"Unable To Connect" iPhones on iOS 6.1.2

Hi,
I have a Cisco AP1142N on software version 12.4(21a)JA1. I am able to get my iPhone 5 on iOS 6.1.2 and my iPad on iOS 6.1.1 connected along with a host of other Blackberry and Android devices, however I am unable to get any iPhone 4,4S or 3GS connected even if on the latest iOS version.
I keep getting the "Unable to Connect" error on the device.
Is the software version above the latest version? I only have a web interface access to the AP as it is in another part of the building.I currently have TKIP enabled with WPA/WPA2 enabled.
I would appreciate any help or even be pointed in the right direction, most solutions are command based which are a bit difficult for me to try.
Many thanks in advance.
EC

Right,
I have now created a new SSID (e.g. GUEST2) for which I have set to use WPA, under express security I can see broadcast enabled for both SSID's, however this second ID cannot be seen by any of my devices. I have ticked the "Multiple BSSID Beacon" as Set SSID as Guest Mode.
Nothing happens when I try to click the radio button "Multiple BSSID" for the two Radio's.
Many thanks
EC

Similar Messages

  • I am Unable to connect iphone with Wi Fi and iTunes

    I am Unable to connect iphone with Wi Fi and iTunes is ther any alternative for the same.    

    Dr.sudin wrote:
    I wish to restore the earlier version of the iOS
    You cannot.
    If you are having issues with yoru SIM, contact your data carrier or the Apple store.

  • TS1363 since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    Hey there Jantje1,
    It sounds like you are unable to launch iTunes and get an error message instead. I would try the troubleshooting outlined in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If it comes down to uninstalling, then re installing iTunes altogether, use this link to download the 64 bit version of iTunes directly.
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I am unable to connect iphone 5 to itunes.

    I am unable to connect iphone to itunes.
    Message that pop-up. "i need to download 10.7 or later". I can not download 10.7 because it says that my computer is not compatible. I downloaded itunes 10.6 but it does not work.
    Mac version 10.6.8

    iPhone requirements: from http://store.apple.com/us/browse/home/shop_iphone/family/iphone/iphone5#tech-spe cs
    System Requirements
    Apple ID (required for some features)
    Internet access5
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/itunes/download)
    iTunes requirements: from http://www.apple.com/itunes/download/
    Macintosh System Requirements
    Mac computer with an Intel Core processor and 512MB of RAM
    OS X version 10.6.8 or later
    Safari 4.0.3 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    MJ

  • I can't connect iPhone 4 (iOS 5) to iTunes 12. I receive an error message that says "An unknown error occurred (0xE8000003)."

    I can't connect iPhone 4 (iOS 5) to iTunes 12. I receive an error message that says "An unknown error occurred (0xE8000003)."

    Hi habeebhs,
    Thank you for using Apple Support Communities.
    To troubleshoot getting the error code "0xE8000003" when you connect your iPhone to iTunes on your Windows PC, please follow the steps in the support article linked to below.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
    Cheers,
    Alex H.

  • Unable to connect iphone to laptop

    After updating to itunes 11.1, my iphone 5 has been unable to connect to my laptop through the USB cable. When I plug it in, a sound plays as if connected, but nothing shows up in either itunes or my computer. Before updating to itunes 11.1, my iphone was able to connect to my laptop. Only after updating and restarting the computer as recommended, did my iphone stop being able to connect.
    My laptop runs on windows 8 and iphone runs on iOS 7.
    I have tried restarting my laptop and iphone but to no avail. I am able to connect my iphone to another laptop, also running on itunes 11.1. I have tried 2 different cables to connect to my laptop and neither worked.
    Help please!
    Thanks

    Solved!
    I had to follow the following help page:
    http://support.apple.com/kb/TS1538
    Unplug your iphone, take a screenshot, then replug it back in. Tada! Solved.

  • TS1538 unable to connect iPhone to iTunes (11.0.1.12)

    I have updated iTunes to 11.0.1.12 and I'm now unable to connect any devices to the PC. The following message is displayed: "this iphone cannot be used because the required software is not installed. Run the itunes installer to remove iTunes, then install the 64-bit version of itunes." After following the diagnostics and online help if seems others are having similar problems. After uninstalling and installing the IOS checking the USB drivers and Apple mobile devices settings are correct and have been switched on/off - the same message appears and Iphones still not available in itunes, but shows in windows.
    Anyone any ideas??????

    Thanks for your help Jim
    I found some info in other threads and read that some people had re-downloaded, re-installed and were now working OK. Unfortunately some others went through that pain and still had the issue.
    I found a reference to deleting the file 'iTunes Library.itl' and copying back the previous version of that file.
    I tried this and when I fired up iTunes I noticed there was a window pop up saying iTunes was updating the database to version 11. I then re-imported the CD and now the songs are there in iTunes, the artwork is there and song titles etc. The songs play and everything appears normal again.
    It would appear that my issue was the database was not correctly upgraded correctly durting the original upgrade, this theory is to some extent supported by the fact some people have had success re-installing version 11. This also suggests the upgrade process may be a little flaky.
    Anyway thank you to the person suggesting downgrading the 'iTunes Library.itl' file, sorry I did not take a note of your name.

  • Unable to connect wifi on ios 6

    I m unable to connect my wifi after upgrade to iOS6 ...its take me to apple.com.. I try every thing.. Trun off n turn it on.. Reset settings.. Clear cookies ... But it didn't work.. Help....

    have you tried all the help in this apple support document?
    http://www.apple.com/support/iphone/wifi/

  • Unable to connect to network ios 7

    Tried Reset Network Settings with airpalne mode on and with it off. Reset router. Updated router to latest firmware. Still unable to connect to network.

    Hi there casefromab,
    it sounds like you have already tried a few things, but you may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Unable to connect Iphone 5 to Time Capsule Wifi

    I have an intermittent problem where my Iphone 5 is unable to connect to my Home Wifi via Time Capsule.
    Once I was watching youtube then suddenly realised I am on 3g and not connected to my Home Wifi.
    I already configured my Time Capsule's AirPort Utility to the following setting:
    Radio Mode: 802.11a/n - 802.11b/g/n (Automatic)
    2.4GHz Channel: 3
    5 GHz Channel: Automatic

    I am able to scan the other networks from my neighbors which are secured so I am not sure what channels they are in. I am also able to see my network once in a while.
    I had this problem with my Iphone 3gs before and the solution was to set my Time Capsule's 2.4GHz Channel to 3 (which also came from this forum)

  • Unable to update iPhone 4, iOS 4.2.1, iTunes 10.1 (54), Mac OS 10.6.5

    iTunes notifies me that iOS 4.2 update is available for my iPhone 4.
    I'm on my MacBook Pro, with iPhone 4, iOS 4.1 (8B117), iTunes 10.1 (54), Mac OS 10.6.5.
    I select either 'download' or 'download and update' and get the following error message:
    *There was a problem downloading the software for the iPhone "_ iPhone". You do not have enough access privileges for this operation.*
    I have run *repair permissions*, rebooted the computer multiple times. I have 22Mbit Internet with a 120GB download limit with 90GB remaining.
    Does anyone know what causes this arcane error? Surely the error indicates that there is a directory, most likely in ~/Library or /Library that has incorrect permissions, obviously +repair permissions+ hasn't fixed it. Does anyone know where iTunes stores its downloaded updates?

    I fired up my G5 MacPro and was able to update the phone, I was also then able to determine the download location for iTunes iPhone updates which is
    ~/Library/iTunes
    When I saw that I also noted that the permissions on that directory was Read/Write for System only, I added Read/Write permissions for Staff and then the download was able to happen.
    Apple needs to amend the Repair Permissions programme in Disk Utility to ensure that the above directory ( ~/Library/iTunes ) is Read/Write for Staff or users won't be able to carry out iPhone updates.
    I haven't had a chance to try the new printing features, however, my Bluetooth headset performance is dramatically improved with the iOS 4.2.1 update.

  • Unable to connect iPhone 6 and iPad mini via bluetooth for handoff iOS 8.1

    Hi,
    I have been trying to use handoff(Continuity)  between my iPad mini and iPhone 6 both using iOS 8.1.
    I managed to be able to do it with iOS 8 with a 5c instead of a 6 but now my iPad can not be detected on my phone and vice versa and if they do appear they will not connect and then disappear off the list.
    Its a shame one of the main features I was looking forward to I am unable to use (I can't even use it on my mac because it is outdated!)
    Is there anyway to get around this?
    Also I know this is off topic but I travel on trains a lot and my iPad mini is not cellular if I can get handoff working again is it possible to still use the sms forwarding feature?
    Thanks,
    Bruce

    Your post reads like you think that you are reporting a bug to Apple but be advised that this is a user-to-user technical help forum. You aren't talking to Apple here just other users like yourself. This isn't a bug reporting forum.
    To report a problem to Apple use: http://www.apple.com/feedback/ipad.html
    Be advised, however, that I and many others are using iOS 6.1 with WPA2-secured WiFi networks with no problems at all. (iPad 3, iPad 4, iPhone 5)
    Did anyone suggest checking if the firmware in your Comcast router is up-to-date or suggest something as simple as restarting the router by removing power to it for 30 seconds?

  • I can't update iTunes without an upgrade of OS? Unable to connect iPhone 4??

    Okay, seriously.
    I have been having issues with my phone and I finally just got it to work again and I decided now would be a good time to back it up. However on plugging it in (I updated to iOS 7 yesterday) I was instructed that I needed to upgrade to iTunes 11. When I attempted to download it, I was then told that I needed to UPGRADE to OS 10.6.8 where as I am running 10.5.8.
    Does this actually mean that I can no longer connect my iPhone?

    that's correct. new software = new compatibility. luckily for you, there is a solution (unlike others).
    purchase 10.6.8
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • HT201269 I am unable to connect iPhone to iTunes through my PC. I get msg "unable to connect device iPhone timed out"

    iPhone times out before connection to iTunes via PC.

    Hello Atn2
    Check out the troubleshooting in the article below. You issue may stem from not being able to back up your iPhone before syncing can occur. Check out the article below to resolve issues with that error.
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    Regards,
    -Norm G.

  • TS1398 I am unable to connect iPhones to our home wifi. Other devices work fine.

    Recently, I was having issues with our D-Link Dir-665. I did a factory reset to it on the routers settings (ie. 192.168.0.1). I was able to succsessfully connect my laptop, as well as our Kindle Fire HD. However, when trying to connect our iPhones (4 & 4s), it does not even see the SSID. So, we tried setting it up under "other network" and it says "Could not find network". After searching some other forums we also ended up reseting the network settings, hard resets and syncing the devices as well. All to no avail. . The router gives the option to add the device but requires a PIN from the devices (not really sure if this will even help)...
    When I reset the router I am sure it probably reset things like the WPA and channels etc. I am pretty lost at this point. Help
    Thanks

    I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.

Maybe you are looking for

  • Can I run two iCloud accounts on my computer

    Okay, so my office decided to link 1 icloud account to all its exsiting macs which will be a lot easier when it comes to purchasing apps to install, reminders, calendars etc. However, my manager wants his personal macbook to be connected to the offic

  • Mac mini displays

    What is the largest screen size the mini can support.

  • A mackbook, a pc laptop, and... which external hard drive???

    I have two laptops; one is a Mac and the other a PC. My wife and I have a good collection of music together, but each of us has our own iPods and playlists. Therefore, with my modest knowledge I thought it would be a good idea to have an external sha

  • How can I display a  tree structure?

    I would like to display a tree stucture, but don't want to use the JTree look. I would like the tree to look something like the following (but with boxes around the names, and arrows point from children to parent):             --- child1 root ---|   

  • Authorisations for a user in SM59

    Hi, I am in the process of configuring a SM59 ABAP connection  between two systems say A and B I have created user id in the System A and B I wanted to know teh roles and authorisations, to be present for a user to be used in SM59 ABAP Connection I d