to connect destination in PPTP vpn even inspect is enable, we are seeing redirection of different IP and ports in logs

Kindly go through the attached logs and help me with that

Keep in mind there are several flavors of IPSec. Standard, IPSec ofver UDP, and IPSec of TCP. You will see these option in the Cisco VPN client. Many lower end devices do not support IPSec over TCP, only standard IPSec. Standard IPSec and IPSec over UDP will not work properly if all three employees are being NAT/PAT'd to a single public IP address. They require a 1 for 1 translation. IPSec over TCP on the other hand does not require a 1 for 1 and has no issues with multiple users being NAT'ed to the same public IP. So if this is the case, your best bet would be to get a cheap VPN router that established a single IPsec tunnel at the hardware level and routes all of the users over that single IPSec tunnel using just a single public IP.
Hope this helps

Similar Messages

X1 Carbon 2014 - Unable to connect to Juniper (Junos) VPN

Hi,
today I finally received my new X1 Carbon.
I have almost set it up, but have stumbled upon a rather peculiar issue: I am unable to connect to a Junos VPN-server. I am using the built-in Junos VPN-plugin from Windows 8.1 (accessible from the Modern UI Network settings by adding a VPN there). When trying to connect I immediately receive an error message referring to ID "0x800700A1" - path not found. That message is given even before being asked for username or password. The VPN-plugin outputs no events at all to Windows event log (even though it should add such information even when it does not find the server or there is a username mismatch).
Since I am successfully using the exact same configuration on both an MS Surface (non pro) and a Windows 8.1 Desktop computer, I am 100% certain there must be some strange network-meddling on the Lenovo system (e.g. by one of Lenovo's apps). Specifically I fear there is some system file missing or replaced.
I am able to connect using Junipers proprietary software (the "Junos Client"), however that program causes occassional problems on my other computers and is thus not my favorite solution (especially since the built-in VPN can be set to auto-activate whenever a certain IP is called upon and change Proxies on the fly, neither of which is possible with Junipers tool).
Any ideas what might cause this (or what Lenovo app I should uninstall)?
Thanks for any help in advance,
Michael

Check out this thread (http://discussions.apple.com/click.jspa?searchID=5294598&messageID=6406585). The solution is there.

'Unable to connect' the number of free accounts can be enabled on this case has been reached

hello ! please someone help me
when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please

hello ! please someone help me
when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please
iPhone 5s, iOS 7.1.1

Help needed to connect to remote PPTP VPN via PIX 515e

Hello,
A user in our office needs to connect to a client's remote PPTP VPN but can't connect. The user is running Windows 7. We have a Cisco PIX 515e firewall that is running PIX Version 6.3(3) - this is what our user is having to go through to try and make the connection to the client's remote VPN.
The client's network guys have come back and said the issue is at our side. They say that they can see some of our traffic but not all of it. The standard error is shown below, and they say it's symptomatic of the client-side firewall not allowing PPTP traffic:
"A connection between the VPN server and the VPN client XXX.XXX.XXX.XXX has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets."
I have very little firewall experience and absolutely no Cisco experience I'm afraid. From looking at the PIX config I can see the following line:
fixup protocol pptp 1723.
Does this mean that the PPTP protcol is enabled on our firewall? Is this for both incoming and outgoing traffic?
I can see no reference to GRE 47 in the PIX config. Can anyone advise me what I should look for to see if this has been enabled or not?
I apologise again for my lack of knowledge. Any help or advice would be very gratefully received.
Ros

Hi Eugene,
Thank you for taking the time to reply to me. Please see our full PIX config below. I've XX'd out names and IP addresses as I'm never comfortable posting those type of details in a public forum. I hope that the information below is still sufficient for you.
Thanks again for your help,
Ros
PIX(config)# en
Not enough arguments.
Usage: enable password [] [level ] [encrypted]
no enable password level
show enable
PIX(config)# show config
: Saved
: Written by enable_15 at 10:30:31.976 GMT/BDT Mon Apr 4 2011
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 DMZ security10
enable password XXX encrypted
passwd XXX encrypted
hostname PIX
domain-name XXX.com
clock timezone GMT/BST 0
clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol pptp 1723
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name XX.XX.XX.XX Secondary
access-list outside_access_in permit tcp XX.XX.XX.XX 255.255.255.240 host XX.XX.XX.XX eq smtp
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq https
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq 993
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq 587
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq 82
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq www
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq www
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq www
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq https
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 993
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 587
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 82
access-list outside_access_in permit tcp host XX.XX.XX.XX host XX.XX.XX.XX eq 82
access-list outside_access_in permit tcp host XX.XX.XX.XX host XX.XX.XX.XX eq 82
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq smtp
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 8082
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq www
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq https
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 993
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 587
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq 82
access-list outside_access_in permit tcp any host XX.XX.XX.XX eq smtp
access-list outside_access_in permit tcp any host XX.XX.XX.XX. eq www
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.0.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl deny udp any any eq 135
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_40 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_60 permit ip any XX.XX.XX.XX 255.255.255.0
access-list USER1 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_10 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_20 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_30 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_50 permit ip any XX.XX.XX.XX 255.255.255.0
access-list outside_cryptomap_70 permit ip any XX.XX.XX.XX 255.255.0.0
access-list USER2 permit ip any XX.XX.XX.XX 255.255.255.0
access-list USER3 permit ip any XX.XX.XX.XX 255.255.255.0
access-list USER4 permit ip any XX.XX.XX.XX 255.255.0.0
pager lines 24
logging on
logging host inside XX.XX.XX.XX
icmp permit any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
ip address outside XX.XX.XX.XX 255.255.255.248
ip address inside XX.XX.XX.XX 255.255.255.0
no ip address DMZ
ip audit info action alarm
ip audit attack action alarm
pdm location XX.XX.XX.XX 255.255.255.255 inside
pdm location XX.XX.XX.XX 255.255.0.0 outside
pdm location XX.XX.XX.XX 255.255.255.0 outside
pdm logging debugging 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) XX.XX.XX.XX XX.XX.XX.XX netmask 255.255.255.255 0 0
static (inside,outside) XX.XX.XX.XX. XX.XX.XX.XX netmask 255.255.255.255 0 0
static (inside,outside) XX.XX.XX.XX. XX.XX.XX.XX netmask 255.255.255.255 0 0
static (inside,outside) XX.XX.XX.XX XX.XX.XX.XX netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 XX.XX.XX.XX 1
route inside XX.XX.XX.XX 255.255.0.0 XX.XX.XX.XX 1
timeout xlate 3:00:00
timeout conn 2:00:00 half-closed 0:30:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
ntp authenticate
ntp server XX.XX.XX.XX source outside prefer
http server enable
http XX.XX.XX.XX 255.255.0.0 outside
http XX.XX.XX.XX 255.255.255.0 outside
http XX.XX.XX.XX 255.255.255.255 inside
snmp-server host inside XX.XX.XX.XX
no snmp-server location
no snmp-server contact
snmp-server community XXX
snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map cola 20 set transform-set ESP-3DES-MD5
crypto dynamic-map dod 10 set transform-set ESP-3DES-MD5
crypto map outside_map 10 ipsec-isakmp dynamic cola
crypto map outside_map 20 ipsec-isakmp
crypto map outside_map 20 match address outside_cryptomap_20
crypto map outside_map 20 set peer XX.XX.XX.XX
crypto map outside_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 25 ipsec-isakmp
crypto map outside_map 25 match address USER1
crypto map outside_map 25 set peer XX.XX.XX.XX
crypto map outside_map 25 set transform-set ESP-3DES-MD5
crypto map outside_map 30 ipsec-isakmp
crypto map outside_map 30 match address outside_cryptomap_30
crypto map outside_map 30 set peer XX.XX.XX.XX
crypto map outside_map 30 set transform-set ESP-3DES-MD5
crypto map outside_map 40 ipsec-isakmp
crypto map outside_map 40 match address outside_cryptomap_40
crypto map outside_map 40 set peer XX.XX.XX.XX
crypto map outside_map 40 set transform-set ESP-3DES-MD5
crypto map outside_map 50 ipsec-isakmp
crypto map outside_map 50 match address outside_cryptomap_50
crypto map outside_map 50 set peer XX.XX.XX.XX
crypto map outside_map 50 set transform-set ESP-3DES-MD5
crypto map outside_map 60 ipsec-isakmp
crypto map outside_map 60 match address outside_cryptomap_60
crypto map outside_map 60 set peer XX.XX.XX.XX
crypto map outside_map 60 set transform-set ESP-3DES-MD5
crypto map outside_map 70 ipsec-isakmp
crypto map outside_map 70 match address outside_cryptomap_70
crypto map outside_map 70 set peer XX.XX.XX.XX
crypto map outside_map 70 set transform-set ESP-3DES-MD5
crypto map outside_map 75 ipsec-isakmp
crypto map outside_map 75 match address USER4
crypto map outside_map 75 set peer XX.XX.XX.XX
crypto map outside_map 75 set transform-set ESP-3DES-MD5
crypto map outside_map 80 ipsec-isakmp
crypto map outside_map 80 match address USER2
crypto map outside_map 80 set peer XX.XX.XX.XX
crypto map outside_map 80 set transform-set ESP-3DES-MD5
crypto map outside_map 90 ipsec-isakmp
crypto map outside_map 90 match address USER3
crypto map outside_map 90 set peer XX.XX.XX.XX
crypto map outside_map 90 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp key ******** address XX.XX.XX.XX netmask 255.255.255.255 no-xauth no-config-mode
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
telnet XX.XX.XX.XX 255.255.0.0 outside
telnet XX.XX.XX.XX 255.255.255.255 inside
telnet XX.XX.XX.XX 255.255.255.255 inside
telnet XX.XX.XX.XX 255.255.255.255 inside
telnet timeout 30
ssh XX.XX.XX.XX 255.255.255.248 outside
ssh XX.XX.XX.XX 255.255.255.248 outside
ssh timeout 30
management-access inside
console timeout 0
terminal width 80
Cryptochecksum:XXX
PIX(config)#

ORA-12203 TNS unable to connect destination

HI,
bold section my database name and my computer name
this is my devloper tnsname.orafile D:\ORANT\NET80\ADMIN\TNSNAMES.ora
Beq-local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = BEQ)
(PROGRAM = oracle80)
(ARGV0 = oracle80ORCL)
(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')
(CONNECT_DATA = (SID = ORCL)
Tcp-loopback.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = 127.0.0.1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
TcpExample.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = Production1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
iqra.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = fahim)
(Port = 1521)
(CONNECT_DATA = (SID = IQRA)
)SpxExample.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = SPX)
(Service = Server_lsnr)
(CONNECT_DATA = (SID = ORCL)
NmpExample.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = NMP)
(Server = FinanceServer1)
(Pipe = ORAPIPE)
(CONNECT_DATA = (SID = ORCL)
CMExample.world =
(DESCRIPTION=(address_list=
(ADDRESS=
(PROTOCOL=tcp)(PORT=1610)(HOST=CM_SERVER))
(ADDRESS=
(PROTOCOL=tcp)(PORT=1521)(HOST=LSNR_SERVER)))
(CONNECT_DATA=(SID=ORCL))
(SOURCE_ROUTE=yes)
extproc_connection_data.world =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = EXTPROC%ORACLE_HOME_ID%)
(CONNECT_DATA = (SID = extproc)
this is my oracle tnsname.orafile D:\ORACLE\network\ADMIN\TNSNAMES.ora
# TNSNAMES.ORA Network Configuration File: D:\ORACLE\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
IQRA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = IQRA)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = IQRA)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
but my form and report not connect with oracle database
please give me help
how connect oracel with report by useing configuration assistant can you give me idea
thanking you

The database and the Oracle software are on the same computer, so I don't have to use remote connection. I've checked the listener and the database name is on the list (protocol: IPC, name: ORCL). On the other hand the name of the database is the default name (ORCL), and when I first create the database (with the Database Assistant tool) I've checked the option "Add to the listner". I think that is enough to be sure that the db name is on the list. But still I have the error. Moreover, when i start the service Oracle Tnslistener80 (is this the service, right?) it starts correctly, but after one minute it automatically stop.
Thank you for the reply
Tiziano

Since updating to iOS 6 on my ipad i am unable to connect to the internet, itunes or the app store. I have tried many suggestions about changing the dat, logging in/out of itunes etc but nothing has worked! Please help :)

Since updating my ipad to iOS 6 a few days ago i can't seem to get onto the internet, the app store or itunes, nor can i update to iOS7!! I sent an email to apple support and they said we don't handle these issues and redirected me back to the help forums which i have already seen and tried everything other people have suggested and nothing has worked (changing date, signing in/out of itunes etc). When i go to app store the screen is blank, in itunes it just keeps saying loading but never gets anywhere and same with the internet! When i go to settings to update to iOS 7.0.4 it says software update unavailable, try again later. Not sure what to do now. Nothing works, can't use my apps, facebook, music etc. Will contact apple again and try get some answers. But thanks for any info

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am getting an unable to connect error messagen when I start the browser. The setting is set to "no proxy" and my internet connection is working fine. What can I do to fix this?

I opened up my firefox browser yesterday and it crashed. Since then I get an error message that says "unable to connect" every time I try to load the browser. The setting is set to "no proxy" So it should be connecting. My internet explorer browser is working fine. So I know it is not my internet connection. What can I do to make the firefox browser work again?

Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90

IPad unable to connect to internet since last update although wifi enabled? iPad 1 ?

Since the last update my iPad 1 has been unable to connect to Safari although my wifi at home is enabled? Have tried to reset network settings and rejoin my network but still no luck? Any ideas?

Since the last update my iPad 1 has been unable to connect to Safari although my wifi at home is enabled? Have tried to reset network settings and rejoin my network but still no luck? Any ideas?

TS1424 When trying to purchase and subsequently play programs on Apple TV keep getting message: "Apple TV unable to connect to server at this time. Please try again later." Able to play previews and trailers on Apple TV and able to play programs on Netfli

Last night I was watching programs on Apple TV with only one problem: I was not able to purchase the entire season of "Homeland" but could purchase and watch individual episodes. Today I am able to watch only previews and trailers from iTunes. After attempting to purchase a program I keep getting the message: "Apple TV is. Unable to connect to the server at this time. Please try again later." I am able to watch programs on Hulu, Netflix, etc. without problems.
Any suggestions?

I have a similar problem. After a recent update I cannot access the iTunes Store to resubscribe to Hulu. "Cannot access iTunes Store at this time." Dunno what to do.

I am unable to connect to wifi that has a password - this includes my home, my work (2 work places) and my brother's home - and I do have the correct passwords

I just got the iPhone 5s - I am unable to access wifi that has a password including home, office, family's homes - any ideas?

Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
At step 6 after you say forget network. Turn off the WiFi and then turn it back on. It should now come up with the network name you want to connect to. It will appear in the list of available WiFi networks.
Click the name of the network and enter the password if it asks for it. That should get you on the wifi.
Good Luck

HT201413 ? I have an iPad 3 and it just keeps power cycling. I have tried to restore it with iTunes several times and it keeps coming up with Error 9. Loss of USB connection. I have tried different cables and ports and it wont come back to life.

Can't seem to figure this out on my own. My apple store is 90 minites away and I would like to not burn up a weekend traveling to the store just to have it sent away. Any ideas what I can do to get my iPad3 from power cycling. I am up to date on all software updates.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

HT4061 'iPhone is disabled connect to itunes' pls assist how i can enable my iphone as the slide is locked and I cant enter the password

the slide on my phone doesnt work, can someone advise what I need to do to enable my iphone as I cant use it at the moment/.

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT1212

I'm unable to print or save pdf documents without losing text. Margins are not maintained page to page and text size might not be maintained either.

Printing within Firefox is untenable. I lose text at page break or a right margin. This happens when printing or saving as "pdf" file. Everything works fine in Safari.

Dear user,
You are getting such output because you have checked ON the setting 'Print to file' in one of your previous prints. For resolving this issue, kindly uncheck option 'Print to file' present in bottom left corner of print dialog and then click on 'Print' (See attached image for reference).
Hope this will solve your problem.
Thanks
sonal

Alot of wi-fi hotspots don't support PPTP VPNs

Anyone else using a PPTP based VPN having trouble connecting to open wi-fi hotspots like at airports? On my last trip both airports had free wi-fi hotspots but the iphone/touch was unable to connect using my PPTP VPN service. Do some open hotspots block PPTP access? If so, why?
thx
lenn

*"Do some open hotspots block PPTP access?"*
Possibly
*"If so, why?"*
The only people that would know that are the network admins of those hotspots.

Can't connect to PPTP-VPN server...

When attempting to connect to a DD-WRT PPTP VPN server I kept receiving the general "Can't connect to PPTP-VPN server." message. All of the settings were exactly correct and tested on a Windows laptop. I began writing this because I didn't have any other ideas but half way through it (out of the blue) decided to attempt connecting. It worked!
The only thing I did different was delete the /Library/Preferences/SystemConfiguration contents and reboot.
Let's hope it continues to work. Posting this in case anyone else has the same error as I.

A follow up on the VPN issue: it would only work if my laptop's wireless was tethered off of my Android phone - any other connection would connect to the VPN and get an IP but I couldn't ping anything. Also, after rebooting, I get the exact same damning error message now and any combination of rebooting and removing/renaming (don't ever delete system files!) /Library/Preferences/SystemConfiguration/* hasn't fixed the issue.
I very much hope Apple releases an update soon for this - it's a serious inconvenience! It must be a network stack issue too because I've tried many 3rd party applications that barf as well.

Unable to connect destination in PPTP vpn even inspect is enable, we are seeing redirection of different IP and ports in logs

Similar Messages

Maybe you are looking for