Unable to connect EA4500 with HP 1525NW wireless printer

I recently switched from an old linksys router to a new EA4500. Before I had no trouble connecting my wireless HP printer using the WPS setup. However with the new EA4500, I tried multiple times without success.
Here is a solution I found online. It works. I had to use the original installation disks that came with the printer to reinstall the software and manually - using a USB - connected my printer to my wireless network.
Method three: Standard connection using a USB cable
If your wireless router does not support WiFi-Protected Setup (WPS), you can use this method to set up the product on a wireless network. Using a USB cable to transfer settings makes setting up a wireless connection easier. After the setup is complete, disconnect the USB cable.
Insert the software CD into the CD drive.
Follow the on-screen instructions. When prompted, select the Connect through a wireless network option.
Connect the USB cable ( ) to the product and the computer when prompted.
CAUTION:
Do not connect the USB cable until the installation program prompts you.
When the installation is complete, print a Configuration Report to make sure that the product has an SSID name. Follow these steps to print a configuration report:
Load plain white paper into tray 1.
On the product control panel, press OK , and then press OK again to select Reports .
Press the Right Arrow button ( ) to scroll to and select Config Report .
When the Configuration Report prints, disconnect the USB cable ( ) from the product.
You have completed the software installation. Do not perform any more steps in this document.

Well it's never recommended to do WPS setup for printer. Following the manual instructions like you posted is the best.

Similar Messages

Unable to connect C4780 with Mac Pro wirelessly

When i tried to conner Printer C4780 wirelessly to Mac pro it says that the selected printer software isn't from the manufacturer and may not let you use all the features of your printer. The software that i installed is one which i received when in brought printer in PC World in UK. It does connect with USB but not wireless.

Hi @Krish1840 , and thanks for the reply!
Do the pages come out blank when making a copy as well?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer via OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to connect JAVA with Oracle

I have jdk1.6 and oracle installed on my machine but unable to connect java with database
have classes12.jar and ojdbc14.jar
my environmental variables in respect to this are :
JAVA_HOME= C:\Java\jdk1.6.0_04
JRE_HOME=C:\Java\jdk1.6.0_04
PATH=J:\oracle\ora92\lib;
J:\oracle\ora92\bin;
C:\Program Files\Oracle\jre\1.3.1\bin;
C:\Program Files\Oracle\jre\1.1.8\bin
CLASSPATH=J:\oracle\ora92\jdk\jre\bin\JdbcOdbc.dll;
J:\oracle\ora92\jdbc\lib\classes12.jar;
J:\oracle\ora92\jdbc\lib\ojdbc14.jar
The code is
import java.sql.*; public class dat1 { public static void main(String[] args)throws SQLException,ClassNotFoundException { try { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); Class.forName("com.oracle.jdbc.OracleDriver"); } catch (ClassNotFoundException e) { System.out.println("unable to load driver"); return; } } }
the error message is
Error in thread "main" java.lang.NoClassDefFoundError
Please Help Me
Thanks For Reading
Thanks a lot in Advance For your ANSWERS

maybe if you asked nicely instead of ordering people around we might tell you.
As it is all you're going to hear is that you don't need both those jars, as they contain different versions of the same driver.
I'm not going to tell you which you need, as you should have the documentation to tell you that. But then you also should have the documentation to tell you how to set your classpath properly and you failed to read that too.

Unable to connect hana with sybase replication server and i am not getting ECH plz help

unable to connect hana with sybase replication server and i am not getting ECH plz help

Please don't necrobump/hijack threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
https://wiki.archlinux.org/index.php/Fo … _hijacking
Closing

I am Unable to connect iphone with Wi Fi and iTunes

I am Unable to connect iphone with Wi Fi and iTunes is ther any alternative for the same.

Dr.sudin wrote:
I wish to restore the earlier version of the iOS
You cannot.
If you are having issues with yoru SIM, contact your data carrier or the Apple store.

I need step by step way of connecting my iPad to my wireless printer?

I need help connecting my iPad to my wireless printer?

Add to Templeton's post: Never hurts to power down the iPad, count to 10, then turn it on again. When my iPad loses touch with our printer, we power cycle the iPad, and that normally fixes the issue. Also review the link in Templeton's post.

HT3500 How do I connect my iPad to my wireless printer?

How do I connect my iPad to my wireless printer?

Your iPad should be able to print directly to your printer if it is an AirPrint compatible model.
Check this Apple support document to see if your printer is compatible.
http://support.apple.com/kb/HT4356
Post back on your findings.

Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Unable to connect internet from macbooks only (wireless) - macbooks with cable are ok, PCs connect ok wireless, backup also ok to macbooks, time capsule

Wireless internet connection is down from macbooks only. When try to connect wirelessly, macbook ask for PPPoE use name and password which I type and nothing happens ... macbook keeps asking for both but cannot connect/
I am unable to connect wireless with macbooks only but it's ok with an ethernet cable from macbook to timecapsule. Macbooks also access time capsule for backups wireless without a problem.
Also it's ok to connect to the internet wirelessly with windows based notebooks.
Hardware: 2T Timecapsule, Macbook 15, MacbookAir 11, 2 Sony Vaios. Both macbooks are running OSx 10.6.8 - All lastest firmware is installed.
I have turn off and on timpecapsule and modem. And downloaded lastes firmaware. Network has been working ok for at leat 30 days since I boiugth time capsule
Any suggestions?
Thanks in advance.
Andy

Welcome to the discussion area!
Just a hunch. The Sony and iBook may not be able to handle WPA2 Personal Security, which is the default Security setting of the Time Capsule.
Open AirPort Utility, click Manual Setup
Click the Wireless tab below the row of icons
Change the setting for Wireless Security to WPA/WPA2 Personal
Update to save settings
Any luck?

"Unable to connect to hidden network" - Losing wireless connection on 1 PC in network - EA4500

We have a two-month old EA4500 router. Over the last couple of days one of our wireless pc's (running Windows 7) has occasionally been losing connection to our wireless network. Troubleshooting indicates that it is "unable to connect to the hidden network (our network name)" Our network should not be hidden, and our 2 other wireless devices are not experiencing this issue. When the disconnect occurs, the only way we are able to reconnect the PC is to disable and reenable the wireless adapter through device manager, or pull the adapter out of the USB and re-insert it. (The USB wireless adapter is also new - only a month old and is also a Linksys ). Does anyone have an idea what could be causing this issue, and what we can try to fix it? It's getting very annoying. Thanks!

There are times that these USB adapters (especially those Wireless Network Adapters) requires more power and they can't draw enough power once plugged in to a USB hub or USB extension cables. Can you try to plug it in directly to a USB port at the back of your computer? So that the adapter would draw enough power from the motherboard.
If everyone needs to believe in something, I believe I'll have another beer..

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

HT204409 unable to connect my ipad to my wireless internet - all other devices including another ipad, ipods, laptops etc.. connect fine?

Can't seem to connect one of my ipads to our wireless network at home - every other device in the house is connected?
any suggestions?

Did it ever connect? How about to other networks?
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
When unable to connect to 802.11n WiFi Networks
http://support.apple.com/kb/TS3727?viewlocale=en_US&locale=en_US
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

Unable to connect forms6i with oracle 10g

hi:
i am facing a problem to connect forms6i with oracle 10.2 g. i already make a entry in TNSNAMES.ora file in forms folder.
while i am trying to connect it dispaly "ORA-12203: TNS:unable to conect to destination" error.
please help. Thanks in advance.
Regards,
Abhishek

Hi
i already make a entry in TNSNAMES.ora Another option...
1. Pls Verify that the net service name you entered was correct including no spaces.
2.Verify that the ADDRESS portion of the connect descriptor which corresponds to the net service name is correct.
3.Ensure that the destination process (for example the listener) is running at the remote node and the cabel of ur local net work connecting to ur server is well connected and working well.
4. Test ur local network cabel and try to make the connection to another computer set.
5.u can check from Start > control panel > administrative tools > services that the service name is started or not if it is Started Restarted or refresh it.
6. Ensure that the listener is running at the remote node and that the ADDRESS parameters specified in TNSNAMES.ORA are correct.
and the more ....
Hope this helps...
Regards,
Abdetu...

Unable to connect macs with afp file sharing

I am suddenly unable to connect my MacBook Pro to my Mini using afp file sharing. I've done this successfully many times in the past, most recently about three weeks ago.
After using Go -> Connect to Server and picking the previously used Favourite Server entry, I get the Connecting to Server window, then after about a minute I get a pop up that says:
Connection failed
The server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again.
Then the Finder icon jumps about and in the Connecting to Server window the message is:
The Finder cannot complete the operation because some data in "afp://aragorn" could not be read or written. (Error code -36)
Both machines are connected by Cat-6 cable to the same router, File Sharing is enabled on both machines, and Airport is switched off. I can ping each machine from the other, and both otherwise work fine. I've also tried connecting using the IP address instead of the machine name, with the same result. I've even tried another router, with the same result.
Anyone seen this before?
thanks in advance,
I.B.

Thanks, j.v., for your reply. It's very strange, this.
I tried your suggestion, but to no avail. The destination machine is visible using ⇧⌘K and under 'Shared' in the sidebar of the Finder window, but selecting it from either place didn't work.
However, after the connection attempts failed, I tried clicking on the 'Connect as' button in the Finder window, and after a bit I got the login credentials window. It allowed me to log in, then connected with the access I was after.
I guess it must be some sort of access permissions issue, but it's quite odd that it only just started happening as I move files between these two machines frequently, and never had any problems before. The 'error code 36' message is completely useless for troubleshooting...

Unable to connect phone with pc-help

iam unable to connect my pc with the blue tooth

More information needed??
What information....read this first:
/discussions/board/message?board.id=pcsuite&message.id=160

Unable to connect EA4500 with HP 1525NW wireless printer

Similar Messages

Maybe you are looking for