Unable to connect my Macbook to a network printer
Hi,
My problem is specific to Canon iR2016 printer model which is connected to a router which in turn is connected to a wireless router. I want to connect my macbook pro to this printer, which somehow I am not able to.
Till now I have gone to "Print & Fax", clicked on "+" sign, then clicked on the "Windows" tab. There I can see the network printer listed. I select it, then asks for software driver or printer model. Now here I select Printer model, but my model iR2016 is not listed. Then I select generic Post script printer and Add. The printer gets added, but when I print, nothing prints. I also tried with generic laser printer option, but no luck.
Look forward to feedback.
Thanks.
Checking the Canon Australia web site the iR2016 lists UFR2 and PCL5e/PCL6 as supported print languages. Postscript was an option and given that the Generic PS did not work then it would be safe to assume that this option is not installed.
If you have installed the UFR2 v1.80 driver then you add this printer by selecting More Printers > Canon IP (UFR II). If you have installed the v2.xx driver then you simply select IP > LPD for the protocol. This then requires you to enter the IP address of the iR2016 and then you can browse for the iR2016 in the Print Using menu. However this is for a direct IP connection. You cannot use the UFR2 driver via the Windows share, which you mention trying.
So if the printer has its own Ethernet connection to the network then select to add the queue using IP > LPD, enter the IP address of the iR2016 and in the Print Using menu type 2016 to filter the list to the correct model. It should show UFRII in the name. Select this and you should be able to print.
Similar Messages
-
iPad 2 doesn't recognise my password for wifi. Unable to connect. Tried resetting the network,changed the wap settings,nothing. Pswd is 9 characters. MacBook and iPhone accepts the password, not my ipad 2
Hey brainmasala,
Thanks for using Apple Support Communities.
Sounds like you are not able to connect to a Wi-Fi network with your iPad. This article has a section for Unable to connect to a Wi-Fi network and the second article is the recommended network settings. If after these it still has the same issue you may want to restore the device to factory settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a nice day,
Mario -
How do i connect my MacBook Air to a Printer on my Wireless Network
How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.
Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide. -
Unable to connect new macbook pro to wifi
Unable to connect new macbook pro to wifi network
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
How to connect my MacBook to a hp printer on windows network?
Please help! I had my MacBook connect to my hp 1200 series printer wireless on a windows network. It was working fine for a few weeks. Then yesterday it just stop printing. I can find the printer on my Mac and it sends the message to print and the printer turns on but nothing happens. I have another laptop on the network a Dell computer and it prints fine wirelessly. I originally connected the printer on the MacBook Thursday print/fax then when to + and windows icon found the shared computer then printer then add it and worked. Please help!!!
Take the Mac to the printer and use the USB cable.
Call your respective IT person for support. -
HP Deskjet 3050 - Unable to connect to WPA secured wireless network
Hello,
My first post here so please excuse any faux pas on my part. I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since. I'd be really grateful if someone could possibly advise on how I can resolve this.
I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue. I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer. If I disable the security, the printer connects fine.
I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled. The router is broadcasting on 802.11G/N mixed mode.
I'm installing the software supplied on the setup CD on a Windows XP SP3 system. I have confirmed that the network the PC and printer are connected to are the same.
A question as well, if I may: I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010. The release notes indicate improved networking, but don't elaborate beyond this. Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
Finally, just a note that I'm partially sighted and am using a screen reader on all systems. I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
Thanks in advance for your help, which I really will appreciated.
Have a pleasant day,
All the best for now and take care,
Hussein.
It's not the fact it can't be done, it's the fact it hasn't been done, yet.
This question was solved.
View Solution.HI,
firstly, apologies for the delay getting back to you. Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved. It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
To resolve the problem, I did the following:
1. Disable all security options for the network, so it's just an open network.
2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
3. Locate the printer's IP address. I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
5. Under the advanced options, configure the settings for the network, including security protocol and passphrase. Remember to enter the SSID of the network exactly as configured on the router.
6. Apply the settings and log out of the printer's control panel.
7. Log back into the router's control panel and re-apply the security options. Be sure that they match those match those entered for the printer.
Hopefully this will be of use to others in the same position.
Thanks again for your time.
Best,
H.
It's not the fact it can't be done, it's the fact it hasn't been done, yet. -
Unable to connect Panasonic HDTV to home network via Wi-Fi
I am unable to connect my Panasonic TC-L37E3 to the internet via Wi-Fi. I purchased the additional Wi-Fi adapter for the set, and while setting up the connection I am able to see my wireless network on the TV.
I have a basic WEP key, but I am unable to connect to the network via any of the connection options given. For every option there is a two minute timeout which is the eventual result of each connection attempt.
My router is 9100EM, with at 10M/2M service plan. I am unable to connect the TV directly to the router via CATV since it is a considerable distance.
Has anyone experienced a similar issue or can suggest any troubleshooting actions?
Any help is greatly appreciated!Try switching the router off of WEP and onto WPA2. There is a WEP Setting regarding Authentication that allows for Open or Closed authentication, but even then, devices expect Open. WPA2 is faster and more secure, and it's a good bet that the TV will work once you switch the router over.
You can change the security settings by going to http://192.168.1.1/ and logging in using admin as the username, and your router's serial number as the password. In the Advanced Wireless Settings, you'll find the option for WPA2. Enable that option with Pre-Shared Key and set a Passphrase (if one is not already set), and then set up your devices to use that Passphrase (is case sensitive) once you apply the settings.
========
The first to bring me 1Gbps Fiber for $30/m wins! -
Hi,
I have a Dell Latitude E6440 running Win 7
Enterprise 64 on a domain. It will connect to any unsecured network, and it can see the secured network in the list when I click the wireless connection icon on the system tray. When I go to manage wireless networks, the secured network does not show
up (and thus, I cannot delete the network to try to re-add it). Normally, we would add the secure network here. I click Add, give the name in the correct syntax, add the needed information (WPA/2-Enterprise, EAS or TKIP), and hit Next, it immediately returns
with "An unexpected error occurred". A similar thing happens when I hit Connect from the list of available networks that pops up when I open the system tray icon: it says it was unable to connect, when I hit troubleshoot, it says that it could not
identify the problem. The event log shows the error below. I haven't been able to find any resolutions here or elsewhere that address the fact that I can connect to unsecured wireless networks, but not secured wireless networks.
Other notable troubleshooting steps:
Uninstalled/Reinstalled wireless adapter with the latest driver
Other laptops are able to access the same secure wireless network
The first WLAN-AutoConfig error in the event log was Event ID: 12013, attempting a 802.1x authentication. Then Event ID: 11006; stating "Explicit Eap failure received". After a few days of alternating all 3 errors, they started to only error on
Event ID 8002.
Log Name: Microsoft-Windows-WLAN-AutoConfig/Operational
Source: Microsoft-Windows-WLAN-AutoConfig
Date: 6/4/2014 11:53:55 AM
Event ID: 8002
Task Category: AcmConnection
Level: Error
Keywords: (512)
User: SYSTEM
Computer: [COMPUTERNAME.DOMAIN]
Description:
WLAN AutoConfig service failed to connect to a wireless network.
Network Adapter: Intel(R) Centrino(R) Advanced-N 6235 Interface GUID: {f27af762-dff8-4927-84e0-7f4ade30dcc9}
Connection Mode: Connection to a secure network without a profile Profile Name: [SECURE NETWORK NAME]
SSID: [SECURE NETWORK SSID]
BSS Type: Infrastructure
Failure Reason:The specific network is not available.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WLAN-AutoConfig" Guid="{9580D7DD-0379-4658-9870-D5BE7D52D6DE}" />
<EventID>8002</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>24010</Task>
<Opcode>191</Opcode>
<Keywords>0x8000000000000200</Keywords>
<TimeCreated SystemTime="2014-06-04T16:53:55.956762800Z" />
<EventRecordID>1475</EventRecordID>
<Correlation />
<Execution ProcessID="432" ThreadID="5348" />
<Channel>Microsoft-Windows-WLAN-AutoConfig/Operational</Channel>
<Computer>[COMPUTERNAME.DOMAIN]</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="InterfaceGuid">{F27AF762-DFF8-4927-84E0-7F4ADE30DCC9}</Data>
<Data Name="InterfaceDescription">Intel(R) Centrino(R) Advanced-N 6235</Data>
<Data Name="ConnectionMode">Connection to a secure network without a profile</Data>
<Data Name="ProfileName">[SECURE NETWORK NAME]</Data>
<Data Name="SSID">[SECURE NETWORK NAME]</Data>
<Data Name="BSSType">Infrastructure</Data>
<Data Name="FailureReason">The specific network is not available.</Data>
<Data Name="ReasonCode">163851</Data>
<Data Name="ConnectionId">0x6</Data>
</EventData>
</Event>check this article:http://technet.microsoft.com/en-us/library/cc735927(v=ws.10).aspx
also could contact your domain administrator to ask for help. -
Hi. I am having problems connecting to the wifi at my caravan site. My iPad recognises the connection but when I put the password in correctly it says it cannot connect. I have reset my network settings in general but it has made no difference . Any ideas?
Some may not be applicable.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Unable to Connect to Oracle VMs from network
Hi,
I have problem connectivity problem in my virtual machines.I am unable to connect to XEN VMs from my network. But my domU is visible in my route in the network as an attached device with the correct mac address. But I am unable to connect to other computers from my domU and vise versa. Please help.
Output of ifconfig from dom0 is given below
eth0 Link encap:Ethernet HWaddr 00:0C:29:8C:E2:B3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1051 errors:0 dropped:0 overruns:0 frame:0
TX packets:493 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:96109 (93.8 KiB) TX bytes:76110 (74.3 KiB)
Interrupt:17 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:38762 (37.8 KiB) TX bytes:38762 (37.8 KiB)
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:71 errors:0 dropped:0 overruns:0 frame:0
TX packets:350 errors:0 dropped:37 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:8906 (8.6 KiB) TX bytes:31618 (30.8 KiB)
xenbr0 Link encap:Ethernet HWaddr 00:0C:29:8C:E2:B3
inet addr:192.168.100.32 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe8c:e2b3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1096 errors:0 dropped:0 overruns:0 frame:0
TX packets:432 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:89115 (87.0 KiB) TX bytes:67364 (65.7 KiB)
Output of brctl show is
bridge name bridge id STP enabled interfaces
xenbr0 8000.000c298ce2b3 no vif1.0
eth0
output of ifconfig from domU is
eth0 Link encap:Ethernet HWaddr 00:16:3E:6E:64:3C
inet addr:192.168.100.33 Bcast:192.168.100.255 Mask:255.255.255.0
inet6 addr: fe80::216:3eff:fe6e:643c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:479 errors:0 dropped:0 overruns:0 frame:0
TX packets:71 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:43609 (42.5 KiB) TX bytes:9900 (9.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:329 errors:0 dropped:0 overruns:0 frame:0
TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24394 (23.8 KiB) TX bytes:24394 (23.8 KiB)
My vm.cfg file looks like
bootloader = '/usr/bin/pygrub'
disk = ['file:/OVS/seed_pool/OracleDB/System.img,xvda,w',
'file:/OVS/seed_pool/OracleDB/oracle11g_x86_asm.img,xvdb,w']
memory = '2048'
name = 'OracleDB'
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0']
vif = ['bridge=xenbr0,ip=192.168.100.33,type=netfront,mac=00:16:3E:6E:64:3C']
vif_other_config = []
xend-config.sxp has following two lines:
(network-script network-bridge)
(vif-script vif-bridge)
Please let me know if any other information is needed.
Thanks,
RuchinI have a Dell Power Edge Server with 1 network card. I have installed VMWare ESXi 5 on it. Created several Windows 2003 Servers Virtual Machines. Networking is working fine all these windows machines. On one of the virtual machines I have installed Oracel VM Server 2.2.2 (Dom0) and on top of it I am trying to install Oracle VM Template for Oracle 11g provided by Oracle. I am having connectivity issues on the Oracle 11gDB (DomU). I can ping and ssh from Dom0 to DomU and vice versa. But I cannot connect the Oracle DB machine from any other machine. I can connect the Oracle VM Server (Dom0) from other computers in my network.
Any clue what the issue is ?
Thanks,
Ruchin -
Unable to connect to a particular WIFI network
I am unable to connect to a particular wifi connect via my laptop which has windows 7 installed. The WIFI is password protected and I know the password, I am able to connect to that network using my mobile phone and other friends laptop.
I have also checked the router configuration to check my Wireless MAC is not blacklisted. The same laptop is able to connect to other WIFI networks without any problem. The problem is not with wifi drivers because I am able to connect to WIFI networks...
Is there any other configuration in the router that is preventing my laptop WIFI from getting connected ?
http://www.geocities.com/preetam_ghosh87/mysite.htmHi,
Did you get any error message when you can’t connect to the Wifi? Can you find any related information in the Event View?
You can make the computer connect to others Wifi and check if it works.
Regards.
Spencer
TechNet Community Support -
HT3669 Help please: Unable to connect HP4350 Laser Jet to network
I just purchased the printer today (replaced an exact same printer) but am unable to connect it. The printer is not appearing in the “Nearby Printers” list so I tried to manually add it with the IP address but keep getting message: “Unable to verify the printer on your network. Unable to connect to “......” due to an error. Would you still like to create the printer?” I tried, & said continue but it does not work, printer que says “Printer not connected” I feel like I must be just missing a simple step. I went through & reset the printers, did the disk utility, unplugged everything, shut off & restarted & NO LUCK! Help Please! I have spent all afternoon trying to figure this out & am regretting not submitting my issue on here sooner...
Thank you!How do you know what the IP address is?
-
Unable to connect to wifi satellite dish network
I am unable to connect to my wifi which is a satellite network.
Why? What happens when you try? Does it need a password? Do you know it?
Are you sure it has Wifi?
More details would help us better understand the problem. -
Hi,
ive got a Iphone 6+128
after update to 8.3 its impossible to connect to wifi at home network. (message wrong password or unable to connect)
but its ok to connect at office wifi network
What should i do ? ) help me pleaseHey Alex,
If you are having an issue with being unable to connect to your home Wi-Fi network from your iPhone, I would suggest that you troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L
Maybe you are looking for
-
I have the STRANGEST problem with coverart on my iPod!
Hello everybody, I have a problem with my iPod video (30GB), wich I have had for 2 years. All of a sudden it's having problems displaying coverart! It shows all coverart correctly, EXCEPT of artists with names ranging from 'Ai...' to artists starting
-
My ipod wont turn on also wont charge. Could this possibly be my motherboard? If so, could i get it fixed at what cost?
-
High load, database hangs
It happened that load became very high. There were 7 processes usally taken a second, but that time taken hours of CPU time and unable to complete. After I killed those processes, situation came back to normal. I didn't find any error in alert file.
-
Single Web Dispatcher listening different TCP port
Dear experts, I would like to post a question regarding Web dispatcher. Our present environment has a Web dispatcher binding to single domain which is VeriSign Certified. We have received a requirement to support another CA for SSL authentication at
-
Can We Install Oracle 9i without Apache ? How ?
Hi, We have already Web Logic Web Server and Application Server in out Server, and when i try to install Oracle 9i, it always forces us to install Apache Web Server ? Cen we install Oracle Without Apache ? If so How to do it ? Urjent, Pillai.